buc used for sale

grinding diameter: 630 mm grinding length: 3000 mm workpiece weight: 2500 kg grinding wheel diameter: 750 mm voltage: 400 V total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter: 630 mm grinding length: 4000 mm max. dia. of grinding wheel: 630 mm spindle speeds: 8 - 315 mm voltage: 380 V workpiece weight: 3000 kg total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding diameter:630 mm grinding length:3000 mm centre height:315 mm total power requirement:35 KVA weight of the machine ca.:13,3 t

grinding diameter 630 mm grinding length 4000 mm max. dia. of grinding wheel 630 mm spindle speed 8 - 315 mm voltage 380V workpiece weight 3000 kg Technical details: grinding diameter 630 mm grinding length 4000 mm max. dia. of grinding wheel 630 mm spindle speeds 8 - 315 mm voltage 380 V workpiece weight 3000 kg

LEHNHOFF 2,400 mm Excavator Bucket Trench Swivel Bucket SWA 66 Year 2012

BUC63A/3000 with NC Kavalir K51 Max. diameter 630 mm The distance between the centres is 3000 mm Max workpiece weight 2500 kg Total machine input 31 kVA Machine weight ca. 15 tons

Stainless steel work table with beech wood top, L 200 / D 79 / H 87 cm

Stainless steel work table with beech wood top, L 200, D 80, H 84 cm

Steel TFU 66V/8-6 RF with 8 buckles and 2nd Unit Age: 1993 Size: 66 x 100 cm Equipment: Roundpile Feeder 1st Unit: TFU 66V/8 with 8 buckles Perforation Shaft 2nd Unit: TFU 66.2/6 with 6 buckles Delivery SAK 66-3

Continuous Butter Making Machine - CBM, with an output of 750 kg butter per hour and an input of ± 1.500 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collection tray and can be drained off separately. If desired, the  ...

Continuous Butter Making Machine - CBM, with an output of 1.500 kg butter per hour and an input of ± 3.000 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. Product area of stainless steel. Frame of painted steel. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collecti ...

Continuous Butter Making Machine - CBM, with an output of 750 kg butter per hour and an input of ± 1.500 liter of cultured or/and sweet cream per hour (35/42% fat, pH of ± 4,8 and infeed temperature ± 8 - 13 °C). Complete electric driven. After passing the churning cylinder I, the cream is pre-churned to such a way that it can be completely churned in the churning cylinder II with a relatively low speed to butter grain at a temperature of ± 8 - 13 °C. In the churning cylinders I and II, the churning is effected by differently shaped blow bars. Churning cylinder II also has a screw-shaped discharge device which, despite the narrowed outlet diameter on the hood, safely discharges the grain to the inlet trough on the ejector. The buttermilk flows through sieves in the outer surfaces of the hood, is then collected in a collection tray and can be drained off separately. If desired, the  ...

COMPACTOR ROTATIV PENTRU CARTON, PLASTIC SI LAZI SAU CUTII DE CARTON Valpak ROTARY COMPACTOR FOR CARDBOARD, PLASTIC AND BOXES OR CARDBOARDS Valpak Brand/Marca TECHVAL Type/Model// Tip/Model VALPAK Putere/Power 4 kW Year of manufacture/an fabricatie 2003 Acustic pressure/nivel de zgomot 59 db (A) Supply voltage/alimentare 380 V triple phase Protection/protectie 16A curve D Sizes/Dimensiuni in cm Coil Weight – Al fins 140x210x280 cm (LxWxH) 1200 kg Amount in stock/pe stoc 1 pc/buc 1 sac rotund de deseu maruntit = 36 baxuri de carton necompactat 1 round bag of shredded waste = 36 containers of uncompressed cardboard 1 sac rotund de carton va avea 300/400 kg, de ladite 300 kg, plastic 200/300 kg 1 round cardboard bag will have 300/400 kg, of said boxes300 kg, plastic 200/300 kg Echipamentul standard are: Celulă fotoelectrică, sistem de debavurare automat, senzor op ...

This machine was designed and manufactured in our house. It is made entirely of stainless steel Can unstack bucket with, as well as without handle the power is 450 pieces per hour, each bucket size can be used. We remanufacture for them according to their wishes and ideas.

Sell a machine from Soft Electronic Systems Holland. It seals 10 and 5Kg buckets with fumigation and has a power of 10 Bucket the Min. Model PMS 3-6.

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

It is a lid laying station , designed and manufactured in our house. This machine puts lids on previously filled buckets and presses them firmly. This unit consists of an up-and-down station and a boom, this machine can be used universally and is manufactured according to your wishes and ideas. (the system is new)

1999, HOR. FRUIT PRESS, BUCHER, MPX-100, REFRIGERATION UNIT, BITZER, R-134A, CENTRIFUGE, VACUUM FILTER, STEAM BOILER, EVAPORATOR ETC.

