bt product used for sale

DESCRIPTION Beck Packers Series Packer S1750 X Fully automatic film packaging machine for four-sided product shrink-wrapping Fully automatic, belt feeding with light barrier control Functioning: The beck series packer works fully automatically with photoelectric product scanning. The goods to be packed are introduced by means of a conveyor belt into the cross weld seam and Shrink-wrapped there in cycles on 4 sides. The film rolls are mounted above and below the conveyor belt. For the production of skin-tight shrink packs, the packaging machine can be equipped with the proven energy saving beck thermal shrink can be extended to a complete film packaging line. Specifications: Standard operating page: right Welding punch width: 550 mm Punch closure: servo-motor Welding system: permanently heated Passage height: 100 mm Belt width inlet: 140mm Belt width spout: 1 ...

Complete set swing gate operator, for 2-leaf swing gates CAME AXO3024/2 Product no.: 001U7312 consisting of:: 2x drive AX3024 1x control ZLJ24 1x RF module AF43S 1x antenna 309TOP-433N 1x handheld transmitter TOP-432EE 1x light barrier DELTA-E 1x key switch AP with 3 keys, Product no.: 009DES20 1x infrared light barrier DIR, Product no.: 001DIR10 4x handheld transmitter, Product no.: 001TOP-434EE 1x external radio receiver RBE4230, Product no.: 806RV-0020 with RF module AF43S miscellaneous small material New ! with documents ! Dimensions ( packaging ): 1100 x 360 x 330 mm

Length: 2700 mm Width: 1100 mm Height: 850 +- 150 mm engine output: 0,37 kW Electric capacity: 0,5 kw compressed air: 6 bar Horizontal impregnation system Pro flow for individual parts with rinsing circuit. --------------------------------- Features: Machine for horizontal flooding of individual parts. The product will go through flooded a row of nozzles. The excess product is then removed through air jets blown off. The pump and the air nozzles are controlled automatically and only then operated when the workpiece passes through. In this way the Compressed air consumption reduced. The circulation operation ensures minimal product consumption. --------------------------------- Construction features: structure Sturdy steel frame, painted with high-strength, water-soluble products. Machine body made of heat-sealed, thick polypropylene plates. 4 independent chambers for inlet, flooding, blo ...

• cf1Automatic operation • Running direction from right to left • Product width max. 180 mm, product height max. 80 mm, product length max. 500 mm (approximate data) • Manual product insertion • Adjustable distance between product carriers • Timing with print mark control by photocell possible • Film width max. 500 mm • Film roll brake • Forming tunnel adjustable in width and height • 2 cross sealing tools with knife, 1 longitudinal sealing tool • Contactor control • Drive 400V/50Hzcf0

The equipment presented is a weighing line equipped with a weighing machine type VPV45 Duo, it is composed of the following elements: - An elevator belt type goose neck type - An oscillating feed belt - One WEIGMA multihead weigher with double head vibrating lane 2 VPV45 (two channels) - A screened enclosure, with a wicket door access - A touch keyboard to program the weigher - A remote control panel - A remote emergency stop box - A double chute goes up and down - A supply item such as tray - A step-by-step conveyor belt - An electrical cabinet - A checkout support trolley The machine was used very little. Documentation, certificate of conformity, food certification available. The weight range of the weigher is from 10 gr. to 2000 g. The scale is designed for homogeneous size products with a maximum length of 55 mm. The weigher can reach approx 25 weights per minut ...

Manufacturer: Citus Kalix Model: KX 603 Year : 2011 Type: Automatic plastic tube filler Developed to fill all types of tubes available on the market: round, elliptical, etc. Hopper lifting truck ThermoChill I recirculating coolers Formats + associated parts available (details on demand) Documentation / full technical file General information : Capacity: max 60 units / min depending on product. Max product diameter : 50 mm Min product diameter : 10 mm Max product length: 230 mm Min product length: 50 mm Max fill volume: 400 ml Min fill volume: 1 ml

Used Overhauled Aseptic Tetra Pak Filling Line 1000 ml Prisma 2003 In the food and beverage industry efficient and reliable packaging solutions are crucial for preserving the quality and extending the shelf life of products When it comes to aseptic packaging the Tetra Pak filling line is a well known and trusted name Among its offerings the Used Aseptic Tetra Pak Filling Line 1000 ml Prisma 2003 stands out as a versatile and high performance solution for filling and packaging dairy and juice products With its impressive speed container compatibility and aseptic fill type this filling line ensures optimal product integrity and customer satisfaction Overview of the Overhauled Tetra Pak Filling Line The Tetra Pak Filling Line is a well established and highly regarded packaging solution in the industry It comprises various machines that work seamlessly together to ensure efficient and hygien ...

