129,268 used machines on RESALE, but how to find them? Machine Search
High-pressure cleaning device, high-pressure rinsing, high-pressure washer with suction device on hot-dip galvanized and painted high-quality steel frame with forklift tabs. The following models are available: Vortex Combi 800 Sewer B - 800 l sludge tank - 2750 l/min. suction capacity - Petrol engines: for sucking Honda GX390 8.8kW and for cleaning - Honda GX690 17.9kW Vortex Combi 1000 Sewer D - 1000 l sludge tank - 3600 l/min. suction capacity - Diesel engines: for sucking Yanmar L100 8.0kW and for cleaning Kohler KDW 1003 18.9kW HIGH PRESSURE PUMP 160 bar at 55 l/min. Manufacturer: COMET Model: TW Premium Cxr8gqdby HIGH-PRESSURE HOSE REELS: Type: manual hose reel Material: Stainless steel • Capacite: max. 50 m 1/2" high-pressure hose Hose: 50 m 1/2" high-pressure hose (included) LOW-PRESSURE WATER SUPPLY HOSE REEL: Type: manual hose reel Material: Stai ...
High-pressure cleaning device, high-pressure flusher, high-pressure built-in washer on hot-dip galvanized and painted high-quality steel frames with forklift flaps suitable for installation in company vehicles. PTC Moses 60/200, 75/150, 30/300, 75/210XL, 84/190XL, 102/150XL and 50/300XL similar but no evening & Fock, Karo, Leistikow, Müller, Rioned, Rockstroh, Rome, Rowo,... The following models are available: Moses 60/200 | 60l/min. at 200bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 75/150 | 75l/min. at 150bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses 30/300 | 30l/min. at 300bar | Engine: Yanmar 3TNV88C 27.5kW Stage V Moses XL 75/210 | 75l/min. at 210bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 84/190 | 84l/min. at 190bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 102/150 | 102l/min. at 150bar | Engine: Yanmar 4TNV88C 35.5kW Stage V Moses XL 50/300 | 50 ...
High pressure cleaner PTC CJ-1E similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 110 bar - Foerder quantity: 12 l/min. - Motor: Electric 4-pole 230V 2.2kW, 1400 1-min - Dimensions: 540 x 440 x 680 mm - Empty weight: approx. 40 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Stable plastic housing made of injection moulding - Practical holding device for gun with lance - Self-priming pumps with EASY-START equipment - Handle with brackets for the power cord and the high-pressure hose - Easy maintenance by simply removing the front panel - Large wheels (220 mm) for easy movement on steps and over uneven terrain - Manometer - Built-in professional relief valve - Delayed TotalStop - Pulsating system - Rotary switch - Thermal motor protection - Manual stainles ...
used, kpl. 1 year warranty, plate size 1200 x 1200 mm, 70 plates, closed outlet, 30 mm cake thickness, pressure 10/15 bar, capacity approx. 2100 liters, filter area 162m2, dimensions 7500 x 1600 x 2300 mm, weight 18,000 kg, motor hydraulics, automatic. Plate transport, with or without filter cloths
Cat.-No. 16-00129 Measurement and Weight: Total Height: 2.200 mm Total length approx. 5.720 mm Diameter approx. 1.700 mm Weight approx. 1.500 kg Operating pressure: 8 bar, Test pressure: 10,4 bar Operating pressure doubles jacket: 3 bar Wall thickness: Bottom 7 mm, Jacket 5 mm Container with torispherical. On upper bottom: 2 crane eyelets 1 flange connection NW 20 for vent Front dished bottom 1 manhole swiveling 350 x 450 mm 1 sleeve ¾” 1 flange connection NW 20 for safety fitting 1 flange connection NW 20 for level indicator 1 flange connection NW 50 for clear outlet At the bottom: 1 flange connection NW 50 as outlet Container feet are about 3% slope to drain. All prices are valid Ex-Works, excl. VAT The price is for one tank. Freight Charges: depending on dimensions and destination Delivery: from D-97753 Karlstadt-Karlburg ...
