bx 24 used for sale

Technical data: - Cutting range at 90° around 260 mm - flat 260 x 260 mm - Material replenishment machine max. single stroke 600 mm - Max. section length in multi-stroke mm - Saw blade dimensions approx. 4100 x 32 x 1.2 mm - Cutting speed infinitely variable 12 - 100 m/min - Cutting pressure infinitely adjustable 0 - 10 m/min - Hydr. Material clamping with clamping pressure regulation - Coolant device - Chip conveyors - Total drive power 400 V / 8.5 kW - Space requirement approx. W 2350 x H max. 2340 x D 3050 mm - Weight approx. 3000 kg - from location D - 14943 Luckenwalde

This ZINSER 2425-I/3600 plasma cutting machine was manufactured in 2017. It features a CNC-controlled system for both plasma and oxyfuel cutting, handling materials up to 35 mm thick and pipes from 100 to 620 mm. The machine offers a working area of 2000 x 8000 mm and includes advanced features like a 3D plasma cutting system, CNC path control, and an integrated network card for enhanced connectivity. For more information about this machine, please reach out to us.

This 4-axis LASAG KLS 246 CL60 laser welding machine was manufactured in 2008. It offers advanced laser welding capabilities suitable for precision applications. Consider the opportunity to buy this LASAG KLS 246 CL60 laser welding machine. Contact us for more information about this machine.

power capacity: 1,5 kW volt: 380 V ampere: 5,75 A total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This IMA BIMA CUT 120/240 was manufactured in 2003. A CNC Wood Machining Centre featuring a processing range of X: 4200 mm, Y: 1200 mm, and a maximum clamping height of 100 mm. It includes a main spindle with a tool holder HSK F63 and a drive power of 7.5 KW. The machine also boasts a tool change magazine with 18 places and a variety of drilling and milling capabilities. Contact us for more information about this machine.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This GRIGGIO G 240P/5U was manufactured in 2007. It features a maximum planing width of 240mm and height of 160mm, accommodating workpiece sizes up to 240 x 160mm. Equipped with five spindles, including a universal turning shaft, and spindle speeds up to 6000 rpm. The machine allows smooth feed adjustments up to 30m/min. Weighs 4100kg with dimensions of 440x220x180cm. Contact us for more information about this machine.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This Engel duo 2400/650 electrical injection moulding machine was manufactured in 2019. It features a screw diameter of 60/70/80 mm, a screw stroke of 315 mm, and a maximum injection capacity of 890 cm³. The clamping force reaches up to 6500 kN with a maximum mold weight of 11000 kg. Consider the opportunity to buy this Engel duo 2400/650 electrical injection moulding machine. Contact us for more information about this machine.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This 6-axis ABB IRB 2400 M2004 robot arm was manufactured in 2007. It features a maximum handling weight of 10 kg and an impressive reach of 1.55 meters, with a total weight of 380 kg. If you are looking to get high-quality automation capabilities, consider the ABB IRB 2400 M2004 machine we have for sale. Contact us for more information.

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm : 100 x 100 mm material thickness: ca. 24,5 - 27 mm : 200 mm work height max.: 850 mm Weight: 980 kg Special item - The drill pattern on all side rails is offset downwards by approx. 1 mm. The clamping dimension for angle or table-to-table connection is not specified. < < Welding table like 25 years ago, additionally with plasma nitriding and current table feet >>. - high-quality steel S355J2+N + plasma nitriding - Drill holes in side panel in diagonal grid - Corners, edges and drill holes bevelled 45 - Construction reinforced by ribs - incl. base basic equipment 650 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

This KUKA KR 240-2 2000 robot arm was manufactured in 2009. It features a robust 6-axis system capable of handling a maximum total load of 640 kg, with an arm length of 1100 mm. Ideal for complex automation tasks, this robot arm can be installed on floors or ceilings, enhancing versatility. A great opportunity to buy this KUKA KR 240-2 2000 robot arm. Contact us for further details regarding this robot arm.

