burkhardt weber used for sale

Height=1.68 m, Overall length= 2.27 m, Overall width= 1.48 m, Net weight= 936 kg,

Height=2.08 m, Overall length= 0.84 m, Overall width= 4.74 m, Net weight= 900 kg,

Weber SSM, sharpening station for slicer knives

Weber Derinder ASC 460, function tested

WE sharp 7000, sharpening station for slicer knives, demo machine from exhibition

Weber Waagenbau u. Wägeelektronik, Automatic scale for weighing, year of construction 1989, with Weber control Dialog 165V-SWA, year of construction 2001, max. 2.5 kg, used, Can be viewed on site beforehand,

Brand Hans Weber Maschinenfabrik GmbH Type DS 8.7 Serial number DS 85 777 Type Screw Double screw Year of manufacturing 1989 Working hours 24.048 H Screw diameter 87 mm Be Ujvuzqzed Dvycelp Connection Load 90 kW

Werkend uit productie, heeft altijd gelopen met een 800 mm extrusiekop voor het produceren van HDPE buizen. Bwj Uswr Db Nod Dvycjw

• One pair of original WEBER screws (excellent state, including measurement report • One pair of non-original screws Be Udowaxuae Dvycsww • Gearbox inspected and partially revised by WEBER • Control upgraded to WPS-control • Output on PVC around 700 kg/hour

General SKU397W1236 LocationBarneveld MakeWeber Sizes Screw diameter35 mm Main Features Motor18 KW Inlet diameter50 mm L/D20 Specified Features - Double screw extruder Double screw extrudercheck Number of hours50927 Screw diameter35 L/D20 Counter rotatingcheck With vacuum pump0,75 kW, 8 m3/h, 2850 rpm Number of heating zones:1 Electric heatingcheck AC-motor18 kW, 220/380 volt Number of temperature controllers:7 Used onPVC Capacity30 kg/h General TypeCE-03 Mach.No.CE 3061 Year of construction1985 With switchgearcheck Sizes switchgear0,75x0,37x1,10 m Floorspace1,70x0,90 m Total height1,50 m Weight700 kgPowdered foodsAgrochemicalsPlastic & polymersCosmeticsAnimal feedOther feedDouble screw extrudersWeberIndustries > Food & Feed > Powdered foodsIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Chemical > CosmeticsIndus ...

The weber ultrasonic saphir digital is used for automated inline ultrasonic welding. This device is sold without the automation line. Frequency 35kHz, Power 1000W, 230V AC, Sonotrode TR35Ti The machine was used for the production of about 90000 units.

We offer this used Weber Ultrasonics Saphir Digital Manual Station Ultrasonic Welding Machine, built in 2023. About 92500 units were produced with this machine. Sonotrode TR35Ti Frequency: 35kHz Power: 1000W 230V AC Displacement measuring system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or need more information, please feel free to send us a message or give us a call.

The weber ultrasonic saphir digital station is used for ultrasonic welding. The system is sold with a machine table and workpiece holder as shown in the pictures. Frequency 35kHz, Power 1000W, 230V AC (Schuko plug), Sonotrode TR35Ti, Min force 30N, Max force 380N The touch panel has a small defect, but the use is not affected.

Key data: 1350 mm, 3 , 120 mm

Weber LCE 2000 wide belt sanding machine with lift table loading ex site for sale.

A complete cheese cutting and portioning line with one slicer, one scale and conveyor units is available. Products: meat/cheese/sausage/vegan products, slice thickness range: 0.1mm-5mm, max. product length: 1200mm, max. cutting width: 360mm, blade type: circular blade, blade diameter: 460mm, cutting angle: 22°, max. weighing capacity: 100weighings/min, machine dimensions X/Y/Z: approx. 2500mm/1600mm/2300mm, weight: approx. 2000kg. Documentation available. An on-site inspection is possible.

Manufacturer: WEBER Type: MSG 460 Power: 0.18 kW Power supply: 400 V/50 Hz Weight: 120 kg Dimensions: Depth 600 x Width 540 x Height 760 mm A special device for precise sharpening of knives. The MSG 460 type is designed to ensure high sharpening quality and suitable blade geometry, which is necessary when processing meat, cheese and other foods where maximum cutting precision is required. Blade diameter range: 420–460 mm Sharpening angle adjustment: 15°-35° Request a quote iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala VAT number: PL547-17-47-669 tel. 0048/33 812 58 60

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -single-acting cylinder -Cylinder: Ø 100 mm -Piston rod: Ø 48 / Ø 36 mm -Pipe outer diameter: mm -Stroke: 500 mm -Total length when retracted: 570 mm -Ideal for building a hydraulic press -Number: 8 available -Price: per piece -Weight: 10.5 kg/piece

