c combuster used for sale

Complete Line Consisting of 1.Sheet material unwind station (let off stand) 2. Iddon 1320mm x 450mm dia wide 4 roll inverted L calender manual nip adjustment, even speed gears, auto lubrication system with 45kW AC right angle drive motor and gearbox, Steam heated bowls up to 150c Bowl temperature monitoring system, fabricated bedplate. Overhauled in 2007 (by Iddon) with new side frame and rolls precision ground 3. Edge Trim - make: Mario Cotta 4. Guillotine - Make: Pasquato SNC 5. Wind up

Make: CLIMAVENETA Type: WRAT/SL 0802 Power: 200 kW (100KW) Refrigerant: R407C Built: 2006 2 pcs. compressors Make: DWM Copeland Semi-Hermetic Type: D6SJ1-400X-AWM/D One circle is defective, others are OK. Price on request

New galvanized or painted construction supports 3m, 3.50m, 4.00m at great conditions directly from the factory. From.21,50€/ Piece+ VAT Construction support painted 1,60m – 2,90m = 21,50€/piece reinforced version 2,00m - 3,50m = 23,50€/ piece reinforced version 2,30m – 4,00m = 26,50€/ piece reinforced version Construction support galvanized 1,60m - 2,90m = 25,90€/ piece reinforced version 2,00m - 3,50m = 26,90€/ piece reinforced version 2,10m – 4,00m = 29,90€/ piece reinforced version 1 frame for construction supports new, painted 70,00€ New inclined supports, painted 1,70m - 3,00m = 29,50€/ piece Inclined supports new, painted 2.10m - 3.50m. = 35,50€/ Piece Inclined supports new, painted 2,40m - 4,10m. = 38,50€/ Piece New inclined supports, galvanized 1,70m - 3,00m = 38,90€/ piece New inclined supports, galvaniz ...

Important and distinguishing design features of the RaptorX SL steel base gantry machine RaptorX-SL1200/S15 The application range of the RaptorX- SL CNC milling machine is extremely wide due to the adjustable work surface height (variable bridge clearance: 150mm, 300mm or 400mm) plus the travel range of the Z axis of 300mm (at no extra cost). The Z axis stability is excellent, allowing you to work as accurately on large 3D objects as one can on flat sheet materials. Use the system as a plasma cutting system or a water jet cutting system, appropriate accessories are available. It is possible to work on work-pieces up to a height of 850mm (steel cabinets etc.) or three-dimensional objects up to a height of approx. 400mm (with 400m long milling cutter). This capability is unusual for machines of this size and mold makers usually use a layered construction method to produce large ...

CNC portal fraese and 3D engraving machine T-Rex 0712: equipment / product data of cnc-Fraesen Type High-Z/TRex series: Drive: 3 busiest brand stepper motors with 4.5 amperes. Pushing through long and up to 120mm high materials possible, as no belt drive is in the way at the end of the X axis! linear guides on all Y axes from HIWIN / THK ! Multiple ball-bearing ball thread spindles on all axes, brand make! Rapid speed max. approx. 17,000 mm/min working speed max. approx. 12,000 mm/min Technical platform X/Y: 0.005mm (1/10 step); Z: 0.0025mm reverse play maximum approx. +/- 10microns (0.010 mm) Point repeatability: approx. 0.01 mm clamping area of the groove plate / T-slot table: 1650 x 880 mm travel distances: X=1200mm; Y=700mm; Z= 130 mm contact contact sensors / reference switches / limit switches on all axes Double secured emergency release energy chains for cle ...

CNC Router and 3D engraving machine T-Rex 0712: Equipment / product data CNC-milling machine type High-Z/TRex series: Drive: 3 brushless brand stepping engines with 4,5 ampere. Possibility of sliding through long and up to 120mm high materials, no belt drive at the ende of the X axis! Linear guide on all axis by HIWIN / THK ! Multiple ball-bearing ball-screw spindle on all axes, proprietary brand! Rapid traverse max. ca. 17.000 mm/min Operating speed max. ca. 12.000 mm/min Technical definition X/Y : 0,005mm (1/10 Schritt); Z: 0,0025mm Backlash maximal ca. +/- 10µm (0,010 mm) Repeat accuracy: ca. 0,01 mm Clampin surface of grooven panel / T-slot table1650 x 880 mm Travels: X=1200mm; Y=700mm; Z= 130 mm Non-contact reed sensors / reference switches / limit switches on all axes Double secured emergency-stop button Energy chains for a clean cable routing Total dimensions  ...

