128,649 used machines on RESALE, but how to find them? Machine Search
From business abandonment: We are selling a CNC portal milling machine with a working area of 3200 x 1510 x 300 mm It is used, but is well maintained and runs well. It was used to mill sheet material. Very good e.g. for wood, façade panels or Eternit cuts. It has 3 axes with rack and pinion drive Spindle: Air Cooled HF Spindle ES915 3.8KW S1 4.6KW S6 60% Ceramic/Steel Bearing With ISO30 collets (we supply with) ATC from HSD with Automatic Tool Changer (Air Driven) TOP: A complete replacement spindle is also included, freshly serviced with new bearings! The controller is an eding control on Windows PC, PC is included. A conversion of the Y-axis to 2 x12 Nm closed-loop stepper motor with very precise German Wittenstein gearboxes took place 5 years ago. X-axis runs with 9 NM stepper motor, Z axis too, also has a brake built in to hold the axle. Important and outsta ...
Bosch Cartonetta 75 horizontal cartoning machine, bucket infeed, carton size range min. 15 x 15 x 54 mm (LxWxH), max. 92 x 66 x 180 mm (LxWxH), output up to 75 cartons per minute, leaflet folder from stack, reverse tuck closure of the carton flaps, Laetus Argus 6012 bar code reader for folding carton (opposite insertion side), leaflet (both sides) and presence of leaflet inside the carton, emboss coder (2 lines), electrical connection 400V/50Hz, power 4 kW, compressed air 6 bar, machine footprint approx. 2900 x 1300 mm (LxW), machine height approx. 1600 mm, machine net weight approx. 800 kg, retrofitted in 2009 by the company HVS including new Siemens SIMATIC S7-300 machine control system + SIMATIC panel
grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
RECON -Part Number: 1605919 - Diesel ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!
Didar Part Number 0697210002 NSN 12-334-9607 Original Part Number 0020984020 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 17 Lt. Amount of Air Outside the Pipe 63 Lt.
Didar Part Number 2601582001 NSN 12-SG3-0291 Original Part Number X00018011/87 In-Pipe Water Pressure 3 – 8 bar Out of Pipe Air Pressure 3 – 5 bar In-Pipe Water Temperatur 75 °C Outside Pipe Air Temperature 235 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 22 Lt.
Didar Part Number 2605710003 NSN 12-A08-6397 Original Part Number 0030983220 In-Pipe Water Pressure 3.5 – 8.5 bar Out of Pipe Air Pressure 3.5 – 4 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 215 °C Amount of Water in the Pipe 24 Lt. Amount of Air Outside the Pipe 45 Lt.
used
for sale chocolate tanks Capacity 1000 liters and 2000 liters. Heating jacket Stirrer for thick chocolate mass I send photos at the client's request
Didar Part Number2600208001 NSN 2930-12-A01-6407 Original Part Number 0030983920 In-Pipe Water Pressure 6.0 – 9 bar Out of Pipe Air Pressure 3.3 – 5 bar In-Pipe Water Temperature 95 °C Outside Pipe Air Temperature 225 °C Amount of Water in the Pipe 4 Lt. Amount of Air Outside the Pipe 14 Lt.
Frequency converter F4, 45KW, 21.F4.COR-3420/2 2, KEB, used Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. Used! - comes from a spare parts warehouse of a certified production facility, - is in very good condition and fully functional, - The device has been tested and shows no faults. Technical data: - Frequency converter F4, 45KW, 21.F4.COR-3420/2 2, KEB, used - Input: 3x 305-400V 100A, 460-500V 85A, - Output: 0 - 1600Hz, 0-440V/90A, 480V77A, - Power 62KVA, 45 KW - incl. control unit Ensuring the function: In order to ensure the functionality of the goods, the buyer must check the goods at the time of acceptance or put them into operation. In case of any defect, which is not the fault of the buyer, the goods can be returned within 2 weeks. ...
Didar Part Number 2605710001 NSN 12-A01-7491 Original Part Number 0010989720 - 0000985320 In-Pipe Water Pressure 4.5 – 8 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 7 Lt. Amount of Air Outside the Pipe 25 Lt.