Rear axle, steering axle, forklift axle, steering cylinder, hydraulic cylinder, support cylinder, hydraulic ram, pressure ram, tilt cylinder, lifting cylinder, tie rod cylinder, tilt cylinder -Manufacturer: Weber Hydraulik, hydraulic cylinder tilt cylinder stroke 110 mm -Type: Clark 4334896 -Piston rod: Ø 35 mm / M30 -Dimensions: Ø 88 x 420 mm -Weight: 8.7 kg

Hand hydraulic pump, hand pump, hydraulic cylinder, hydraulic hand pump, high pressure pump, high pressure hand pump, hydraulic hand pump, hydraulic pump, hydraulic lifting kit -Manufacturer: Weber, hydraulic pump hand pump with cylinder -Pump: Type ERGS 40-150 -Pressure range: max. 650 bar -Cylinder: stroke 155 mm -Lifting capacity: 8 t -Hole: Ø 20 mm -Quantity: 2x set available -Price: per set -Dimensions: 740/220/H140 mm -Weight: 11.1 kg/piece

Manufacturer: Weber KSV 1350 4, Type: KLE 1300, Year: 2008, Control: Weber, Monting of the machine: Quer/längs/Quer/Quer/Bürste, Sanding width mm: 1300, Sanding hight mm: 150, Number of sanding belts: 5, Sanding belt dimensions: 1370 X 2620/5100 X 150, Konstantentisch: yes, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Transverse sanding units: 3, Längsschleifaggregate: 1, Bürstenaggregate: 1, Rubber roller: no, Bürstenaggregate: 1, Band 1 Leistung kW : 15, Belt 1 shoe unit: yes, Band 1 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 2 Leistung kW : 21, Belt 2 shoe unit: CBF Aggregat, Band 2 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 3 Leistung kW : 15, Band 3 Schuhaggregat: yes, Band 3 Queraggregat: yes, Band 3 Schleifbandgeschwindigkeit m/s : 2-20 frequenzgegelt, Band 4 Leistung kW : 15, Band 4 Queraggregat: yes, Band 4 Schleifbandgesc ...

Manufacturer: Weber, Type: OFZ-KS 2, Year: 1993, Control: Weber, Monting of the machine: Quer/lkombi-Schuh/längs, Sanding width mm: 1300, Sanding hight mm: 120, Number of sanding belts: 3, Sanding belt dimensions: 2620 X 1350/4650 X 150, Rubber roller: 1, Shore roller 1: 150 mm (gummi), Transverse sanding units: 1, Längsschleifaggregate: 2, Band 1 Leistung kW : 13/17, Band 1 Schleifbandgeschwindigkeit m/s : 11/22, Belt 2 shoe unit: Kombi, Band 2 Kombiaggregat Walze/Schuh: yes, Band 2 Leistung kW : 18,5, Band 2 Schleifbandgeschwindigkeit m/s : 2-20, Band 3 Kombiaggregat Walze/Schuh: schuh, Band 3 Leistung kW : 11, Band 3 Schleifbandgeschwindigkeit m/s : 2-20, Elektronische Tastung mm: yes, Separation of sampling in mm: 32, Frequency control of belts: 2, Combi unit roller/shoe: 1, Continous adjustable feeding speed m/min: 4-25, Intermediate sanding of lacquer: yes, Constant table hight: ...

Line is consisting of:, Weber slicer, Type: CCS904, Serial number: 7096, Year of construction: 2007, Capacity: 2000 RPM, Slice thickness: 0.5 - 50 mm, Compressed air: 10 Bar, 150 L/min., Power: 3 x 400V, 50Hz, 10 kW, Dimensions: 13400 x 1900 x 2600 mm, Including CCW904 weigher, CCR904 rocker, CCA speedloader and CCU portioning unit, Pago labeler, Type: System 516, Serial number: 212516068, Year of construction: 2012, Mettler Toledo metaldetector and checkweigher, Type: XS3, Serial number: 35000430, Year of construction: 2008, With reject, Bosch Sigpack Systems robot / cartoning line, Type: LDM + TTLi, Serial number: J-01659-LDM-042 / J-01659-TTLi-077, Viewtech optical control, Type: VT2007/010, Serial number: VT2007-DCDCL/057, With reject

Key data: 130 mm

Stock# UG6397 Used line for WPC (wood plastic composite) acoustic panels production. Line had been working on acustic panels with width 600 mm x length up to 6 m. Maximal possible width up to 900 mm. Line consist of: - Twin screw, co-rotating extruder by Weber (D) model DS 13.27. Machine has twin screws, each with diameter 130 mm. Working length LD = 27. Extruder is driven by el. motor 145 kW. Barrel has 12 heating zones, each with el. heaters 5.5 kW. Includes Transi-Tec mixing and dosing device and unused spare barrel. - Calibrating table by Techno-Plast with 4 pcs of vacuum pumps (each power 4 kW) and one blower with power 1.1 kW. - Pull-off with a saw by Techno-Plast, driven with motor 5.7 kW - Profile collection table - Vacuum pump (Busch) - ONI water cooling exchanger Line new in 2010.