Chiron FZ18W rotopallet 1999 CNC Siemens 840D X 630 Y 400 Z 425 tables (2) 850x450mm 20 tools ISO 40 / 7100 RPM / 18kW / 140 Nm 40m/min HAWE hydraulics automatic doors swarf conveyor machine can be inspected under power in our warhouse 6 ton 3,6 x 2,25 x 2,85

Why manufacture small parts on large, expensive CNC machining centers when it does a small CNC machine for a fraction of the price as fast and true to size ? Brass, copper , steel, stainless steel and many other materials can be processed . See information and seek non-binding offer or view a demonstration at our premises , personalized with your material and your record !; ready for operation

Manufacturer: Risco Calibration gear type RS 251 for filling machine RS 3005, RS 4003, RS 5005 Ask for offer iNTER-WiBA Sp.J. UL. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 Tel. 0048/33 812 58 60 fax. 0048/33 812 58 36 info@inter-wiba.com.pl abc.inter-wiba.com.pl

Hydraulic stainless steel freezer block cutter (guillotine) with loading for meat/fish/vegetables/cheese. NEW MACHINE IMMEDIATELY AVAILABLE FROM STOCK 2 pieces cutting knife 5 pieces cross cutting knife Cutting room: 460 x 220 x 750 mm Cutting temperature: up to -25° C Cutting capacity: up to 1,600 kg/h Push button control Hydraulic loading Machine dimensions: Width: 90 cm Length: 220 cm Height: 185 cm Weight: 550 kg Connection: 5.0 kW Voltage: 400 V, 50 Hz CE mark: yes

Centrifugal pump, CRI5-2A-CA-I-E-HQQE, 9/14,3m, 5,8m³ Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertical, multistage centrifugal. The pump components in contact with the medium are made of high-quality stainless steel. P: 0,37 KW, H: 9m, Hmax: 14,3m, Q: 5,8m³/h 160 x 220 x 450mm hoch, 17kg, Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation,  ...

Centrifugal pump, CRI10-02 A-CA-I-E-HQQE, 15,3/20m, 10m³/h, Grundfos, new Special price We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition, but not in the original packaging. Vertikale, mehrstufige Kreiselpumpe. Die medienberührten Bauteile der Pumpe sind aus hochwertigem Edelstahl. P: 0,75 KW, H: 15,3m, Hmax: 20m, Q: 10m³/h Functional guarantee! We cannot provide a conventional guarantee and warranty for second-hand parts. However, we give you a functional guarantee. If the unit does not function when it is put into operation, you can return the goods and we will re ...

WASHING INSTALLATION 90° One washer to washing system to clean the containers. The containers are tilted 90 degrees and transported through a washing device. The washing device consists of a housing that contains a spray device which is suitable for cold water with a pressure of 5bar. A conveyor belt to transport the containers. After washing, the containers are tilted back to horizontal position. No recycling water included. The concrete floor must be prepared to drain the water to a certain drain pit. The best option is lower the concrete floor in the area of the washer. OVERHEAD DE/STACKER For the PLC controlled movement, stacking and destacking of empty, containers with a maximum weight of 100 kg an overhead stacker/destacker is installed. The stacker/destacker can PLC controlled take up from:
-a-        The destacking position on the buffer (this is also the  ...

