136,789 used machines on RESALE, but how to find them? Machine Search
engine lathe, year 2007, CNC 840 D. Used machine. More info & price on IndustrialBuyer.
Laser Cutting Machine Manufacturer: TRUMPF Type: Trumatic L 4050 Year of Make: 2006 Laser power: 6,000 watts Working area: 2,000 x 4,000 mm
Bystronic BySprint Fiber 4020 - Laser Cutting Machine - Bystronic ByVision CNC control - 15" TFT-LCD control panel - Operating hours: 25076 h - Cutting hours: 10728 h - Year of construction 2015 Technical data - Laser Source: Fiber Laser - Laser power: 6000 W - Working range: 4064 × 2024 × 70 mm - X-travel: approx. 4000 mm - Y-travel: approx. 2000 mm - Z-range: 70 mm - Maximum sheet thickness steel: 25 mm - Maximum sheet thickness stainless steel: 30 mm - Maximum sheet thickness aluminium: 30 mm - Maximum sheet thickness copper: 12 mm - Maximum sheet thickness brass: 12 mm - Electrical connected load: 22.7 kVA - Machine dimensions WxHxD: 13700 x 2565 x 6670 mm - Machine weight: approx. 15000 kg
Hydraulic reservoir, hydraulic tank, aluminum reservoir for hydraulic pump, hydraulic unit -Hydraulic tank: Hydraulic tank for hydraulic unit -Hydraulic tank: with level and temperature indicator -Motor mount: Ø 120 mm / bolt circle Ø 145 mm M6 -Individual components: see photos -Dimensions: 490/400/H515 mm -Weight: 25 kg.
The machine is equipped with a tailstock, a 12-station tool turret as well as a collet chuck, incl. chip conveyor
Additional technical specifications: • Support surfaces right and left: 4000 mm each • operating voltage. 3 x 400 V
• nominal voltage: 80 A • spindle internal diameter: 85 mm • incl. chip conveyor
BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)
CONTROLS CNC controls WORKING RANGE -CUBIC- X-axis travel: 650 mm Y-axis travel: 450 mm Z-axis travel: 130 mm TABLE table surface (left-right): 770 mm table surface (front-back): 630 mm workpiece load (max): 500 kg ELECTRICAL SPECIFICATIONS mains voltage: 400 V mains frequency: 50 Hz DIMENSIONS / WEIGHTS total weight approx.: 4550 kg -work area protection -exhaust system with electrostatic air filter -fire protection system (to be assessed by a qualified body) -automatic paper tape filtration unit 1x grinding motor 22 S, speed 4500 - 22500 [rpm], for EX23 collets - part number: 181561 1x 45 S grinding motor, speed 9000 - 4500 [rpm], for EX19 collets - reference: 144017 1x 80 S grinding motor, speed 40000 - 80000 [rpm], for F6 collets - reference: 144021 1x grinding motor for slot grinding (motor + belt are included) - reference: 144022 3x grindin ...
cutting diameter: 400 mm capacity 90 degrees: flat: 500 x 400 mm saw band length: 6220 x 41 x 1.3 mm speed: 15.0 - 150 m/min work height max.: 750 mm workpiece weight: ca. 250 - 300 kg/m Control: MEBA NC coolant tank capacity: 80.0 ltr. oil volume: 30.0 ltr. power capacity: 5.5 kW weight of the machine ca.: ca. 2250 kg range L-W-H: 3100 x 1620 x 2150 mm Current list price: approx. 50.000 euros Special price available upon request Features: - MEBA - Fully automatic two-column linear guide system Fully automatic machine for 90° cuts only - User-friendly NC dialog control With plain-text display 5.7-inch CE panel Program memory with 50 programs, each with 20 steps - Automatic material feed Minimum cutting diameter .. Ø 5.0 mm Residual piece length without bundle clamping .. manual 25.0 mm Residual piece length without bundle clamping .. automatic 110 mm Automatic movement of the ...
