c wrap label used for sale

Geared motor, electric motor, electric geared motor -Speed: 116 rpm -Power: 0.25 kW -Diameter: Ø 16 mm -Design: B5 -Protection class: IP 54 -Number: 5x motors available Price: per piece -Dimensions: 340/180/H145 mm -Weight: 9.8 kg

Spiral kneader, Fabr. Boku, Type MK 240 Ak-CSDT

Saugdepanner, Fabr. Capelleveen, Type CAPGRIP CAD

Inv. Num. : 6907 Type: B/90 Producer: Curvatubi Generated:- Parameters: Tube diameter: 50-60 mm

Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter -Handover in the current condition as seen -Condition: see pictures (not complete) -Diameter: 325mm -Inserts: Carbide -Intake: SK50 -Dimensions: 325/325/H210 -Weight: 28.8kg

Manesty coating pan 150Kg coating pan, copper pan, 3Ph

Socket distributors, site power distributors, connection cabinet -Equipment -Circuit breaker -Main fuse -1x socket: 16 A -1x socket: 32 A -Schuko: 3 -Dimensions: 270/280/H340 mm -Weight: 8 kg

Punching units, punching unit, punching frame, punching tool, non-driven latch and shear units, forming frame -Transfer in current condition as seen -1x: punching bracket as shown in the pictures -Manufacturer: CEWE -1x: type LWS 35-150 -Dimensions: 300/80/H220 mm -Weight: 13 kg

cross-section width:: 800 mm cross-section heigth:: 15 mm feed:: ab ca. 5 mm speed of feed:: m/min cuts max.:: Schnitte/m condition: used, overhauled Specification: Panel cutting machine - overhauled with CE - Section width max.approx.: 800 mm - Section height max.: 15 mm, depending on the hardness of the rubber sheets - Cutting length from approx.: 5 mm (depending on material) - cutting force approx.: 10 tons - Connected load approx.: 1.8 kW - Painting: green - Operating voltage: 3 x 400V, 50Hz, N, PE - Dimensions approx.: 1,200 x 1,450 x 1,950 mm - Safety devices according to current standards, - New on-board system machine, - New control cabinet with PLC system Siemens S7-1200, - CE marking, - Instructions for use and maintenance in English or German language The data for this ad was created with ModulMWS - the s ...

Repair and Exchange service Repair and replacement service SERVICE MAZAK MITSUBISHI NETZTEIL POWER SUPPLY MDS-B-CVE-150 – Repair price depending on the effort. Max. 1400 – € Through our Mazak machine simulators, we are able to test almost ALL Mazak Mitsubishi power supplies under load. Long-term tests are also possible. We repair your Mazak Mitsubishi power supply at a flat rate or at cost. The amount of work is about 1-3 days. Urgent repairs are also possible. The warranty on the repair is 6 months. Repairing other power supplies on request If you are interested in our articles or have any questions, please contact us.

Tumbler Iglu Scheid with cooling Volume: 250 liters Dimensions: 140x120x195cm Electrical power: 6.5kW/13kW

Dosomat cup filling machine, type: 10/3, diameter cup: ø 83 mm x 30 mm, overall dimensions: 1810 mm x 1700 mm x 2050 mm.

Gear motor, electric motor, electric gear motor -Speed: 45/90 rpm -Power: 0.16/0.3 kW -Diameter shaft: Ø 20 mm -Construction: B3 -IP protection -Dimensions: 360/160/H175 mm -Weight: 14 kg

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Dimensions: 355/167/H230 mm -Weight: 23.7 kg

Line filter for frequency converters -Manufacturer: Corcom -Type: 80FCD10B -Number: 1x filter available -Price: per piece -Dimensions: 310/170/H140 mm -Weight: 8 kg

suitable for nitrogen all stainless steel belt width ± 600 mm nett belt length ± 6.000 mm dimensions (l x w x h) : ± 7.600 x 1.500 x 2.300 mm

Electric motor, three-phase motor -Power: 1.5 kW -Speed: 1420 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: IP 55 -Dimensions: 360/260/H200 mm -Weight: 32 kg

Electric motor, three-phase motor -Power: 0.75 kW -Speed: 1400 rpm -Shaft: Ø 19 mm -Construction: B5 -Protection class: EX -Dimensions: 315/260/H200 mm -Weight: 24.6 kg

Gear motor, electric motor, electric gear motor -Speed: 24.8 rpm -Power: 0.37 kW -Diameter hollow shaft: Ø 30 mm -Construction: hollow shaft -Protection class: IP 55 -Brake -Dimensions: 340/290/H210 mm -Weight: 21 kg

Electric motor, three-phase motor -Power: 6.8 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B5 -Protection class: EX -Number: 3x available -Price: per piece -Dimensions: 470/360/H300 mm -Weight: 75 kg

Gear motor, electric motor, three-phase motor -Speed: 30 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Dimensions: 385/160/H255 mm -Weight: 12 kg

Double bench grinder, bench grinder, column grinder, column grinder -Motor power: 1.35 kW -Speed: 1500 rpm -Max. Grinding wheels: Ø 300 x 40 mm -Operating voltage: 380 volts -Dimensions: 730/400/H1075 mm -Weight: 156 kg

Gear motor, electric motor -Speed: 107 rpm -Power: 0.75 kW -Construction: B5 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 54 -Brake: 380 V -Number: 1x motors available -Price: per piece -Dimensions: 490/240/H220 mm -Weight: 24 kg

