butter machine used for sale

sheet thickness: 1.25 mm steel Roller center distance: 63 mm

Manufacturer TRUMPF Type L 3030 Year of construction 2005 Working range 3,000 x 1,500 x 115 mm Control Siemens Sinumerik 840D Laser power 2,700 watts Accuracy +/- 0.1 mm Equipment: Rotolas Closed machine frame PCS Automatic pallet changer Longitudinal conveyor belt for small parts/waste Laser Power Control Control Siemens: Open PC-based controller, simple operation, online help, diagnostic functions, maintenance hole book, technological data, teleservice Safety: Multi-beam photoelectric sensors, beam guidance fully encapsulated and ventilated, monitoring system, multi-chamber extraction and compact dust collector, protective cabin DIAS height control Automatic focus position adjustment AutoLas Plus Network connection (RJ45) by installation via teleservice The machine is in good condition. Location Germany, visit by appointment. Errors in the technical data and pri ...

Unused Turbovac Dip Tank - TV40/60 with air dryer The Turbovac dip tank and drying / cooling units offer you the ideal solution to complement your packaging line. Compared to vacuum pack / vacuum bags only. The Turbovac dip tank offers wrinkle-free transparency and significantly better product presentation. This is done by using heat and water to shrink the extra bag surrounding your product. Adding a drying unit will improve your packaging line and make it easier to label your product. Both machine types are designed to be integrated into the control of a vacuum packaging machine or alternatively they can operate independently. Manufacturer: Turbovac / Henkovac Type: TV40/60 Year: 2017, unused Material: Stainless steel Chassis dimensions (LXS) 570x400mm Immersion length 300 mm The maximum height of the product is 250mm Maximum water volume 70 liters Maximum product ...

AMG S820 plasma-gas cutting machine built by the Taiwanese company ASIA MACHINE GROUP in 2013, is used for precision cutting of workpieces made of carbon steel and acid-resistant steel. The machine characterised by a robust and high-quality construction has two torches – a HYPERTHERM plasma torch with THC voltage height adjustment and collision protection, and a KOIKE gas torch with functions for automatic piercing. The plasma cutting machine performs workpiece cutting processes on a large work table of surface area (L x W) 6100 x 2500 mm with an additional laser pointer to facilitate workpiece positioning on the table. In order to eliminate any contamination generated during laser and gas cutting, the usual exhaust extraction has been replaced by an waterbed table powered by water with a pressure of up to 2 bar. The water mirror in the table’s bath effectively absorbs the exhaust ...

grinding diameter: 5 - 255 mm grinding length: 300 mm centre height: 130 mm grinding length at plunge grinding: 50 mm control: SINUMERIK 805 grinding spindle speed: 25 - 1400 U/min work piece spindle speed: 0 - 500 U/min feed of grinding spindle slide cross: 0 - 5000 mm/min table speeds: 0 - 5 m/min grinding wheel diameter: 450 mm total power requirement: 10 kW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 2,65 x 2,2 x 2,35 m Accessories: grinding wheel with flange, 3-jaw chuck, electron. hand wheel The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diosna Wendelkneter Type: W120 Carousel 4 stainless steel boilers with lifting tipper with control cabinet Carousel Painted

MAX DIAMETER 750,MAX MODULE 10

Lapping machine Wentzky - Lapping discs diameter 700 mm Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

W&P Batch Kneader Type: UC 80 A with stainless steel boiler Stainless steel spiral Flour dust cover 2x automatic timers 2x speeds for max. 120 kg dough

- Sino SDS6-3V 3-axis position display - magnetic and manual spindle brake - 3 jaw chucks ø 250 mm - 4 jaw linings ø 320 mm - Stop Z-axis - fixed & running bezels - Multifix Type C incl. 4 holders - Face disc - Lighting system - Coolant sealing Specification - Center width: 1000 mm - Circulating Ø over bed: 500 mm - Circulation Ø over slide: 325 mm - Orbital Ø in eruption: 630 mm - Bed width: 330 mm - Spindle bore Ø: 80 mm - Spindle cone: Metric 80 C8 / D1 - D8 - Speed range: 24 - 1600 rpm - Speed levels: 15 - Metric threads: 0.5 - 28 mm (66 steps) - Inch thread: 1 - 56 tpi (66 steps) - Module thread: 0.5 - 3.5 mm (33 steps) - Thread with diametrical slope: 8 - 56 dp (33 steps) - Longitudinal feed: 0.072 - 4.038 mm/rev (66 steps) - Transverse feed: 0.036 - 2.019 mm/rev (66 steps) - Tool holder: 25 x 25 mm - Tailstock Pinole Ø: 65 mm - Tailstock pinole ...

