c combuster used for sale

Automatic controlled guillotine cross knife Consistent high throughput Chamber length: 620 mm Chamber cross section: 120 x 120 mm

General: Year of construction 2006 Management Heidenhain plus IT Travel X 150 mm Z 650 mm Y 80 mm Program duration 10,600 h Spindle: Spindle speed 5,000 rpm Spindle bore 65 mm Turning diameter over face slide 375 mm Turning length 635 mm Revolver: Tool holder VDI30 Number of stations 12-fold with AGW Dimensions and weight: Dimensions 5,000 mm x 2,500 mm x 2,800 mm Weight approx. 5,800 kg

CONVEX® Combi-Tower - by UBERT - Made in Germany Two-in-One - The Advantages Combined arrangement for the smallest footprint. This also avoids long distances between sales rooms. Convex double glass doors for perfect product presentation, minimal heat loss and extremely low touch temperatures Intuitive user guidance thanks to plain text display Software update via USB interface Shorter cooking times of less than an hour for grilled chickens with a gross weight of 1kg each Programmable climate control in the cooking chamber for a perfect grilling result The new CONVEX® rotisserie Equipped with 3 heating systems in one device: Infrared for optimal tanning Convection for fast and even cooking Steam for juicier products CONVEX® dampers For the operating modes steam, combination, hot air, regeneration 8 levels (longitudinal insertion) for 1/1 GN ...

Inv. Num. : 7661 Type: 605 CNC Producer: Witech Created: 2005 Parameters: Control system: NUM 1040 Work table length: 220 mm Work table width: 210 mm X-axis travel: 330 mm Y-axis travel: 150 mm Z-axis travel: 150 mm Machine height: 2300 mm Machine length: 1650 mm Machine width: 1730 mm Machine weight: 750 kg Equipment: 4 Tool Holders Pump Spindle temperature device Heidenhain Linear Measurement

32 mm-5 axis Swiss Cnc lathe with moving bushing - Iemca Boss 332E barfeed new in 2008 - Syntec Control

Inv. Num. : 7681 Type: SABRE 1000 Producer: Cincinnati Milacron Generated: Parameters: Control system: HEIDENHAIN TNC 426CB X-axis travel: 1016 mm Y-axis travel: 508 mm Travel Z-axis: 558 mm

Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter -inch thread: 3/8 - 1 inch -In the transport case -Weight: 5 kg

centrifugal pump, water pump -Flow rate: 15 m³/h -Pumping height: 11 m -Motor power: 1.1 kW -Speed: 1420 rpm -Number: 2 pumps available Price: per piece -Dimensions: 380/270/H480 mm -Weight: 44 kg/piece

Granulator for heavy duty Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator blades Drive motor 75 kw

Used chocolate mass melter by Spomasz Pleszew type CUA19. New 1996. Two-chamber melter, unused, jacket and heating grate, dimensions of one chamber 105 cm x 200 cm, electric heating system. Weight 1610 kg.

feed pressure: 10 bar Effective free air delivery: 252 L/min Receiver capacity: 90 l / bar Number of cylinders: 1 Stk. motor: 400Volt / 1,5KW V / KW turning speeds: 777 U/min weight of the machine ca.: 70 kg. range L-W-H: 0,97 x 0,5 x 0,9 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Immediately available in the recon

Ready to ship recon camshaft

Immediately available completely overhauled shop air coolers

Immediately available used lubricating oil coolers

Immediately available used gear camshaft

Immediately available used exhaust gas compensator

Immediately available overhauled gas-oil flow covers, also used ones we have all in stock

Used crankshaft immediately available

Immediately available new

Can filler, manufacturer Framax Italy, year of construction 2018, 6 head rinser, 6 filling valves, 1 seamer head, standard can 211/202, capacity approx. 1,200 cans / hour, set up to 0.33 / 33cl / 330ml + 0.44 / 44cl 440ml Can filler, Made Framax Italy, Year 2018, 6 nozzle rinser, 6 filing valves, 1 head can seamer, standard can 211/202, Capacity aprox. 1.200 cph, adjusted to 0,33 / 33cl / 330ml + 0,44 / 44cl 440ml

Oil/water separator, oil-water separation system -Dimensions: 660/260/H700 mm -Weight: 18 kg

SPECIFICATIONS: Sanding belt size: 1380 x 2620 mm Max. working height: 160 mm Diameter of the rollers: 250 mm 3 independent motors total KW 36.0 Electronic Band Oscillation Front and rear support rollers Speed variator Pneumatic Shoes Hardness of the rubber rollers Reel I: 90 sh Reel II: 75 sh III Reel: 55 sh

Cylinder Head Overhauled PHASE I and PHASE II Also used immediately available

Key data: 30 m³/min, 7

Type: ZT 30 Year of Make: 2000 Power (kW): 30 Pressure (bar): 7.5 100% oil-free compressed air; Reduced energy costs; Applicable in: Pharmaceutical industry food and beverage industry; Electronics industry; Medical & Healthcare

Has been used for cooling hot pouches of sauce in a large sauce factory. Could possibly be used as a large blancher.

Frequency converter, frequency transformer, drive converter, controller, variable speed drive -Power: 7.5 kW -Input: 380/415 V 50/60 Hz -Output: 11.0KVA 380/415V 16.5A max. 7.5kW max. 50/60Hz -Dimensions: 290/520/H220 mm -Weight: 10 kg

Key data: 50

Atlas Copco GA50VSD Screw air compressor in good condition.

