130,810 used machines on RESALE, but how to find them? Machine Search
Composed of: - Pin mill, manufacturer : Condux, type CST 150 / F, pin disc diameter : 165 mm; - Dosage - Filters - Container approach --> mill housing in stainless steel;
SPECIFICATIONS: - Automatic workpiece blocking pneumatically controlled - Machine for the execution of slots of different lengths and depths for window parts, folding shutters and doors
Hotmelt lamination line BC 62 Nordson Porous coating 80cm-1675mm full line with inline printing unit 2 unwinders, 1 rewinder 1 inline printing unit Hot melt lamination Hotmelt Laminator Hot melt lamination line Hot melt lamination stand Hot melt coating stand Hot melt coating line Nordson BC 62 Porous Coating Coating weight : 0.85-60 g/m2 Web width : 2400mm bm 200 bulk melter tank , heated hoses, hot melt applicator, Metering gear pump station and coating head • Hot melt application gsm : minimum 0.87 gsm/m2 • Hot melt application gsm : maximum 60 gsm /m2 • hot melts: SIS/SBS, PSA,EVA,PUR based
PINETTE PEI Vertical compression press 1500T SMC, closing force 1500T
Key data: 1030 , 400
Available full gas natural power plant of Caterpillar 3516 (1030kW) from 2004 with 70606 hours of working. All the maintenances has been done by official service following the official schedule. The engine stopped working perfectly at full load. Full boroscope inspection is available. Scope of Supply: -Genset -Gas train -Control Panel -Switch braker (alternator + transformer) -Exchanger -Silincer -Refrigeration System (HT Aerofan and LT refrigeration tower) -Oil system The assets are already dismounted on our wharehouse ready to be load or to be inspected. For more information please contact us!
Quality Used Power Plant with two (2) Solar Centaur 40, 3.0 MW, (Each), 13,800v 60 Hz. Enclosed. Equipment Description Complete power plant with 2 turbine generator systems. Everything included The equipment has very little hours since installation. They will need to be moved off the site. They are located in The USA. They were overhauled in 2020 installed and never used. The following is included: Control Panels, New Square D Switchgear, 15kv, 1200 amp. for synchronizing the generators to each other and the grid. Grid protection hardware and software. Inlet system with filter cleaning system New control system Exhaust system complete New Oil coolers Gearboxes have been overhauled Generator ends have less than 800 hours on them, one is new 0.0 hours A control room enclosure complete with all control switches New battery chargers
Key data: 2500 KW, 3125 kVA, 13800 V
Five (5) Quality Used Mobile Caterpillar G3520, 2.5 MW, (Each) 13.8 kV, 60 Hz. Enclosed with Trailer Chassis. · Caterpillar G3520, 2.5 MW, 3125 kVA Continuous, 13,800v. 60 Hz. Natural Gas Generator sets. · Charging Alternator, 24v. 50 amps. · NLA-EPA Certification 1 Gram/BHP-Hr · Generator End Arrangement 3042 Permanent Magnet, 105°C Temperature rise over 40°C Ambient temperature. · Jacket Water Heater 480v. · NLA Electric Prelube Pump · EMPC 4.4 Control Panel · 53” Sound Attenuation Enclosure · Quadruple Axel Trailer Chassis · Cooling System · Exhaust System · Air Filters · Duplex Oil Filters · Fire Suppression Tanks · 24v. Battery Charger · Mobile Natural Gas Generator Sets · Plug & Play · MANUFACTURING YEAR 2023 & 2024 Units are ready for shipment.
cross-section width:: 700 mm cross-section heigth:: 500 mm feed:: -- mm Condition: used, overhauled Specification: splitter for rubber bales - overhauled with CE - cross section width max.ca.: 700 mm - cross section height max. approx.: 500 mm - cutting force approx.: 10 tons - AC motor: 4 kW, 400 V, 50 Hz - Infeed roller conveyor for product transport - Machine stands on a raised pedestal - Two-hand safety control for driving the blade movement - Safety guard according to current standards - New control cabinet - New on-board system machine - Operating and maintenance manual in English - CE marking - Paintwork: according to customer requirements - Refurbished with 1 year warranty - CE marking, Option: - Output roller conveyor new The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
; Gross weight [kg]: 2630; Inspection Date: 2026-02-06; Amount of previous owners: 1; Lift height[mm]: 1000
Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spir ...
