burner weishaupt used for sale

Fully automated sand-lime brick factory. 50,000 tonnes/year. Modernised in 1986, 2000 & 2019. The current plant meets today's high safety standards and has been continuously modernised and modified. The residual steam is reused for heating company buildings. Packaging installation: fully automatic The entire installation is fully automated, with the exception of the manual opening and closing of the autoclave doors. 2x Atlas Krupp Polysius presses (1 with new Bosch Rexroth hydraulic system and controls) Forming boxes for different stone formats Conveyors and silos Primary crusher Gyradisc 36 Jg. 1980 Fine crusher SBM V8 machine nr.12041/2X Vibrating screen GFA sieve 0-3mm Mixer machine factory Gustav Eirich, type DE 22 Machine no. 23104, built in 1984, with vortex device capacity 1500 lt/ 2400 kg Eirich mixer, with agitator 1.5 m or 2.5 t 2 x reactors Namur mixer, with w ...

Capacity: 90kg of green coffee per roast ( up to 360kg per hour) Roasting time: 12-15 minutes Voltage: 400V, 3 phase (other voltages by request) Pneumatic green coffee loader, destoner and cyclone included Optional afterburner Gas: natural gas/LPG Burner: Weishaupt-idirect The roaster is currently disassembled and ready for refurbishing. It will be completely refurbished featuring: new insulation new bearings new direct drive motors with speed control on the destoner, drum and exhaust fan new pneumatics new electric cabinet and controls (optional: PLC and touchscreen with automatic roasting and profililng) new cooling bin sheathing modulation of the burner will be installed new paint (powder coating and temperature resistant paint) Inspection of the roaster is possible at any time.

Drying plant aluminum for corn and grain, Direct air heater 1200 KW, Weishaupt burner L5, 1 fans 30 KW, wet elevator galvanized, control cabinet. Mob. + 491715213204

Deck baking oven W & P, type: Matador MD 101 - In the bakery State - 5 floors - 2 thermal circuits (upper 2 burners and bottom 3 flock) - oil burner weishaupt - 1 stone slab broken but spare available - regular maintenance - last 2016 - in one piece (mounted) -in the bakery condition - condition: good baking surface: 9.6 m2 Hearth size: B T 1.60 x 1.20 m The furnace is located in the bakery. An application is possible in one piece and can be applied on request, like us.

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 400 Capacity : 350 kg/h Nominal heat output : 233 kW Operating pressure max. : 31 bar Previously operated with : 11,8 / 13 bar Water content approx. : 39 l Year of manufacture : 2008 CE mark : 0036 equipped with Weishaupt gas burner type WG 30N / 1-C, ZM-LN version, gas control system, 15-500 mbar, Feed water pump, control cabinet, mounted on the boiler body and the existing coarse and fine fittings. Steam dryer LOOS Type SDM, capacity 6 l, operating pressure 31 bar, test pressure 56 bar, max. temp. 200 °C, year of construction 2008 LOOS feedwater module mounted on frame, capacity 500 l, with control cabinet, Dosing vessel, sample water sampling cooler, booster pump Dimensions: 1700 mm x 1000 mm x 1950 mm

Output: 20t/h, with Burner Weishaupt WM-GL 20 3-A, fuel: oil, natural gas, year of construction: 2018, various elements were renewed in 2018.

Used deck oven MIWE, type: Ideal 1000 / 5 DS-ZK -in bakery condition- - 5 floors, 10m² baking surface - with gas burner from WEISHAUPT - Digital control - Incl. 6 pullers - Incl. spare parts - Incl. proofing cabinet MIWE Garomat CS - was still in operation until the end - Expansion necessary - Expansion via us from EUR 2,000 Sale by closing. Viewing possible by appointment.

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 500 Capacity : 500 kg/h Thermal power : 334 kW Operating pressure max. : 18 bar Water content approx. : 43 l Year of manufacture : 1996 equipped with Weishaupt gas burner, gas control system, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

2 Gebr. Steam generator ----------------------------------------- Manufacturer : JUMAG Type : DG560 Capacity : 560 kg/h Thermal power max : 400 kW Operating pressure : 13 bar Test pressure : 23 bar Water content approx. : 75 ltr CE mark : CE 0036 Year of manufacture : 2013 equipped with Weishaupt gas burner WG40N/1-A Ausf. ZM-LN 55- 550 kW, Nox-Cl. 3, Gas control system, Control cabinet with touch control, mounted on the boiler body. without Eco, without automatic blowdown