Garage Schalungensanlagen Rothmund / tar we offer two complete used garage formwork The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). A. garage formwork 2 Rothmund / tar and ueberarbeitet in 2004 by LAIER 5.62 X 2.78 m length and 2.95 x 6 as a fixed size, including ancillary units with spread rungsanlage to the higher level (B). Garage formwork 1 Rothmund special machines For 6 m, 6.5 m and 7 m garages, width 2.95 m set consisting of: 1.1 Set base frame, 2.1 retractable core with extension length adjustment 3.1 rear rollers wall 4.1 front rollers wall 5.2 Longitudinal walls 6.1 Set scope bracket 7.1 Set formwork for electric gate 8.1 Set hydraulic tensioner (down, sideways) 9.1 Set hydraulic system with control panel 10.1 electrical control cabinet Shaker drive 11 incl. auxiliaries (C). 15 Pallets for precast ga ...

This is a lid laying machine made entirely of stainless steel, designed and manufactured by us. It places lids on previously filled buckets, which are then also firmly pressed. The lids are disinfected beforehand, This machine it can be used variably and is manufactured according to your ideas and wishes. (The system is new)

Fresh concrete recycling plant BIBKO RAM 20/ used manufactory: Bibko type: RAM 20 YOM: 2001 Capacity: ca. 12 m³/h system washing trough, trough length 2500 mm separating layer 0,25 mm with discharge conveyor screw (new) overhauled/reconditioned and exactly aligned - gear reconditioned (overhauled) and sealed - all bearings are new - buckets and scraper exactly aligned - 1 pcs feed hopper / used - 1 pcs agitator (wastewater) with console / used - 1 pcs control unit / used -for the full automatic control of the complete plant - 1 pcs gallows-shaped pipe/ used Facility is fully equipped, clean and primed. The final painting according to customer's request. location: South Germany available: march 2024 offer and all price are net and ex stock without guarantee and/or guarantee, mistakes and/or false representations reserve, purchasing like ...

Used line for packaging of powdery materials in plastic buckets from 2.5 kg to 10 kg. Semi-automatic line of packing and transporting the dispenser weight The line consists of: Two unloading of big bags Oblique conveyor The buffer tank Two batchers Stacking conveyor The set of the transporters with the balance cruise control, feeder lids and closing buckets, made as part of the line for packing powdery materials. The line consists of: Conveyor separator Cruising verified checkweigher Discriminator transporter odstawiaj?cym Conveyor feeder lids Crimper Stacking Conveyor Appetizer - welding machine for bags The checkweigher DWT / xx Technical data: Supply voltage - Uz = 230V Isaiah znamionowy- current = 2-5A (depending on version) Mains frequency - f = 50 Hz overcurrent - F = 10A recommended network layout -TNS Insulation class - I New 2010

• continuous feeder • Counter IZVA 342 T 1st parallel folding unit: • working width max. 67 cm • 4 buckle plates • spiral folding rollers • rear-mounted slitter shafts • noise prevention 1st cross-fold unit: • cross fold knife • slitter shaft after cross-fold • spiral folding rollers 2 nd cross fold unit: • cross fold knife left • spiral fold rollers standard accessories: • scoring, perforating and cutting devices for standard Still in operation: No Available: sofort

Technische Daten: - max Arbeitsbreite 500 mm - Kettenbreite 500 mm - max. Schnitthöhe 170 mm - min. Schnitthöhe 10 mm - min. Werkstücklänge 740 mm - max. Sägeblatt ø 505 mm - min. Sägeblatt ø 405 mm - Bohrung Sägeblatt ø 80 mm - Spindel ø 60 mm ohne Büchse - Drehzahl 2600 Upm. - Vorschub 2,5 - 24 m/min. - Motor Sägewelle 75 kW - Motor Vorschub 5,5 kW - Motor Höhenverstellung 0,75 kW - Gesamtleistung 81 kW - Spannung 400 V / 50 Hz - Digitalanzeige für Zufuhrgeschwindigkeit - schwenkbares Bedienpult in Augenhöhe - elektrisch angetriebenen Einzugswalze im Tisch mit pneumatisch getakteter Oberdruckwalze - optische Holzerkennung über Lichtschranke - elektrisch angetriebene Auszugswalze im Auslauf - schwere Rollenbahn im Ein- und Auslauf - harte chromierte Oberfläche der Transportkette - Sägebüchse mit einem Satz Flanschringe - Rückschlagsicherung - automatisches Schmiers ...