Scope of delivery: LTH 603.20 mist eliminator with housing + 6 full cone nozzles 405.228.1Y. AR.00.0 + 15 full cone nozzles 461.248.17.00.00.0 + 2 full cone nozzles 490.926.1Y. CG.00.0 + 1 LTV 400.20 Mist Eliminators + 3 461.048.1Y Solid Cone Nozzles. AK.00.0 + 1 mist eliminator LTH 603.30 + 1 oscillating soot blower PS-P + 1 retractable soot blower PS-HB + 1 oscillating soot blower PS-PB + 6 rear suspension + 6 flanges with reduction DN80 – 65 + 6 screw connections DN80 PN63 + 48 screw bolts LM 20x100 + 1 end bearing (88.9) Inst. 2 + 1 end bearing (88.9) Inst. 3 + 1 end bearing (88.9) Inst. 4 + 2 end bearings (88.9) Inst. 5-6 + 2 feed device 600mm Ø19mm + 1 x 50x59x2 seal, Commissioning part + 1 x 89x95x2.5 gasket, commissioning part + 1 x G1"R1 1/4" bleed valve, commissioning part + 1 x R243 stuffing box, commissioning part + 1 x stuffing box, commissioning part + 1 x DN80 PN63 spir ...
We can offer 2 twin screw extrusion compoundibg lines,manufactured in 2015 diameter 75mm, L/d 40. water circle pellitzer.drive motor power 160kw.short time working, very good condition.Serious buyers contact us. We have many brands and models machines, tell me what you need seriously!
The "Epoch TM" extrusion casting apparatus (wide slot nozzle) has been designed and constructed for the thermoforming of polypropylene (heavy films). Operating fluids PA12, PP For other materials, contact must be made in advance with the manufacturer in order to check the processability. Specifications: Weight 839 kg. ; Power supply 230 V; number of zones cast body 14; Encapsulation block 2; KW total: cast body 21.9 KW; Auto Gauge 730 KW; Cast lip heating 3.4 KW; Additional equipment: internal edge boundaries with fixed length
Maximum removal of impurities. Increased quality of the final product. Extended service life of the operating process. High reliability. Low pressure loss. Service-friendly. Tested according to applicable ISO standards. Filter package Replace filter G85 1/2" residual oil 0.3 mg/m³ after 2000 hours Replace filter C85 1/2" residual oil 0.01 mg/m³ after 2000 hours Replace filter V85 1/2" residual oil 0.003 mg/m³ after 1000 hours Residual oil after filter package 0.003 mg/m³ = technically oil-free + Wall bracket + Connection kit Filter G Equipment in detail Drain: Automatic float drain valve Performance data Nominal capacity 1.42 m³/min Application: Oil Aerosol Oil aerosol concentration in the outlet 0.3 mg/m³ Total mass efficiency >99.25 % Quality class of air at the outlet (oil) 3 according to ISO 8573-1:2010 Pressure loss dry 55 mbar Pressure loss wet 125 m ...
2018 Xeikon 3030 plus 5 colurs digital label press roll to roll Manufacturer: Xeikon Type: 3030 plus Web width: 330 mm Year of production Machine comes with 2 spare developers for Orange and green Key Specifications: Technology: Dry Toner, Full Rotary Print Resolution: 1200 dpi (with 4-bit variable dot density) Web Width: 330 mm (13 inches) Print Speed: Up to 15 meters/min (49.2 ft/min) Colors: 5 (CMYK + Opaque White or Spot/Gamut Color) Substrates: Wide range, including self-adhesive materials (BOPP, PVC, PET), paperboards, and papers (40-350 GSM) Toner: FDA-approved, food-safe Features: Variable repeat length, inline densitometer, potential for inline finishing, metallic label production via ColorLogic, microtext, variable data.
Carl Zeiss Axiovert 40C Inverted Light Microscope The Carl Zeiss Axiovert 40C is a routine inverted microscope specifically designed for the study of living cells and cell cultures in biology and medicine. Due to the inverted design, the objectives are located below the stage, which allows observation in larger culture vessels such as petri dishes or microtiter plates. Technical features Optics: Equipped with the ICS system (Infinity Color-corrected System) from ZEISS for high optical performance in all contrast processes. Lighting: Equipped as standard with a 12V 35W halogen lamp for transmitted light; optionally, an HBO 50 mercury vapor lamp can be used for fluorescence applications (model CFL). Contrast Method: Supports brightfield, phase contrast, and PlasDIC. Camera connection: The Axiovert 40C model has an integrated photo port (C-mount adapter) on the front for di ...