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 600 Capacity : 600 kg/h Thermal power : 400 kW Operating pressure max. : 13 bar Water content approx. : 43 l Year of manufacture : 2001 Year of manufacture heating coil : 2010 equipped with Weishaupt oil burner WL40 Z-A, Power 145-570 kW, oil flow rate 12-48 kg/h, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

2 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 1000 Capacity : 1,000 kg/h Ab. Operating pressure : 31 bar Test pressure : 56 bar Water content approx. : 110 l Heating surface : 21,9 m² Year of manufacture : 2007 CE mark : 0036 equipped with Weishaupt combi burner gas & oil, Type WM-GL 10/3-A, Ausf. ZM-T, 110-1,000 kW, Oil flow rate 20-84 kg/h, gas control system, feed water pump, Control cabinet, mounted on the boiler body and the existing coarse and fine fittings.

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 1000 Capacity : 1,000 kg/h Ab. Operating pressure : 13 bar Water content approx. : 110 l Heating surface : 21,9 m² Year of manufacture : 1992 equipped with Weishaupt gas burner, Gas control system, feed water pump, Control cabinet, mounted on the boiler body and the existing coarse and fine fittings.

Sodiet SM35 Steam boiler Serial: 5741 2005, volume 566L, 19.6Bar, max 188'C, 1230Kgs, with Weishaupt burner

WEISHAUPT FUEL BURNER - IN WORKING ORDER - LITTLE USED -

1 Gebr. High-speed steam generators ---------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : DF 300 Capacity : 300 kg/h Heat output : 200 kW Operating overpressure : 31 bar Previously operated with : 13 bar Test pressure : 56 bar Water content approx. : 39 l Year of construction : 2008 CE mark : 0036 equipped with Weishaupt gas burner WG30N / 1-C, ZM-LN, 40-350 kW, control cabinet, mounted on boiler body and the existing coarse and fine fittings.

1 Gebr. Low Pressure Steam Boiler -------------------------------------------- - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : U-ND 500 Power approx. : 500 kg/h Operating overpressure : 0.5 bar Test overpressure : 2 bar Water capacity full approx. : 770 l Year of construction : 2005 equipped with Weishaupt combi burner gas&oil, GL3/1-E, ZMD, 90-630 kW, 15-500 mbar, oil flow rate 16-53 kg/h, gas control system, Control cabinet with C7 control, feedwater pump and the existing coarse and fine fittings.

1 Gebr. Low Pressure Steam Boiler --------------------------------------------- Manufacturer : LOOS, Gunzenhausen Type : U-ND Capacity : 800 kg/h Ab. Operating overpressure : 1 bar Increased test pressure : 2 bar Total. : 1.108 l Year of construction : 2004 CE mark : 0036 equipped with Weishaupt gas burner G5/1-D, ZMD-LN, 200-900 kW, 120°C, gas control system, Control cabinet with touch panel and the existing coarse and fine fittings. 1 Gebr. Feedwater module ------------------------------------ Manufacturer : Loos, Gunzenhausen Type : WSM Content approx. : 800 l with control cabinet, sample water sampling cooler, 2 dosing vessels

1 Gebr. Boiler --------------------------- Manufacturer : LOOS International Type : U-HD 500 Heating surface approx. : 9 m² Capacity : 500 kg/h Ab. Operating overpressure max. : 13,00 bar Increased test pressure : 24.05 bar Water capacity full approx. : 770 l Year of construction : 2007 CE mark : 0036 equipped with Weishaupt combination burner oil&gas Type RGL3/1-E, ZMD, 15-500 mbar, gas control system, Control cabinet with Siemens C7, feed water pump and the existing coarse and fine fittings

1 Gebr. Boiler ----------------------------- - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : U-HD Heating surface approx. : 14 m² Capacity : 800 kg/h Ab. Operating pressure : 10.0 bar Increased test pressure : 18.5 bar Water capacity at NW approx. : 748 l Water capacity full approx. : 1.108 l Year of construction : 2001 equipped with Weishaupt gas burner WMG10/3A, ZM, 100-1.000 kW, 15-500 mbar, Nox cl 2, year 2015, Gas control system, control cabinet, feed water pump and the existing coarse and fine fittings.