Technische Daten: - max. Schnitthöhe 200 mm - max. Arbeitsbreite 300 mm - min. Werkstücklänge 450 mm kontinuierlich - min. Werkstücklänge 635 mm einzeln - Vorschub 4 - 18 m/min. - Sägewelle ø 50 mm - Spindel ø 70 mm mit Büchse - Drehzahl 4500 Upm. - max. Sägeblatt ø 305 mm - min. Sägeblatt ø 250 mm - Motor Sägewelle oben 30 kW - Motor Sägewelle unten 37 kW - Motor Vorschub 3,0 kW - Motor Höhenverstellung obere Welle 0,37 kW - Motor Höhenverstellung untere Welle 0,37 kW - Motor Höhenverstellung Vorschubbalken 0,75 kW - Gesamtleistung 71,5 KW - Spannung 400 V / 50 Hz - Vorschubwalzen ø 140 x 35 mm - 2 x Sägebüchse mit je einem Satz Flanschringen - Rückschlagsicherung - automatisches Schmiersystem - automatischer Stern-Dreieckschalter - Absaugstutzen 2 x 150 mm - Arbeitshöhe 860 mm - Abmessungen L=295, B=1620, H=1770 mm - Gewicht 3100 kg

Inclined hoist system with electrically operated winch (7,5 kW / 36 RPM), bucket (1.000 l. net capacity), weighing frame / ground station (2.000 kg max.), 25 m rope and discharging station. Rope and SEW winch drive are new / unused. Hoist has been used with Eirich intensive mixer R(V) 18. Technical documentation is available.

Top-loading, bottom-feed air feeder with register table, 2 buckles, belt delivery compressor, movable chassis

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 550 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

Mixing system on steel construction with ring trogm (150 l. useful filling, 5.5 kW drive, 0.55 kW motorized outlet), bucket lift (1.5 kW drive, incl. winch, rope and rails) and control cabinet. Hardly used after revision, very good condition.

Description Brand Pro Froid Model Copeland Scroll ID SH4797 Status Active Year of manufacture 2010 Location Bucure?ti / Bucharest (RO) Old price: 13 500 Euro. 1. Refrigeration and Climate Circuit 1.1. Pro Froid (Franta) GC4/CCR3SH 4PCS15ZC/SC Packed air cool condensing unit: • 3 pcs. Semi-hermetic Piston Bitzer 4PCS 15.2Y compressors • 3 pcs. crankcase heater • 1 pc. Liquid receiver • 1 pc. HP and LP safety pressure switches • 3 pcs. HP safety pressure switches • 3 pcs. LP safety pressure switches • 3 pcs. electric panel boxes – IP 54 • 3 pcs. electrical engine protection devices • 3 pcs. Mounted valves on compressors • 1 pc. Automatic electric panel • 1 pc. oil management system 1.2. Electric and control panel 1.3. air cooled condenser S060 3MSC 6PH/6PL SV 1.4. Helpman / Alfa Laval coolers / ventilators / fans – 17 pcs. 1.5. Electri ...

Waster Baler BTS-MF75 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 75 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 2335 x 1040 x 720 mm Transportation height: 1800 mm Machine weigh ...

Dimensions (L, W, H): 2, 60m x 1.05 m x 2, 00 m Which parts can be printed: soft drink / glass closure / 400 parts per minute Accessories:-42 roller 100 x 100, different motifs -2 printing units with 1 pressure tool (paint bucket, 4 color tubes, 1 colour Cup holder with paint tins) -2 knife holder -approx. 10 doctor blades 0, 5 mm / 5 squeegee blade 1 mm / 2 m Blade Knife roll 0, 2 mm -1 intermediate drying -2 light barrier -various sensors

Scrap Tyre Baler The BTS-MF450hd and 550hd Special Waste Balers are ideal for compacting difficult materials such as scrap tyres, plastics like car bumpers and plastic canisters, cans, barrels and metal buckets, PET bottles, big bags and much more. The special baling presses impress with their easy operation and large filling volume. Finished bales can be easily removed from the baler with the automatic bale ejector. - Extended cylinders produce a more compact bale with up to 650 kg (material depending) - Suitable for baling scrap tyres, car bumpers, metal and plastic containers, PET-bottles, computer monitors and other heavy duty materials - Extra strong machine body - Retaining Claw system to reduce spring back - Fully automated bale ejector simplifies removal of bale - CE-certified - Quality product Made in Europe Pressing force: 50 Ton Motor: 5.5 kW 16 Amp Power s ...

Built in 1991 Size max 700 x 1,000 mm min 150 x 200 mm Buckle width min 60 mm Speed max 25-160 m / min Suction equipment continuous stream feeder counter IZVA 341 1st folding unit: 4 buckle plates rear-mounted slitter shaft 2. rear-mounted slitter shaft noise prevention 2nd folding unit: 4 buckle plates rear-mounted slitter shaft noise prevention folding 3rd unit: 2 buckle plates rear-mounted slitter shaft delivery: belt delivery

Picker SureView M2 with: Tube M-147 0.1/0.3 Bucky 18x24 and 24x30 Without radiation protection wall complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into ...