liquid conveyors lubrication unit for 5 Tetra Pak lines, excellent condition
Motor output: 3 kW Filter capacity: 6 m² : 3500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 10000 m³/h Weight: 700 kg Motor output: 11 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weight: 870 kg Motor output: 15 kW : 12,500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
: 8500 m³/h Motor output: 11 kW Filter capacity: 47 m² The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
USED SETRIMEGA 3.5 CELESTER AUTOCLAVE REF.: C5978 General characteristics: Manufactured by CELESTER Model STERIMEGA 3.5 Voltage 220-380 (50 Hz) Power 5 kW Design pressure 2.75 bar Test pressure 4.4 bar
Motor output: 7,5 kW Weight: 450 kg : 6500 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Weight: 280 kg Motor output: 4 kW : 4000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Filter capacity: 16,3 m² Motor output: 5,5 kW : 5000 m³/h The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Perkin Elmer Chemagic 360-D Nucleic Acid Extraction System The Perkin Elmer Chemagic 360-D is an automated benchtop system for the isolation of nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. Key Features and Specifications Technology: The system is based on the patented Chemagen M-PVA magnetic bead technology. Metal rods are magnetized to collect the beads containing the bound nucleic acids and transfer them between different process solutions, minimizing cross-contamination. Sample Volume Flexibility: It offers different "Rod Heads" for different volume ranges and throughputs: 12-Rod Head: For sample volumes from 1 mL to 10 mL. 24-Rod Head: For sample volumes from 200 μL to 4 mL. 96-Rod Head: For sample volumes from 10 μL to 400 ...
CALEVA MODEL 380A STAINLESS STEEL SPHERONIZER REF.: E0013 Used Caleva Model 380A stainless steel spheronizer. Unit has a 380mm diameter bowl. 250g to 5kg batch size with an approximate output of 50kg per hour. Unit is driven by a 1.5kw, 415 volt, 3 phase, 50 hz motor. Mounted in stainless steel cabinet with local controls. General characteristics: Manufactured by CALEVA Model 380A Material Stainless steel Motor characteristics: Voltage 415 V Power 1.5 kW - 2 cv Frequency 50 Hz
Chemagen chemagic Magnetic Separation Module I The chemagic Magnetic Separation Module I (chemagic MSM I) automatically isolates nucleic acids within one hour. Viral RNA from 96 nasal mucosal swabs can be isolated simultaneously. The Chemagen MSM-1 is an automated system for the high-throughput isolation of nucleic acids (DNA/RNA). It uses a patented magnetic bead technology, in which magnetizable metal rods are immersed in the process solutions to efficiently collect the bound particles and bring them back into suspension. Technical Features & Capacity Throughput: The system has a modular design and can process 12, 24 or 96 samples simultaneously, depending on the rod head used. Sample volume: It offers high flexibility for volumes from 10 μL to 10 ml. Processing time: 96 samples (small volumes): approx. 15–60 min. 24 samples (medium volumes): approx. 35–60 min ...
Compact device for automated nucleic acid purification The Perkin Elmer Chemagic 360 is an automated benchtop system for isolating nucleic acids (DNA and RNA) from a wide range of sample materials. It uses Chemagen's magnetic bead technology to extract high-purity nucleic acids for various downstream applications. With dimensions as small as 80 x 80 cm and its unique sample volume flexibility, the Chemagic 360 is an innovative instrument that can be adapted to almost any of your nucleic acid purification needs. Utilizing the proven M-PVA Magnetic Bead technology, the Chemagic 360 delivers high yields of high-purity nucleic acids suitable for a wide range of downstream applications such as NGS, MLPA, genotyping, and PCR. Features at a glance • Optimized design to avoid cross-contamination • Sample volume from 10 μl - 10 ml • Throughput from 96 to 4000 samples per ...
We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...
We sell our Liebherr spare parts stock from our service warehouse here. Enclosed per picture the list of available spare parts. From the screw to the conversion kit. For gas engines. Feel free to take a look and send us your inquiry. Original quality at a special price – stock up on spare parts for your Liebherr gas engines now. Sale under exclusion of any warranty and material defect performance. Shipping: DHL, DHL Express, Freight Forwarder. Request international shipping. Customs fees may apply. English requests are gladly accepted at the international level. In addition, we offer spare parts for various engine manufacturers in the gas engine sector / biogas. The spare parts can be sent to you by express as quickly as possible. This minimizes downtime. Our dedicated sales department with decades of professional experience is at your side with advice and support. Thi ...