1 Gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1,000 kg/h Operating overpressure : 13 bar Increased test overpressure : 23.4 bar Water content at NW approx. : 993 l Water capacity full approx. : 1.365 l Year of construction : 1994 1 tube blind law equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 Gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1,000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water capacity full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 Gebr. Boiler --------------------------- Manufacturer : LOOS Gunzenhausen Type : U-HD Heating surface approx. : 20 m² Power max. : 1,000 kg/h Operating overpressure : 10 bar Increased test overpressure : 18.5 bar Water content at NW approx. : 993 l Water capacity full approx. : 1.365 l Year of construction : 1991 equipped with Weishaupt oil burner, control cabinet, feed water pump, and the existing coarse and fine fittings

1 Gebr. Boiler ---------------------------------- - mounted on frame - Manufacturer : Jumey Heating surface approx. : 40 m² Capacity : 2,000 kg/h Operating overpressure max. : 10.0 bar Previously operated with : 5.0 bar Water capacity at NW approx. : 3,540 l Water capacity full approx. : 4.750 l Year of construction : 1994 equipped with Weishaupt gas burner, gas control system, Control cabinet, feed water pump, and the existing coarse and fine fittings.

1 Gebr. Boiler ---------------------------------- Make : BABCOCK OMNICAL Type : Omnibloc Power max approx. : 3,200 kg/h Heat output : 2.2 MW Operating overpressure : 10.0 bar Test overpressure : 18.5 bar Steam temp. max. approx. : 184°C Water capacity full approx. : 7.400 l Year of construction : 2013 CE mark : 0091 equipped with Weishaupt gas burner WM-G30/2-A, ZM-LN, 400-3,800 kW, 15-500 mbar, gas control system, Control cabinet, separate touch panel, feedwater pump, Eco and the existing coarse and fine fittings.

1 Gebr. Boiler ------------------------------------ - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : UL - S Heating surface approx. : 80 m² Capacity : 4,000 kg/h Bish. Ab. Operating overpressure : 16 bar Increased test overpressure : 30.4 bar Water content at NW approx. : 5.930 l Water capacity full approx. : 8.020 l Year of construction : 2003 CE mark : CE 0036 equipped with Weishaupt gas burner G50 / 1 - B, Version ZM-NR 550 – 4,000 kW, NoxCl. 3 Built in 2009, separate control cabinet, feedwater pump, integrated economizer, type Eco1, 110 kW, 29 ltr., 31 bar, 238°C, Built in 2018 and the existing coarse and fine fittings.

1 Gebr. Boiler ------------------------------------ - mounted on frame - Manufacturer : LOOS, Gunzenhausen Type : UL - S Heating surface approx. : 80 m² Capacity : 4,000 kg/h Bish. Ab. Operating overpressure : 10 bar Increased test overpressure : 18 bar Water content at NW approx. : 5.930 l Water capacity full approx. : 8.020 l Year of construction : 1994 equipped with Weishaupt combi burner gas&oil type RGL 10 / 1 - D, ZMD version, separate control cabinet, feedwater pump and the existing coarse and fine fittings.

General SKU050A271 LocationBarneveld MakeD.O.S. Dutch Oven Systems Year of construction1995 Main Features MaterialMild steel Volume2500 Ltr. Specified Features - Drying oven Drying oven(1x) Number of compartments:1 Capacity2500 Ltr Internal width1050mm Internal depth1450mm Internal height1750mm Gas heatingcheck Number of doors:1 With fancheck Motor2,2 KW MaterialMild steel Information With switchgearcheck Floorspace2,0x2,2 M Total height3,2 M Extra Specifications- Burner make Weishaupt, type WG-10N/1A (10-42 KW) Drying ovensDutch Oven SystDryers > Drying ovensBrand > Dutch Oven Syst What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Petroncini 120 kg in perfect condition. Engines maintained, bearings changed and belt changed. No work required, ready to use. It is composed of : - Green coffee charger with Siemens motor - Overhauled Weishaupt burner in perfect condition (see photo for technical data) - Cooling tray. - Cyclone film collector - Complete electrical panel - Full roasting cycle control panel.

2 pieces available Year of construction 2013 TC Control with Weishaupt gas burner with extractor hood incl. 3 stainless steel rack trolleys available per oven External dimensions approx.: 150 x 170 H 260cm Weight approx. 1,500kg

Chaudiere Socother steam boiler, type: STT 350, fabrication number: 43470, year of construction: 1987, 410 kW, working pressure: max 49 kPa, test pressure: 300 kPa, steam production: 560 Kg/h with Weishaupt burner, model: WG40N/1-A ZM-LN, serial number: 591230009, 230 V, 1 Ph, 50 Hz, 0.94/0.85 kW, gas heated, unit build in container, dimensions container: 2400 mm x 3300 mm x 2600/3000 mm.