In a highly competitive and ever evolving sector such as bottling and packaging having high quality equipment is crucial to ensuring efficiency and precision One of the bottling lines that has proven to offer these qualities is the complete Doypack pouches line with a capacity of 600 kg h In addition this machine could be described as approximately brand new as it has been used for only 1 000 hours to produce 5 million pouches With an operating speed of 600 Kg h this line is optimized for pouch containers and has a format capacity of 100g This makes it ideal for a wide range of products including dairy products juices ready to drink creams and sauces One of its distinctive features is the weight based filling type thus ensuring that each bag contains the exact amount of product The efficiency of the line is further enhanced by key components from renowned manufacturers Tetra Pak Contherm ...

Used aseptic filling line Bag in Box Alfa Laval up to 1400 bph Introduction to the System The Used aseptic filling line Bag in Box Astepo up to 1400 BPH marks a revolution in the food processing industry It s an epitome of engineering finesse designed specifically for ICE cream mix The system ensures an aseptic environment crucial for maintaining product integrity enhancing shelf life and ensuring consumer safety This filling line produces formats from 5 L up to 20 L Components and Technical Specifications At the heart of the system is the Astepo HS LA A F 1H 1 a marvel of modern manufacturing Accompanying the primary unit is a sophisticated conveyor system integral for the seamless transfer of products minimizing contamination risks and human intervention An automatic packer follows suit in the Used aseptic line exemplifying efficiency and consistency It ensures that each product meets  ...

Semi Automatic or Automatic Shrink Wrapper with welding bar New The automatic machine is very fast format changes 90 product feeding belt possibility of introducing product up to three rows with eccentric system the pusher works without air and has a motor controlled by inverter and encoder perfect to be inserted in automatic lines Production can vary according to the number of rows required Suitable for packaging individual or groups products in multiple lines in the desired format such as boxes packets of coffee trays etc Automatic and semiautomatic machines with welding bar with product feed conveyer in line set up for manual loading of the product on the belt or inserted in completely automatic lines Represent maximum simplification in bundling machine Created with a single supporting structure Suitable for packaging individual or already assembled products such as boxes trays cable  ...

General SKU308T739 LocationBarneveld MakeAllgaier Werke TypeWS-GT-0,75 No.280 Year of construction2004 Main Features MaterialStainless steel Surface0.44 m2 Specified Features - Fluid bed dryer continuous Continuous fluidbed dryercheck Surfaceapprox 0,44 m2 With fancheck With dust filtercheck Heating unit (steam)check Max. temperature300 °C MaterialStainless steel, Stainless steel 1.4301 (304) Information CEcheck With switchgearcheck (as is) Extra SpecificationsFluidized Bed Spray Granulators from Allgaier can be used to produce solid and dust-free granules from liquid starting materials such as suspensions and solutions. The remaining dust and powders can be further processed into easily soluble instant products. The machine is particularly suitable for processing urea granules, yeast, gelatin granules, and water jars. Functionality:During granulation, the solids-c ...

Used Filling Monoblock Galdi Up to 6000 BPH Introduction to Advanced Bottling Technology Initially the Galdi RG260A a high performance filling monoblock from 2010 stands as a cornerstone of modern bottling operations Having been recently overhauled it showcases unmatched efficiency and reliability Consequently achieving speeds of up to 6 000 bottles per hour this machine sets a benchmark in the industry Specifically it is engineered for Pure Pak Daimond Standard Curve B style T Bottom containers Moreover it utilizes 36mm Elocap caps demonstrating its versatility and adaptability to various packaging needs Ensuring Uncompromised Product Safety of the Filling monoblock Galdi Importantly one of the critical aspects of the Galdi RG260A is its disinfection killing rate With up to LOG5 it guarantees the highest levels of product safety This capability is especially crucial in today s market wh ...