This HWACHEON Cutex 240 was manufactured in 2006. A robust horizontal turning machine featuring a Siemens control system and a 12-position tool turret. It supports a turning diameter of 350mm and a length of 700mm. If you are looking to get high quality turning capabilities consider the HWACHEON Cutex 240 machine we have for sale. Contact us for more information.

This 3-axis Hurco BMC 2416 vertical machining center was manufactured in 2000. It features a robust Ultimax control system, a spindle speed of up to 8000 rpm, and rapid traverse rates reaching 24003 mm/min. With a tool magazine of 24 positions and generous travels in X, Y, and Z dimensions (610, 406, 540 mm respectively), consider the opportunity to buy this Hurco BMC 2416 vertical machining center. Contact us for more information about this machine.

A complete bottle filling and capping line is available. Ring bowl diameter: 960mm, filling valve count: 24, capping stations (KK): 6, capping stations (SV): 6, capper diameter: 240mm, filler and capper pitch: 125mm, filling capacity (0.5l): 6000bottles/h, bottle volume: 330ml/500ml, operating hours: approx. 7200h. An on site inspection is possible.

Operating hours: 97’919 h Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 136 Rated power (kW): 75 Screw diameter (Ø): 55 Air valves: 4 Controllable

Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 460-800 mm Condition: Defective – for spare parts (Circuit board removed, hydraulic valve removed)

Number of boring spindles: 4 St. Working width: 230 mm Working height: 160 mm Feed motor: 11 kW Feed speed: 60 m/min. Control: Memory Plus The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Spiral mixer Diosna SPV 240 AF/TE Dough machine with program control Kneading machine for max. 240 kg dough with timer and 2 gears Connection 400V, 32A-CEE plug Used machine from the bakery

Operating hours: 75’851 h Operating pressure (bar): 210 Injection force (kN): 450 Closing force (kN): 2400 Opening stroke (mm): 0-510 Mold installation height: 260-600 mm Nominal voltage (V / Hz): 400/50 Nominal current (A): 100 Rated power (kW): 55 Screw diameter (Ø): 55

Pull-off trolley for 240cm deep pull-offs NEUWagen profile 40x40mm screwedExternal dimensions: W: 251cm D: 64cm H: 190cmInternal dimensions: W: 243cm D: 64cmSee pictureWe have various large pullers and pull-off trolleys in stockDetails see pictures

Key data: 550 mm

Max. saw length: 6,000 mm Smallest cutting length: 335 mm Max. saw blade diameter: 550 mm Automatic length positioning via E 500 control Swivel inside and outside 22.5° - 90° - 140° Tilt the angles between 45 and 90 degrees Digital Angle Displays Moving roller conveyor Minimum quantity spraying device Pneumatically folding support arms

Key data: 1 , 10

Oil-lubricated piston compressor Cooling: Air-cooled design Drive: direct-driven piston compressor Including 6 liter container (painted) Performance data Volume flow 270 l/min Operating pressure max. 10 bar Nominal power motor 1.8 kW Number of cylinders 1 Compressor stage(s) 1 Installation data Ambient conditions min. / max. 2 / 40 °C Sound level 73 dB(A) Voltage / Frequency 230 / 50. V / Hz Dimensions and weight Length x width x height 455 x 475 x 500 mm Weight 24 kg Compressed air outlet coupling Compressed air tank capacity 6 lt

This 3-axis Mitsubishi MV 2400S wire EDM machine was manufactured in 2015. It features an X-axis travel of 600 mm, Y-axis travel of 400 mm, and Z-axis travel of 310 mm. The machine can accommodate workpieces up to 1,050 mm in length and 820 mm in width, with a maximum weight of 1,500 kg. If you are looking to get high-quality wire EDM capabilities, consider the Mitsubishi MV 2400S machine we have for sale. Contact us for further details.