Dimensions: 1.5 m x 4.2 m x 1.5 m (approx. WxLxH) H without WT (WT=1.5 x 1.5 x 1.5 m) Heating unit: 267 kW Brenner : Gas burner, make ELCO Exhaust fireplace : stainless steel, single-walled, diameter 250 Supply air unit: 22,800 m3/h; 7.5 kW; n = 960 rpm Exhaust unit: 22,500 m3/h; 7.5 kW; n = 960 rpm Piping : Supply and exhaust air pipes, deflector hood Electrics : Control cabinet, frequency inverter control with speed control This unit set has already been sold! However, we will soon get a similar aggregate set back in. Please contact us. We also have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Cat.-Nr. 11-3200 new Necessary space for mash and lauter tun: LxWxH: 3 x 2 x 2,80 m Necessary space for tanks: LxWxH: 4,0 x 5,0 m complete 2 brews / day = 10hl Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 5 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (10 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking th ...

Cat.-Nr. 11-3210 new Basic Equipment The Brew House is complete with all equipment. All equipment are with high standard an very simple to use. This 10 hl Brew House is built as 2 devices-brew house manual version with manual butterfly valve. It is possible to make 2 brews/day (40 hl) Technology All the pipes can be cleaned and sterilized in the circuit over the pump included. a) In the mash boiler the mash will be cooked, then it will be pumped with one beer pump made of stainless steel from mash boiler to the lauter tun. b) After the lauter wort will be pumped back to the mash boiler. c) After emptying the lauter tun the grit floor will be removed. The lauter tun will be changed to a whirlpool. d) After cooking the hops a special injection valve is introduced inside the lauter tun so that it can be used as a whirlpool. Mashing Tun / Wort Boiler Volume brutto: ...

Cat. No. 11-3210 New Plant description Sudwerk This small-sud plant comprises all components for a complete and fully functional brewing plant. All system parts used have a high quality standard and are characterized by their ease of use. The two-device brewhouse consists of a mash/spice pan and a purified vat, which is also used as a hot tub. Technical description All pipes are cleaned by a circulation pumping system. a) In the mash pan, the mash is boiled, then the mash is pumped with the beer pump into the purifier pond. b) When bluish, the wort is pumped back into the mash pan. c) After bluish, the purified vat is cleaned and the sieve bottom removed. A special injection nozzle is installed on the cylinder wall at the bottom of the läuterbottich. As a result, it can also be used as a hot tub after removing the mobile screen floor. d) After boiling the hops  ...

Back-pressure turbine Manufacturer: Fa. KKK First Start-up: 2002 Operating Hours of Turbine: 30,000h Type: CFR5 G6a Power Max: 2500 kW Operational efficiency: 2200 kW Revolution number: 23000 rpm Live steam pressure: 65 bar Live steam pressure temperature: 480 oC Evaporation pressure: 1-17 bar Investments in the year 2002 Entire steam transforming station from 63 bar to 2.5 bar renewed in 2002, El. Generator Leroy Somer, el. Power 2 MW Renewed measuring Entire -, governing and control of the turbine renewed Steam turbine renewed Installed boiler efficiency: Boiler I Hard coal Steam generation: 20 t/h, 63 bar, 495 oC Boiler II Hard coal Steam generation: 13 t/h, 34 bar, 425 oC Boiler III: Combination burner for oil and gas Steam generation: 20 t/h, 17 bar, 285 oC General overhaul of the entire plant from 2002 to 2004 Steam generator renewed automatic cole-loader ...