band width: 30 mm product width: 30 - 310 mm product height: 5 - 200 mm Output max. (minute): 23 Stück - Desktop device - Easy handling - Quiet and fast - Automatic start cycle - Cycle start via push button - Quality product Made in Germany - Product width 30-310 mm - Product height 5-200 mm - Tape width 30 mm - Paper bands (70-90g) and foil bands (100-130 µm) can be used without conversion - Output up to 23 bands/minute depending on package size - Stepless adjustment of the belt tension (prevents damage to the packaged goods) - Paper loop infinitely adjustable Technical specifications: Dimensions (LxWxH): approx. 540 x 350 x 420 mm Connection values: 220 V/50 Hz Weight: about 32 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FRYMA model VME 20C lab/product development scale mixer for creams, lotions, gels, viscous and semi viscous products. Product bowl in 316 grade stainless steel 360mm dia x 360mm deep with shallow dished base, 20mm dia bottom outlet with hand operated flush filling valve fitted. Approx gross capacity 30 litres, approx working volume 20 litres. Stainless steel jacket to sides and base area rated at 3 bar w.p. Vessel rated at -1bar (FV) to 5bar w.p. Vessel has temperature probe into base and 20mm dia connection for product additive or sampling point. Main mixer has four bars with teflon scraper blades attached, combined with homogenising/colloid mill 80mm dia workhead. The product bowl is power raised/lowered with dowel location at interface; 4 x swingbolt type clamps to secure. The top cover has a vessel lightglass/light 60mm dia and 60mm dia sightglass and a 15mm dia valved inlet. Control ...

Used Bottling Line KRONES for Glass Bottles up to 20000 bph Introduction to the Bottling Line KRONES Initially the used KRONES bottling line for glass bottles is highly sought after in industrial settings due to its reliability and efficiency Comprising a range of top tier components the Complete Bottling Line KRONES ensures seamless performance effectively meeting the stringent demands of high volume production Main Components Firstly the KRONES K 131 669 filling monoblock manufactured in 2016 stands as the centerpiece of the Complete Bottling Line KRONES Capable of handling a remarkable 20000 bottles per hour it is complemented by the 1998 KRONES 472 072 depalletizer and the 2000 Gronemeyer RINSER 8983 400 4 Consequently this collective setup facilitates a smooth and uninterrupted workflow from bottle unloading to the filling process in the Complete Bottling Line KRONES Quality Control ...

Filling system for sprouted vegetables, consisting of:, - Plate conveyor belt for containers, runs through chamber filler, - Product feed hopper for feed screw, Dimensions feed hopper: L x W x H = 850 x 800 x 400 mm, - Feed screw for product, Distance between the screw flights: approx. 160 mm,, Screw diameter: approx. 320 mm, length: approx. 8000 mm, - Belt conveyor belt make Niko type 02703022, machine number 403980,, blue smooth belt: approx. 2100 mm, usable width: approx. 340 mm, Belt conveyor belt for product transfer from the feed screw to the multihead weigher, - Multihead weigher with 14 heads, corrugated stainless steel sheet, make Klinger, type CW14, opening of the weighing container approx. 140 x 130 mm, - Stainless steel platform for multi-head weigher, Dimensions: approx. 3500 x 3500 mm, plateau height approx. 3000 mm, - Chamber filler TK 12, type 381, machine number 40395/01 ...

used for filling sliced and blanched mushrooms,, consisting of:, MURZAN - pump, type MUS-10, drip tape, LEONHARDT - filling machine, type AG1 DPE 150, year 1997, with a filling station, FURUKAWA, Old - Rivers - Pre-made Bag Packing Line, Ty FVV-8-275E, takes pre-made bags from a magazine, opens them, is filled via the Leonhardt,, a slight vacuum is drawn and the pouch sealed., Functionality:, The product is pumped with the Murzan pump from a storage tank onto a drip belt., The water is fed back into the tub via hoses because it is needed for pumping., The drip belt is designed in such a way that up to 4 employees can stand on the right and left, for example to be able to carry out sorting work., The product then falls into the funnel of the Leonhardt filler. Here there is another possibility to let the residual water run off before dosing., The product is conveyed forwards via the integr ...

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

Automatic, Continuous motion Horizontal Cartoner Marchesini MA 150 Continous motion horizontal cartoner, entirely made with balcony construction, designed around three basic concepts: versatility, ergonomics and maximum efficiency in a small footprint. Because of its characteristics it is the ideal solution for packaging cosmetic and pharmaceutical products. The Model MA150, working with intermittent motion, is indicated for some product types. Main features: Balcony construction, as per GMP norms All feeding groups are located in ergonomic position, in order to make the loading easy for the operator All main drive mechanism are in oil bath, thus reducing maintenance and noise level Easy and fast changeover, entirely made from operator side Touch Screen control panel, for operator interface and machine management Self diagnosis and help functions Possibility to install an au ...

