bucket machine used for sale

Max working width: 1300mm Max working thickness: 140mm Max. machining width: 1300mm Motorized feed rollers 2 brushing units

Pastec pasta machine used with pasta trays and corresponding tray trolley. The machine is equipped with 5 dies and cutters with 3 different blades. The base frame has extendable storage bars for the trays and is mobile. The lid is slightly damaged (see picture) and the potentiometer of the cutter would have to be changed, as it cannot be finely adjusted. Video of the test run available, can be sent via Whatsapp. It is a very heavy and powerful machine for professional use. In addition to the dies for spaghetti and tagliatelle as well as pasta sfoglia (dough sheets or wide dough sheet for lasagna), there is also a die for croissants or a special shape. The mixing shaft can be removed without tools and the stainless steel screw can be pulled out to the front. Machine must be thoroughly cleaned before use Video of the test run and more pictures available

SPECIFICATIONS: Machine operation with rotating bezel diameter mm: 400 Speed m/min: 40 Installed capacity Kw: 3,7 Width adjustment with pushers Accessories: - 2 roller conveyors for the input and output area - Coil holder -Claw - Stretch film cutting machine

tube diameter: 50,8 mm wall strength: 1,0 mm square edge steel: 50 x 50 x 1 mm round bar steel: 25 x 6 mm weight of the machine ca.: 46 Kg dimensions: 0,6 x 0,4 x 0,5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Travel X-axis 600mm Y-axis 400mm Z-axis 300mm U-axis ±50mm V-axis ±50mm Max. workpiece dimensions 990 x 620 x 295mm Max. table load 550Kg Max. Konik ± 21º / 100 mm Machine weight 3700Kg Machine height 2210mm Machine dimensions 2480 x 2980mm Standard Wire Diameter 0.15 to 0.3mm Max. Weight of Wire Spool (kg) 10 kg (P10) Surface quality Ra 0.35 Capacity of the water system (l) 1000 Machinery equipment Transformer Windows CE Touch Screen Controller Auto Wire Threading (AWT) SD Master Tubular Linear Actuator Collision protection X/Y/Z/U/V axles 0.1 μm linear scale resolution PC Acrylic Filter Tank Cover Standard Remote Box Water Chiller Float Gun Safety door lock 3 Filters Water Tank Design CE Conformity Configuration Clean water tank

ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine was built in 2008 in Poland. The machine is used to cut pre-programmed shapes in details having a maximum thickness of 38 mm (carbon steel) or 20 mm (aluminium and stainless steel). A powerful HYPERTHERM HyPerformance HPR 130 laser source with a power of 130 A is used for the cutting process, allowing extremely precise and accurate machining to be achieved. The plasma cutting machine has a solidly built work table with a length of 6000 mm and a width of 2500 mm, which can be extended by means of an additional control panel. The plasma cutting machine is also equipped with FASTCAM CAD/CAM software for simple and effective programming of the cut shapes, and a modern HYPERTHERM EDGE CNC controller, which allows for full control of the machine. Characteristics of the ZAKMET HYPERZAKMET 6000X2500 plasma cutting machine - working area  ...

Used spiral kneader DIOSNA, type: SP 160 D -In bakery condition- - up to 160 kg dough / approx. 100 kg flour - Condition: Good, ready for immediate use The kneader is in good used condition and is immediately ready for use. Visits and test runs are possible by arrangement.

Used dough divider KEMPER, Type: Imperator CT -In bakery condition- The machine is still being refurbished. Visits and test runs are possible by arrangement.

Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.

Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991

Control: Heidenhain TNC 355, weight: approx. 3.5t, operating hours: 24,197h, with accessories, the machine requires repairs and maintenance. An on-site inspection is possible.

Control: Heidenhain TNC 355, operating hours: 69,557h, with accessories. An on-site inspection is possible.

Electrical power: 7kW, operating voltage: 380V, frequency: 50Hz, control voltage: 220V, current: 35A, control: Heidenhain. An on-site inspection is possible.

Operating voltage: 3x 380V, frequency: 50Hz, rated current: 40A, fuse protection: 50A, control voltage: 220V, DC voltage: 215/323V, an on-site inspection is possible.

Rated voltage: 380V AC, rated power: 2.4kW, rated current: 12A, components: grinding wheelhead, workpiece headstock, internal grinding attachment, machine bed, longitudinal slide, coolant system, collection tray, pneumatic system, swiveling grinding head, grinding wheel guard, metal protective covers. An on-site inspection is possible.

Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987

Labeler, make Krones, type: Vinetta 6-3-3/180, control range: 1.700 - 4.800 bph, for 0,7/0,75 lt and 1,0 lt bottles, with 2 stations for body-, shoulder- and back label, direction: right->left, built 1985

Rated current: 14A, rated power: 5.4kW, weight: 920kg, with documentation. An on-site inspection is possible.