Belt sander manufactured in 2010. This WEBER KSF-3-1350 features three sanding belts for high-quality fine, veneer, and high-gloss sanding. It has a constant working height of 900 mm and a continuously variable feed speed of 3-18 m/min. If you are looking to get high-quality sanding capabilities, consider the WEBER KSF-3-1350 machine we have for sale. Contact us for further details regarding this machine.

Equipment: heatable/coolable, overpressure, vacuum, manufacturer: Schleifenbaum & Weber, condition: used, volume: 49,338, vacuum: 1.0, max. overpressure: 6.0, specific gravity of the medium: 1.5, lower shelf: clapper bottom, upper shelf: clapper bottom, design: upright, stand form: feet, number of feet: 4, heating/cooling (filter bar): available, max. permissible Operating overpressure double jacket / pipe chamber / bar: 6.0, Max. permissible Operating Temperature : 200,Temperature Control Cylinder: Half Tube Coil,Temperature Control Underbody: Half Tube Coil,Diameter Inside: 2.800,Diameter Outside: 3.100,Cylindrical Height: 7.483,Total Height:

PART NUMBER 7910 SPECIFICATIONS - max workpiece width 1350mm - max workpiece height 150mm – in advance: - rubber roller, pressure roller And the aggregate (metal cylinder grooved for calibration) II aggregate (two metal rollers, smooth + sequential shoe) - rubber roller, pressure roller - cleaning brush – from below: - Introductory roller, metal - pulling tape - Outlet, slip, metal roller - pneumatic oscillation of belts on photocells - electric table lifting - 2 types of feed speed 2-14m/min - main motor 5.5/15kW - brake - grinding height potentiometer - feed motor 0.75kW - working pressure 8bar - Extraction port diameter 200mm, 120mm - dimensions l/w/h 1860x2200x1980mm - weight 1995kg ADVANTAGES – German production – unpainted – DTR documentation – used grinder, very good condition Net price: 38900 PLN Net price: 9262 EUR d ...

Description Weber – Bluhm label printing & dispensing system Leg i-Air 4050E-30-RH-2E542-RO90_312-CC from 07/2018 Basic system Legi-Air 40508-CC on K-tripod spindle Rol+Tel Gr2 incl. – vacuum shut-off – digital l/O interface – compressed air monitoring and shutdown – sensor label on stamp – label end of roll warning – 2-stage vacuum – U-arm – terminal terminal – multilingual text display – label large roll unwinding up to 450m running length – design: right / right hand – Pressure module: Zebra 2E500 # 4#-200 dpi – Applicator: rotating stroke 90" – 312mm arm length -RO90_312

Labeler Manufacturer: Weber Alpha Compact Type 150-30-LH Suitable for self-adhesive labels

Labeler Manufacturer: Weber Alpha Compact Type 150-30-LH Suitable for self-adhesive labels Label width min. 10 mm – max. 150 mm Label length min. 20 mm – max. 300 mm Label roll outside diameter 300 mm Sleeve core diameter 76 mm Including tripod can be moved

weight: 2,2 t extruder diameter: x mm : x : x Please note: The machine is dismantled and ready for loading. It is not possible to show it under power or make a video. Our offer includes already the best pictures. So we don’t have and won’t send additional pictures. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

WEBER TTS-D-300 + ECO2C ist eine Entgratmaschine für Rohre und Profile, für Präzision, hohe Genauigkeit und Zuverlässigkeit. Kapazität: Breite 300 mm, Höhe 8–100 mm; Band 2400×300 mm, 2–12 m/min. Daten: 50 Hz 3×400 V, 7 kW, Gewicht ~1300 kg, Maße 2300×2200×2250 mm. Zubehör: Staubabsaugung Sideros Eco 2. Erreicht enge Toleranzen; Einsatz in Automotive, Werkzeugbau, Luftfahrt, Medizintechnik und Uhrenindustrie. Technische Daten ohne Gewähr