High pressure cleaner PTC CJ-2B similar but no Annovi Reverberi, Comet, Dibo, Ehrle, Frank, Kärcher, Kränzle, Nilfisk, Oertzen, Walter, Weidner ... - Operating pressure: 130 bar - Foerder quantity: 32 l/min. - Engine: Honda GX390 petrol 8.7kW - Dimensions: 1160 x 580 x 710 mm - Empty weight: approx. 80 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - Robust steel frame - Practical holding device for gun with lance - Manometer - Built-in professional relief valve - Manual stainless steel hose reel with 30 m HD hose 3/8" + 10 m HD hose 3/16" - 2 pieces 3/8" and 1 piece 1/8" F pipe cleaning nozzles Oylbt - Pistol with washing lance and flat jet nozzle The CJ-2B is a professional mobile high-pressure cleaning device that is ideal for cleaning and removing pipe blockages for pipes 40 to 200 mm. Ideal for cleaning and removing pipe blockages of house ...
used, kpl. 1 year warranty, plate size 1000 x 1000 mm, 90 plates, closed outlet, 30 mm cake thickness, pressure 15 bar, capacity approx. 2300 liters, filter area 153m2, dimensions 8500 x 1600 x 2100 mm, weight 14,000 kg hydraulics, engine, automatic. Plate transport, with or without filter cloths
Used pressure leave filter of diatomaceous earth, type Ecofilter, made by TMCI Padovan, capacity 10 m3, model TV3884.85. Tank volume 900 L, pressure 8 Bar. Temperature -10 +50°C. New 1985.
High pressure cleaner PTC Easypower XL D similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-47 l/min. - Engine: Yanmar Stage V 4-cylinder 4TNV88 diesel 53hp/39.5kW, 2800 rpm - Dimensions: 1,600 x 1,320 x 1,200 - Kerb weight: approx. 740/760 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Available as skid with anti-vibration feet or as a trolly with industrial wheels - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues The following models are available: Easy Power XL D 47/400 | 47 l/min. 400 bar Easy Power XL D 38/500 | 38 l/min. 500 bar Easy Power XL D 30/600 | 30 l/min. 600 bar Ea ...
High pressure cleaner PTC Easypower XL E similar but no Dynajet, Oertzen, Falch, Hammelmann, Woma, Uraca, Kamat, Denjet - Operating pressure: 400-1500 bar - Foerder quantity: 13-38 l/min. - Motor: IE3 Electric 63A, 3Ph-400V-50Hz 50HP/37kW, 1450 w-min or IE3 Electric 63A, 3Ph-440V-60Hz 50HP/37kW, 1750 1-min - Dimensions: 1,450 x 900 x 1,050 mm - Empty weight: approx. 450 and 550 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - Main switch, start/stop buttons, emergency stop - Operat ...
Crimping force at 12 bar: 8 to Pressure to 4 bar: 4 Table size 280 x 280 mm Height 350 mm RADIUS 160 mm Weight 350 kg W x D x H approx. 0.5 x 0.75 x 2,15 m -Stroke adjustment with fine Skallierung: 0.02 mm -Anti-rotation -pneumatic foot switch
45 To-Stoessel performance adjustable 45 mm hub adjustable 8-80 mm table size 690 x 410 mm punch mounting 50 mm unloaded 200 mm height 400 mm electric pneumat. Ortlinghaus single-disc clutch and disc brakes with auxiliary brake, Central grease lubrication system, Hohenverstellbar. Report, Wellenrissprufung, see table, UVV - 2014 - still in use ? see operating instructions, Tech.Zustand - good, ready for use
High pressure cleaner PTC Easypower L B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 200-700 bar - Foerder quantity: 13-42 l/min. - Engine: Kohler Stage V Diesel 35hp/26kW, 3400 rpm - Dimensions: 1,370 x 850 x 1,020 mm - Empty weight: approx. 260 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet dues 15° The following models are available: Easy Power L D 16/500 | 16 l/min. 500 bar Easy Power L D 23/350 | 23 l/min. 350 bar Easy Power L D 20/400 | 20 l/min. 400 bar Easy Power L D 30/280 | 30 l/m ...
