bt 40 used for sale

UNDERWATER PELLETIZER, for rigid and soft PP max MFI : 30 (and more), electrical heater max 14,6 kW, n.2 thermo regulating zones, A pressure transducer and a melt temperature transducer are mounted on the purge valve. The purge valve is controlled by a hydraulic cylinder connected to a hydraulic power unit with a 2.2 kW motor., Steel die with brazed tungsten carbide plates. A conveyor cone for the molten polymer is installed inside., stainless steel granulation chamber, Impeller shaft with 11 kW 2-pole drive motor (3000 rpm nominal, 4000 rpm max) controlled by an inverter with rpm variation and speed readout on the panel. The shaft output side has special seals and a labyrinth and safety water drainage to protect the motor bearings. The impeller motor is integral with a slide sliding on rolling guides, operated, via a recirculating ball screw, by a manual handwheel equipped with a positi ...

- Producer Cefla - Type RIB / 4000 - Year of construction 2003 - Max. part width 1300 mm - Max. part length 3.800 mm - Max. part height ~ 10 - 60 mm - Abstand der Rechen, Höhe 135 mm - Vorschubgeschwindigkeit 2 - 7,5 m/min - Length 4.100 mm - Width 1.700 mm - Height 1.800 mm - Inkl. Control - Location: on stock - Volt / HZ 400 / 50

unused radiator with fan assembly, for Perkins 4012-46TAG2A

Leutenegger (Starrag) Wash Box Technical data Bathroom capacity: approx. 0.9 m3 Chemistry: Henkel P 3 Voltage: 3x400V/230V 50 Hz Supply line: 40 A Control voltage: 24 V DC Temperature max: 50° C Electric heating Heating capacity: 3x3.25 kW = 9.75 kW Work pump: 3 kW Exhaust fan: 0.37 kW Exhaust air volume: 400 m3/h Data sheet at this link Shipping costs on request More items - new and used - can be found in our shop! International shipping costs on request

Scissor lift table, scissor lift table, scissor lift table, scissor lift, scissor lift, double scissor lift table -Drive for lifting via: 240 volt electric hydraulic pump -Payload: 400 kg -Platform: 700 x 600 mm -Height retracted: 330 mm (without wheels 210 mm) -Height extended: 1140 mm -Max. Stroke: 810 mm -Number: 1x lifting platforms available -Price: per piece -Transport dimensions: 800/600/H330 mm -Own weight: 128 kg

Adjustable geared motor, variable speed geared motor, electric motor -Manufacturer of gearbox: AEG Motor manufacturer: AEG -Motor power: 0.175 kW -Speed range: 450-4000 rpm -Motor: adjustable -Design: B3 -height of shaft axis: 80 mm -Drive shaft: Ø 14 mm -Quantity: 1 motor available Price: per piece -Dimensions: 380/200/H240 mm -Weight: 22 kg

Stacking boxes, stacking boxes, plastic boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -External dimensions: 400/300/H220 mm -Interior dimensions: 340/268/H200 mm -Quantity: 144 pieces of boxes available -Piece: 6 euros net from stock -Minimum order quantity: 5 pcs -for larger purchases: price on request -Own weight: 1.5 kg/piece

Rubber protective mats, conveyor belt, belt conveyor belt, conveyor belt rubber, rubber conveyor belt, conveyor belt, conveyor belt -Manufacturer: Forbo Siegling, Conveyor belt type E 18/3 EO/E3 MT-TT TRANSPARENT -Width: 600 mm -Length: 2500 mm -Quantity: 1 conveyor belt available -Dimensions: 400/350/H235 mm -Weight: 2.9 kg

Welding inverter, welding rectifier, electrode welding machine, electrode welding machine, electrode welding rectifier, welding machine, welding inverter -Manufacturer: Kjellberg, Electrode welding machine welding inverter type KU 412 -Welding power: max. 400 A -Welding cable with electrode clamp -ground cable -Dimensions: 560/290/H500 mm -Weight: 44 kg