CHIRON MODEL FZ18W MAGNUM 4 axisVertical machining center with rotopallet and double 4th axis20 TOOLSISO 40Toolchange: 2.1 sec Spindle: 20 - 8000 RPM, 18,5k kWX = 625Y = 400Z = 400Rapids 40m/minTable area: 2 x 900 x 470- TSUDAKOMA heavy duty double 4th axis (Japan) 360.000 pos.- original HAWE hydraulic unit - FANUC 0m be inspected under power in our warehouse.Mimu Machine tools Italy

CIAT LGP 120V Product number:M14-4139 Cooling capacity:34,5 kW Refrigerant:R410A Refrigerant Content:3,3 kg Voltage:400 Volt Dimensions:883x798x1201 mm Weight:240 kg Year:2008 Number in stock:1 piece(s) Price:Quotation request Well maintained Ciat water chiller / heat pump with limited running hours. The heating capacity is 40,5 kW at an water outlet of + 45°C. Please visit also our website: used-refrigeration

Cobot collaborative robot Dobot CR10 new - with Safeskin Reach: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, gr ...

Cobot collaborative robot Dobot CR5 new - with Safeskin Reach: 900mm Payload: 5kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effectively Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent interactive panel robot hand guidance The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grind ...

Used 903Kw POWER-CIAT LXH.M 3750 HPS aircooled chiller with integrated hydraulic module. Complete with 3x Bitzer CSH8561-125Y-40P hermetic screw compressor with economizers. Direct expansion shell and tube evaporator with a water capacity of 219 ltr. Aircooled condenser with 12 fans diameter 800 mm and airflow of 264.000 m3/h. Electric control with microprocessor Xtra connect. Capacity control from 17 to 100%. Hydraulic module with buffer tank 950 ltr, expansion vessel 80 ltr and twin centrifugal pump. Specifications: Our inventory stock No. 12831 Brand CIAT Type LXH.M 3750 HPS Product type Air Cooled Chiller Capacity kW 903 Capacity Tons 256,8 Refrigerant Freon Refrigerant Type R 407C Liquid buffer tank Pump Hydronic Module Weight in kg. 8.576 kg Sizes 9400x2500x2200 mm (LxWxH) Compressor(s) type & model 3x Bitzer CSH8561-125Y-40P Display Ciat xtraconnect cont ...

Output: 60 cups/Min. Filling system: volumetric 100-250 g.Optional up to 1000g. Cup size: rectangular 110 mm of diagonally, or 110 mm diameter. Closure: snap on lid or seal sheet. Product: Margarine, lard, salad, etc. Used machine, complete overhauled.

Applications The FCA 3463 automatic double clipper closes all plastic, fibrous, and collagen casings from a caliber of 40 to 120 mm, and is even larger in the case of special applications. This flexibility in the caliber range is achieved by rapid change of the clip sizes from 15 to 18 mm and of the voiding distance from 30 to 36 mm. For the loose filling, free from air, of formed products, an additional overspreading with a total voiding distance of 130 mm is available. Function and operation The FCA 3463 is connected mechanically and electrically to the stuffer. The voiding separator provides portions of precise weight, which are clipped as single sausages or rings. The highest safety standards are guaranteed with the two-handed trigger operation required to start the first clip. The automatic double-clipper is controlled electronically via a PLC and servo-frequency inverter. ...

Rebuilt lathe. Distance between centers: 1000mm. Swing over bed: 725mm. Swing over carriage: 400mm. Motor power: 25-20-15-10hp. Spindle nose: 81mm. CE protections in chuck and carriage and CE european certificate for second hand machines. Equipped with new universal chuck MQD of 315mm. Optional: Steady rest. Optional: DRO Fagor or Heidenhain. Optional: CE back guard.

To check torque on air and electric screwdrivers.

1 X ABB CAT TURBO CHARGER. RECONDITIONED FOR CAT 3516C & 3520C Gas engine CAT PART NO: 254-0789

Complete line for production of twist off metal caps with machines SACMI, Italy. Different sizes and options.

Brand: CFT Model: TE Series Manufacture year: 2002 Production capacity: 15 tn per hour The series has been designed to improve the already superior performance of its predecessors, the MANZINI TE. 15 and TE.30. While preserving the important characteristics of its truncated cone-shaped screen, this new design permits a rapid changeover (without removing the paddles) because the narrow end of the conical screen is at the front of the unit, beneath the cover. The series of turboextractors has a peculiar characteristic: product emulsion due to air trapped within the product. In fact, the infeed of product is located on a completely closed cover and the centrifugal action of the paddles against the conical wall produces an impingement effect in the direction of product flow that helps pomace conveyance towards the expulsion channel. Turboextractors are specifically designed for e ...