New machine 24-month warranty Benefits: + TOP value for money + robust dough divider with 2 fixed wheels for quick, easy transport of the dough divider + Stainless steel version + Cutting & punching grilles are easy to replace + Punching grille: profiled POM plastic knife, food-safe, for excellent sealing of the dough + Artisan, traditional sharing and moulding of the dough possible + pull-out bracket for the dough part tub + in the device can be accommodated max. 4 grid inserts + space-saving, finds space even in the smallest bakery + no power connection required, maintenance-free + fast spare parts supply within 1-2 business days SERIES accessories, included in the price: + 1x stainless steel grid insert (see PDF / product information) + 1x stainless steel insert with POM knife (1-fold division, see PDF / product information) for dough-gentle punching of very soft  ...

Marel’s Compact Grader is designed to fulfill the needs of smaller operators and larger ones when requiring an excess capacity to handle temporary or seasonal overflows. It consists of an infeed section, dynamic weighing and discharge with optional grading and batching processes for catch-weight and fixed-weight batching. The Compact Grader will handle many poultry products, fresh or frozen: whole grillers, front halves, saddles, butterflies, split breasts, whole legs, thighs, drums, whole wings, breast fillets, leg meat and thigh fillets. Featuring a wide belt and high throughput, it can grade product of up to 3 kilos [6.6 lbs] weight. General information; Throughput: 80 pieces per minute Product weight: 40/3000 gram Product length: 700mm Product width: 250mm with infeed conveyor.

The machine is designed to pack products individually, or in batches. OPERATION: After positioning the film on the reel unwinder and adjusting the work table according to the size of the product, the operator manually introduces the product into the film and transfers it to the welding frame. Once welding, the product is evacuated into the shrink tunnel through an ejection mat to retract the film. TECHNICAL: - Model: MATRIX - Power: 10 kW - Weight: 340 kg - Maximum height of the product: 180mm. - Height adjustable welding conveyor. - Pneumatic descent of the welding frame. - Control by push button, or pedal, or cycled operation. - Ejection mat with fixed speed of 7.6 m/min. - Metal mesh tunnel belt with variable speed from 3 to 10 m/min. - Electronic regulator-controlled pulse welding. - Welding blade in high position. - Tunnel temperature regulated by electronic th ...

Coating machine ensuring perfect and uniform coating of products. A conveyor belt transports the product, which is submerged by a 4-cascade curtain to ensure full coverage of the product. The bottom of the product is covered during passage through an immersion device. The speed of the conveyor belt can be adjusted by the frequency inverter. The correct amount of batter can be adjusted with a valve on the feed. A specially designed hygienic fan blows the excess beater over the top of the product while the excess dough at the bottom is removed by an additional scraper or bottom vent. The blowing speed is controlled by frequency inverter and can be adjusted according to the application. - Production of high-quality products and extended production runs - 4-layer curtain for full coverage - Adjustable treadmill speed via variable speed drive - The amount of batter can be adjusted wi ...

Slicer, automatic vertical sausage slicer, from the Austrian manufacturer of the highest quality S.A.M., model 371.8 I fb. Made of stainless steel and anodized aluminum. Ideal machine for slicing and automatic placement, placing the product in different formats: stacked (block), horizontal fan stacking, vertical fan stacking and round or plate type format. It has different programs to configure, space between slices, units etc. Equipment totally rebuilt, revised and guaranteed. The S.A.M. is operated through the LCD screen by icons that are self-explanatory. It is also possible to save or reuse defined cutting parameters using a 3-digit PLU. Includes blade sharpener. FEATURES: Cart accommodating the product is 500mm long x 270mm wide. Product size: round min. 50mm max. 210mm, square max. 320x210mm. 370 mm diameter stainless steel cutting blade, cutting speed ...

Machine with painted aluminum structure, equipped with Lexan protections complete with micro safety. Easy to clean and accessible. Technical data: Length mm 3750 Width mm 2700 Height mm 2080 Sliding surface height mm 700 – 1000 Weight Kg 1600 Voltage Volt 400 Frequency Hz 50 / 60 Current A 11 Mechanical speed carton / min 200 Production characteristics: Case length mm 75 – 350 Case width mm 140 – 450 Case height mm 120 – 350 Equipped with: one input product feeding belt; pneumatic product elevation group; stainless steel AISI 304S stacked product collection hopper with independent motorization; product introduction group with own motorization complete with encoder. The machine is also equipped with inclined carton magazine with a capacity of about 50 cartons; carton picking unit, with suction cup arm with independent motor complete with encoder; carton tr ...