Indoor crane, crane, electric wire rope hoist, hoist, motor winch, motor winch, tackle, traction winch, block and tackle -Manufacturer: steel, crane chassis with electric cable pull -Crane chassis: Type GO 24 20 16 -Traveling speed: 20 m/min -Roller pitch: 800mm -Cable: Type AS 2010 -Traction: 1000 kg / load capacity 4000 kg -Drum speed: 16 m/min / stroke 4 m/min -Lifting height: mm -Transport dimension: 1250/1180/H400 mm -Own weight: 356 kg

Flange connection, V-flange, pipe coupling, weld reducer, reducer, clasp bottom, weld reducers -Reducers: Welding reducers 245 pieces -Type: 80 different versions, see photos / parts list -Price/Sale: complete -Stock: other sizes/types also available, please inquire. -Transport dimensions: 1200/800/H410 mm -Weight: 401 kg

Gear motor, electric motor, electric gear motor -Manufacturer: Groschopp, geared motor -Gearbox: Type E 2 ai= 7 -Speed speed: approx. 400 rpm -Motor: Type WK 0341501 0.12 kW / 2800 rpm -Shaft: Ø 10 x 30 mm -Protection rating: IP44 -Total dimensions: 225/150/H115 mm -Weight: 4.4 kg

Container, grit trap, storage container, transport storage container, storage tank, transport container, settling tank for groundwater lowering -Container: Transport storage container -Capacity: 4000 liters -Inner dimensions: 2990/990/H1000 mm -Connections: see photos -Dimensions total: 3570/1150/H1150 mm -Weight: 780 kg

Transformer, transformer, converter, three-phase autotransformer, three-phase transformer, three-phase transformer, single-phase transformer, transformer, auto-transformer -Manufacturer: OCE Montecchio, Auto-Transformer Type CEI 14-6 -Power: 400 VA -Technical data: see photo type plate -Dimensions: 120/110/H125 mm -Weight: 5.8 kg

Manometer, test manometer, pressure gauge with Bourdon tube, pressure-temperature measuring technology, Bourdon tube manometer, pressure tester, pressure tester -Manufacturer: TGL, Manometer 0 - 400 bar, unused, original packaging -Type: Ø 160 mm 0-40 MPa -Quantity: 1x pressure gauge available -Cardboard dimensions: 200/200/H90 mm -Weight: 1.0 kg

Contact pressure gauge, pressure switch, pressure gauge, test pressure gauge, differential pressure switch, pressure switch, low pressure switch -Manufacturer: VDO, contact pressure gauge 0 - 400 bar -Voltage: up to 380 V -Switching capacity: 30W 50VA -Quantity: 1x pressure gauge available -Dimensions: 220/210/H140 mm -Weight: 1.8 kg

For sale is a powerful wood-burning system from the manufacturer ENDRESS, type VR-W 400, built in 2012. The system was used to generate heat from biomass (e.g. wood chips) and is ideal for heating systems in commercial, industrial or local heating networks. Technical data: • Type: ENDRESS VR-W 400 • Year of manufacture: 2012 • Power: 400 kW • Water capacity: 1,800 litres • Operating temperature (max.): 95 °C • Permissible operating overpressure: 3 bar • Boiler class: 3 • Designation according to the nameplate: wood-burning system • Fuel supply: possible via several screw conveyors with electric motors Accessories: • Exhaust gas purification unit • Membrane pressure expansion vessel \"reflex G\" • Various drive units Auction-ID: 03C-BXN-4

16x Suntech solar panel with Growatt 6 kW inverter Inverter: Growatt MOD 6000TL3-X (3-phase) power: 405 Wp Total power: 6,480 Wp Condition: new Auction-ID: A1-44832-3

Brand SEW Eurodrive Type R07 DR63L4 TF AND8 Voltage Volt 3 fase 400 volt Force KW 0,25 KW Rotational speed RPM 405 RPM Shaft size mm Units in stock 1 Length 35.00cm Width 18.00cm Height 15.00cm