Cutting range at 90° Round: 210 mm Square: 210 mm Flat: 240 x 190 mm Cutting range at 45° Round: 150 mm Square: 150 x 100 mm flat: 150 x 100 mm Saw blade dimensions: 400 x 30 x 1.5 mm 2 lifting speeds by pole switching. Motor: 16 & 32 m/min Drive motor: 380 V, 0.9 kW Weight: 170 kg Space requirement: 1190 x 480 x 1300 mm

Lifting tipper Kemper HK 200 L for Diosna boiler Manufacturer : Kemper Type : HK 200 L Year of construction : 09.95 Tipping height approx. 193cm without boiler measured Dimensions approx. W: 100cm D: 140cm H: 275cm For Diosna kettle 160+200+240 Baker's condition See pictures for details.

Used Used Filler Bertolaso 24v isobaric: Year: 2001 Condition: Good Model: Suprema 24 Year: 2001 Speed: 2400 BPH with 0.75 l bottle Direction: clockwise Suitable for glass bottles 24 valves Isobaric filler with mechanical valve equipped with: ? pre-evacuation (vacuum pump not present) -self-leveling -degassing Manual tank height adjustment False bottles Safety protections Code: T 204 More details: https://bottlingscout.com

used lifting tipper Lippelt for Kemper  Manufacturer : Tippelt Mixer s.rl Type : BLT 240 FS Year of construction : 2014 For Kemper boiler 125+150 Tipping height 220cm Dimensions approx. W: 160cm D: 160cm H: 300cm Baker's condition  See pictures for details.

Technical data: - Galvanized version with collection container + hydraulically operated lifting roof - Load up to 35 t - Volume of double-walled collection container 2000 l - Distance between running track and roof / lateral opening height 1500 mm - Max. interior height 2300 mm - Connection 400 V - Space requirement approx. L 7100 x W 3300 x H 3050 mm - Weight approx. 7000 kg - from warehouse D - 14943 Luckenwalde

Key data: 3400 mm, 2700 mm, 1250 mm

Portal Milling Machine JOBS JOMACH 241 Year of construction: 1998 Travel X: 3400 mm Travel Y: 2700 mm Travel Z: 1250 mm Numerical Command: CNC Siemens SINUMERIC 840 D Table size: 3000 x 1500 mm Distance between uprights: 1700 mm 1 Tool Changer 32 Tools ISO 50 + 1 Tool Changer 32 Tools HSK-63 3 Milling heads - Axe C: 2 heads TWIST - ISO 50 + HSK 63 A + 1 head 3 axes ISO 50 Weight: 44 T

 Spiral Kneader Boku Kettle ALU Manufacturer : Boku Type : SK 240 ASCS For 160 Kg Flour , 240 Kg Dough We have 5 pieces in stock Details see picture

This 3-axis SCM Record 240 was manufactured in 2001. It features a vertical main spindle and a vacuum table for workpiece fixation. The integrated extraction system ensures a clean working environment, while the Becker vacuum pump provides efficient performance with an inlet capacity of approximately 240 m³/h. If you are looking to get high-quality CNC wood machining capabilities, consider the SCM Record 240 machine we have for sale. Contact us for further details.

automatic rotary machine,, in use for mustard,, set up on round plastic cups with a diameter of 70 mm and a height of 80 mm,, additional format for rectangular cups: 55 x 43 x 17.7 mm, Filling volume: 5 - 200 ml, Output: up to 1,500 cups per hour,, Rotary consisting of:, Cup magazine, automatic unstacking of the cups,, filling station,, Lid station with corresponding lid magazine and automatic unstacking of the lids,, Output of the filled and sealed containers to an integrated collection table

Deep pile Feeder Adjustable caliper Settings stand alone or online optional score/perf

EF 110 Program Display Deep pile Feeder Adjustable caliper Settings stand alone or online optional score/perf

table length: 2400 mm table width: 1200 mm table height: 200 mm bore: 28 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Used paddle mixer in acid-resistant design from Kramer Grebe type 249 with a capacity of 1500 liters.

