bt 40 used for sale

Working width 1050 mm Max plate thickness 4mm Cage detachable With electronic foot control Forklift at your disposal Auction-ID: A3-46142-15020

Used New Brunswick Innova 4000 Incubator Shaker (without table) Voltage: 220/240 (50/60Hz) Auction-ID: A1-50936-61

Viewing by appointment Auction-ID: A1-51065-71

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 150-400Ah possible Built in 2025 and 2026, always unused Delivery by freight forwarder possible on request. Auction-ID: A1-51195-2431

40 miscellaneous chairs + a few additional transparent chair seats. 7 KAVE HOME chairs for a discounted price of 936 euros per lot (price already discounted by -50%) Belgian high-end brand Massage chair Wheelchair 7 terrace chairs High chairs Stools etc. Auction-ID: A1-51213-48

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-50798-255

- Unused; - Condition see photos; - 3 cylinder diesel engine; - Viewing recommended; Auction-ID: A1-51200-48

Used Branson RF Ultrasonic Customizable Power Supply Power: 220 volts (AC line) Auction-ID: A1-50936-156

Extra options : Spoon adjuster , Full enclosed cabin , Heating , Non-marking tires , Joy stick control , Radio , Camera , Blue spot , LED lighting , All around lighting , Daytime running lights , Battery 2019 Auction-ID: A1-51065-5

The eZono 4000 (2014) is a portable ultrasound system manufactured by eZono AG, designed for diagnostic imaging and ultrasound-guided procedures. It features a 12.1-inch display, a lightweight design, and an integrated magnetic needle guidance system called eZGuide, which helps clinicians visualize the position and direction of a needle during procedures. The system comes with one L3-12NGS linear probe (3–12 MHz), suitable for vascular examinations, nerve visualization, thyroid and breast examinations, and musculoskeletal imaging. This specialized probe is required to use the eZGuide needle guidance system. The eZono 4000 is particularly suitable for regional anesthesia, vascular access, and other ultrasound-guided interventions. Its performance depends on the condition of the device, the probe, and the availability of the required accessories. After the auction has ended, ...

The Philips HDI 4000 is in very good used condition for its age. The ultrasound system starts properly and works perfectly. All three probes supplied have been tested on the device and are detected by the system. The probes work properly and provide a clean ultrasound image. The scope of delivery includes the probes C5-2, L12-5 and C8-4v. The device shows signs of wear and tear and slight discoloration. See pictures for the exact condition. Included Auction-ID: A1-51210-9

Model DCS50-40M16 (0-50 V / 0-40 A). ➜ Pack of 2 units Auction-ID: A1-51157-13

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-50798-65

Batch of aluminium profile, 40x40mm, 92kg total including pallet Auction-ID: A1-50936-118

40cm x 60cm (4 per pallet) Mainly 13 cm deep and 8 cm) To take away on 3 Euro pallets Auction-ID: A1-51213-38

Shredder for tractor in working condition. The photos show that a mechanical cable is broken, it will not be replaced. Auction-ID: A3-46141-4145

Used Modular Devices Skan Washer 400, Molecular Microplate Washer With connected reservoirs Auction-ID: A1-50936-254

Lots of miscellaneous bedding or bath. Duvets / Duvet covers / Sheets / Memory foam pillow / Towels / CUSHIONS Auction-ID: A1-51213-53

Roof slope 20 degrees Construction consists of: 6 intermediate trusses: 2x column I220 and 2x roof beam I220 1 end truss: 2x corner column I160, 2x roof beam I140 and 2x intermediate column I160 1 end truss: 2x corner column I160: 2x roof girder I140: 2x intermediate column U160 and 1x door beam U160 à 4 meters 5 coupling tubes 70x70x3 mm 12 bracing strips flat 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41180-4

Brand: Volvo Model/trade name: Volvo FM9 E5 Vehicle category: N3 – truck First registration: 03/10/2007 VIN/chassis number: YV2JSG0C07B475170 Belgian license plate: 1-XDN-915 Fuel: Diesel Displacement: 12,780 cc Engine power: 405 kW ≈ 551 hp Emission standard: Euro 5 Technically permissible maximum mass: 26,000 kg Belgian reference number: U52071 Last registration on this registration certificate: 27/11/2019 Auction-ID: A3-46140-5765