Inv. Num. : 6521 Type: Compact A35 Producer: Kovosvit Generated: 2005 Parameters: bar diameter: 35 mm Maximum main spindle power: 7.5 kW Maximum spindle speed: 7000 1/min Number of CNC controlled axes: 8pcs Length: 2250 mm Width: 1480 mm Height: 1890 mm Weight: 3450 kg Equipment: Bar feeder (3 meters) LNS Sprint 555 Part of the sale: Collets Auxiliary head Polished holders VDI25/ER32 Axis tool holder VDI25 Straight and angled power tool holders Equipping the machine with tools (square 16x16 mm) The feeder is equipped with guide channels, pushers and reducing bushes

COMPAIR L11-7.5A screw compressor was built in 2014 in Italy. The compact oil-injected screw compressor with a capacity of 1820 l/min at an operating pressure of 7.5 bar delivers high-quality compressed air at low operating costs. All key operating parameters are continuously monitored by the state-of-the-art DELCOS PRO control, guaranteeing continuous and reliable operation throughout its service life. The screw compressor is additionally equipped with, among others, a refrigeration dryer, an oil separator and a 500 litre KOMNINO KPL-500/L-13 tank. The total weight of the machine is 219 kg. Technical specifications of the COMPAIR L11-7.5A compressor - capacity at maximum working pressure: 1820 l/min (1.82 m3/min) - maximum working pressure: 7.5 bar - suction pressure: 1 bar - motor speed: 3000 rpm - operating hours: 26399 h - operating hours under load: 4346 h - tank capacity: ...

Different length 4000 - 4600 -5200 mm Head Clipper 1200 mm

CLIMAVENETA AWR-MTD2-XE.0031MS Brand:CLIMAVENETA Type:AWR-MTD2-XE.0031MS Stock number:M23-4626 Cooling capacity:9.2 kW Application:Cooling / Heating Number of fans:2 Refrigerant:R410A Refrigerant Content:3,5 kg Voltage:220 Volts Power consumption:5,19 kW Dimensions:900 x 420 x 1240 mm Weight:155 kg Year: New/unused Number in stock:3 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller/heat pump with a scroll compressor, water pump and expansion vessel. This machine is equipped with a separate control unit. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. (Heating: Q= 12,3kW at +40/45°C and +7°C). Visit our website: used-refrigeration

Concept Laser Here we offer you a Concept Laser M2 cusing Multilaser. Concept Laser M2 cusing Multilaser: System technology for safe processing of aluminum and titanium alloys etc. External dimensions: 2542 x 1818 x1987 mm (WxDxH) Weight: 2300 kg 2 lasers 400W Power supply: 3P/N/PE AC 400 V, 32 A 5 bar compressed air required Shielding gas possible through 2 connections for external N2 generators (optional) Build volume 250 x 250 x 280 Layer thickness 20-80μm Production speed 2-20cm³ (depending on material and laser power) Operating conditions 15-35 degrees Celsius Laser service life Laser 1: 501.973 hrs Laser 2: 503.411 hrs Other devices: Lifting device Inox 200 Weight: 102 kg Max lifting capacity 135 kg Protection class IP65 Wet cutter NA 7-11 H CL EU Zone 22 Dimensions: 800x480-570x755-850 mm Drive type: AC Power: 1.25 kw Voltage: 230 V 9.2 A IP65 pro ...

Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced fully painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Engine power of the saw blade 5.5 kW. Adjustable cutting speed via a pneumatic regulator. Maximum system for weight balancing and durability. Shock-absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. Carbide circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system by means of new ball bearings with double dust protection and automatic lubrication system. CE-comp ...

new alternator 0 hours

Posts to Erico Cadweld Welding Metal for the production of welding connections between copper cables e.g. for grounding cables, lightning conductors Special price

Dobot collaborative robot Cobot CR 16 - new Range: 1000mm Payload: 16kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing ...