Producer: INJECT STAR Type: FPW 17 Internal dimensions: Length 1620 x width 560 x height 1480 mm External dimensions: Lenght 1000 x width 500 x height 1050 mm 1 piece - not complet. Used pneumatic meat press for meat and bacon INJECT-STAR type FPW 17 with the possibility of the time setting and the automatic program - Air consumption approx. 7 bar Ask for an offer iNTER-WiBA Sp.J. ul. Krakowska 263 PL 43-305 Bielsko-Biala USt-IdNr.: PL547-17-47-669 tel. 0048/33 812 58 60 fax. 0048/33 812 58 36
High pressure cleaner PTC Easypower L E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet - Operating pressure: 400 or 500 bar - Foerder quantity: 38 or 30 l/min. - Motor: Electric 63A, 3Ph-400V-50Hz 40HP/30kW, 1450 rpm or electric 63A, 3Ph-440V-60Hz 40hp/30kW, 1750 rpm - Dimensions: 1,370 x 850 x 1,030 mm - Empty weight: approx. 280 kg - High pressure pump: HPP three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage supply (24V) and control unit with star-triangle starter and 10 m. power cable - Safety switch with thermomagnetic relay for motor protection - 4 industrial wheels - Direct water suction by self-priming pump - Stainless steel relief v ...
used
6-color R21454/14 ROTOMEC gravure machine model: Rotopak 1/S web width: max. 820 mm age: overhauled 1984 6 gravure printing units material: 50g/m² - 200 g/m² (paper /PE/ALU/PE) real diameter: max. 800 mm bale width: max. 900 mm gravure printing cylinder: circumference 440 – 800 mm Still in operation: Yes Available: sofort
Used stainless steel filter press made by Seitz, type 40/30, new 1983. Filtration area 2,88 m2. 18 plates 40/40 cm. Hand clamp. New 1983. Available 2 pcs.
High pressure cleaner PTC Easypower B similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet, Kärcher, Dibo, - Operating pressure: 500 or 700 bar - Foerder quantity: 21 or 15 l/min. - Engine: Vanguard 31 HP Stage V petrol 31hp/23kW, 3400 rpm - Dimensions: 1,000 x 820 x 850 mm - Empty weight: approx. 190 kg - High pressure pump: Comet TW 500 Premium three-plunger pump with ceramic plungers - Gearbox with 1560 1-min. pump - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with 4 pieces of industrial wheels 350mm - Electric starter - Operating hour counter - Stepless pressure valve made of stainless steel with EASY-START - Large water filter with maintenance-friendly filter cartridge - incl. 20 m high-pressure hose with stainless steel quick couplings, spray gun, lance and flat jet ...
ochdruckcleaner PTC Easypower E similar but no Dynajet, Oertzen, Falch, Woma, Kamat, Denjet , Kärcher, Dibo, ... - Operating pressure: 300-700 bar - Foerder quantity: 15-30 l/min. - Motor: Electric 32A/63A, 3Ph-400V-50Hz 20-30HP/15-22.5kW, 1450 rpm / 1750 rpm - Dimensions: 1,000 x 750 x 850 mm - Kerb weight: approx. 180/210 kg - High pressure pump: Comet three-plunger pump with ceramic plungers - High-quality frame in lacquered steel with corrosion protection - Stainless steel covers - Holding device for pistol with lance - Trolly with industrial wheels - Ergonomic handles for easier maneuverability - Industrial low-voltage power supply (24V) and control unit with star-triangle starter - Safety switch with thermomagnetic relay for motor protection - Operating hour counter - 4 industrial wheels 320 mm - Direct water suction by self-priming pump - Stainless steel relief v ...
used
Mapelli 300ton downstroke hydraulic presses with vacuum, Type T300, year 1990, 4 column type, with pneumatic front guard, fixed guards to sides and rear, main ram dia 450mm, with pull back rams, single daylight 500mm, with 600mm wide x 700mm electrically heated platens. With hydraulic power unit mounted on top. Complete with controls etc and in good condition.
Rotary vane vacuum & compressor - running dry Manufacturer: Becker Type: DVT 3.140 and DVT 3.100 Motor: 400V DS Suction power: 100 - 140m3/h Compression pressure/ vacuum: optional +-0.5bar / +-1.5 barStatus: Preliminary
To the fully automatic assembling of parts of the frame. Frame dimensions: min. 120 x 120 mm 700 x 2,200 mm 4 heating Rails for preheating the Miters (procedure with the machine automatically) We have several press in our warehouse (various years).