Power distribution block. Input 1x Cee Form 400 Volt 32A, 5-pole, Output 2x Cee Form 400 Volt 16A, 5-pole, 1 x Cee of 400 Volt 32A, 5-pole 4x Schuko Type E, 230 Volt, 16A, 3-pole IP protection class IP44. Amperage 16A. Voltage 230 and 400 volts. CE according to IEC60309-2. Length of the supply line 1.0 m. Condition: never used / new (5) Auction-ID: A1-45681-900

Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Auction-ID: A1-45681-829

A deposit of €1500.00 is required in order to submit a bid on this lot. To receive the bank details necessary for the transfer, please contact the auction representative at alessandro.icardi@surplex.com. ATTENTION: The lot includes the following works that must be carried out in this time order no later than 30 days from the award. The total removal of the goods and correct disposal of the remaining NON-FERROUS materials after removal. The complete floor cleaning of the respective indoor and outdoor area. Access to the site will be allowed only after the delivery of all the documentation necessary for safety on site, according to the regulations in force and the specific provisions of the seller. Liability insurance is required for any damages. Surplex will monitor the progress of the work to ensure that the deadlines are met. An advance payment will be required for surveillanc ...

2 servo motors 1 engine without nameplate technical data see pictures Condition: unchecked (6) Auction-ID: A7-45761-849

Brake 2x45 Nm, mounted on AUMANN substructure Auction-ID: A1-45682-30

Belt conveyor belts 2 pieces 1x SCHOLZ KMU3500 400, S/N 206 1 1188, 1x SCHOLZ AMN 2000x385, S/N 080070401.0, electromotive, possibly cannibalized

TRICOM S 96V 40A forklift charger for Pb wet batteries

Electric stacker OM CN14 load capacity 1,400 kg built in 2007, 8,446 Bra (19.03.25), weight 930 kg without battery, battery 247 - 318 kg, 24 V, S/N F24525U00831, lifting height 4,565 mm, mast height 270 cm, internal No. 14

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45832-83

AVIA FNE 40P – Universal milling machine built in 2014 Highlights • Year of construction 2014 • Model AVIA FNE 40P • 3-axis digital display ARBAH-M • Tool holder SK 40 • Rotatable milling head • Without vertical milling unit • Closed work area • Coolant system • Machine weight approx. 2000 kg Technical data • Travel distances: 3 axes (X, Y, Z) • Table dimensions: approx. 800 x 400 mm • Max. tool diameter: 125 mm • Max. tool weight: 6 kg • Machine dimensions: approx. 2300 x 2100 x 2100 mm • Machine weight: approx. 2000 kg Equipment • Protective cover with viewing window • Control panel • Machine lighting • Emergency stop switch Auction-ID: A7-45863-1

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45832-89

Machine type: Tool & cutter grinder / Universal sharpening machine Manufacturer: Tacchella Model: 40 LR Year of manufacture: Unknown Grinding type: External / tool sharpening Machine design: Universal grinding machine with adjustable grinding head Table type: Cross-slide table with T-slots Axis movement: Manual X / Y / Z adjustment Grinding head: Swiveling grinding head for angular grinding Feed: Manual feed system Control: Manual control panel Speed selection: Multi-speed selector (visible) Power supply: 380 V / 50 Hz or 220 V / 50 Hz Condition: Used, visible wear and corrosion marks Remarks: Compact universal sharpening machine for tools, cutters and small components; suitable for workshop and maintenance applications Approx. own mass: 400 – 600 kg Approx. dimensions (LxWxH): 1000 x 800 x 1500 mm Auction-ID: A7-45364-10