Used stainless steel blancher, type BR.11, made by Femia. New 1978. Dedicated to leafy vegetables, up to 3t/h. Possible processing of all vegetables - including cooking beetroot slices. Efficient, with new buckets - 100 pcs.

Brand Horizon Model SPF 11 ID SH5055 Status Active Price 2.100 € + VAT Year of manufacture 2005 Location Ex Works Bucharest

Waster Baler BTS-MF60 The small BTS-MF60 and BTS-MF75 Waste Balers are ideal for compacting loose cardboard, paper and film but also for pressing metal buckets, tins, cans and small drums. By compacting these recyclable materials users receive a high volume reduction up to 90%, disposal cost savings and materials can be returned into recycling cycle. - Smallest baler in BTS Waste Recycling Equipment Range - Produces small and compact bales with bale weight up to 60 kg - Ideal for locations where space and height is restricted - Suitable for compacting cardboard, film, clothes, also crushing cans and buckets - Ideal for compacting small volume of waste - CE-certified - Quality product Made in Europe Pressing force: 3.5 Ton Motor: 1.5 kW 13 Amp Power supply: 220-230 V (1 Phase) Machine size (H x W x D): 1996 x 1040 x 720 mm Transportation height: 1630 mm Machine weigh ...

Description Brand Altele Model SCHIB A-013 ID SH3200 Status Price reduced Year of manufacture 2007 Location Bucharest, Romania Broken display. Electrical sistem damaged. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul. (+40-743/177.040 ) Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervam dreptul la greseli, modificari si vanzare prealabila.

Description: This forward-looking rotor blade ensures a fast and clean implementation of compost and other bulk materials. The material is taken up like a conventional wheel loader shovel. At the dispensing point, the rotor is started by means of the automatic control. The hydraulic rear panel pushes the material evenly to the rotor in dependence on the rotor speed. The opposite rotor mills off the bucket contents, whereby it is well mixed and loosely dropped. Optimal conditions are thus created for the composting process. Clumps and compactions are reliably dissolved and a well-mixed bulk material is produced. Advantages of using the meetra rotor blade: 1. - Maximum area utilization 2. - Excellent material mixing and loosening allow shortest dwell times 3. - Maximum annual throughput, as regardless of plant length and width 4. - Composting allows for trouble-free rotting c ...

Description: heavy double grinding buck (Leipzig Iron and Steel Works) with chip container Technical data Grinding wheel permeser 400 mm Operating voltage 380 volts Drive power 4 KW Weight approx. 340 kg Dimensions (LxWxH) 1100 x 1150 x 1120 mm

- deutsche Buche - Länge 2100 mm - Tiefe 780 mm - Höhe 815 mm - Gewicht 135 kg

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Basically, other brittle material ...

Shredder, industrial shredder, 2 wave star breakers, glass shredder, rotor scissors, star mill, garbage shredder, two-shaft shredder, two-shaft shredder, shredder with filler for wheel loader used The shredder can also be used as a single position. Manufacturer: SANT'ANDREA NOVARA Type: G30/1570 Built in 2003 Speed of the fast wave: 17.7 rpm Speed of the slow wave 9.3 rpm Turning monent. 11875 Nm Engine VEM 22 kW 400/690 V Dimensions Shredder: approx. 2500 x 1000 x height approx. 400 mm with motor 1500 mm Dimensions of cutting unit approx. 1600 x 810 mm Throw-in height approx. 4.6 m Throw-in funnel approx. 3 x 2 m the drop-in funnel is closed by a percular upward opening slider approx. 2.5 x 1.5 m. Total dimensions of the steel construction: approx. 3 x 2 x 8 m In the shredder, used glass was broken for a foam glass bulking system. Originally, the recycling of fluo ...

Double grinding buck Rema with cue equipment, large collecting tray, new condition. Grinding wheel diameter 300mm, 1.8kw Special price

Horizontal vacuum bucket dryer mixer Knea dryer 7000 ltr. Used Double-walled vacuum mixer/dryer with heated wall and heated inner tube. With outlet opening, filling dome and service lid, for efficient drying, thickening of products and (contaminated) waste sludge waste. Built: 1997, is currently being regenerated Volume: 7,000 litres Temperature: 151°C Pressure / vacuum 5 bar / - 1 bar (according to pressure gauge), vacuum pump and electric boiler can be offered, as well as up to the customer-specific system Gearbox output speed: approx. 42 rpm (i = 32.8) Transmission power (1,400 rpm): 50 kW Mixer chamber: approx. 1,600 x L 4,400 mm Total dimensions: approx. 6,600 x 2,200 x 3,600 mm Changes and errors in the technical data, data and prices and intermediate sale reserved.