c combuster used for sale

CATERPILLAR/ MWM type TCG 2020 V12 -> 0.999 MWe. The engine and generator are fully operational. Engine mileage - approximately 33000h. Year of manufacture 2015; fuel: natural gas / biogas Generator: Manufacturer MARELLI MOTORI SP. A type MJB 500 MB4; CODE MJB5042K33380; No. MC 16586; year of manufacture 2015. Control cabinet complete with panel. Engine taken out of service with the customer in August 2022 due to the purchase of a new one. The engine has no visible signs of leakage. If interested, I can send a real -film on WhatsAp.

Overhead crane, crane, electric hoist, lifting device, motor winch, motor winch, tackle, winch, pulley system -Rated load: 2,000 kg with pulley -Lifting speed: 5/15/30 m/min -Steel cable: Ø 8 mm -Lifting height: approx. 30 m -without operation -Dimensions: 1600/330/H470 mm -Weight: 356 kg

L 22 Kw POWER 330 Kg/h (material-dependent/full load) Active process and computer-controlled Koller PP 300 is a pellet line consisting of the following machines: - DOSING SYSTEM with an automatic PLC control from the feed of the ground material incl. rotary valve - Hammer mill with sieve 6 mm for the wood chip raw material - Pellet mill with main motor 22 kW with automatic hydraulic control system (Eur.Pat. EP1619012B1). Patented system. The pressing process is completely monitored by a controller and monitored via mobile phone. incl. minisilo for loading with level sensor; Safety system for controlling the clogging of the matrice Moisture monitoring - Cooling and dedusting system for the pellets produced via a screw

Clever titulator with steam tunnel. 2 pieces available Year of construction 2004 and 2005 Type: GS 501 Capacity: 11,000 fl./h > 18,000 fl./h

roll diameter: 550 mm roll length: 1500 mm rolls drilled: peripher Nip adjustment: hydraulisch 0 total power requirement: 90 kW Condition: used, overhauled Specification: rolling mill 550 x 1500 mm - used - roll diameter: 550 mm - roll length: 1500 mm - monoblock - motor under the rolls - Fixed friction between the rolls - Rolls: peripherally drilled, for water cooling - Gap adjustments: NEW hydraulic - Hydraulic unit: NEW - tiltable steel material guide jaws - Rollers: mounted on bronze bushes with oil circulation lubrication via pump - new ball bearing slewing rings for connection to water circuit - Safety brake for EMERGENCY STOP - New AC motor 110 kW - 400 V - 50 Hz - New pan for receiving the mixture - Safety bars bi-directional - New electrical control cabinet with PLC system S7-1200 - New frequency converter for 110 kW, f ...

Pausch X-ray imaging workstation Compact CS 3000 with the following system components Generator Genesis DT_Baujahr 2017 Tube RAD 14 0,6/1,2 Fa. Varian Vertical tripod BS 2000 • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by t ...

Carestream (Kodak) Full Leg Spine Mount Tripod DirectView CR with 4 Kodak GB cassettes • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Carestream Storage Sheet System (CR) DirectView CR 975 with: 2x control panel 24 cassettes: 18x24 - 7pcs./ 24x30 - 8 pcs./ 35x43 - 9pcs. • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg / Germany. It is packed on pallets, professionally lashed and wrapped with stretch film and can be picked up immediately • You buy the system in "ACTUAL" condition from the warehouse Freiberg (EXW), Saxony, Germany, and advance payment. • The sale takes place as "used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite full functionality without guarantee. • The installation, commissioning and configuration of the system or the system components must be carried out by the manufacturer or by a specialist or technician authorized by the manufacturer!

Asynchronous motor, main spindle drive, 2AD100C-B05OB1-AS03-C2N1, R911246799, Rexroth, new Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is completely as new and in the original packaging. - Asynchronous motor, main spindle drive - Power: 12.6 - 18.9 KW - 380V / 3 pol. - 3000 - 9000 rpm - 40 Nm - 32 A - 58 kg Functional guarantee! For second-hand parts, we cannot provide a conventional guarantee and warranty. However, we give you a functional guarantee. If the device does not work during commissioning, you can return the goods and we will refund the purchase price.

Line regulating valve, shut-off valve, ball shut-off valve, ball valve, ball valve, pressure relief valve. Shut-off valve -Manufacturer: Castel, collector valve/valve membrane, unused in original packaging -Type: 6110/22 -Price: per piece -Number: 5 piece -Dimension box: 100/50/H40 mm -Weight: 0.1 kg/piece

Power supply unit, converter, power supply, switching power supply -Phoenix Contact: TRIO-PS/1AC/24DC/10 -Input: 100-240 V -Output: 24 V -Price: per piece -Number: 2 pieces -Dimensions: 160/60/H130 mm -Weight: 1.4 kg

Manufacturer: CATERPILLAR Model: G3516B LE Type: Stationary to Gas Working Cycle: 04 times water cooled Nominal Rotation: 1,800 RPM Number of Cylinders: 16 Cylinders, arranged in V Piston diameter --mm: 170 mm Piston stroke -mm: 190 mm Engine Volume: 69 Liters Compression Ratio: 11.1:1 Suction: Turbocharged, Post-Cooled Fuel System: Electronic Ignition System Quantity: 02 units