: neu : 2025 : 070145 : prompt, Zwischenverkauf v : Türkei : 44500 € : 849.95 € : 1 : 40 to : 4 mm : 630 mm : 450 mm : 160 mm : 3 - 75 mm : 154 1/min : 420 x 275 mm : 8 : 75 mm : 40 mm : 230 mm : 293 mm : 4 kW : 1174 mm : 1540 mm : 2200 mm : 2850 kg 8-fold ram guide 2-hand control panel and foot pedal Automatic central lubrication Front light guard Vibration pads User Manual in German with CE Declaration of Conformity The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Feltracon Industrial melon peeling machine The Feltracon is an industrial melon peeling machine designed for efficient peeling of whole melons in fruit processing facilities. The machine removes the rind from melons quickly and consistently preparing the fruit for further processing such as cutting portioning or packaging The system is built for hygienic operation in food production environments and is suitable for continuous industrial use
Unused disc stack with distributor and 133x Discs for a Tetra Pak D MRPX 407 SGP-34 Separator / Clarifier., - Distributor, part no: 516763 80, 1 piece., - Bowl disc, part no: 516888 88, 1 piece., - Bowl disc, part no: 516888 89, 132 pieces., Type of Machine: Disc stack, Distributor: Yes, Number of discs: 133x, Condition: Unused
CONTROLS CNC controls FANUC 310 IS WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 5 X-axis travel: 600 mm Y-axis travel: 410 mm Z-axis travel: 460 mm rotating range A-axis from: -30 ° rotating range A-axis up to: 120 ° TABLE clamping surface diameter: 350 mm SPINDLE / HEAD spindle revolutions (max): 12000 /min drive power: 18 kW AXIS DRIVES rapid traverse: 4800 mm/min TOOL MAGAZINE number of positions: 30 DIMENSIONS / WEIGHTS space requirements -left/right-: 3000 mm space requirements -front/back-: 2400 mm total height: 1980 mm total weight approx.: 7500 kg Operating hours: 35`000h Inklusieve: Vices see picture
Product: Sylysia 350, Gasil 23 D, Precarb 800, Calcilit, Benzophenone (partially lumpy), Lo-Vel 8100, Syloid 7000, bulk density: 0.08-0.73kg/l, particle size: powder, product temperature: 5-30°C, moisture: dry, consistency: free-flowing, non-sticky and non-agglomerated, system capacity: according to customer-provided container handling, operating mode: 3-shift operation, installation location: indoors/heated, ambient temperature: 5-30°C, power supply: 400V, 3Ph,N, 50Hz, control voltage: 24VDC, compressed air supply: 4-6bar, oil-free, max. surface temperature: 200°C, with documentation. An on-site inspection is possible, not connected to power.
cutting diameter: 315 mm capacity 90 degrees: flat: 400 x 250 mm capacity 90 degrees: square: 270 x 270 mm capacity 45 degrees: flat: RE 300 x 280 mm capacity 45 degrees: round: RE 280 mm capacity 45 degrees: square: RE 280 x 280 mm capacity 45 degrees: flat: LI 280 x 200 mm capacity 45 degrees: round: LI 250 mm capacity 45 degrees: square: LI 220 x 220 mm capacity 60 degrees: round: 180 mm capacity 60 degrees: square: 140 x 140 mm turning speed range:: 35 + 70 m/min saw band length: 3460 x 34 x 1.1 mm work height max.: 870 mm voltage: 400 V engine output: ca. 3.0 kW weight of the machine ca.: 550 kg range L-W-H: 2150 x 1400 x 1420 mm The MBS 400 DG model is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve ...
cutting diameter: 410 mm capacity 90 degrees: flat: 540 x 300 mm capacity 90 degrees: square: 300 x 300 mm capacity 45 degrees: flat: RE 400 x 210 mm capacity 45 degrees: round: RE 400 mm capacity 45 degrees: square: RE 260 x 260 mm capacity 45 degrees: flat: LI 380 x 170 mm capacity 45 degrees: round: LI 340 mm capacity 45 degrees: square: LI 260 x 260 mm capacity 60 degrees: round: 260 mm capacity 60 degrees: square: 175 x 175 mm turning speed range:: 45 + 90 m/min saw band length: 4290 x 34 x 1.1 mm work height max.: 866 mm voltage: 400 V engine output: ca. 3.0 kW weight of the machine ca.: 606 kg range L-W-H: 2340 x 1430 x 1460 mm The MBS 600 DG is a precision horizontal band saw designed for universal use. Key features of this machine include a swiveling saw frame for double miter cuts from -45° to 60°, as well as a hydraulic cylinder for precise lowering via a control valve. Feat ...