Gehring Honing Machine E 630-45 - Honing diameter: 3 - 45 mm - Honing length max: 350 mm - Number of honing spindles: 1 - Stroke length: 2 - 630 mm - Electric lift drive - Lifting speed: 1 - 40 m/min - Stroke control: infinitely variable - Spindle speed: 150 - 6000 1/min Good condition, fully functional, can be viewed and tried out on site. Shipping also abroad. Viewing: Basically, I would like to point out that the article can be viewed and tested under power before purchase in order to rule out misunderstandings. Please ask questions before purchasing to avoid confusion. If you have any general questions or would like to make an appointment for a viewing, I can be reached at any time on the telephone number below or above. Errors in the description and prior sale excepted. VAT is shown separately on my invoices. Shipping with forwarding agent.

Vario - Snow removal blade Samasz PSV 301. Universally hydraulically adjustable blade – wedge plough or side clearer left-right use possible. Working width max./min. 303/262 cm, blade height 80/98 cm, rubber skirting strips, special equipment: training wheel set, plough lighting, electric 12 volt cable remote control for light and hydraulic control block. 1 hydraulic connection dw required. Weight approx. 480 kg. Almost new condition. Further snow removal blades, snow blowers and slingshots as well as spreading technology in stock - see also sample photos! Info and offers on request. No sending of package deals or lists. Please name and phone no. for queries. Please let us advise you in advance by phone. Appointment required for viewing!

This 3-axis FALCON FSG-3A1224H surface grinding machine was manufactured in 2015. It features handwheel graduations of 0.01 mm, 0.002 mm, and 0.2 mm for precise adjustments. The dedicated pendant control panel includes an emergency stop button and an analog meter for enhanced operational safety. If you are looking to get high-quality grinding capabilities, consider the FALCON FSG-3A1224H machine we have for sale. Contact us for further details.

Folding Machine manufactured in 2022. This TRUMPF TruBend Center 7030 (B34) features a maximum bending edge length of 3,123 mm and a holder clamping force of 101 t. It includes a 2-axis part manipulator with a travel of 2,653 mm and an automatic loading/unloading system. If you are looking to get high-quality bending capabilities, consider the TRUMPF TruBend Center 7030 (B34) machine we have for sale. Contact us for further details.

BÜHLER ECOLINE S PRO 34 die casting machine was built in 2018 in Switzerland by Bühler AG. The machine was used occasionally and is in very good technical condition. The BÜHLER ECOLINE S PRO 34 is designed for the die-casting of aluminium alloy components. It enables the efficient, mass production of aluminium castings used, among others, in the automotive, electronics and machinery industries. In the die-casting process, liquid aluminium is injected under high pressure into a closed die. Once the die is filled, the material cools and precisely takes on the die’s shape. The combination of this technology with a high clamping force of 336 tonnes enables the production of repeatable castings with even the most complex geometries. The BÜHLER ECOLINE cold-chamber die-casting machine is part of a complete production line designed for aluminium die-casting. It includes an ABSOLENT  ...

grinding diameter: 350,450 mm grinding length: 600 mm centre height: 175,225 mm grinding wheel diameter: 400 mm grinding wheel width: 50 mm bore: 127 mm : MK5 work piece spindle speed: 20-400 U/min workpiece spindle - bore: mm grinding head swivelling: 360 ° grinding spindle head - swivable: 180 + - ° grinding spindle speed: 1500,1700,2200 U/min : 0,001-0,030 mm/Ø : 0-0,95 mm/Ø : ±10 ° longitudinal feed of the table: 900 mm table speeds: 0,02-6 m/min : 130 kg : 130 inkl. Spannugkg kg : mm grinding depth: mm : 70 mm total power requirement: 6,5 kW weight of the machine ca.: 2,2 t dimensions of the machine ca.: 3,1 x 2,0 m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines. Foto von bereits gelieferter Maschine m ...