Stick electrodes 4.0 x 450 -Type: 35056 -Weight per package: 5.6 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 3 kW -Voltage: 380/660 V -Speed: 2870 rpm -Volume flow: m³/h -Connection input: Ø 310 mm -Connection output: 400 x 200 mm -Dimensions: 1000/680/H1030 mm -Weight: 254 kg

Available in stock 1 x NEVER USED Capstone Igniter (P/N 516853-001). The equipment was NEVER USED and it is sold inside the original packaging. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 1 x Used Capstone TET. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

Available in stock 5 x Used Capstone Smart Proportional Valves. We have the following units available: - 3 x SPV Assy P/N 503044-200 complete with gaseous fuel valve P/N 506617-100 (Op. Press. 50 PSIG / Proof Press. 3500 PSIG); - 1 x SPV 25 24VOLTS P/N 511978-100R complete with gaseous fuel valve (Op. Press. 0-100 PSIG); - 1 x GSPV 12VOLTSD P/N 509736-100 complete with gaseous fuel valve (Op. Press. 75 PSIG / Proof Press 3500 PSIG): The unit are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.

loading : 75 to 80 % double jacket suitable for cooling or heating up to 75°C with mixing arm all stainless steel tiltable drum outside dimensions (l x w x h) : ± 2.400 x 1.100 x 2.000 mm 3kW PLC control yoc 2017

Wire electrode, SG2 welding wire, welding wire -Type: CuA18 - Wire Thickness: 1.2mm -started role -Weight: 3kg

Sensor, probe, immersion probe -Type: C2S-4/5 -Housing made of: Teflon (PTFE) -Protection class: IP66 -Cable length: 900 mm -Weight: 110 g

Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Type: CPV-14-VI 18210 CPV14-GE-MP-6 -Dimensions: 165/95/H110 mm -Weight: 1.5 kg

3516 Diesel Generator Set Just 1032 WORKING HOURS!

Used double shaft kneader KÖNIG, type: W160 -In bakery condition- - for 160 kg dough - including 1 tank car - other tank wagons on request Visits and test runs are possible by arrangement.

Used bread line W&P -Refurbished- 1) Haton CR-59 Kegerundwirker, heated, lubrication, frequency control, automatic slide 2) Haton AF 2002 proofer, fully automated, digital control 3) Conveyor belt 4) Haton Combi U long roller table, very flexible 5) By-Pass tape to bypass the proofer, directly to the Combi U long roller The entire line is completely overhauled and in perfect condition! Warranty 6 months Please note: The V-300 dough divider is not part of this offer as it is already sold! Alternatively, a RHEON VX 202 Twin Divider can be offered for high-quality Artisan products.

Vacuum filler, make SEN, type: Compacta FWF 30/6, for about 5.000 bph, with 30 filling valves and 6-head nature corker, adjust to 0,7 lt / 0,75 lt "Bocksbeutel"- and 1,0 lt wine bottle, built 1985

Interbus-ST bus terminal -Connection: 24 V DC -with 8-pin: MINI-COMBICON connector -Consists of: Terminal part with screw connection and module electronics -Dimensions: 44/114/H112 mm -Weight: 0.2 kg

Interbus-ST bus terminal -Connection: 24 V DC -9 pin -Consists of: Terminal part with screw connection and module electronics

450mm W x 200mm H Right to Left Conveyor Width 400mm Conveyor Height 840mm Stop on detect Overall length - 1950mm

CNC Thread Rolling Machine - Thread Rolling Machine Thommen PR17 CNC 2 wheels Rotation speed of the rollers electronically controlled Position and speed are managed electronically Spindle diameter 54 mm 2 pairs of columns (closed and open) The machine is in our warehouse in Gussago BS, energized Test run possible Mimu Machine Tools

Brand BENDMAK Type CYL-ST-170-20-5,0 Working lenght 2100 mm Pre-Bending 5 mm Max Thickness 5 mm Top Roll 170 mm Min Bending 255 mm Motor Power 4 kW Bending Speed 4,8 m/min. Dimensions L x W x H 4000 x 1100 x 1130 mm Weight 2300 kg Year 2015 Extra information Cone Bending device Induction hardened rolls Motorized Up and Down movement of the Back Roll Digital readout for Displaying positions of the Back Roll 2 Separte Control Units Cast Iron Body

Shelf tray, spill tray, floor tray, pallet tray, collection container, spill pallet -Collection volume: 220 liters -on: transport trolley -Tub interior dimensions: 1140/730/H270 mm -Price: per piece Quantity: 2 pieces -Dimensions: 1210/800/H570 mm -Weight: 72 kg

Used press for pre-pressing cheese. Technical data: - producer TEWES BIS Barczewo - year of production 2006 - dimensions: overall length 4780 mm, width 1560 mm, height 3850 mm - pressing area 4.33 m3 - internal dimensions of the bath: length 3700 mm, width 1170 mm, depth 730 mm - mass of pressed cheese approx. 1000 kg - thickness of the cheese layer after pressing approx. 250 mm