A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible.

Boiler Lifter König HK 1100/2400SL for W&P UC80A Boiler - Boiler lifting tipper for Werner & Pfleiderer UC80 A boiler - Manufacturer: König Maschinen - Type: HK 1100 / 2400 SL - 400 volts - 4.5 kW - 50 Hz - Year of construction 2010

Used line for the production of yellow cheese from Obram. Capacity 10,000 kg/day.

Kettle vat for spiral mixer Boku SK 240Manufacturer : BokuType : SK 240 ASCSFor 160 kg flour, 240 kg doughA kettle for the spiral mixer Boku SK 240 is a container or vat specially made for this model of spiral mixer. The kettle is usually made of sturdy stainless steel and is used to pick up and knead the dough during the kneading process. The kettle for the Boku SK 240 spiral mixer is designed to ensure efficient and consistent dough processing. It might be useful to contact the manufacturer Boku or

â Product description: âœ" Condition: used, Baker's condition âœ" Manufacturer: Diosna âœ" Type: SP 240 AD âœ" Extendable âœ" For max. 240 kg dough, max.150 kg flour âœ" 2 speeds: slow and fast âœ" Spiral made of stainless steel âœ" With 1 stainless steel kettles Details see pictures.

Frame press, gluing press -operated: hydraulically -Working area up to: 3500 x 2400 mm -Wood clamping: pneumatic -Display dimensions: 4200/1100/H3700 mm -Transport dimensions: 4200/1200/H2300 mm -Weight: approx. 3500 kg

Screw-in heater, electric heater, electric heater, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, cartridge heater, high-performance cartridge heater -Manufacturer: hotset, heating element -Type: A06 Item No.: 246366 -Power: 800W 230V -Number: 2x elements available -Price per piece -Dimensions cartridge: O 8 x 285 mm -Weight: 0.1kg/pcs

Spiral mixer Diosna W 240 A Description Spiral mixer from Diosna Model W 240 A with 2 stainless steel boilers in good condition. The machine is equipped with new Omron control. Manufacturer: Diosna Dierks &, Söhne GmbH Type: W 240 A Condition: overhauled For max. 240 kg dough Capacity With 2 stainless steel kettles Optionally with several kettles With kettle tongs locking

Refrigeration compressor, refrigeration unit, cooling compressor, refrigeration unit, cooling compressor, compressor, filter dryer housing, shut-off valve, ball valve, temperature switch, thermostat, expansion valve, safety valve -Manufacturer: Hansa, safety valve, unused, original packaging -Type: KSV 28 bar 2442280050 -Connection: G1/2 -Price: per piece -Number: 7 pieces -Package dimensions: 150/80/H55 mm -Weight: 0.6 kg/piece

PTC relays, contactors, semiconductor contactors, relays, fiber optic converters -Manufacturer: Phoenix Contact, DIN rail power supply -Type: QUINT-PS 3x400-500AC/24DC/5 -Order No.: 2938594 -Number: 3x power supply units available -Price: per piece -Dimensions: 130/70/130 mm -Weight: 1 kg

Boku SK 240 AS CS Spiral mixer completely overhauled Description Used Boku spiral mixer type SP 240 AS CS with digital control. With 2 stainless steel boilers on trolleys. The mixer is suitable for a maximum of 240 kg of dough or a maximum of 150 kg of flour. The machine has 2 speeds and 2 mixing time zones. Optionally, you can get the machine with a lifting tipper and with up to 4 boilers. Manufacturer: Boku Maschinenfabrik GmbH / Diosna Type: SK 240 AS CS Condition: completely overhauled Material: Stainless steel spiral For max. 240 kg dough, or for max. 150 kg flour With 2 timers Automatic with 2