Ventilation system York for heating and cooling. Heating 64 KW with gas burner. Cool 33 KW with 2 cooling compressors. 8,500m3/h air mend. The devices are new, never run, even folded. Request on 0043-6641838175 or info@frigocom.at

MAX. TEMP.: 1000 °C, CAPACITY: 60 TON, NO. OF BURNERS: 20,

Qty. 1 Second-hand ingot caster plantMfc.:Sistem TeknikBuilt:1/2015Stopped in 4/2015Recycling capacity:5000 Ton/annumQty. 12 Units of Pyrotek moldsDim. of aluminium ingot: 1000 x 1000 x 500 mmWeight:500 kgCharging material: Aluminium cans, profiles, sheets, motor blocks, wheels etc.Scope of supply:Aluminium shredderMagnetic separator Aluminium de-coating machine Baler Aluminium gas furnace Aluminium casting system Gas generator Mass ARUN spectrometer Air compressor, conveyors, forklift, ect.Shredder and magnetic separation conveyorMfc.:YSSType:Mono shaft shredder J600Capacity:500 kg per hour high power electrical shredding machineMono shaft shredder stylePLC automatic control unit Siemens?Hydraulic unit for material pushing to shredding wheelCurrent control for shredder reverse †safe usageShredded aluminium pass onto conveyor unitMagnetic separation system for steel removalElec ...

Cutting cutter Kjellberg-Eberle - used Type: SII20 Machine No.: 1331 - 220 V, 50 Hz, 2.5 kVA, IP 31 - on 04.02.1990 a new control system (NS 3003) was installed by Etek - Built in 1974 - 4 burners - Table dimensions: 6m x 2.50m - Total area: 6m x 5.5m x 2.4m In good condition!

Gas-fired recirculation chamber furnace max. temperature: 300°C external dimensions ( d x w x h): 2500 x 5300 x 8300 mm internal dimensions ( d x w x h): 1500 x 3800 x 3000 mm control zones: 2 burners power: 4 x 90 kW fans power: 2 x 4 kW

Make : Wolf Built: 1995 Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 7 pcs recessed luminaires with 4 x 58 W each Entrance side: 2-leaf gate 2.4 m x 2.8 m (approx. WxH), glazed Escape door: 0.65 m x 2.8 m (approx. WxH), 2 pieces right and left Roller door: 6.0 x 2.5 m (approx. WxH), between painting cabin and dryer Rusting : Full-surface rusting 5x13 pcs. 790x495 mm Transverse travel unit: 8 pcs trolleys Heating unit: 267 kW Burner : Gas burner Dry temperature: 80 degrees C Supply air unit: 22,800 m3/h; 7.5 kW; 960 rpm, V-belt Exhaust unit: 22,500 m3/h; 7.5 kW; 960 rpm, V-belt Pipes : supply and exhaust air pipes, deflector hood, etc. Electrics : Control cabinet Drying cabin: Dimensions: 4.0 m x 7.0 m x 2.9 m (approx. WxLxH) Supply ceiling : Filter blanket Lamps: 1 pc. recessed lamp with 4 x 58 W each Entrance side: 2-le ...

generally refurbished and modified; for roasting batches between 10 and 25 kg of green coffee; roasting time between 10 and 22 min.; heating with natural gas or propane including cooling filter, roasting cyclone with fan, new burner and new manual control with digital temperature display paint according to customer requirements extension with raw coffee supply and flue gas cleaning according to customer request

PicoPac VM405 shell seal device for Assietten menu trays incl. heat tunnel NHG801 Sealers with two-hand control Operating the device without guard sewn-on prevents safety device on the protective cover of the press Allows remove fast and tool-less quick change facility of the pressing frame of all parts to clean the device E.g. Heating tunnel is equipped with propane gas burner (supplied with pressure reducer, but without gas cylinder) Burner has a pilot flame burner with brief interruptions to, turn back completely, and then again turn on without again having to light Adjustable chain belt speed Heating tunnel is height-adjustable and suitable for the connection to other devices Both devices must be cleaned thoroughly before operating, because dirty

generally refurbished; for roasting batches between 8 and 15 kg of green coffee and roasting time between 10 and 20 min.; heating according to customer requirements with natural gas or propane including cooling tray, new roasting cyclone, new burner and manual control with three digital temperature dislays paint according to customer requirements extension with raw coffee supply and flue gas cleaning according to customer request

CNC plasma and cutting machine SATO SATRONIK FB 2000 2,000 x 4,400 mm plasma system Kjellberg HiFocus 100, (up to 25 mm quality cut), cutting max. 40 mm, 12 mm laser cutting quality, plasma burner PerCut 170 (quick change system), THC / automatic capacitive. Hoehenregulation with Kemper suction firing table 1.5 ( 2m) x 4.0 m and suction and filter unit Price: VB The plant is located at the Bochum plant Alternative plasma cutting plant Kjellberg FineFocus 800: plasma cutting system for attachment/re-training of CNC plasma cutting systems FineFocus 800 Plus Materialstaerke: up to 80 mm, Hole cutting and quality cutting up to 45 - 50 mm, gas console type PGE 3-800 (Kjellberg) - Description of the plasma cutting source (see appendix) Year of construction: Dec. 2005 (commissioning 2006) Condition as new (new price of the plant 46,327.70 EUR) Price option with gas console, mac ...