Polyketting Conveyor belts - conveyors with min. 19 pieces frequency controlled motors for Tetra Pak beverage cartons Approx. 100 meters

Tetra Pak Conveyor belts - conveyors with motors for Tetra Pak beverage cartons Approx. 50 Meters with straight pieces and curves

3 pcs. Pfeiffer Balzers TPU 170 (turbomolecular pump) 3 pcs. Pfeiffer Balzers TCP 120 (controller for TPU 170) 3 pcs. cable for TPU 170 1 pcs. Alcatel Type 5150 (turbomolecular pump) 1 Alcatel CFF 100 (controller for type 5150) 1 Alcatel 5030 CP (turbomolecular pump) Price plus 19% VAT Not tested for functionality. Please see photos for technical data. Can also be picked up.

Containers mit Zubehör für MWM Typ TCG 2020 V12 (bis 1,2Mwe) Es gibt eine vollständige Dokumentation. 2012 Jahr. Nach dem Entfernen des 2020V12-Motors. Es gibt einen Schornstein für das Set. Es gibt keinen Abwärmetauscher, externen Kühler, zwei Module in der Steuerung.

1 x Steam turbine generator 3817 KW KKK Siemens CFR5 G6b 5,000 KWe x 1,500 rpm 50 Hz 6,300 V for sale in operational condition Turbine Manufacturer KKK Siemens Model CFR5 G6b Steam pressure fresh [bar] 64 Dampfdr. Ed. [bar] 8.5 Generator Manufacturer INDAR Model BZK-710-S/A-4 P Generator [KW] 5.000 Turn around. [per min] 1,500 Frequency [per sec] 50 Voltage [V] 6,300 Current [A] 458 Scope of delivery: The system has been completely dismantled and is complete including the control system. Technical documentation: available Spare parts / tools: not available The plant was dismantled in working order. Last major overhaul: unknown Sales are "as is" or after prior inspection by a company engaged by us on request

Mol D'art Heating cabinet Model: MD60 Serial: 6 Heating cabinet, variable temp control, three shelves, internal dimensions 1450mm x 600mm x 900mm, 1Ph

CML moving blade multi-blade model SCA320R-T350 with: - 1 fixed blade + 1 movable blade with motorized positioning - 1 fixed laser + 1 mobile laser, for cutting line display - 350mm belt, useful cutting width 320mm - useful cutting height with movable blade 90mm (120mm without moving blade device) - main engine kW 22 / HP 30 - motorized lifting of the pressor - manual lubrication pump

Engine Make CUMMINS Engine Type C1100 D5 Power KW / kVa PRP 888 / 1110 Fuel DIESEL Generator Model STAMFORD S6L1D F41 Volts 400 Hz 50 Year of Manufacturing 2022 Running Hours 0 NEW

Engine Make JENBACHER Engine Type J 616 GS C02 Power KW 1942 KW RPM 1500 Fuel Natural Gas Generator Model Stamford Volts 690 Hz 50 Year of Manufacturing 1999 Running Hours 15.000

REF-2390 CIM AUTOMATIC DOUGH SHEETER Manufacturer: CIM BAKERY EQUIPMENT S.r.l. Type: ROLLMAX TS 700 Year: 2000 Power: 1kW Voltage: 400V / 50Hz 2 belt conveyors. Dimensions: 660mm width, 1,500mm length (each belt) Overall dimensions: 1,300mm width, 3,650mm length, 1,350mm height

Very robust and compact 1-fold eyelet machine, electric table unit in top condition. Designed for 5.5 mm eyelets. Stock goods, immediately available.

Horizon AFC 746 D - cross folder 16 pages year 2019 Counter 73 million good condition in production available immediately

Booster pump, CR8-140 A-F-A-AUUV, 9,5m³/h, 120m, Grundfos, used Top Used Top! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer. The pump is in top condition. Electric motor Function guarantee! For parts from second hand we can not take over conventional guarantee and warranty. But we give you a function guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

ORT 3RP48 CN CNC / PLC thread rolling machine scaffolding sleeves threading, shelves studs threading electronic overhaul/retrofit Under power in our warehouse in Gussago BS. Test run possible Mimu Machine Tools

Hand sealing machine for sample packaging blister Sealing jaws can be triggered with pneumatic foot switch. Temperature and sealing pressure adjustable. Sealing of one side at a time, max. 150mm width, sealing pattern see picture.

Hello all we have 10 pcs Caterpillar 3512B gen sets available with control panels 1200 Kw - 50 Hz Year of build is 2008 aprox working hours: 12000-15000 Location: Far east Please contact info@fin-marine for information

Valve islands, multi-pin plug connection, directional control valve, solenoid valve, pneumatic valve, air valve, pressure valve -Type: CPV10-GE-MP-8 -Electrical connection -Price: per piece -Number: 2 pieces -Dimensions: 140/120/H80 mm -Weight: 1.4 kg

Cuccolini Vibratory sieve Serial: AR0506 Stainless mesh 600mm diameter, 200kg hopper mounted on top, twin vibrators, comes with two meshs, 3Ph