With the universal hand punch NPR-20 can both on the front page as also Center of the punch be punched, so may here A4 sheet at any point are processed. The punch is suitable for cutting of printed materials in the Office, in the printer or in the copy shop. With a Nutmesser can A4 sheets are grooved. The NPR-20 is suitable for all cutting work, which can be with the NPR-10 through out. A countertop if necessary Additionally facilitates the stamping work
Stock# U2347-12 Used hydraulic press for removing paste/paint from mixing can. Press consist of carbon steel supporting column with height 399 cm mounted to base with dimensions 700 mm x 700 mm. Pressing head is mounted on cart which is rised and lowered by mechanical hoist which is driven by el. motor 0.37/1.5 kW, 380 V, 50 hz and is able to work up to weight range 2000 kg. Pressing head is designed for work on mixing cans with internal diamater 1100 mm. Top of pressing head is equipped with 6 clamps for mounting it on product container. Stroke of piston about 1150 mm. Piston is poweder from hydraulic device, driven by el motor 0.55 kW. Maximal working pressure up to 150 bar. Last time used in paint industry.
Technical data: To 800Liter juice/STD (for apples) weight approx. 650 kg and 500mm power band width easy cleaning of the machine of EU funding possible state: as good as new
A roll punching press for stamping is available up to A3. The die is pulled under the roll.
The nominal gain kN 4000 Slide stroke, mm 400 Frequency Slider strokes min-1, 25 The frequency of single strokes, min-1 19 Slider travel to its lowest position, where the press develops the rated force, mm 8 The distance between table and slider in its lower position at the upper adjustment position, mm 470 Size of adjustment of distance between table and slider, mm 160 The size of the table, mm 1000x1000 The size of the slide from front to back, mm 800 Width of windows in racks mm 600 Main electric motor power, kW 37.0 Air flow, m3 / stroke 0,017 Press overall dimensions, mm left to right 3470 front to back 3140 Height above floor level, mm 5940 Weight without hydro pillow kg 32600
Technical data: Fruit 750 mm tape speed press power up to 1500 kg / hour yield to 75% bandwidth continuously adjustable incl. Incl. air compressor high pressure cleaner Condition: new
Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 4000 mm Working height: 2600 mm Number of cylinders: 6 St. weight: 2000 kg Dimensions (L/W/H): 5550x1300x3000 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Force of pressure: 150 t working width: 4300 mm clear stand width: 3600 mm stand projection: 300 mm maximum height: approx. 500/700 mm operating speed: up / down 41 - 65/10 mm / sec back gauge: 1000 mm Electr. Supply: 400 V, approx. 15 kVA kW weight: 14 t space: 4600 x 1950 x 3100 mm
Transmitting vessel with 2,000 l. gross content, inlet with pneumatic cone closure (incl. 1 spare cone), venting and outlet via pneumatic squeezing valves. Conveyor lines on the side of the building.
Working width: 3500 mm Working height: 2300 mm Number of cylinders: 4 St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Force of pressure: 75 t projection: 300 mm table size: 620 x 800 mm Durchfalloch in the table: 225 x 325 mm table adjustment: 175 mm plunger surface: 180 x 475 mm slide adjustment: 80 mm stroke adjustment: 16-140 mm stroke rate: 90 / min drive motor: 380 V, 3 kW space: 1700 x 1200 x 2500 mm weight: 3300 kg
Plywood Press, manufactured by Siempelkamp, working sizes 2500 x 1300, 10 floors
: 3000 Working height: 2500 mm : 300-800 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 3500 mm Working height: 2650 mm Number of cylinders: nach Wahl St. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Schuler PE4s 50/800 High Speed Press Manufacturer: Schuler Type: PE4s 50/800 High-speed press 61/21 600/3 Pressing force: 50 t Projection: 800 mm Stroke rate /min: 125-300 Plunger stroke: 40 mm Kohler unwinding reel 500.1 M We sell a large number of paternosters. The devices are in operation until 30.06.2021. After the purchase, there are also the documents for it From 01.07.21 the devices are ready for collection. Dismantling and transport by the buyer. Location is Hildesheim The dismantling, loading, as well as transport can alternatively be offered by us. In addition to about 50 paternosters, countless other machines are available. After purchase, the amount is due within 7 working days. Please also note our other offers. Have fun browsing and buying.