Giana lathe mod. GFP14 - 710x 5300 - year 2007, control FAGOR GFP14

This 3-axis CHARMILLES Roboform 2000 was manufactured in 1995. It features a maximum workpiece dimension of 880 × 550 × 225 mm and operates with a maximum machining current of 64 A. With only 1,497 operating hours, this machine has been used primarily for training purposes. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 2000 CNC Die-Sinking EDM machine we have for sale. Contact us for further details.

This 3-axis ONA AE600 Wire EDM machine was manufactured in 2007. It features an X-axis travel of 800 mm, Y-axis travel of 600 mm, and Z-axis travel of 500 mm. The machine can accommodate workpieces up to 1,300 mm in length, 1,040 mm in width, and 500 mm in height, with a maximum weight of 5,000 kg. If you are looking to get high-quality wire capabilities, consider the ONA AE600 machine we have for sale. Contact us for further details.

Hydraulic injection moulding machine manufactured in 2019. This Arburg ALLROUNDER 270 C 400-100 features a clamping force of 400 kN and an opening stroke of 350 mm. It has a maximum injection pressure of 2500 bar and a shot weight of up to 29 g. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 C 400-100 machine we have for sale. Contact us for further details.

Fully functioning mobile X-ray system. Very good condition.

Working range: 5mm-50mm, max. tool spindle speed: 25000rpm, geometries: spheres/aspheres, operating modes: manual/automatic, collision avoidance and precision via integrated center thickness measurement, control: CNC. Machine dimensions X/Y/Z: approx. 700mm/1350mm/1950mm, weight: approx. 850kg. Documentation available. Inspection possible by arrangement.

This 4-axis Gildemeister CTX 400 twin was manufactured in 2001. It features a maximum swivel diameter over bed of 570 mm and a maximum turning length of 635 mm. The machine is equipped with a Heidenhain CNC Pilot control system and offers a speed range of 25 – 5,000 min⁻¹. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 400 twin horizontal turning machine we have for sale. Contact us for further details.

Horizontal turning machine manufactured in 2014. This SEIGER SLZ 500E features a center distance of 1500 mm and a swing diameter over the bed of 500 mm. It is equipped with a powerful main drive of 20/25 kW and a maximum spindle torque of approximately 1400 Nm. If you are looking to get high-quality turning capabilities, consider the SEIGER SLZ 500E machine we have for sale. Contact us for further details regarding this machine.

This 3-axis Hypertherm HPR130XD plasma cutting machine was manufactured in 2013. It features a power output of 130A with a 100% duty cycle, and operates at a voltage input of 400V. The included TEKA air extraction unit has a volumetric flow rate of 7500 m³/h and a motor power of 7.5 kW. If you are looking to get high-quality plasma cutting capabilities, consider the Hypertherm HPR130XD machine we have for sale. Contact us for further details.

Kronen S021 vegetable cutting machine Serial: 021-016 2014 Stainless, The vegetable cutting machine S021 is perfectly suited for cutting decorative spirals of vegetables (e.g. carrots, potatoes, pumpkins, radishes, celeriac, beetroots, zucchinis, etc.) very quickly and simply. By means of variable tools a multitude of spiral thicknesses (e.g. 2 x 2 mm, 2 x 8 mm, 2 x 10 mm - other versions on request) can be produced with a max. product length of 250 mm."

CO₂ laser cutting machine manufactured in 2006. This Prima Industrie Platino 1530 features a laser power of 4 kW, with an X-axis travel of 3,000 mm and a Y-axis travel of 1,500 mm. It includes an automatic loading system, an automatic unloading system, and a vacuum system. If you are looking to get high-quality cutting capabilities, consider the Prima Industrie Platino 1530 machine we have for sale. Contact us for further details.

ZIMMER+KREIM PEC 850 die-sinking EDM machine, year 1994. Further details, technical data and photos on request.