cutting diameter: 410 mm capacity 90 degrees: flat: 540 x 300 mm capacity 90 degrees: square: 300 x 300 mm capacity 45 degrees: flat: RE 400 x 210 mm capacity 45 degrees: round: RE 400 mm capacity 45 degrees: square: RE 260 x 260 mm capacity 45 degrees: flat: LI 380 x 170 mm capacity 45 degrees: round: LI 340 mm capacity 45 degrees: square: LI 260 x 260 mm capacity 60 degrees: round: 260 mm capacity 60 degrees: square: 175 x 175 mm turning speed range:: 20 - 80 m/min saw band length: 4290 x 34 x 1.1 mm work height max.: 865 mm voltage: 400 V engine output: ca. 3.0 kW weight of the machine ca.: 686 kg range L-W-H: 2340 x 1430 x 1550 mm The MBS 600 DGA-V model is a semi-automatic double-miter band saw for miter cuts up to 60°. The infinitely variable cutting speed and the hydraulic vise make for comfortable operation. Thanks to its solid construction, this model guarantees precise cuts wh ...
grinding diameter: 700 mm grinding length: 4000 mm centre height: 375 mm workpiece weight: 3000 kg grinding wheel size: 750 x 75 mm grinding wheel turining speeds: 375 - 1190 U/min cross adjustment of grinding head: 470 turning speed range - workpiece: 12 - 120 U/min main drive motor: 43 kW workpiece drive: 4,5 kW total power requirement: ca. 50 kW manufactured 1975/ overhauled 1995 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
pressure: 4000 t stroke: 380 mm dayligth: 1050 mm distance between columns: 1580 mm table-size: 1520 x 1600 mm dimension of ram: 1470 x 1500 mm ram adjustment: 15 mm strokes of ram per min.: 50 ejector path: 31 / 70 mm main drive: 200 kW height over floor: 7520 mm total power requirement: ca. 250 kW weight of the machine ca.: 245 t dimensions of the machine ca.: 4,4 x 4,6 x 7,5 m complete forging line includes an - Smeral Hot Forging Press - induction heater - Manyo 460-millimeter forging roll - manipulator with forging roll link - SMERAL 500-ton trimming press The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Technical data: Welding punch: 450mm permanently heated Punch passage height: max. 150mm Punch Transition: Length Compensation Longitudinal welding: permanently heated welding wedge Foil: Half tube approx. 12-80μm max diameter 400mm Max. film roll width: max. 600mm Conveyor belt: inlet and outlet 400mm wide Product output: up to 85 cycles/min Transport speed: 10-30m/min Working height adjustable: 780-930mm Overall length: 1950mm Overall width: 1650mm Overall height: 1850mm Control Panel: Sytron Colour: Kallfass anthracite Rated Power/ Rated Current: 3.5KVA / 5.1A Power connection: 400Volt DS/ 50Hz with protective conductor
Labeler Manufacturer: HERMA Type H 400 8 L Serial No. 20923342 Left-hand device with detaching edge with spring-loaded roller angled 75° (see drawing) Running direction from left to right
X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90?, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360? C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90? groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented program ...
This 5-axis Weingartner Pick Up 400 machining center for screw manufacturing was manufactured in 2023. It features a maximum workpiece length of 4,000 mm and a maximum workpiece diameter for milling of 180 mm. The machine is equipped with a Siemens 840D control system and offers advanced simultaneous machining capabilities. If you are looking to get high-quality screw manufacturing capabilities, consider the Weingartner Pick Up 400 machine we have for sale. Contact us for further details.