Didar Part Number 260057620 Original Part Number 362161 – 472046 In-Pipe Water Pressure 4 – 7 bar Out of Pipe Air Pressure 2 – 6 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 230 °C Amount of Water in the Pipe 58 Lt. Amount of Air Outside the Pipe 120 Lt.
Didar Part Number 0697210001 NSN 12-334-8788 Original Part Number 0020984220 In-Pipe Water Pressure 3 – 4.5 bar Out of Pipe Air Pressure 4.5 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 200 °C Amount of Water in the Pipe 10 Lt. Amount of Air Outside the Pipe 44 Lt.
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
Didar Part Number 0688910002 NSN 12-F12-5835 Original Part Number 0010981320 In-Pipe Water Pressure 4 – 6 bar Out of Pipe Air Pressure 4 – 7 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature1 80 °C Amount of D153928 Water in the Pipe 8 Lt. Amount of Air Outside the Pipe 28 Lt.
Didar Part Number 2600134944 NSN 12-163-2290 Original Part Number 5900980220 In-Pipe Water Pressure 3.5 – 7 bar Out of Pipe Air Pressure 2.6 – 4 bar In-Pipe Water Temperature 90 °C Outside Pipe Air Temperature 220 °C Amount of Water in the Pipe 12 Lt. Amount of Air Outside the Pipe 38 Lt.
Teledyne Isco CombiFlash Companion/TS The CombiFlash Companion personal flash chromatography system can be controlled and monitored from anywhere with any connection and Microsoft Windows® Explorer. It even notifies you via email once the separation is complete. The system's advanced automation and communication features give you the highest levels of productivity and peace of mind. This allows you to devote yourself to other tasks undisturbed while the cleanup is in progress. The touchscreen controller allows you to control the system locally on a clear screen. The optional solvent management module controls up to four solvents online and monitors their levels, so you're never left without solvents. Companion uses precision-packed RediSep® RF columns to extract more virgin material in less time than glass columns or other disposable columns. Columns from 4 g to 330 g can be ...
For sale is a BOXMAKER® cardboard machine from Horstmann Maschinenbau for the flexible production of tailor-made shipping boxes – exactly in the required size and quantity. Your advantages at a glance: • Producing cartons "just in time" – individually controllable via touch panel • Reduction of storage costs and filling material • Reduction of shipping costs through custom-fit packaging • Less transport damage, higher customer satisfaction • Processing of continuous cardboard or sheets, complex cuts possible Ideal for industry, wholesale, fulfillment and e-commerce that want to make packaging processes more economical, sustainable and independent.
Belt conveyor / conveyor belt / belt approx. 15.23 meters Manufacturer: Costo Year of Make: 2009 Model: Belt Condition: Used Total length incl. feed belt: approx. 15230 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 790 mm Belt width: approx. 700 mm Strap Type: Longitudinal Grooves Steel frame Frame height: approx. 105 mm Colour: Dark grey Plant consists of 8 segments 6 segments: approx. 2000 mm 1 segment: approx. 2130 mm 1 segment: approx. 1100 mm (feed belt) Internal Article Number: 2026022102 SEW motor included Feet To be ordered separately The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even und ...
Belt conveyor / conveyor belt / belt 18000x870 approx. 18 meters Manufacturer: Costo Year of construction: 2009 Model: Belt Condition: Used Total length: approx. 18000 mm Total width incl. motor: approx. 870 mm Total width without motor: approx. 790 mm Belt width: approx. 700 mm Strap Type: Smooth Steel frame Frame height: approx. 105 mm Colour: Dark grey Plant consists of 8 segments 7 segments: approx. 2250 mm 1 segments: approx. 2330 mm Feet to be ordered separately SEW motor included Internal Article Number: 2026022103 The conveyor technology ran until dismantling. Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralo ...
Cologne S Smoking Shelter 2165 x 2500 x 2165 mm Whether on company premises, in public places or in private areas - the Cologne S smoking shelter with access on the right is a reliable choice for a practical and versatile shelter with timeless elegance in the outdoor area. The Cologne S smoking shelter offers an ideal solution for reliable protection with maximum stability. The stable frame construction made of hot-dip galvanized and powder-coated square steel tube guarantees durability and durability. The steel parts are primed and paint-coated (protection class: C4 medium). High-quality wall elements made of toughened safety glass shield against wind and rain. The canopy is designed in such a way that it can easily withstand even very high wind loads and snow loads (wind load zone I-III/snow load 1.9 kN/m²). Whether as a smoking shelter or as a bus shelter - this canop ...