Gear motor, electric motor -Speed: 31 rpm -Power: 0.55 kW -Brake: 380 V -Construction: B3 angle -Diameter hollow shaft: Ø 25 mm -Protection class: IP 45 -Number: 1x motors available -Price: per piece -Dimensions: 510/228/H260 mm -Weight: 25 kg

Gear motor, electric motor, three-phase motor -Speed: 93 rpm -Power: 0.55 kW -Construction: B3 angle -Diameter hollow shaft: 24 mm -Protection class: IP 45 -Dimensions: 220/240/H525 mm -Weight: 23 kg

Electric motor, three-phase motor, brake motor -Power: 1.8 kW -Speed: 1430 rpm -Shaft: Ø 24 mm -Hole circle: Ø 165 mm -Rezess: Ø 130 mm -Construction: B5 -Brake -Price: per piece -Number: 2x available -Dimensions: 430/200/H260 mm -Weight: 30 kg

Three-phase motor with 2 speeds, electric motor -Power: 1.3/1.8 kW -Speed: 700/1440 rpm -Shaft: Ø 28 mm -Design: B5 -Protection class: IP 44 -pole-reversible -Price: per piece -Quantity: 1 available -Dimensions: 500/300/H250 mm -Weight: 54 kg

Three-phase motor, electric motor -Transfer in current condition as seen -Foot defective, see photo -Power: 7.5 kW -Speed: 1430 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Dimensions: 510/370/H340 mm -Weight: 110 kg

Gear motor, electric motor, three-phase motor -Speed: 28 rpm -Power: 0.25 kW -Construction: B5 angle -Diameter hollow shaft: Ø 24 mm -Protection class: IP 45 -Dimensions: 460/215/H160 mm -Weight: 18 kg

electric motor, three-phase motor -Power: 1.5 kW -Speed: 1410 rpm -Shaft: Ø 22 mm x 60 mm -Design: B5 -Protection class: - -Flange diameter: 254 mm -Recess diameter: 180 mm -Dimensions: 380/305/H250 mm -Weight: 32 kg

Three-phase motor with 2 speeds, electric motor -Motor: is unused -Power: 12.5/18.5 kW -Speed: 970/1460 rpm -Shaft: Ø 55 mm -Construction: B3 -Protection class: IP 55 -pole changing -Dimensions: 740/390/H450 mm -Weight: 148 kg

Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Manufacturer: FESTO -Type: CPV10-GE-FB-8 -Electrical connection -Dimensions: 195/125/H80 mm -Weight: 1.2 kg

Foot valve, foot pedal, 5/2 way valve, solenoid valve, hydraulic valve, oil valve, pressure valve, valve block, control block -Manufacturer: David Brown Hydraulics -Type: C9193430351 -Type: SNF05 137 -Quantity: 1x valve available -Weight: 1.1kg

Three-phase motor, electric motor, motor for saddle stitcher, saddle stitcher, speed-controlled, speed-regulated -Power: 1.1 - 5.5 kW -Speed: 420 - 2100 rpm -Shaft: Ø 30 mm -Construction: B3 -Protection class: IP 21 -Dimensions: 860/430/H480 mm -Weight: 244 kg

Electric motor, three-phase motor with 2 speeds -Power: 0.55/0.75 kW -Speed: 945/1410 rpm -Shaft: Ø 19 mm -Brake -Construction: B5 -Protection class: IP 54 -pole changing -Dimensions: 400/200/H230 mm -Weight: 25 kg

Gear motor, electric motor -Speed: 35 rpm -Power: 0.75 kW -Construction: B3/5 -Diameter shaft: Ø 40 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 660/235/H280 mm -Weight: 66 kg

Gear motor, electric motor, electric gear motor -Speed: 60 rpm -Power: 0.45/0.55 kW -Construction: B3 angle -Diameter shaft: 24 mm hollow shaft -Protection class: IP 54 -Number: 1x motors available -Price: per piece -Dimensions: 530/200/H240 mm -Weight: 31 kg

Three-phase motor, electric motor -Power: 5.5 kW -Speed: 1425 rpm -Shaft: Ø 28 mm -Design: B3 -Protection rating: - Quantity: 1 piece available -Dimensions: 420/320/H290 mm -Weight: 54 kg

Three-phase motor, electric motor -Power: 5.2 kW -Speed: 1440 rpm -Shaft: Ø 38 mm -Construction: B3 -Protection class: - -Price: per piece -Number: 1x available -Dimensions: 450/340/H270 mm -Weight: 65 kg

Gear motor, electric motor, electric gear motor -Speed: 132 rpm -Power: 0.37 kW -Diameter shaft: Ø 25 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 455/230/H220 mm -Weight: 30 kg

Laboratory power supply, power supply unit, voltage generator, laboratory power supply device -Input: 230 volts -Output: 100-415 volts -Dimensions: 320/170/H130 mm -Weight: 3.2 kg

GRP barrel, storage container, storage container, silo system, tank, fertilizer storage silo -Material: GRP -Storage silo: 750 liters -on: stand -Mannhole -Dimensions: 1650/920/H900 mm -Weight: 130 kg

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 32 mm -Outer: Ø 200 mm -Width: 6 mm -Price: per piece -Number: 2x available -Weight: 0.4 kg

Gear motor, electric motor -Speed: 46/92 rpm -Power: 0.7/1.1 kW -Construction: B3 -Shaft diameter: Ø 30 mm -Protection class: IP 33 -Weight: 31 kg

Gear motor, electric motor -Speed: 295 rpm -Power: 0.75 kW -Design: B5 -Diameter shaft: Ø 25 mm -Protection class: -Price per piece -Quantity: 2x available -Weight: 22kg