Horizontal bagging machine Laudenberg Mod. FBM 13, equipped with a BOSCH Mod. DOS 1B dosage system for powders. Technical data: Length: mm 3250 Width: mm 2950 Height: mm 2260 Net weight: Kg 2000 Production characteristics: Conveyor length: 1740 mm Capacity: 6 sachets/min Sachet Width: 45 – 88 mm Sachet Height: 50 – 200 mm This machine allows you to dose the product that will be packaged. The construction principle of the machine is based on an auger filler which, by turning, pushes a volume of product. The film coming from the reel is pulled and formed then sealed in four side by means of the welder. The product must be dropped in portions into the preformed tube. The filled tubular bag, with the product inside, is cut and the tube closed. The machine is complete with the feeding belt.

Rental Hosokawa Alpine UPZ 100 cryogenic system (LN2) by Alpine Rentals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX Suitable for cryogenic grinding with LN2 Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system with grinding tools of choice, small feeding hopper with a dosing channel, cooling screw to feed the LN2, LN2 container, filter and barrel to collect the fines. Includes an operating panel, switch cabinet and a vacuum cleaner. LN2 to be provided on-site This small size system with an universal mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. Suitable for the cryogenic grinding with liquid nit ...

Fully refurbished Hosokawa Alpine UPZ 100 used system by Alpine Originals. Technical details Design: Non Pressure Shock Resistant (NPSR), non ATEX, not suitable for inert operation (N2) Material of construction: stainless steel Without wear protection Batch operation, for a few kilos normally (product dependent) Scope of supply 100 UPZ system in large table fitted with pins (other grinding tools of choice could be offered for an additional price), small feeding hopper with a dosing screw, filter and barrel to collect the fines, blower and piping. Includes a relay control panel. This small size system with an universall mill UPZ 100 can be used for the production of small batches as well as for R&D purposes. Thanks to the different grinding accessories it can be adapted to different tasks and target fineness. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mil ...

BATES Fully automatic valve bag filling, Thermal valve welding, 140 – 180 bags / hour (25 kg, 50 kg), food/non-food, refurbished, like new Description SPECIFICATIONS Valve bag filling, manufacturer Bates, year of construction 1992. The system is designed for the bagging of dry, fine powder in valve bags, whose valve width V = 135 mm (clear width). Since all parts in contact with the product are made of stainless steel, this system is suitable for both the food and non-food sectors. (From a purely technical point of view, ATEX is also fulfilled – but there is NO longer any guarantee for this.) Depending on the product and its characteristics, the production capacity of 25.0 kg bags is approx. 140 – 180 bags/hour. Of course, the system can also process 50.0 kg bags. The offered installation consists of several components: 1. 60FFED fully automatic filling machine  ...

Self-propelled 3-row top-lifting harvester DEWULF ZK III SE, Manufacturer: DEWULF Type ZK III SE Factory number 5913733, Year of production 2013, Engine: Deutz 238 kW, No batteries - mileage cannot be verified Visible signs of corrosion and oil leaks. Dewulf ZK lllSE is a self-propelled 3-row top lifting harvester with a spike unit and a discharge elevator (for harvesting, among others, carrots, parsley, red beet, celery). According to the information provided by the manufacturer, depending on the logistics used, it is possible to collect products from 4-5 hectares during the day, ensuring optimal conditions, resulting in a high-quality final product. After the vegetables pass through the cutting set, the product is transported further using a cross belt. There is a large spiked belt behind the conveyor belt, which ensures complete cleanliness of the product immediately after c ...

// New equipment - never been used // Technical details Manufacturer : IKA Werke GmbH Model : UTL 2000/05 Type : Inline disperser / Mill, dispersing machine high shear Rotor speed : 5800 rpm (possible variation) Max product temperature : 160?C Viscosity (max.) 5000 mPas Max permissible overpressure: 16 bar Max permissible temperature of the double jacket: 120?C Max. permissible overpressure in the jacket: 2.5 bar Max. flow rate (standard operation / product: water): approx.2500 l/h Motor power: 5.5 kW Material in contact with the product : Stainless steel 316 Barrier pressurisation system Design: https://www.osertech.eu/wp-content/uploads/2022/02/IMG_9885.jpeg Use and operation The IKA ULTRA-TURRAX UTL 2000 is a high performance single stage continuous dispersion machine (rotor/stator), used for the production of emulsions and suspensions. The UTL single-stage d ...