Central processor unit CPU, also with model number: 170174 recognizable, price ex stock
Fessmann smokehouse with capacity for one trolley, designed for professional meat processing and smoking applications. It features electric heating with a power of 17 kW and an integrated smoke generator mounted in the smokehouse door, ensuring even smoke distribution and stable processing conditions. Its compact construction and practical dimensions make it suitable for butcher shops, meat processing facilities, and small production plants. 1 trolley Heating: electric, 17kW Installation dimensions: Base width:112 cm Base depth: 110 cm Height total: 235cm Corpus height (without el.motor height and pipes): 187cm Smoke-generator – built in door
Roller conveyor / pulley conveyor curve 90 degrees Manufacturer: Costo Year of Make: 2009 Condition: Used Model: 90 Degree Curve Total width outside: approx. 2250 mm Total width inside: approx. 1140 mm Total width: approx. 800 mm Conveyor width: approx. 740 mm Total height including side guide: approx. 220 mm Material: Steel Frame height: approx. 120 mm Stock: 2 pieces Price per piece Condition: fully functional, with signs of wear Feet to be ordered separately Material: Steel Ideal for fast material transport Expertly dismantled and packed Internal Article Number: 2026031202 The conveyor technology ran until dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics We are your competent partner for roller conveyors, ...
Year of manufacture: 2013 CNC Controller: FAGOR 8055TCO Capacity Distance between centers (mm): 3000 Height between centers (mm): 300 Height between centers from the ground (mm): 1200 Grinding diameter (mm): ø 595 Max. workpiece weight between centers (kg): 2000 Max. Workpiece weight with tool (kg): 200 Table (Z-axis) Maximum travel (mm): 3350 Rotating table plate ±5° Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Grinding carriage (X-axis) Maximum travel (mm): 500 Feed rate (mm/min): 0.01 ÷ 6000 Minimum programmable increment (mm): 0.001° Resolution (mm): 0.0005° Grinding head Left grinding wheel diameter (mm): 600 Peripheral speed (m/s): 45 Workpiece head Spindle speed (rpm): 9 ÷ 250 CM taper: 5 Spindle type: 8" Tailstock Type: Manual handwheel Spindle taper (cm): 6 Maximum spindle travel (mm): 60 Quill diameter (mm): ...
GERBER Cutter Z7 automatic cutting machine was built in 2016 in China by Gerber Technology (Lectra). The machine is used in the production of clothing and all sewing products. It can cut both single and multi-layered fabrics with a maximum thickness of 7.2 cm (after compression). Cutting is performed by means of a robust, vertical oscillating knife, which ensures the highest cutting precision and shape repeatability regardless of the type of material. The advanced Knife Intelligence Plus” system controls the movement of the knife, changing its angle, cutting path and acceleration in real time to ensure precise cutting of repeatable parts for all layers every time. Cutting paths are additionally optimised by the SMARTbite system, which automatically adjusts the knife advance speed based on the height and type of overlap. The oscillating knife is continuously sharpened during cutting, ...
Slab Caster Main Data • Manufacturer: Concast-Sumitomo • Number of Strands: 1 • Machine Radius: 8m • Number of Segments: 7 • Mould Size: 760 -1060mm (not adjustable when casting) • Slab Thickness: 160mm • Oscillator: Mechanical • Straightening: Multipoint • Cooling: Single Zone • Casting Speed: 1.7 m/min • Capacity: 650 kt/y • Tundish Weighing: Yes • Tundish Equipment: Stopper Rod, Submerged Entry Nozzle • Dummy Bar: Bottom Entry, Linkage Design • Slab Discharge: Propane Gas Torch Cutting • Breakout Detection: Yes. • Commissioned in 1992. • It has been mothballed since 2013.