Mobile double drum dryer with many setting possibilities. Can be used in a 20 ' container be fitted and used as mobile plant. Wolf heating unit WLE-S can be converted at any time also to gas operation 140KW, oil burner Elko Kloeckner, type EK 02. Fan unit with 12,000 m³/h, 5,5KW, 955 1/min drying temperature up to 220 ° C depending on the drying goods. With heavy dust separator and air filter. Air to air heat exchanger for indirect heating - no exhaust in the drying air!

Description: plasma cutting system possible welding processes: plasma cutting with standard gases plasma cutting with oxygen (fine cutting technique) -autogen-burning cutting cutting speed: per sheet metal base up to 8m/min cutting length (x-axis):4300mm cutting width (y-axis):2100mm cutting thickness for plasma cutting: -for stainless steel=max.130mm;for normal steel (liquid steel)=max.40mm -for light metals/ Alloys=max.150mm burner adjustment distance: 250mm Plasma power source: 1. Nertajet 320-640 (2x parallel) Insulation class H; Protection class IP 23; 30Hz 2. Nertajet 120H-Autonom Road dimensions: 6400x400x550mm cutting table Ground: 4500x2600x670mm Equipment: Smoke extraction via suction table Smoke disposal by filter system Cooling of Et Scheid IK-V 18 Plasma cutting torch Autogen cutting torch roadway (rail) length 6400mm cutting table length 4500mm To ...

Make : Wolf Built: 1993 Dimensions: 1.3 m x 1.0 m x 2.6 m (approx. WxLxH) Heating unit: 140 kW Burner : Gas burner Dry temperature: max. 80 degrees C Circulating air unit: 12,000 m3/h; 5.5 kW; 1100 rpm Sales price: € 2,950,- net, from stock Herzogenaurach We have complete painting booths, drying booths and spare parts for painting systems in stock, e.g. Aggregates, lights, filter ceilings, entrance gates, roller doors, gratings, air ducts, etc. Please ask.

Plasma cutting system with possible welding processes: plasma cutting, firing joints; TIG (TIG) on all metals and alloys; MIG on light metals and alloys and heavy metals and arc welding Source: Nertajet HP 120 (220V,24V,380V,415V,440V,500V) Multiple frequencies 50/60Hz burner: CPM 250 (flat electrode) cutting process under water Plasma cutting cutting speed approx. 8m/min. Marking via compressed air driven drills Equipment: rails; Control cabinet; Cutting portal; Tub; Burning pads; 1x Torch Machine dimensions: cutting system: L:4,40xB:2,30xH:1,80m Cutting tables: L:8,44xB:3,31xH:0,85m 2 pcs. Plasma generator connected in parallel Nertajet HP 120: L:0,83xB:0,65xH:1.3 3m Track 1: L:10,650xB:0,25xH:0,92m Left Side Track 2: L:10,650xB:0.25xH:0.57m Right Side Factory conditions:L:3,120xB:1,36xH:0,14m (5 pcs. for cutting table) Water tank: D=1100mm H=2000mm / 1 pc. storage pl ...

CNC-controlled flatbed cutting machine Satronik DS 2500 double-sided. synchronized rack-and-pinion pinion drive in laeng axle game-free timing belt drive in transverse axis, drive system with 3 drive motors working width: 2500 mm Total width: 4000 mm feed: 0 -12000 mm/min 1 x Autogen 1 x Plasma (option) CNC 801 CNC web control CNC 801 - driving control unit/user interface SATO PLC - 80486 Simple and over-the-top menu for programming control panel with large-scale touch switches for all machine functions CPU 80486 DX4 32 Bite CPU/75MHz 10.4 LCD screen Essi format (ISO 6582) Floppy drive 3.5, 1.44 MB (default) 2 pcs. Interfaces V 24 (RS 232C) Flash memory for operating system and 512K for user programs 4 MB memory function list (excerpt) 54 Standard shapes Graphically underscored part programming Programmable cutting joint display of the plate sizesize plate r ...