Supply voltage: 400V, Frequency: 50Hz, Current consumption: 60A, Power: 38kW, Auxiliary voltage: 110V AC. The system was in operation from 2012 to 2017 and is currently dismantled. The machine is in very good used condition. An on-site inspection is possible by appointment.

Number of winding stations: 36, operating voltage: 400V, current: 30A, frequency: 50Hz. Equipment: Fastflex, Digicone. Inspection possible by appointment.

End-facing slides: 7, upper chamfering slides: 3, lower chamfering slides: 3. Inspection possible by appointment.

TRUMPF TRUMATIC L 3030 – CNC laser cutting machine – built in 1999 For sale is a TRUMPF TRUMATIC L 3030 CNC flatbed laser cutting machine from 1999. Basic technical data: Manufacturer: TRUMPF Model: TRUMATIC L 3030 Year of Make: 1999 Machine Type: CNC Laser Cutting Machine Laser type: CO₂ laser Working range: 3,000 × 1,500 mm Travel Z-axis: approx. 115 mm Maximum workpiece weight: approx. 710 kg Control: Siemens Laser power: 3,800 W Operating hours: 73,392 h Other information: Machine condition: used Functionality: defective / has various error messages Accessories: automatic pallet changer, extraction and filter system, cooling, cutting heads Location: 35708 Haiger Viewing possible by prior arrangement.

Labeler, make Krones, type: Robusta 10-4-4, for ~20.000 bph, with 10 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,2 lt, 0,33 lt., 0,5 lt. and 0,7 lt. bottles, for body, shoulder and back label, with around safety casing, with Siemens S5 control, built 1997

Labeler, make Krones, type: Universella 18-8-6. with 2 glue pumps, conveyors, sets for 0,25 lt + 0,33 lt Gastro crown cap, 0,33 lt Longneck screw cap, 0,5 lt NRW brown crown cap, 0,5 lt NRW white screw cap, 0,7 lt GDB screw cap, 0,75 lt Gastro screw cap, built 1998.

For sale is a workshop-overhauled notching milling machine from the renowned manufacturer Elumatec, type AF223, built in 1998. As part of the workshop overhaul, the machine was dismantled, cleaned and reassembled. It was almost completely repainted. The bearings on the spindle and motor were replaced. The plate was professionally sanded and galvanized. Other galvanized parts were also largely re-galvanized. The following new parts have been installed: - Pneumatic cylinders - Guide rails and linear layers - Clamping cylinders and rubber buffers - Protective cover - Hinged lid - Mudguard - Protective sliders on the right and left - Protective slider on the side with brush - Lever at the stop - Lever on the front spindle - Bearings on the spindle - Protective hose - Scale on the plate - Scale at the stop - Regulator - Oiler - Small parts (bearing sleeve, spindle sl ...

Labeler, make Krones, type: Bonamatic 1.240-20-4-4, with 20 bottle dishes, 4 grippers and 4 glue pallets, adjust to 0,7 lt. bottles, with 3 aggregates, for body, shoulder and back label, as too for neck ring and foot label, with cam-bottom adjustment, with around safety casing, with Siemens S5 control, built 1990

Labeler, make Krones, type: Prontomatic 720-21-8-8-110 RM, for 0,7 lt GdB bottle, for 24.000 bph, for body-, shoulder- and back label, right -> left counter clockwise, with 2 heated glue pumps, built 1997

Labeler, make KHS, type: Innoket KL 2080/120-48, speed up to 50.000 bph, right-machine, for cold glue labelling, adjust to 0,33 lt. and 0,5 lt. Longneck-bottles as too 0,5 lt. NRW-bottles, with 2 aggregates for body-, shoulder- and back label, as too neck ring, with 48 bottle dishes, 5 gripper cylinder, 6 glue pallets, with steel glue roller, carousel-Ø: 2.080mm, pitch: 120 mm, with Siemens S7 control, built 2003

General Description CNC cordon (weld seam) cleaning machine manufactured by URBAN GmbH & Co. , model SV 530 . Designed for automatic removal of excess weld material from PVC window and door frames after welding. Suitable for integration into automated PVC window production lines. Technical Details Manufacturer: URBAN GmbH & Co. Model: SV 530 Machine type: CNC cordon cleaning machine Machine No.: 530659 Power supply: 230/400 V, 50 Hz Installed power: 3.5 kW Control voltage: 24 VDC Protection class: IP54 Original URBAN CNC operator panel Automatic profile handling table Pneumatic system with pressure gauges Cleaning enclosure Integrated conveyor system Cable chain Automatic weld seam cleaning stations Condition Good used industrial condition. The machine appears complete with CNC control console, conveyor system, cleaning stations, pneumatic equipment and sa ...