Fully automatic side sealing machine UNIVERSA 400 NT Used machine; Year of manufacture 2001 How does it work and stands Description: Fully automatic flow wrapping machine for packaging products – independent length – with full wrapping and without foil overlap. Maximum performance is approx. 40 cycles/min. The product is fed via a conveyor belt at the same time. wrapped in a semi-tubular film over a forming shoulder. The product indexing is done via a horizontally scanning light barrier. The feed belt is set to different product widths can be easily adjusted. After wrapping the product with The foil is cross-welded with a permanently heated welding system. The longitudinal welding is generated by a continuous side welding device. The altitude of the forming shoulder and welding equipment is manually adjustable. The remaining foil strip is picked up on a foil win ...
2 pieces dough divider RHEON, type: Twin DIvider 400 VX 202 incl. lifting tipper BMTEC Dough-friendly division from rye dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - 2 pieces of machines + lifting device from BMTEC - Condition: Good, ready to use Visits and test runs are possible by arrangement.
BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)
BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)
BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)
CONTROLS conventional BASIC DESIGN basic design: cross bed WORKING RANGE -CUBIC- number of processing axes (excl parallel axes): 3 X-axis travel: 1120 mm Y-axis travel: 350 mm Z-axis travel: 400 mm distance spindle nose - table surface (max.): 420 mm TABLE table surface (left-right): 1600 mm table surface (front-back): 400 mm workpiece load (max): 1500 kg SPINDLE / HEAD spindle type: tilting head - mode of operation: manual - mode of operation: manual spindle revolutions (max): 28 /min number of gears: 1400 tool fixture: ISO SK 40 AXIS DRIVES feed velocity (min): 16 mm/min feed velocity (max): 800 mm/min ELECTRICAL SPECIFICATIONS total power consumption: 14.5 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2700 mm space requirements -front/back-: 2350 mm total height: 2150 mm total wei ...
turning diameter: 400 mm turning length: 549 mm control: HEIDENHAIN Eltropilot swing over bed: 570 mm travel -x axis: 220 mm travel -z axis: 635 mm main spindle bore: 79 mm main spindle speed: 25 - 5000 U/min main spindle drive: 21 kW max. torque on the spindle: max. 240 Nm : 120 mm c-axis, speed: 100 U/min C-axis: Haltemoment 200 Nm C-axis resolution: < 0,04 ° sub spindle bore: 56 mm sub spindle speed: 25 - 5000 U/min sub spindle drive: 9 kW max. torque on the spindle: max. 72 Nm : 90 mm c-axis, speed: 100 U/min C-axis: Haltemoment 150 Nm C-axis resolution: < 0,04 ° feed power X/Z axis: 3,5 / 7 Nm rapid traverse X-axis: 20 m/min rapid traverse Z-axis: 24 m/min tool turret: 1 x 12 Stationen number of driven tool stations: 12 speed of driven tools: 4.000 U/min total power requirement: 44 kVA Accessories: collet fixture HAINBUCH on main spindle, 3-jaw chuck RÖHM, 140 mmø, on sub ...
cutting diameter: 420 mm saw band length: 4570 x 41 x1,3 mm table height: 800 mm cutting width: 400 mm capacity 90 degrees: round: 420 mm capacity 90 degrees: flat: 300 x 200 mm capacity 90 degrees: square: 300 x 200 mm cutting speed: 15 - 90 m/min total power requirement: 7,0 kW weight of the machine ca.: 2200 kg dimensions of the machine ca.: - m Standard Accessories for the HFA Series - Chip conveyor - Feed pressure regulator - Cut length adjustment - Multiple feed - Piece counter - Powered chip brush - Hydraulic belt tensioning - Stepless belt speed control - Jog button - Cutting and guide plates - Automatic zero stop - Cutting accuracy monitoring - NC cut length programming - Error reporting system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 400 mm capacity 90 degrees: round: 125 mm capacity 90 degrees: flat: 170 x 125 mm capacity 45 degrees: round: 122 mm capacity 45 degrees: square: 120 mm turning speeds: 3000 U/min engine output: 2,2 kW weight of the machine ca.: 95 Kg dimensions: 0,8 x 0,6 x 1,5 m Aluminum circular saw - Pneumatic workpiece clamping system - Micro-spray system The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 400 kN
Arburg 680CB 400-170 / Vertical injection moulding machine, tie-bar-less / Very good technical condition Year of Make: 2012 Injection unit: Screw diameter: 25 mm Injection weight: 54 g Spray pressure: 2500 bar Dosing volume: 59 ccm Clamping unit : Clamping force: 40 t Spar spacing: 0x0 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Very good technical condition Vertical Injection Molding Machine, Tibar-less Euromap 67 Robot interface Air Valve x 3 Hydraulic core pull x 3 Control with hot runners x 12 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter The machine has been regularly serviced by the authorised Arburg service provider Original Arburg tool crane Dimensions: Weight: 6500 kg Length/Width/Height: ...