Atlas copco GA50vsd screw air compressor good as new.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 28 cooling units are available. All 28 cooling units fit into a 40Hc container for transport.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

Container cooling units (container cooling systems) available in good condition. They have the following specifications: Temperature range: -25 C° - Weight: 600kg (due to aluminum, steel and copper) Refrigerant: R-134a -Year of manufacture: 2008 The price indicated is per unit without container. A total of 17 cooling units are available. All 17 cooling units fit into a 40Hc container for transport.

Cylindrical roller bearings -Type: 30313 Price: per piece Quantity: 3 available -Weight: 2.4 kg

Centrifugal pump, high-pressure pump, water pump, multi-stage vertical centrifugal pump -Drive: 0.37 kW 2900 rpm -Max. flow rate: 2.0 m³/h -max. H: 14.8 m -Dimensions: 200/210/H420 mm -Weight: 15 kg

UD 24 CNC YOC 1990 Condition: well-maintained Year of Make: 1990 Control: Bosch CC200 Max. turning diameter with jaw chuck: Ø110 mm Max. turning length: 180 mm Bar passage: Ø24 mm Main spindle: 5,000 rpm / 5kW Tool turret: 8-cavity VDI20 W/D/H: 1,830 x 1,435 x 1,625 mm Weight: 1,600 kg Bar feeder: Ø24 x 3,000 mm Bar feeder W/D/H: 4,800 x 900 x 1,300 mm Equipment: - Collet + jaw chuck -Tailstock - IRCO Bar Feeder - Parts catcher - Optics for tool measurement - 8 pieces of VDI mounts

Key data: 500 mm, 420 mm, 400 mm

Machine Details Stock-No. 1105-04021 Type of machine Machining Center - Universal Make LID MAHO DMG Type CMX 50 U 5-axis Year of manufacture 2020 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details X-Travel 500 mm Y-Travel 420 mm Z-Travel 380 mm control HEIDENHAIN TNC 620 tool adaptor SK 40 turning speeds 12000 1/min table surface area 500 X 380 MM mm tool change unit 30 pos. total power requirement 40 KVA 63 A Absich Additional information CONTROL HEIDENHAIN ITNC 620 NC round-swivelling table, coolant device,TOOLS PROBE PARTS PROBE COOULANT TROUGHT THE SPINDLE Cabin

Computer, on-board computer, organizer -Type: Organizer 2 Compilot 400 -Number: 2 organizers available Price: per piece -Weight: 0.8 kg

Probst & Class/ K 180 EL GLEN-GK/ 2017/18 Colloidal mill 2 available, price per piece For vegetable for example carrots used, sold as it is, where it is, price ex location

snow chains -the automatic snow chain - fascinatingly simple and fast -1: Pair Price: complete -Weight: 10 kg

for sale GIS Piston Compressor GS25/150/400/T Boiler capacity 150 litres Suction capacity 400 min./l Motor 3 HP, 400 V mobile Total weight approx. 80 kg Other models available, inquiry to FSA Maschinen AG

We sell a Carrier chiller 30 GH 100 0171 AEE, built in 1997

Pinion Shaft for Poly Clip FCA 160 - NEW Product number 315593 / 193118 Request a quote iNTER-WiBA Sp.J. Ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Inv. Num. : 7736 Type: CL2000B Producer: MORI SEIKI Created: 2008 Parameters: Control system: Mitsubishi MAPPS III Switch-on hours: 37200 h Maximum turning length: 560 mm Max. turning diameter: 350 mm

Opem Colibri 4 S bagging machine - Used for Senseo pads - Perfect working condition - Free immediately -

Key data: 10000 , 3950 , 2500

Used for machining large parts as well as many small workpieces. machine was modernized in 2021 Type of CNC FANUC control rack X axis 10000 mm Y axis 3950 mm Z axis 2500 mm Table length 8000 mm Table width 2800 mm Max load on table 60000 kg Max. spindle speed 2000 rpm ------------------- Length x width x height 171000.0 × 93300.0 × 67600.0 Weight 150000 kg The machine, equipped with a stable work table and indestructible components, allows tasks such as milling, drilling and tapping to be performed with the highest precision, guaranteeing maximum process optimization in a wide range of industries.

Cube Slicer/Dicer Emens MDL 60 for bacon/ham cubes, approx 8x8mm 1500-2000 kg/hr.

Fessmann t 1900 Compact, electrically heated

Cycle-controlled lathe Dimensions: 4000 x 2300 x 1800 mm Weight: 4800.00 kg Description: Cycle-controlled lathe with large hollow spindle and high speed, with FAGOR 8055 TC CNC control. Specifications: Turning diameter over bed: 580 mm Turning diameter in the offset: 800 mm Offset length from spindle nose: 280 mm Turning diameter over support 305 mm Center height 290 mm Hollow spindle diameter usable: 80 mm Female thread at spindle end: M85xP1.5 Center width 2200 mm Spindle Spindle speeds: infinitely variable in 2 stages, automatic switching! Level 1: 80 - 750 rpm Level 2: 750 - 2400 rpm Spindle nose: DIN 55026 - A 1/ 8 Recommended chuck size: 250 mm diameter Largest workpiece weight (with steady rest): 2000 kg Feed spindle bearing: 120mm iD/OD Rear spindle bearing: 110mm iD/OD Spindle motor power S1 (100%) / S2 (40%):  ...