Labeler, make Krones, type: Variomatic, for 12.000 bph, adjust to 0,5 lt. and 0,75 lt. bottles, with 3 aggregates, for Body- shoulder and back label, as too with additional label dispenser for self-adhesive labels, with around safety casing, built-on control cabinet, year of origin: 1998

Labeller, make Krones, type: Universella 600-15-8-6-130, 2 aggregates for cold glue label at body, shoulder, back; Videojet dating built 1995

General Description Thermal break rolling machine manufactured by Schüco International KG , model ISOMAT 5 . Designed for rolling polyamide insulating strips into aluminium profiles to produce thermally broken window, door and curtain wall sections. Suitable for aluminium profile fabrication and façade production. Technical Details Manufacturer: Schüco International KG Model: ISOMAT 5 Machine type: Thermal break rolling machine Year: 1998 Article No.: 299563 Serial number: 792-125 Power supply: 400 V, 50 Hz Motor power: 1.1 kW Rated current: 3.0 A Multiple precision rolling stations Adjustable guide rollers Profile support/feed table Emergency stop Weight: 660 kg Condition Good used industrial condition. The machine appears complete with roller assemblies, guide rollers, feed table and safety guards installed. Original Schüco paint is present with normal cosmet ...

General Description Vertical glass washing and drying machine manufactured by Triulzi S.r.l. . Designed for automatic washing and drying of flat glass prior to insulating glass production, tempering, lamination and other architectural glass processing. Suitable for continuous industrial operation. Technical Details Manufacturer: Triulzi S.r.l. Machine type: Vertical glass washing and drying machine Maximum glass height: 3,000 mm Vertical washing and drying configuration Roller conveyor transport system High-efficiency air-knife drying system Industrial electrical control panel with operator interface Suitable for float, coated, laminated and Low-E glass Condition Good used industrial condition. The stainless-steel structure appears complete with straight panels, intact roller conveyor system and access doors. The machine remains installed in an industrial production envi ...

Siemens X-ray system type Multix / Vertix Swing with generator POLYDOROS IT/S in good condition

Projection: 610 mm Installation height: 340 mm Working height: 1015 mm Table size: 600 x 500 mm Table size additional table: 220 x 500 mm Band saw blade length: 3970 mm Cutting speed, infinitely variable: 20 - 85 / 120 - 500 m/min Band saw width: 3 - 16 mm Table tiltable, 4 directions: 15° Main engine power: 1.5 kW Connected load band welder: 2.4 kVA Weight, approx.: 700 kg Equipment: - Stepless cutting speed - Belt welding device - Band saw blade in adjustable precision guides - All-round tiltable tiltable (not applicable to machines with table feed due to design) - Belt scissors - Sanding unit - Chip brush - Eye bolt for moving the machine - Machine light . LED speed indicator - Blow-out device -CE

Eyelet machine Hang 87 F, machine number 38960, 3 eyelet heads, eyelet diameter 5.5 mm, inner diameter 5 mm, waste suction device, in good condition, immediately available

M. No.: 85039 // Model: 371 Equipment / Additional information: Ø max. 15 mm Distance between drills: 60-120 mm

bore capacity in steel (diameter): 25 mm throat: 175 mm bore stroke: 50 mm : 16 mm spindle taper: ISO 30 spindle turning speed range: 50 - 3000 U/min : 380 mm : 175 mm table surface area: 700 x 180 mm connected load frequency: 230 V max. distance between table and spindle-nose: max. 320 mm total power requirement: 0,75 kW weight of the machine ca.: 150 Kg dimensions of the machine ca.: 670 x 550 x 910 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° spindle protection. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

GeneralUniversal Milling Machine Stealth Design; Control: CELOS X with HEIDENHAIN TNC7 Working area 1Longitudinal550 mmCross450 mmVertical420 mmTechnical DataFeed rate longitudinal/transverse/vertical30000/30000/30000 mm/minRapid traverse longitudinal/transverse/vertical30/30/30 m/mininlineMASTER® spindlespeed range 20 - 15.000 min-1 SK40 suitable for BIG-PLUS® tools Drive power (100% DC) 14,5 kWDrive power (40% DC) 20,3 kWTorque (100% DC) 84 NmTorque (40% DC) 121 NmSpeed range 20 - 15000 rpmSpindle taper SK40 Tool holder DIN ISO 7388-1-A Clamping System DIN ISO 7388-3-A, AD Tool clamping for HSK-A63Tool clamping HSK-A63 according DIN 69893 (incl. adaptation working spindle and tool magazine) NC swivel rotary tableSwivel Rotary Table for simultaneous machining Clamping surface dia. 505 x 500mm / 19.9 x 19.6 in swivel range -35 to +110°, rotary axis 360° including direct measuring sys ...