Key data: 400 kN
Arburg 270C 400-70 e² with the Arburg Multilift robot / hybrid machine Year of Make: 2016 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Proportional valve on the injection unit – precise injection Self-closing nozzle Arburg Multilift Select 6kg transverse robot Year of manufacture: 05.2016 5-axis robot: 3 axes are driven by servo motors (electric); axis B and C Traversing in ...
Key data: 400 kN
Arburg 270C 400-70 Year of Make: 2007 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection It is possible to change the screw diameter Dimensions: Weight: 2370 kg Length/Width/Height: 2.99x1.43x1.98 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our ...
Key data: 400 kN
Arburg 270C 400-70 Year of manufacture: 11.2015 Injection unit: Screw diameter: 22 mm Injection weight: 31 g Spray pressure: 2000 bar Dosing volume: 34 ccm Clamping unit: Clamping force: 40 t Tiebar spacing: 270x270 mm Size of the clamping plates: 446x446 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Dimensions: Weight: 2210 kg Length/Width/Height: 3.18x1.43x1.98 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 1100 kN
Arburg 470S 1100-400 with the Wittmann W711 robot Year of Make: 2008 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 110 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 1 Control with hot runners x 8 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Conveyor belt integrated with the machine control system Built-in sorting flap It is possible to change the screw diameter Robot Wittmann W711 Year of Make: 2008 4-axis robot: 3 axes are driven by servo motors (electric): X, Y, Z; axis C - pneumatic Traversing in axes: X-420, Y-1200, Z-2000 ...
Key data: 1500 kN
Arburg 470C 1500-400 with the Wittmann W711 robot Year of Make: 2008 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Euromap 67 Robot interface Air Valve x 1 Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Robot Wittmann W711 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Traversing in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter Purchase of the robot at an additional cost Dimensions: Weight: 4900 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: ...
Key data: 1000 kN
Arburg 470H 1000-400 e² / Hybrid machine / Production line with the Arburg Multilift Select robot Year of manufacture: 09.2010 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 100 t Spar spacing: 470x470 mm Size of the clamping plates: 637x637 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 1 Control with hot runners x 12 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Cen ...
Key data: 1500 kN
Arburg 520H 1500-400 e² / Hybrid machine Year of manufacture: 05.2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Core train control Control with hot runners x 8 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Central lubrication Parallel movements Priamus Sensor - Tool Pressure Control ...
Key data: 1500 kN
Arburg 470C 1500-400 Year of manufacture: 07.2009 Injection unit: Screw diameter: 45 mm Injection weight: 232 g Spray pressure: 1580 bar Dosing volume: 254 ccm Clamping unit: Clamping force: 150 t Spar spacing: 470x470 mm Size of the clamping plates: 650x650 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: Core train control Hardened injection unit - Bimetal It is possible to change the screw diameter Dimensions: Weight: 4790 kg Length/Width/Height: 4.44x1.63x2.09 m Drive: Pumps/motor: 18.5 kW Heating capacity: 9.4 kW Total power: 27.9 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Key data: 1500 kN
Arburg 520H 1500-400 e² / Hybrid machine Year of manufacture: 11.2011 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 150 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air valve x 4 on the side of the fixed clamping plate Air valve x 3 on the side of the movable clamping plate Hydraulic core pull x 1 on the side of the fixed clamping plate Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inverter Machine with cylinder / battery with compr ...