Used homogenizing mixer manufactured by Urliński Polska, model MZUTL 200F, YOM 2006. The homogenizer is designed to carry out technological processes of liquid substances in the cosmetics, pharmaceutical and chemical industries under vacuum or pressureless conditions. It is used to produce emulsions of various viscosities by mixing them very thoroughly and homogenizing them by heating the product during the production process. The device is made as a vacuum-tight tank with an ellipsoidal bottom, placed vertically on four legs on a supporting frame with adjustable feet to facilitate vertical positioning of the mixer. There is a comb-shaped homogenizer installed in the bottom, driven directly by an electric motor with stepless speed control by an inverter. The top cover is raised and lowered automatically using a pneumatic actuator. Technological stubs are welded into the cover fo ...

MARCHESINI HORIZONTAL CARTONING MACHINE, MODEL MA 100 Year of construction: 2011 Automatic continuous motion horizontal cartoner for last run on effervescent rigid tubes. Main features: - 130mm wide adjustable through conveyor (currently set up for product size 130mm x 145mm) - hot glue closure type with free standing Nordson ProBlue 4 unit - Siemens Simatic touch screen - pre-folded leaflet inserter (strips) - leaflet presence checking device during insertion into the carton - integrated PCE verification track and trace system (for leaflets and boxes) - cross control of the presence of product/carton/leaflet - minimum load sensors for product/carton/leaflet - mechanical overload control unit - automatic operating cycle with carton and leaflet pick-up only with the presence of the product - oil-bath main drive units - emergency stop button - fully guarded with sl ...

Sample system for capsule and tablet counting and filling. The system includes a vibration and multi channel feeder, PLC control system, dynamic scan counting, bottle/can transfer unit. - Specifications: Range of counting 20-999 pcs | counting and filling speed: max. 4000 tablets/min | final output: 50-100 bottles/cans per minute | max. product diameter: 13mm | max. product length/thickness: 6mm | typical bottles sizes: diameter 45-60mm, height 50-100mm | 380V, 1.2kW. Please note: This is a sample system only. The final specifications will vary. - Please let us know your product datails (product size and shape, required speed , working stations, etc.) to prepare a suitable quotation for you. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately fr ...

Small and compact desktop counting machine for counting tablets/pills with regular or irregular shape, capsules and solid granules in the sense of tablets similar products such as candies. Also suitable for gel and gelatin capsules: After receiving samples, we can check and, if necessary, confirm the ability to run. Filling into bottles, cans, jars. The counter is equipped with dust resistance photoelectric detection technology and multi detection and alarm control functions. The 4 tracks vibration feeding device ensures evenly feeding and no breakage of product. The structure and design of the hopper prevents jamming of the products. Control via touch screen interface, menu in English available. - Specifications: Number of vibrating tracks: 4 | capacity: max. 30 fillings/minute, depending on product, shape and quantity of the product | working range: adjustable from 2-9999 per container ...

Flowwrap machine - servo version - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. No-product-no-bag function through servo control and servo motors. - Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device and splice unit (automatic change of film roll). - Technical specifications: max. film width: 600mm | 1 rotating knife | 220V, 3.2kW | no compressed air required | max. speed of the machine in neutral: 250 cycles/min | max. bag ( ...

Flowwrap machine with double-servo-motor for packing various products and big size products. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine. The system operated by the servomotor pendulum blade allows unlimited product lengths. No empty bag packing through automatic stop in case of product absence. Machine stopping in selected position to avoid film sticking to the knife. Print mark sensor included. PID temperature control. Convenient maintenance. Failure diagnosis and clear display of failure. Suitable for packaging regular objects such as biscuits, pies, bread, instant noodles, drugs, daily appliances, industrial parts, etc. - Technical Specifications: max. film width: 880mm | 1 pendular knife | 220V, 3.6kW | max. speed of the machine in neutral: 50 cycles/min | max. bag (not produc ...

Fully refurbished Hosokawa Alpine UPZ 160 Pharma used system by Alpine Originals. The Hosokawa Alpine Ultraplex UPZ is a universal fine impact mill. It is used to grind soft dry materials. This micronizer is perfect to pulverize different coarse products down to a finer powder and within different industries where micronization might be needed, such as minerals, chemicals, food, pharma, cosmetics, recycling, etc. This grinder can be used for the pre-cut of different materials. It is able to process coarse products up to approx. 3 Mohs´ hardness by reaching medium to fine particles with end-product fineness values between d97 150 to 850 microns (µm) top size (product dependent) at the lowest possible energy consumption. The turbo mill can reach this wide final product range thanks to a variety of easily interchangeable grinding tools such as pin disc, plate beater, beater disc or p ...