Plot has been tested for operation Auction-ID: A1-40164-32

Tarpaulin trailer with left and right sliding curtains Type: PSX2 Variant: C1 Version: 2000 Category: O2 Genre: trailer Bodywork: originally open platform/sidewalls, here equipped with a high structure with tarpaulin Number of axles: 2 GVW: 2,000 kg Empty weight: 600 kg Theoretical payload: 1,400 kg Maximum axle load 1: 1,000 kg Maximum axle load 2: 1,000 kg Vertical load on drawbar: 120 kg Dimensions shown: Overall length 5,790 mm, width 2,100 mm Usable dimensions for the model: approx. 4,050 × 1,780 mm Tires: 155 R13 84N Approval: e42007/46025302 First registration date: 24/08/2017 Papers: German registration documents present. Visible equipment Double axle Galvanized chassis Sidewalls High frame with red tarpaulin Side opening of the tarpaulin Jockey wheel Override brake V-shaped drawbar Recommended title for Vavato: Anssems PSX C ...

From Mitutoyo Garant and Holex etc., weight 4 kg Auction-ID: A7-51245-40

Excess stock, everything is new in the packaging. Straps: 50mm x 8m. Pliers set: side cutters, combination pliers and needle nose pliers. Socket set: 3/8\" | 10 to 19 mm Hyundai drill in case: 14.4 volts 700 rpm, battery and battery charger included. Impact drill: without charger and battery, 50 Nm Impact wrench: without battery or charger 1/2\" 20 Volt, 220Nm Lot Hyundai Power Products tools and accessories Specifications: Brand: Hyundai Product line: Hyundai Power Products Features: Rechargeable screw/drill 14.4 V, type 56112 Cordless impact drill 20 V, type 56871FF Battery impact wrench 20 V, type 56871FF Socket sets 3/8\", type 59622, sizes 10 to 19 mm Locking pliers 10\", type 59160 VDE Combination pliers 180 mm, type 59127 Pliers set 3 pcs, type 59102 Lashing strap sets 50 mm x 8 m, type 59257 Various hammers Particularities: This is a composite batc ...

Royen R/4042T 2-axle rocker trailer – 2009 – 17,600 kg – air suspension Specifications: Brand: Royen Type: R/4042T Year of construction: 2009 Chassis number: YA9ET218B09140095 Version: 2-axle rocker / platform trailer Number of axles: 2 Maximum permitted weight: 17,600 kg Maximum axle load: 8,800 kg per axle Maximum towing eye load: 1,000 kg Towing eye: 50 mm Length of load floor: approx. 7,500 mm Total length: approx. 9,150 mm Width: approx. 2,550 mm Floor height: approx. 1,050 mm Tyre Size: 265/70 R19.5 Features: 2-axle center axle trailer / rocker Flat open platform loading floor Air suspension chassis WABCO Trailer EBS 50 mm towing eye Various lashing points along both sides of the loading floor Stake holders / stake devices Front board with stanchions Tool/storage boxes under the load floor Side shield Mudguards Particularities: Belgian r ...

Plot has been tested for operation Auction-ID: A1-40164-241

Equipped with MasterCool 10. This lot has been tested for functioning. Auction-ID: A1-40164-298

Model 2026 3.5 tons 400x180 All info can be found on the last photo Due to different demos, the photos may be slightly different Auction-ID: A3-46136-5729

For sale after death First owner, always kept indoors. Starts immediately, drives, shifts and brakes as it should. New battery inserted for sale Little driven in the last 4 years, major maintenance and new tires are recommended Auction-ID: A3-46101-16201

Equipped with: air suspension seat, duo bench, BE combi (tractor and trailer), radio, tachograph, Clickstar trailer with Dhollandia tailgate, Dutch license plate, work lighting, roof spoiler, manual gearbox Auction-ID: A1-47423-1603

Plot has been tested for operation Auction-ID: A1-40164-86

Plot has been tested for operation Auction-ID: A1-40164-33

Insulated walls and roof Aluminium frames with double solar control glazing Lockable with key and knob cylinder top-hung window Lifting eyes Frame underside equipped with spoon holes and adjustable legs Internal: sanitary room with shower Toilet washbasin with mixer tap and base cabinets mirror with 3 choice lighting Fan 220 volt wall sockets with USB connection LED ceiling light 2 pieces of top-hung windows with sun protection and mosquito netting Curtains Bed box with storage space RCD Closet storage (excl. accessories) External Materials: Aluminum Composite Panel White Fluorocarbon Single Coated Aluminum Sheet Double-Layer Lightweight High Compressive Strength Internal Materials Flat button plate made of wood-plastic EO quality ecological board Transport dimensions 3950x2300x2450 mm (lxwxh) unused Auction-ID: A1-47450-1000