Key data: 1600 kN
Arburg 520S 1600-400/170 e² / Production line with the Geiger robot Year of Make: 2012 Injection unit: Screw diameter: 35 mm Injection weight: 141 g Spray pressure: 2500 bar Dosing volume: 154 ccm Clamping unit: Clamping force: 160 t Tiebar spacing: 520x520 mm Size of the clamping plates: 695x695 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA - Touchscreen Additional equipment: 2K injection moulding machine with rotary table and robot Geiger Very good technical condition Hybrid machine: energy-saving and very quiet Euromap 67 Robot interface Air Valve x 4 Hydraulic core pull x 5 Control with hot runners x 12 Reinforced Injection Units – Bimetal Machine with two cylinders / batteries with compressed nitrogen (extra charge for fast work) The machine has a servo motor built into the injection unit, which is responsible for dosing the ...
Key data: 2000 kN
Arburg 570H 2000-400 e² / Hybrid machine / Production line with the Wittmann W823 robot / Operating hours: h in automatic mode Year of manufacture: 07.2016 Injection unit: Screw diameter: 40 mm Injection weight: 184 g Spray pressure: 2000 bar Dosing volume: 201 cc Clamping unit: Clamping force: 200 t Handlebar spacing: 570x570 mm Size of the clamping plates: 795x795 mm Ejector: electric Clamping unit: toggle lever Control: SELOGICA - Touchscreen Additional equipment: Machine in very good technical condition Hybrid machine: energy-saving and very quiet Operating hours: h in automatic mode Euromap 67 Robot interface Air Valve x 5 Core train control Air Core Pull x 3 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving The injection unit is driven by the servo motor, which is controlled by an inver ...
Key data: 400 t
The following machines are involved: Müller-Weingarten ZE 400-16.19, 400 t double column press, approx. 1,600 × 1,300 × 1,400 mm, year of construction 1963, conversion 1991. Müller-Weingarten ZE 400-20.13.2, 400 t double column press, approx. 2,000 × 1,300 × 1,200 mm, year of construction 1977, conversion 1991.
used
We are pleased to offer the following CNC turning center: DOOSAN PUMA 400LMB Year: 2011 Serial No.: ML0136-004494 Specifications: 15” chuck Spindle bore: 132 mm / 5.197” Through drawbar: 116 mm / 4.56” Maximum work length: 2,028 mm / 80” Approximately 13,000 cutting hours Long-bed configuration Machine reported to be in very good condition
BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)
Used Sacmi Labeling Machine Opera year 2010 overhauled in 2025 Model: Opera 400 (2010) • Speed: 45,000 Bottles/hour • Status: ready for operation • Formats: 500 ml, 1 L, 1.5 L. Reconditioned OPP roll-fed labeler, overhauled in 2025. This overhauled labeling machine delivers stable high-speed performance for multi-format lines and qualifies as robust bottle labeling equipment for continuous production. Performance and Specifications: The Opera 400 maintains consistent output at 45,000 BPH with quick format changes across 500 ml, 1 L, 1.5 L. Two labeling stations support continuous operation, with automatic label adjustments and manual head adjustment to keep tolerances steady at speed. This is a reconditioned OPP labeling machine. Work performed during the 2025 overhaul: The jacks The plates The glue roller were overhauled The roller motor was replaced New safety guards were install ...
Riggs 1000 Series Depositer A fantastic opportunity to purchase a high-quality Riggs 1000 Series Depositer in excellent working order. Ideal for food and beverage manufacturers looking for a robust, accurate and dependable depositing/filling machine. Specification Riggs 1000 Series Depositer Manufactured in 2010 40-litre stainless steel hopper included Heat-resistant reinforced product feed hose included Fill range: 25ml to 400ml Excellent operating condition Very well maintained Ready to go straight into production
maximum number of results exceeded
please refine your search