Twelve machines for food and meat processing are available, including four metal detectors, two derinding machines and one weigh-price labeler, one knife holder washing machine, one separator, one slicer, one meat band saw and one checkweigher. 1) Bizerba GS weigh-price labeler, version: automatic weighing instrument for individual weighing with price printing device. 2) Itec 22560-EL knife holder washing machine, year of manufacture: 2009, conveyor speed: approx. 2.6m/min, cleaning capacity: approx. 14knife holders/min, water tank volume: approx. 270l, max. cleaning water temperature: approx. 43°C, final rinse temperature: approx. 82°C. 3) 2 × Pulsotronic M-Pulse2 InFlex65 compact metal detectors, year of manufacture: 2013, suitable for metal detection in liquid and paste-like products, free product pipe diameter: approx. 57mm. 4) Pulsotronic M-Pulse 2 InFlex 65-3 metal detector, yea ...

Weber Slicer CCS 305, built: 2019, well-maintained machine, maintenance Annually from Weber, circular knife for sausage bacon etc. and circular knife for cheese included. Very good condition - ready for use.

Weber Slicer CCS 305, built: 2019, well-maintained machine, maintenance Annually from Weber, circular knife for sausage bacon etc. and circular knife for cheese included. Very good condition - ready for use.

Belt dewarper Weber ASB 600/2, with ribbon and open use, 2 speeds, for an extra charge, the belt and the pressure wheels can be renewed, Connection 400V, dimensions LxWxH approx. 85x77x125cm, weight approx. 220kg, very good used condition, fully functional

approx. 10 pieces, labeller incl. printer – used - : Price per piece from location: Lift from above onto the boxes: now only 3.500.-€ instead of 3.950.-€ (net)! Lift from the side to the boxes: now only 2.950.-€ instead of 3.950.-€ (net)! Price for the BJ 2023 device: now only €3,950 instead of €4,950 (net)! Manufacturer: Weber Type: Legi Air 4050EG, and e.g.: 4050E CC (Gen.3- from BJ 2023) Year of Make: 2014 SN: e.g.: 50001222 Incl. column and applicator (partly from the side, partly from above) 5 devices glue the labels to the cardboard from above, 5 devices stick the labels from the side to the box Condition: good Available: from approx. Q4/2026 Location: Frankenberg camp / Saxony

approx. 11 pieces of compact label dispenser for the application of pre-printed labels, Weber, Alpha Compact – used - : Price per piece from location: now only 950.-€ instead of 2.950.-€ (net)! Manufacturer: Weber Type: Alpha Compact Year of Make: 2014 Incl. column and applicator 100 – 240VAC, Condition: good Available: from approx. Q4/2026 Location: Frankenberg camp / Saxony

Manufacturer: BURKHARDT + WEBER GmbH Model (Typ): MC 100 S0 Machine Type: CNC Horizontal Machining / Boring Center (floor-type) Country: Germany Delivery Date: July 1992 Series: MC Series (Modular Machining Centers) Travels X (Column travel): ~3,000 – 5,000 mm Y (Vertical): ~2,000 – 2,500 mm Z (Ram): ~800 – 1,200 mm W (Spindle quill): ~500 – 800 mm Spindle Diameter: 100 mm (this is what MC 100” refers to) Spindle Taper: ISO 50 / SK50 Spindle Speed: ~2,000 – 3,000 rpm Main Motor Power: ~30 – 50 kW Auction-ID: A1-51153-37

6 bags per box Auction-ID: A1-50707-388

14003659 Auction-ID: A7-51314-272

14003881 Auction-ID: A7-51314-293

4 bags per box Auction-ID: A1-50707-375

4 bags per box Auction-ID: A1-50707-374

4 bags per box Auction-ID: A1-50707-389

1978 Build/DTM 2-axle hydraulic hooklift truck – PTO – Weber Hydraulik – license plate Specifications: Vehicle brand: DIY Hooklift installation: DTM Year of construction: 1978 Date of first admission: 30-06-1978 Chassis number/VIN: JVDB1978001 Number of axles: 2 Version: hydraulic hooklift/swap loading trolley Heavy-duty steel chassis construction Tandem chassis with double wheels Tire size visible: approx. 12.00 R20 Pneumatic Brake System Features: DTM heavy duty hooklift construction Hydraulic installation PTO/PTO drive via towing vehicle Multiple air reservoirs Mechanical support leg at the front Heavy towing eye Lighting Particularities: License Plate: LGR-20-K PLEASE NOTE: this vehicle has a license plate registration. Upon collection, the vehicle must be registered with a third party on site or exported. There are additional costs associate ...