Pressing force: 40 t table size: 670 x 470 mm plunger surface: 670 x 470 mm clearance between the pillars: 620/470 mm gr. Height: 740 mm Preß speed: 20 mm / s rapid traverse: 50 mm ejector force: 3T Electr. Supply: 380 V, 9.5 kW space: 2200 x 1875 x 3000 mm weight: 2400 kg
Multi-chamber press C400 | C600 | C800 C400 (with two pressing chambers) C600 (with three pressing chambers) C800 (with four pressing chambers) Specifications: Motor 1,5kW Electronic voltage 230V/50Hz/1-F. Maximum pressing force 6.5t Working pressure 150bar Cylinder stroke 700mm Time press cycle 50s Press chamber (LxWxH) 730x600x830mm Insertion height 1060mm Insertion opening (LxW) 730x600mm package size (LxWxH) 730x600x400mm Package weight 30-40kg Binding rolls 8x6x4x Strap type (polyester) 9mm/250m Number of containers 4x3x2x Length ges. 3455m; 2615mm; 1775mm; 17775mm Width ges. 1050mm Height ges. 1955mm Weight ges. 1955mm Weight ges. 1090kg; 880kg; 670kg; 510kg Transport dimensions C400 !x container Length 1680 mm 840 mm Width 845 mm 845 mm Height 1955 mm 1060 mm Weight ges. 210 kg Multi-chamber press C400 (with two pressing chambers) C600 ( ...
Baler, press for cardboard, film paper V5 | 5t Bale size: 700 mm H (variable) × 750 mm W × 500 mm D Bale weight: 50–100 kg Pressing time: 28 seconds Pressing force: up to 5 tons Dimensions: 2015 mm H × 870 mm W × 655 mm D Filling opening: 750 mm W × 385 mm H Integrated bale ejection mechanism Weight: 340 kg Power supply: Single-phase motor with 220 V 50 Hz 1.5 kW Noise: 70 decibels E-Power DIN EN 16500 IP54 protection class PLC with automatic cycle CE Certification V5 SMALL BALER Versatile, efficient and simple operation: The V5 baler is ideal for small and medium-sized companies. Even with a small amount of material, it creates order, cleanliness and space. The setting of the pressing cycle on the V5 can be done either automatically or manually. With the help of the "Easy Tie" system, the finished bale can be tied quickly and conveniently when the door is ope ...
Stainless steel pressure vessels Double-walled Mobile Technical data: see also pictures : Inner jacket 3 bar Inside about 116 ltr. Outside CA 26 ltr. Operating temperature: inside and outside: 200 ° C
System: Mobile dewatering system on trailer Type: Chamber filter press 500 x 500 Execution: filter press Year of constr.: 2017 refurbished Number of plates: 5 + head and end plate Filter plates: PP Filter cloths: optionally available in voting on the medium Presses contents: approx. 130 dm3 Filter pressure: 15 PSI Material: product-contacting parts flange, traverses stainless steel, PP or rubberized Material: non-product-contacting parts stainless steel Pump technology: In consultation System: The system is delivered as turnkey dewatering equipment ready to plug. Visit: the systems in consultation with us in the work. Other: we deliver the equipment you used ready or refurbished adapted according to your wishes and requirements.
Used pressure leave filter, made by Padovan, type G10. -filtration surface 10 m2 -filter surface for waste liquid 0,46 m2 -24 filter plates with 745 mm diameter for liquid -6 filter plates with 330 mm diameter for cake -maximal cake thickness 22 mm, volume 216 dm3 -total chamber volume 655 L -working pressure 6 bar -nominal capacity 20.000 L/h -installed power 7,5 kW -dozing pump -rotary motor 4 kW -overall diamesions: lenght 2350 mm, width 1700mm, height 2100 mm
The CE10 series is an electrically driven high-pressure cleaner. This model is the ideal tool for general cleaning work. Built into a stainless steel frame, this robust high-pressure cleaner is easy to move and can be equipped with various accessories, such as rotor nozzles, chemical injectors and a sandblasting kit. Similar but no Dynajet, Falch, Kärcher, Oertzen, etc. Available models: ----- CE10-200 50Hz 200 bar 21 l/min. CE10-200 60Hz 200 bar 25 l/min. General Specifications: ----- Power of the drive motor: 7.5 kW (50Hz) / 9 kW (60Hz) Volts: 400V (50Hz) - 440V (60Hz) Amp: 15.1A (50Hz) - 15.6A (60Hz) Dimensions: 690 mm x 560 mm x 900 mm Weight: 70 kg Includes standard accessories.
Force of pressure: 30 to piston stroke: 150 mm table width: 185 mm passage (S): 530 mm bore (F): distance of 140 mm cylinders - table (F1): distance 150 mm cylinder - table (F2): 1030 mm cylinder movable (M): 200 mm width (A): (B depth of 800 mm): 700 mm height 1 (C): 1775 mm height 2 (D): 1805 mm weight: 162 kg
maximum number of results exceeded
please refine your search