GeneralCNC Turning Centre with C axis and tool drive; Control: M730BM with MAPPS IV CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations20 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/15 HP), 5,0 ...

Specifications: - Cutting length 250 mm - Cutting angle 90 ° - Cutting thickness - Normal steel up to 4 mm - Stainless steel up to 3 mm - Aluminium up to 5 mm - Stroke rate up to approx. 55 rpm - Table size W 800 x D 800 mm - Working height approx. 940 mm - Stops infinitely adjustable in length and number of degrees - Drive 400 V / 4 kW - Oil filling 50 l - E - Foot switch - Space requirement approx. W 800 x H 1250 x D 900 mm - Weight approx. 700 kg

GeneralCNC Turning Centre with C and Y axis and tool drive; Control: Control M730UM with CELOS CharacteristicsMax machining diameter356 mmMax. Turning Length510 mmSwing- Ø, max.755 mmBar diameter max.65 mmSpeed max.-5000 rpmNumber of tool stations12 Rotary tool spindle speed10000 rpmMovements X / Z260/590 mmInput precision of C-axis on Mainspindle0,001 degreeRapid feed X / Z30/30 m/minDrive power main spindle15/15/11 kWDrive power tool spindle5,5/5,5/3,7 kWDimensions (L x W x H)2,82 x 2,09 x 2,15 mWeight approx.5000 KgCELOS - ERGOline TouchCELOS - ERGOline Touch to facilitate machine operation incl. 21.5 " ERGOline Touch ® control with multi touch screens Uniform management, documentation and visualization of order, process - and machine data Networkable with CAD / CAM User friendly and p (Spindle 1) Standard spindle 15 / 11 kW, 5,000min-1(Spindle 1) Standard Spindle 15/11 kW (20/ ...

This 4-axis DMG MORI CLX 550 V4 was manufactured in 2020. It features a turning length of 1,225 mm, X-axis travel of 307.5 mm, and Z-axis travel of 1,240 mm. The machine is equipped with live tools, a spray gun, a hand wheel, and a tool setter. If you are looking to get high-quality turning capabilities, consider the DMG MORI CLX 550 V4 horizontal turning machine we have for sale. Contact us for further details.

Folding unit GUK FA 50-2 2nd station; good condition; cleaned and tested; Inlet width 500mm; 2 folded pockets; Self-control. Folding unit GUK FA 50-2 secound unit; good condition; cleaned and checked; working witdh 500mm; two pockets; Automatic control.

bore capacity in steel (diameter): 30 mm throat: 200 mm bore stroke: 70 mm : 16 mm spindle taper: MK3 spindle turning speed range: 50 - 3000 U/min : 565 mm : 220 mm table surface area: 840 x 210 mm connected load frequency: 400 V max. distance between table and spindle-nose: max. 470 mm total power requirement: 1,1 kW weight of the machine ca.: 230 Kg dimensions of the machine ca.: 0,75 x 1,05 x 1,3 m Drilling and milling machine with large table Digital display SINO 3-axis. Digital display quill stroke. 2 speed levels. Left/Right switch Pan head left/right 90° Recording MC 3 - B16. Drill chuck 3 - 16 mm. spindle protection. Machine stand. incl. tool box with various tools The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Reference Num.: 4480 Brand: Heidelberg Type: SM 52-6-P3+L Construction year: 2002 Impressions: 152 mio Available: 15.01.2027 Status: In production Location: Europa Printing units: 6 Equipment: - Lackiersystem - CP 2000 - Wendung 2:4 / 6:0 - Alcolor - Wascheinrichtung - IR Trockner

Reference Num.: 4481 Brand: Polar Type: N 92 PLUS Construction year: 2020 Available: 15.01.2027 Status: In production Location: Europa Cutting Size: 920 mm Equipment: - Programm - Lichtschranke - Lufttisch - Seitentische - Polar Rüttler - Palettenheber / Stapelheber

A Belotti 5-axis CNC gantry milling machine is offered. Travels X/Y/Z: 12000mm/3000mm/2000mm, C-axis: +/-200°, A-axis: +/-115°, milling head: Cytec, spindle power: 20kW, torque: 48Nm in S1, max. spindle speed: 24000rpm, control: Siemens 840D. Documentation available. Inspection possible by arrangement.

Hoehn machine - Cross grinding machine Sunnen ML 3500 (similar to ML5000) complete with external tank with paper filter and magnetic separator The machine is in our warehouse in Gussago BS, energized Test run possible Mimu Machine Tools Italy