Flowwrapping machine, especially to pack multipacks of normal or irregular shaped, dry products (also round or cylindric shapes). Including collection unit to collect the incoming products to multi pack units. Infeed table with automatic conveyor to bring the product to the packaging machine. Including special device to hold single products together for multi packs. Additional device in the sealing area running simultaniously with the product to keep single parts together. Precise and reliable function by using servo motors. Film feed from top. Automatic wrapping and sealing below the product. - Technical Specifications: 220V, 3,66kW | no compressed air required | max. speed of the machine in neutral: 200 cycles/min | max. product sizes: (mm) L(100-400)xW(10-40 or 40-80 or 80-150)xH(10-30 or 30-60) | maschine dimensions ca. (mm): L5000xW965xH1750 | weight (net/gross): 1000/1150kg. The ma ...

Flowwrap machine - servo version - for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, dry, large products. No-product-no-bag function through servo control and servo motors. Infeed table with automatic transport through pushers into the machine. Special guiding device to allow secure transport of product through the machine: brush belt (or similar) holds the product from the top. Film supply from the top. Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device and splice unit (automatic change of film roll). - Technical specifications: max. film width: 450mm | 1 rotating knife | 220V, 3.2kW | no compressed air required | max. speed of the machine in neutral: 250 cycles/min | max. bag (no ...

Flowwrap machine for very economic high speed OPP film packaging (clear, printed or laminated) of one or more, evenly or unregular shaped, medium/larger products. Infeed table with automatic transport through pushers into the machine. Double supply belt with product separation by servomotor. The system operated by the servomotor pendulum blade allows unlimited product lengths. Film supply from the bottom for product with low stability, with humidity or some stickiness (to be tested/confirmed). Automatic folding and sealing. Print mark sensor included. PID temperature control. Machine stopping in selected position to avoid film sticking to the knife. Optional: gas flushing device. - Technical specifications: max. film width: 350mm | 1 pendular knife | 220V, 3.6kW | no compressed air required | max. speed of the machine in neutral: 80 cycles/min | max. bag (not product) dimensions (mm): L( ...

Rheon KN-171 encrusting machine The new Cornucopia® KN-171 was designed to specialize in confectionery. Even more compact than former models, the KN-171 boasts versatility and adaptability. And the possibilities keep expanding. Flexible product weight, filling/dough ratio and length Description: Output: 1200~max. 6000 pcs./h At conveyor’s up and down mechanism: 3600 pcs./h (differs according to product weight), Capacity: max. 180 kg/h Product Length Range (cylindrical) no limitation Product Weight Range (spherical) 10~90 g Dimensions:1516x874x1360 mm. Call and make an appointment for the Machine show!

Manufacturer : Th?mis Technologies Model: 5173 TT Year: 2021 Type: UV laser marking station Application: The equipment is designed to laser mark different products with different types of materials. - Glass or plastic jars of different diameters - Coloured plastic bottles of different sizes - Coloured plastic tubes This equipment performs the following functions: - Receiving the product from a conveyor belt. - Detection of the product at the entrance of the machine. - Transition of the product to the laser. - When a bottle is detected, activation of the suction and laser marking. - Discharge of the marked product. A BOFA vacuum cleaner is placed on the side outside the cabin and connected to a nozzle near the marking area. Height: 2150 mm (with glasses) Width: 1250 mm (without screen) Length: 2530 mm (with conveyor) Equipment included: printer, control compute ...

Flowpack machine Flow-wrapping machine Manufacturer: Type: DIBIFLOW 500 Year of construction: 2022 Horizontal rotating packaging machine with spool from above Cantilevered structure in aluminum and painted steel (RAL 7035 GREY – RAL 5002 BLUE) and stainless steel housing AISI 304 stainless steel parts that come into contact with the product Adjustable support legs Side-adjustable guides Studded loading belt, length 1600 mm (standard) Pressure lugs with fast extraction in plastic material suitable for contact with food Longitudinal welding machine with two pairs of wheels Diameter 120 mm the first cold to pull the second hot for welding Single-sector turnstile welding machine with a width of 240mm Independent temperature adjustment (cross welder and longitudinal welding wheels) Electronic safety coupling on the transverse welders Tunnel / film conformer with ...