Dobot collaborative robot Cobot CR12 - new Reach 1200mm Payload 12kg Axes 6 Collaborative robot series CR12 Cobot Improves Product Quality: The DOBOT CR12 series is equipped with interactive programming, convenient and easy to master. Quick to execute Improve the flexibility and production efficiency of your product line by setting up an easy-to-implement collaborative CR robot in 20 minutes and getting it up and running in 1 hour. Easy to make Our software and calculation technology make the operation and management of the CR collaborative robot series smart and easy. It can accurately mimic human actions by demonstrating the path. No coding skills are required. Compatible The CR collaboration robot series is recommended not only because of its comprehensive portfolio of end-of-arm tools, but also because of its universal communication interfaces. With multiple I/O ...

Dobot collaborative robot Cobot CR10 - new Range: 1300mm Payload: 10kg Collaborative robot series Supports payloads of 3 kg, 5 kg, 10 kg and 16 kg Safe working on the side and cost-effective Hand guidance, collision detection and trajectory reproduction Ideal for application scenarios with human-robot collaboration Multiple control methods Low latency and high noise immunity Supports controls on Android, iOS, and Windows High-performance network card with a transfer rate of up to 433 Mbit/s Intelligent Interactive Panel Robot Hand Guide The Intelligent Interactive Panel is embedded with LEDs that indicate the status of the robot With the touch of a button, you can drag and move the robot to teach it a specific path Wide Compatibility Wide compatibility with a wide range of peripherals Suitable for feeding, assembling, testing, handling, screwing, grinding and gluing  ...

automatic chamfering and beveling machine Development and production in England - CNC Mitsubishi control M70 - automatic start of the cycle - automatic switch-off in case of repeatable chamfer lengths - Colour touchscreen control panel - max. spindle speed 3,000 rpm - Rod diameter 8-80 mm - hydraulic 3-jaw chuck - Cutting head suitable for all material sizes - quickly replaceable ISO inserts - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - 4 kW motor - High-precision Mitsubishi servo drive - Ball screw with high thrust capacity - Large machine door - Internal, powerful LED work light - Shavings collection container with external shavings basket - Lifting points for pallet trucks - Weight 500 kg - Dimensions L/W/H 1000x600x1200 mm CE - certified

For sale complete line for plastic caps, include: 1. CCM48 with moulds and CVS 2. cooling system 3. slitting machine Perfect condition. Working at moment. Origin Italy.

Advantages: - Air conditioning efficient and elegant - Ideal conditions for a restful sleep at perfect temperatures - For rooms with a size of 40 - 50 m² - Reduction of potential global warming through environmentally friendly refrigerant R290 - 360° wheels for best mobility The scope of delivery includes: 01x Air conditioner, new Manafacture: AEG Type: ChillFlex Pro AXP35U538CW Product dimensions: 796 x 493 x 420 mm Package dimensions: 885 x 570 x 515 mm Cooling capacity: 3.5 kW EER: 3.1 Energy efficiency cooling: A+ Noise level max.: 64 dB(A) For room size: 40 - 50 m² / 90 - 115 m³ Functions: Cooling / Fan / Dehumidification / Auto Air Flow Volume, Max Cooling: 420 m³/hour Remote control: available with LCD Timer: available Display: LED Display Speeds: Low/Med/High/Auto Dehumidification capacity: 1.6 liters / hour Cooling power consumption: 1.2 kWh / hour ...

Tricool 99 S2/50 chiller 50/S2/1617 stainless combi chiller on mobile skid, also with heating

Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Pallet roller conveyor/ roller conveyor/ pallet conveyor technology Manufacturer: Claus Maschinenbau Condition: Used Drive type: Chain drive Plant consisting of: 12 segments 9x approx. 5.75 meters in length 1x approx. 5.30 meters in length 1x approx. 2.00 meters in length 1x approx. 0.95 meters in length Each element is equipped with its own motor. Total length: approx. 60 meters Total width incl. motor: approx. 1250 mm Total width without motor: approx. 1020 mm Conveying width: approx. 820 mm Roll diameter: approx. 80 mm Axes/roller spacing: approx. 80 mm Frame width: approx. 85 mm Frame height: approx. 185 mm Colour: blue Pallet guide included Including SEW motors 1.1 KW Includes feet - height adjustable Price per meter  ...