Two identical Dreher centrifugal drum machines are offered. Number of drums: 4, total volume: 20l, drive power: 1.5kW, direction of rotation: clockwise/counterclockwise, speed control: continuously variable. Machine dimensions: approx. 1200mm/1000mm/1600mm, weight: 280kg. An on-site inspection is possible.

Eillert C25 H Potato rumbler Serial: 4149308 Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph

12fill VMP semi auto filling machine semi auto filling machine with volumetric dosing system, ideal for pastes, creams, sauces and pates, 100ml to 1000ml, up to 25 fills per min, mobile frame with foot pedal

Manufacturer: AWEMA AG Model / Type: UDM111Pos1+5 Type of machine: Universal Depositing Machine with One-Shot technology Year of manufacture: 2009 Capacity: Up to 800 kg per hour, depending on product type and mass viscosity Voltage: 3x400N+V+PE Frequency: 50 Hz Power: 9000 VA Find more here - .ucymachines/ Contact us at - sales@ucymachines

Bljalbers BLJ150 pot sealer Serial: 10150002 2010, Stainless pot sealer, seal up to 6 pots at once, adjustable temp control, previously used for 100mm diameter pots, mobile frame, 1Ph

Eillert C25 H Potato rumbler Stainless, 25Kg capacity, suitable for potatoes, carrots and other root veg, 3Ph

This 3-axis MTE BF 4200 was manufactured in 2002. It features an impressive X-axis travel of 4,000 mm and Y-axis travel of 1,200 mm, with a robust table size of 4,200 × 1,000 mm and a maximum table load of 13,000 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 4200 bed type milling machine we have for sale. Contact us for further details.

This 3-axis MTE BF 2200 Bed Type Milling Machine was manufactured in 2004. It features a substantial X-axis travel of 2,000 mm, Y-axis travel of 1,000 mm, and Z-axis travel of 1,000 mm. The machine includes a large table size of 2,200 × 1,000 mm and can handle a maximum table load of approximately 7,200 kg. If you are looking to get high-quality milling capabilities, consider the MTE BF 2200 machine we have for sale. Contact us for further details.

Reference Num.: 4467 Brand: Theisen Bonitz Type: TB Sprint 315 VP + 303 Construction year: 1995 Available: directly Status: In production Location: Deutschland Equipment: - 15 Stationen - Doppelbogenkontrolle - Fehlbogenkontrolle - Heft-, Falz-, Schneideaggregat Theisen Bonitz

Ser. No.: L. 09/31 // Fabr. No.: 0270180/1 Pockets : 4 parallel fold Format (mm): max. 297 x 420 // min. 148 x 210 Equipment / Additional information: With delivery A45/1A-DC Power 400V

Wire strapping WAHLER Plant description Automatic WAHLER wire strapping machine (WDU-750-BDFB), construction year 1995, for the strapping of paving stones and high concrete products (bricks, curbs, etc.). Strapping height minimum: 30 mm above OK board Strapping frame size 3 (1,500 x 1,250 mm => board size 1,400 x 1,100 mm) Components: - Base frame to accommodate the lifting frame frame in welded Profile steel construction - Clamping and closure unit for galvanized flat steel wire 1.60 x 0.60 mm - Double lifting device for 2 strapping at different heights (adjustable) - Strapping frame in welded angle steel version with pneumatically operated wire guide rails made of highly wear-resistant steel - Stone compactor, acting on all sides - Wire unwinding device - Pneumatic equipment with valves, compressed air cylinders, etc. - Control cabinet with PLC cont ...

Travel X/Y/Z/W: 1500mm/1250mm/1000mm/550mm, B-axis: 360°, boring spindle diameter: 110mm, spindle speed: 4000rpm, gear ranges: 2, rapid traverse: 15m/min, tool taper: SK50, table dimensions X/Y: 1000mm/1250mm, T-slot width: 22mm, height of clamping surface above floor: 1050mm, max. table load: 6000kg, control: Heidenhain TNC 426. With electronic handwheel. Weight: approx. 13500kg. An on-site inspection is possible.