; Gross weight [kg]: 1918; Engine: Caterpillar C7.1; Accessories: Tanker, Battery, Control Panel, Stahldach; Water Tank Volume [l]: 349
The CE08 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE08-200 50Hz 200 bar 16 l/min. CE08-200 60Hz 200 bar 16 l/min. General Specifications: ----- Power of the drive motor: 6.0 kW Volts: 400V (50Hz) - 440V (60Hz) Amp: 12.8A (50Hz) - 12.3A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.
Description: COFRAM plate filter 13 plates dimensions 360 x 360 mm Painted steel frame on casters with a stainless steel retention tank Dimensions 610 x 500 H 1250 mm Weight 103 Kg
Canon Image Press V1000 Year:2022 Print Speed (BW/CL):100 ppm Recommended monthly volume: 75,000-600,000 pages Maximum monthly peak volume: Up to 1.2 million pages Registration tolerance: Front to back: 0,70 mm Printing method: Colour Laser Beam Printing Print Resolution (dpi): 2,400 x 2,400 Machine type: A3 Digital colour Press cut-sheet Core functions Reading: 600 dpi x 600 dpi Printing: Up to 1,200 dpi x 1,200 dpi Processor: 1.8GHz, 1.3GHz Dual Control Panel: 10.1 inch Memory: 6GB Hard Disk drive SSD 240GB Mirroring Hard Disk Drive: Yes Interface Connection: NETWORK Standard: 1000Base-T/100Base-TX/10Base-T Power supply: 220-240V/16Ax2(Main Station), 220-240V/16A(Fusing Station) Dimensions main engine (W x D x H): 1,583 x 872 x 1,040 mm Weight: Approx. 410 kg Copy Speed (BW/CL): 100 ppm First-Copy-Out Time (A4) (BW/CL) Weight ...
Used Used Filling Syncrobloc CFT Isobaric 30.30.6 12.000 bph: Year: 2017 Condition: Good SYNCROBLOC FOR LABELING AND BEER BOTTLING IN GLASS Model: CFT S 94 / A Production Capacity: Up to 12,000 bottles/hour Container Types: ? 0.33 L glass bottles (long neck and champagne type) ? 0.75 L glass bottles (champagne type) Supported Caps: ? Crown ?26 mm on 0.33 L long neck bottles ? Crown ?29 mm on 0.33 L champagne-type bottles ? Crown ?29 mm on 0.75 L champagne-type bottles Labeling: ? Self-adhesive front and back labels for 0.33 L long neck bottles ? Wrap-around self-adhesive labels for 0.33 L and 0.75 L champagne-type bottles PE LABELER Maximum Output: ? 12,000 bottles/hour without orientation ? 11,000 bottles/hour with orientation Operation: ? PLC + touch-screen panel for control ? Automatic speed adjustment via inverter and sensors ? Status indicator column light Main Components: ? 4 self- ...
Rheon Cornucopia Type: KN200 Dough pieces: 10-300 gr. Capacity : 10-60 pieces/min digital control Stainless steel cladding rollable on wheels Height: 160cm Width: 80cm Depth: 150cm
BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...
We offer a paternoster LTG-TowerMax P 4.5-250-18-360-4750 with a completely new StoreControl P control system, which has been modernized by us Exterior Dimensions: Overall height 4,750 mm Overall width 3,490 mm Installation depth 1,750 mm 18 carriers with a payload of 250 kg each in clear usable dimensions: H = 360 mm W = 2,820 mm T = 620 mm Chain jump 406.4 mm Total payload up to 4,500 kg 860 mm side table above OKFF with NiRo worktop, 400 mm deep, manually operated lifting door Colour scheme grey/grey Motor power drive 4.0 kW / 400 Volt subject to errors and technical changes, surfaces cleaned, signs of wear and minor deformations possible, Delivery & assembly currently mainly in D, A and other neighboring countries
AGIE CHARMILLES FORM 400 vP die-sinking EDM was built in 2012 in Switzerland by Agie Charmilles SA. The machine is used in the production of, among others, precision dies, punches and tools. Workpieces with a maximum weight of 3000 kg are machined by means of electrical erosion, which enables complex shapes to be made in even the hardest materials. Workpieces machined in this way also do not require other secondary processes to be undertaken, such as polishing. Extensive equipment is included in the offer price, consisting of, among others, an intelligent control system, a measuring probe and a special iQ module that minimises electrode wear. The AGIE CHARMILLES FORM sinker EDM weighs 7014 kg. Technical specifications of the AGIE CHARMILLES FORM 400 vP die-sinking EDM - number of axes: 4 (X,Y,Z,C) - feed in the X/Y/Z axis: 900/700/500 mm - work table dimensions (L x W): 1100 x 900 ...
maximum number of results exceeded
please refine your search