Machine Details Stock-No. 1105-03574 Type of machine Machining Center - Vertical Make CHIRON Type FZ12 WM Year of manufacture 1995 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EXW -free on truck Technical details x-travel 550 mm y-travel 300 mm z-travel 425 mm tool taper SK 40 control Siemens 810 total power requirement 12 KVA weight of the machine approx. 4.0 t transport dimensions LxWxH 2,05x3,05x3,0 m Additional information chiron fz 12 wm with changeable plate with 2 x 4. axis PEISELER WIth CONTROL SIEMENS 810 TOOLS SK 40
Year of Make: 2014 Machine Number: API730798 Hours: 504 New compressor at 504 hours New operating hours display April 2025 Make: Atlas Copco Made in Belgium Oil-free scroll compressor Compaction: Spiral compactor Cooling: Air-cooled design Drive: Efficient motor with belt drive Control: fixed speed Control: Simple start/stop control Refrigeration Dryer: Integrated, Refrigerant R513A Electric condensate drain included Performance data Volume flow at operating pressure 6.75 bar 0.4 m³/min Operating pressure min. / max. 4.0 / 7.75 bar Total power consumption at 6.75 bar / full load 4.4 kW Nominal power motor 3.7 kW Engine rotation 2885 rpm Pressure dew point refrigerant dryer ( 20°C 100% RH) +3 °C Installation data Ambient conditions min. / max. 0 / 40 °C ∆ T above cooling medium temperature 0 °C Cooling air requirement 900 m³/h Free fan pressur ...
CORMAK CK7150LT12x1000 CNC lathe was built in 2025. The machine has only undergone a test run and has never been in operation, it is like brand new. CORMAK CK7 is an extremely versatile machine designed for precision machining of parts made of non-ferrous metals, ferrous metals and non-metals. It is capable of performing operations such as turning of cylindrical, conical and end faces, as well as boring, grooving and threading. Workpieces with a maximum diameter of 500 mm are machined by means of driven tools and a spindle rotating at a maximum speed of 3000 rpm. The machine’s compact design ensures a high degree of stability during even the most intensive challenges, as well as facilitating daily operation and maintenance. All this makes the offered CORMAK CK7150 LT12 CNC lathe the best choice for companies specialising in the machine tool or automotive industry. The total weight o ...
Code: 0340 Brand: CIMAN - ITALY Model: MATA 450 - CE Standard Automatic single-head crosscutting machine with double-angle for aluminium, complete with roller conveyors on the right and left – CE Standard Technical data: Blade diameter 450 mm Hole 32 Motor 3 Hp – Rpm 2800 Cutting dimensions : at 90° mm 90 x 190 mm - at 45° mm 90 x 125 Profile clamping, blade lubrication and feed are pneumatic Double rotation of the heads +/- 22,5°-45°-90° achieved by means of a pneumatic cylinder The cutting feed is adjustable by means of oil brake Complete with base and 2 side tables 3 metres on the left and 4 metres on the right with adjustable stop It is also equipped with a special protractor for cutting at intermediate angles Suction inlet diameter 100 mm Compressed air 6–7 bar Overall dimensions: Machine mm 1200 x 1500 x 1500 h - Left roller conveyor mm 3000 x 200 - ...
CPU-1 1240-4589 in good condition 12404589 AVAT MWM DEUTZ TCG 2020 MWM TCG 2020 V-12 V-16 V-20
Bitzer CO2 composite system type TPS4-2FHC-3K with 4 compressors type 2FHC-3K for TK
Protective cover for framing curly parts on the ring etc. This protective device is often recommended by the BG. Maximum fraeser diameter 160mm With start-up ring, brushes and brake wedge for the start-up bearing Obviously hasn't been used much before. The machine can be demonstrated by appointment with us on site. We only offer machines that are ready for preparation in our warehouse, see "further offers from this supplier".