WK 700 Z classic Tilting circular saws Tilting saws/firewood saw PTO Performance: Tractor approximately 12KW - 16 HP Speed: 1450 RPM with the carbide saw blade 700 / 30 mm with longitudinal stop Depth of cut: D = ca. 250 mm with drive systems Weight: ca. 120 kg G & BGU-90157 Accessories: G & BGU-91272 wood retaining claw G & BGU-95060 PTO PTO standard 102

Bar max: 8 m3/h: 211 KW: 22 V / P / Hz: 400 / 3 / 50 min - 1: 3000 Kg: 465

Carbolite CWF 11/5 Chamber Furnace 1100 °C Max Temp: 1100 °C With suction device and table The upward-opening door keeps the hot surface away from the user Gently self-closing door (for 5, 13, 21 & 23 litre models) Standard start-up delay and process timer function Durable alumina backing plates for the heating elements; Robust door frame and base plate High-quality fiber insulation with low thermal mass Powerful heating elements on both sides ensure very good temperature homogeneity Easy access to elements and controls simplify maintenance and servicing More items new and used - you can find them in our shop! International shipping costs on request!

Qty 1 x Farrel Bridge 4 roll inverted L Lab calender, Roll width: 381 mm roll Ø: 152 mm Roller bearings Speed: 2,38 – 23,8   1/min., adjustable Nip adjustment: by hand Friction: 1:1 / 1:1,21 Drive: 9,25 kW, 380 V Measurement: ca. 1.765 x 1.687 x 1.800 mm (L x W x H) Weight: ca. 1.800 kg in. control cabinet

We offer as follows: 2 pieces Jenbacher CHP type JMS 316 GS-C21 Generator: inchAVKinch 1110 kVA Technical data: Engine power approx. 1922kW electrical power: approx. 736kW electrical efficiency approx. 38.3% Thermal power: approx. 912 kW Thermal efficiency: approx. 46.9% Built: 2000 The plants sing needed. The sale is subject to any warranty.

Screw air compressor Atlas Copco GA 408 59.586 hours of operation Masch. No. ARP 230-128 Built in 1994 Weight 1.2 to L x W x h: 250 x 130 x 200 cm Fqe3oovyi 8 bar 30 kW 2925 / min 380 V 50 Hz This machine is been serviced annually by Atlas Copco. The machine is in good condition, ready to use. Subject to changes, errors, prior sale! Service/spare parts by MATEC CH-4900 Langenthal/DE-79618 Rheinfelden MATEC system + technik GmbH Mechanical engineering Eisenbahnstrasse 25 CH-4900 Langenthal/Switzerland Tel. 0041 62 966 18 32 Fax 0041 62 966 21 12

Speed controller, 4.3 A, 1.5 kW, 230/277 V AC, AS-Interface®, S-7.4 for 31 Participant, with braking resistor Integrated thermistor monitoring PTC and Thermo-Click with safe separation 2 sensor inputs via M12 sockets (max. 150 mA) for quick stop and Locked manual operation optional: 4 sensor inputs with M12-Y adapter for switching to Creep speed Connection of the supply voltage via adapter cable to round or Flat cable outlet Diagnostics and reset on the device and via AS-Interface with key switch AUTO - OFF/RESET - HAND 3 fixed speeds and 1 potentiometer speed Switchable from U/f to speed control (vector) with selector switch REV - OFF - FWD

Giusti, cooking vessel, steam jacketed vessel, 225L, central bottom discharge, stainless lid

CITIZEN CINCOM A20 VIPL CNC lathe built in 2006 ensures the highest precision and efficiency in the production process. During machining, the specially designed bed with its rigid structure and high thermal stability effectively reduces the heat impact, resulting in increased machine life and reliability. All of this, combined with a modular design with a reduced number of parts, makes the CINCOM A20 VIPL CNC lathe ideal for various types of production. Workpieces with a maximum diameter of 20 mm and a length of 135 mm are machined in 7 axes by a powerful main spindle which is synchronised with an AC motor, forming an electrospindle. A bushing driven by a separate AC motor is also synchronised with the machine’s main spindle. The operator’s panel consists of an intuitive FANUC 32i CNC controller, a memory card slot and an electronic wheel located next to the monitor designed to ch ...