Roof slope 20 degrees Construction consists of: 6 intermediate trusses: 2x column I220 and 2x roof beam I220 1 end truss: 2x corner column I160, 2x roof beam I140 and 2x intermediate column I160 1 end truss: 2x corner column I160: 2x roof girder I140: 2x intermediate column U160 and 1x door beam U160 à 4 meters 5 coupling tubes 70x70x3 mm 12 bracing strips flat 50x6 mm with tensioner M16 Galvanized Screws 8.8 Including NEN 1090 CE marking certificate Lot is loaded with a forklift for free Auction-ID: A1-41176-4

Youtube function and status video: https://youtu.be/3eyfAb14C7g Battery: 20/2019, 24V 375Ah, very good performance measured at 25.7V very clean device from clean laboratory Auction-ID: A1-45450-448

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/-Z5ryHlumUY - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 24/11/2018, 23.1V 205Ah 4.736kWh Lithium LI-ION, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45450-309

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/DH2wS9Fzpbs - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery: 30/06/2020 24V 375 Ah, very good performance measured with 25.1V - Triplex mast with full free lift - Integrated scale Auction-ID: A1-45450-358

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3469

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/Sp3LMaepGbc - Former Linde full-service device - Battery: 07/11/2017, 24V 3PzS 375Ah, very good performance measured with 24.8V - Initial lift - lifts 2 pallets at the same time / good ground clearance for uneven floors - Integrated scale Auction-ID: A1-45450-359

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45833-255

new and unused charger in orig. Very high quality, shockproof IP66 Extreme Waterproof With 220V plug, WITHOUT Rema plug for batteries with 150-400Ah possible Delivery by freight forwarder possible on request. Auction-ID: A1-45450-2430

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qokiutHmMJs - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 27/09/2018 48V 500 Ah, very good performance measured with 50.2V - 3rd valve; with sideshift Auction-ID: A1-45450-104

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45833-65

Charger 24V Ah with REMA battery plug and 400V wall plug Loading onto trucks no problem Auction-ID: A1-45450-3554

Electronic wire welding machine, model MIG 400-PL, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-65

Electronic wire welding machine, model mig 400 -pl, never used Overall dimensions: 1200 x 800 x 1500 mm Weight: 120 kg Auction-ID: A7-45834-255

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and condition video: https://youtu.be/Qg1_SYz7g8Y - Former Linde full-service device - Service valid until 04/2027 - UVV valid until 04/2027 - Battery: 30/10/2018, 23.1V 205Ah 4.736kWh Lithium LI-ION, very good performance measured with 25.7V - Integrated scale Auction-ID: A1-45450-305

REMA Battery Connector 220V plug Delivery by freight forwarder possible on request. Auction-ID: A1-45450-3555

Youtube function video: https://youtube.com/shorts/NzbfodNF5xA FEM3: Fits any forklift with a load capacity of 3,000-5,000kg Comes from Linde H50D. Year of manufacture: 2018 Payload: 2,400 kg Auction-ID: A1-45450-1122

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/qwHVCF8fvcs - Former Linde full-service device - Battery: 21/08/2013 48V 500 Ah, very good performance measured with 48.9V - 3rd + 4th valve with side shift Auction-ID: A1-45450-190

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/bT-c1nNi0pc - Former Linde full-service device - Service valid until 02/2027 - UVV valid until 02/2027 - Battery: 05/2022 48V 500 Ah , very good performance measured with 50.5V - 3rd valve; with sideshift Auction-ID: A1-45450-222

Foreign buyers get the 19% VAT back immediately after the machine is exported from Troostwijk Youtube function and status video: https://youtu.be/HhpvoS_ydmE - Former Linde full-service device - Service valid until 03/2027 - UVV valid until 03/2027 - Battery:27/08/2013 48V 500Ah, very good performance measured with 50.0V - Facelift model with tilt angle display (practical for sensitive goods) - Duplex mast with full free lift - 3rd valve, sideshift - 4. Additional valve free for fork adjuster - White non-marking tires - Warning light orange - Safety light at the rear - Safety light at the front - Comfort seat with lumbar support and seat heating Auction-ID: A1-45450-139