General: Year of construction 2003 Switch-on hours 33,321 h Working hours 10,144 h Control Siemens 840D ShopTurn Travel X 400 mm Z 400 mm Rapid traverse 12 mm/min Spindle: Spindle speed 8,000 rpm Rod passage 32 mm Turning diameter 120 mm Revolver: Number of stations 16-fold Number of driven tools 8 Tool holder VDI16 Dimensions and weight: Dimensions 2.500 x 1.400 x 1.700 mm Weight approx. 2,300 kg Other equipment and included accessories: Tailstock programmable Electronic handwheel Oil mist extraction Preparation for bar loaders
Due to production change, we are selling our still very young Fessmann Smoke/Cooking System T3000, oil-fired Bj 2022 Height 100cm Car size 198x104x102 Control: FoodCon.2 Touch 12" Incl. cooling coil and cooling machine 3.3kw autom. pneumatic door opener Voltage: 400V Front door hinge on the left Smoke Introduction: Top Complete system package: incl. matching grater smoke generator: RR325 M suitable for beech/oak/spruce wood incl. matching refrigeration dryer Beko model DPRA50 incl. matching refrigeration machine / outdoor installation 3.3kw
Type: Clipper Tipper Tie Made completely of stainless steel and robust industrial plastics Easy to clean due to smooth surfaces Inclined surfaces to improve drainage of water S-clip on reels S-Clip: S 625, S 628, S 632, S 638 Dimension of the machine: Width: 100 cm Depth: 78 cm Height: 180 cm Power input: 0.1kW Fuse Connection: 2.5A Compressed air: 4-6 / 0,4-0,6 MPa Delivery time: 1 working day after payment
Cooling capacity: 315 kW (12/7 — 35°C) Heating capacity: 350 kW (40/45 — 7°C) Year of manufacture: 2017 Options: Heat pump Heat exchanger: Plate Refrigerant circuit: 2 pcs. Compressors: 4 pcs. Danfoss (scroll) Type of refrigerant: R410A Working hours: 4692-7121 h Dimensions: 5.60 x 1.85 x 2.15 m Weight: 3230 kg Condition: Excellent Product quantity: 2 pcs.
Machine Details Warehouse number 1105-03634 Machine type lathe - cycle controlled Make CAZENEUVE Type OPTICA 360 Year of construction 2000 Control type CNC Control CNC NUM Storage location FRANCE HAGUENAU Country of origin France Delivery time immediately Freight base EX WAREHOUSE Technical details Turning diameter 380 mm Turning length 750 mm Control CNC NUM Turning diameter above the face sled 200 mm Turning diameter via transverse guide 280 mm Main drive motor 11 kW Spindle speeds 2 - 3000 rpm Spindle passage 54 mm Chuck diameter 160 mm Tailstock cone MK 4 Total power requirement 14 kW Machine weight approx. 2 t Information TAECH IN CNC MACHINE CAZENEUVE OPTICA 360 FROM 2000 3 BAKING FEED TAILSTOCK
SCM C30 4-fold combination machine Format Circular Saw Dressing Thickness Planer Machine Milling Machine Planing width 300mm Planing shaft: 3-tersa knife shaft Dressing table length: 1200mm Passage height: 3-200mm Format sliding table: 1070mm Besaeumlaenge Cutting height: 80mm Saw 90°-45° swivel Engine power: 400V 2 hp S1 Milling machine rigid 90° Milling machine rpm: Speeds of 4200-6300 rpm or 5000-7500 rpm G&STÜ-5500030 relkag21 SPECIAL PRICE: Fits in any small workshop!
-Granulator with sound insulation -Working width: 600 mm -Rotor diameter: 400 mm
Printing plate die-cutter for Roland 300 presses with CPL system. Tested, all punching modules without defect. Stock goods, can be shipped immediately.
Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request
Compact electric press brake C9 CoastOne - Made in Finland Pressing force: 22T Bending length: 900mm Spindles: 1x22T Control: TC15-2D graphics Backgauge: 2 axis controlled X-R axles Lazersafe photoelectric sensor: 100mm/s delivery speed Bending tool holder: Type A / R1 / AMADA / Promecam Quick release system TEDA Speed Grip 4x Adapter Front support tables Front light 1x set of bending tools incl. 36 months warranty after installation Delivery excl.; at call Viewing under electricity possible at any time by appointment!
with 8,000 m³/h air volume. 11 KW fan 32 filter units Filter area 144 m2 Diameter of the filters 145 mm Deprivation via briquetting press with a nominal throughput of 100 kg/h Material-dependent
with 6,000 m³/h air volume. Standard emptying in 3 containers. Reliable, quiet and easy to use. CLEAN AIR BLOWER 7.5 KW Filter area 30 m2 Footprint 350 x 110 x h 244 cm
maximum number of results exceeded
please refine your search