Injection mould for round plastic bucket 6.5 litres information: Weight of the mould: 480kg Guarantee: Without guarantee Dimensions of the mould (mm) (Φ, Φ1, H1): Φ=420, Φ1=500, H1=480 Current condition: Not running, can not be seen while working Availability: Immediate Delivery time : to be agreed Centering ring (mm) (Φ): 125 Product: Round plastic bucket 6.5 litres Number of cavities: 1 Information about product: Bucket catalogue number: 1VM6501 Volume (litres): 6.5 Dimensions – diameter top / diameter lid / diameter bottom (mm): Ø 230 / Ø235 / Ø 195 height (mm): 225 weight (g): 247 ±5 Lid catalogue number: 1PV0506 Weight (g): 79±2 BUCKET INSERTS: PRODUCER LOGO, PRODUCTION MONTH/YEAR, FCM – FOOD CONTACT MATERIAL LOGO, PRODUCT NUMBER LID INSERTS: PRODUCT NUMBER, TWO ADDITIONAL EMPTY INSERTS, PRODUCER LOGO INGRAVED Number to the lid of buck ...

Banderolier Busch TB 24-1; good condition; cleaned and tested; Belt width 20 and 30mm; Product width max.240mm; Product height max.200mm; suitable for paper or foil; Large roll magazine. Banding machine Busch TB 24-1; good condition; cleaned and checked; band width 20 and 30mm; product witdh max.240mm; product hight max.200mm; used for paper or foil; Big Size Magazine.

DHE DEN HOLLANDER ENGINEERING: Used direct heating system for milk, cream, liquid egg, ice cream mix, etc. by DHE Equipment for the production of milk with a longer shelf life using the gentle process The product is heated to 65°C in counterflow, heated to 130°C by steam injection in less than 1 second and then cooled down again in a very short time by evacuation. Further cooling is carried out by the incoming product in counterflow and ice water. Extraordinarily gentle on the product process - closed supply tank - speed-controlled pumps - Homogenizing machine -Heater - Infusion container - Relaxation tank - Load steam condenser -Piping - Fittings and control cabinet - Measuring, regulating, controlling, recording and safety equipment - Connections for: steam, water, electricity, etc. - All system components mounted on a base frame in floor construction and mounted in containers Ca ...

• Format range folding box (5 inch) w 15-90, h 12-70, l 50-200 mm • Output 20-120 folding boxes/min, clocked motion, the maximum speed depends on the format and product • Product infeed conveyor CAM 502 H for cylindrical products (diam. 18-67 mm, h 45-150 mm) and rectangular products (w 15-117, h 15-67, l 45-150 mm), equipped for bottles with bottle-transfer chicane and pusher in product chain • Centrally adjustable product chain • Closure double-sided offset or equilateral tuck-in flaps • Leaflet folding and inserting machine from magazine GUK FA21/4, Cartonac 91 • Code reading Argus 6012 (1x brochure, 1x folding box, 1x brochure presence in folding box) • 1 KBA-Metronic hot-stamping unit (without embossing stick), for flap insert side, retrofitted 2018 • Bad ejection • Vacuum generator • HMI/IPC touch panel Siemens Simatic TP700 Comfort, Windows CE 6.0,  ...

Table banding machine Busch TB 24-1; good condition; cleaned and tested; Belt width 20 and 30mm; Product width max.240mm; Product height max.200mm; new heating; new feed rollers; suitable for paper or foil. Table banding machine Busch TB 24-1; good condition; cleaned and checked; band width 20 and 30mm; Product witdh max.240mm; product hight max.200mm; new heater; new infeed rollers; used for paper or foil.

Nordson Pur Hotmelt Single Surface Flat Lamination Line Nordson Pur Hotmelt Tank 1300 mm It is a very little used, complete line suitable for all types of flat surface lamination. It was put up for sale due to project cancellation. -LINE FEATURES- -Plate-Plate product grouping and roll-shaped product lamination line. -25 meters / minute working speed -3 meters Product feeding conveyor - Motor-controlled surface dust suction brush -1300mm wide double chrome roller glue application unit. -PLC supported PID controlled heat and weight control with Turkish menu, -Sensor-controlled plate joining ramp to the glued surface and 3 meters speed-controlled belt conveyor. - Double row silicon & chrome roller press and brake control roller coil hanging unit. -3 meters of finished product output conveyor, -Nordson PUR Glue Tank + 3 meters hot glue hose + automatic glue filling gun Level ...