12~26 mm thick. 175 mm working width. Painted double black. Planks with head cracks approx. 40 cm (1 side). Packed in plastic per 50 pieces. In the photos 250 cm for illustration. Auction-ID: A1-47368-3507

All Solid Carbide, 10xD to 30xD, Partially New, Weight 2.5kg Auction-ID: A7-51245-3

Model 2026 3.5 tons 400x180 All info can be found on the last photo Due to different demos, the photos may be slightly different Auction-ID: A3-46140-5729

Plot has been tested for operation Auction-ID: A1-40164-12

Working width 130 mm. The planks shown are 250 cm for illustration. Auction-ID: A1-47368-3508

Equipped with: Mercedes-Benz, Unimog 406 / U900, first registration: 02-10-1968, chassis number: 40612110009837, mileage reading: 191.537 km, engine: 6-cylinder diesel engine, power: 84 hp, manual 4-speed gearbox with 2 groups, wheelbase: 238 cm, tank capacity: 65 litres, steel spring suspension, drum brakes, tyre size: 14.00 R20, tyre condition: approx. 90%, gross vehicle weight: 5.800 kg, empty weight: 4.800 kg, declared payload: 800 kg, crane equipment HMF 353 K2 truck-mounted crane, year of construction: 1989, equipped with hydraulic winch, front PTO, hydraulic oil connections at the front, suitable for: sweeping brush, snow blade, other hydraulically driven tools, hydraulic winch on crane, two separate pulling devices: drawbar coupling, ball coupling. Auction-ID: A1-47395-2241

Plot has been tested for operation Auction-ID: A1-40164-242

The Martz Tieflader 400 2T is a robust and practical car transporter, designed for the safe and efficient transport of passenger cars and light vehicles. Thanks to its low loading floor and well thought-out design, this trailer is ideal for both professional users and private individuals who are looking for a reliable solution for vehicle transport. Tiltable loading ramp for easy loading The Martz Tieflader 400 2T is equipped with a tiltable loading ramp that allows vehicles to be easily driven onto the trailer without complex operations. The low ramp angle makes loading vehicles with low ground clearance particularly easy. This system provides a fast, safe and efficient way to load and unload vehicles. Well thought-out and strong construction The wheels are placed on the outside of the cargo area, creating a low cargo floor and maximum stability during transport. The robust steel cons ...

Different brands: sayer, Reigter, Leitenberg, Man and Gesa. Auction-ID: A1-47450-2056

Plot has been tested for operation Auction-ID: A1-40164-13

Hub diameter 281 10-hole ET0 335 Set of 2 pieces of ban and rim, Auction-ID: A1-47395-1175

Plot has been tested for operation Auction-ID: A1-40164-240

Equipped with: new package of decking boards Auction-ID: A1-47450-2501

Stainless steel platform 12,000 x 2,400 mm Second-hand stainless steel platform designed to create a traffic, access or work area at height within an industrial, wine or agri-food site. Thanks to its generous dimensions, this platform makes it possible to create a safe passage around production equipment, tanks or machines, while facilitating control, monitoring and maintenance operations. Consisting of a piece of one piece 12 m long by 2.40 m wide. The auger formerly positioned under the platform is not included in the sale. Technical data Type: industrial platform Material: stainless steel Configuration: one-piece platform Number of elements available: 1 Usable area: 28.80 m² Use: circulation, access and work around industrial equipment Worm screws positioned under the platform: not included Dimensions Length: 12,000 mm Width: 2,400 mm Total area: 28.80 m² Number of pieces: 1 s ...

Professional DTF printer / textile printer with SER. TEC DTF LINE 400 powder machine, suitable for producing DTF transfers for textiles. Professional installation from Italian manufacturer SER. TEC S.r.l. Sistemi di Stampa – Made in Italy. The system consists of a DTF printer and powder/drying unit for printing and processing DTF film. Suitable for T-shirts, hoodies, workwear, sportswear, bags and other textile products. Specifications Type: Professional DTF textile printer + powder machine Powder machine: SER. TEC DTF LINE 400 Manufacturer: SER. TEC S.r.l. Sistemi di Stampa Origin: Made in Italy Year of construction: 2022 Serial number / Matricola: 1583 Power supply: 230 V AC Power: 1.4 kW Current: 5 A Frequency: 50 Hz Weight powder machine: approx. 80 kg Reference: 009-22 CE marking: Yes Auction-ID: A1-47450-1604

Equipped with 3 separately opening side doors and end door lock case unused Auction-ID: A1-47368-1000

Plot has been tested for operation Auction-ID: A1-40164-239