Gluing machine Sumbel Coronel 120; good condition; cleaned and tested; Working width 120mm; 2-roller system; Glue basin height-adjustable; suitable for cold glue. Gluing machine Sumbel Coronel 120; good condition; cleaned and checked; working width 120mm; two roller system; glue reservoir adjustable in hight; used for cold glue.

Filling is established with a 2¨flow meter - FLOW 33 accuracy 0,5% 1.2 The machine is built with ΙΝΟΧ ASI304 1.3 The machine will come with a full closed cabin for hygiene 1.4 Closure of bucket with film per kg & UV lamp 1.5 Automatic conveying per kg 1.6 Automatic over cap Applicator for 2,5 & 5 kg 1.7 System for CIP connection 1.8 Control panel with touchscreen Siemens IP65 and PLC Siemens, immediate choose of kg .The change over is immediate and needs no handling 1.9 Capacity 4,5t/hour on 5kg 1.10 ΗΕΡΑ filter in cabin 1.11 Stainless steel lobe pump OMAC Type : ΒΕ 220 Machine dimensions: Length : 5 meters Width : 1 meter Height : 230 meters

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009 Sale exclusively to traders or export! We have more than 400 bakery machines and more than 300 ovens permanently in our warehouse in Bielefeld. Multiback Bakery Technology Artur-Ladebeck-Straße 171 Bielefeld

Travel X/Y/Z: 650mm/500mm/475mm, table dimensions X/Y: 1530mm/450mm, max. table load: 400kg, spindle taper: SK40, max. spindle speed: 4000rpm, spindle power: 7.5kW, milling head swivel range: 140°, control: Heidenhain TNC 620. Weight: approx. 2750kg, machine dimensions X/Y/Z: approx. 2200mm/2300mm/2050mm. An on-site inspection is possible.

Webo in-line drilling machine - 2 machines: speed 90 - 1000 1/min. - 4 machines: speed 4000 - 6000 1/min. - Coolant device - Tool holder: MK2 - Width: 200 cm - Height: 200 cm - Depth: 100 cm Good condition fully functional can be visited and tried out on site. Shipping also abroad. Sightseeing: Basically, I would like to point out that the article, in order to avoid misunderstandings, can be viewed before the purchase and tested under electricity. Please ask questions before buying to avoid ambiguity. For general questions or an appointment for a viewing, I can be reached at any time at the telephone number below or above. Errors in the description and prior sale excepted. VAT will be shown separately on my invoices. Shipping with freight forwarder.

Condition: used, with visible signs of use, was operational until placed in storage, control voltage: 24V, operating voltage: 230V, frequency: 50Hz, CO₂ pressure: 10bar, connected load: 500W, with CE marking. An on-site inspection is possible.

Kuper Veneer Zigzag Veneer Composition Machine, Type FW/ 1200-E Year of manufacture 1995 S/N 3508 3179 Special features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely adjustable zigzag width of the glue thread cutting device veneer thickness : 3.0 mm min. veneer thickness : 0.3 mm Glued thread with hot air heating Compressed air generation Discus for transporting the veneer over the veneer table Control via foot pedal Feed Speed: 35-60m/min Voltage: 400 V, 50 Hz Total power 1.35 kW Working height 915mm Bzunfcilke Weight approx. : 440 kg Dimensions : 2,12m x 0,73m x 1,55m

Automatic Coil Cut-to-Length Line manufactured in 2025. This SACFORM CRL1503-6 is designed for processing aluminum, mild steel, and stainless steel with a material thickness capacity of 1-3 mm. It features a maximum coil weight of 6000 kg and a finished sheet length of 500-4000 mm. If you are looking to get high-quality cut-to-length capabilities, consider the SACFORM CRL1503-6 machine we have for sale. Contact us for further details regarding this machine.

Used dough dividers from Werner & Pfleiderer type Parta U with 3 chambers. The machine is equipped with a large stainless steel hopper and can be driven on rollers. The Parta U is very suitable for dough division for companies with higher quantities per hour.The dough weigher is complete with Edestahl cladding. -with stainless steel funnel -completely in stainless steel -Year of construction 2009

Dimensions (L/W/H): 2650x950x1850 mm Weight: 2100 kg Total power requirement: 15 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.