bt 40 used for sale

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for premade aluminum tubes with closed cap. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: max. speed of the machine in neutral: 65 cycles/min ...

Fully automatic tube filler for pastes and liquids. Typically for cosmetics such as make-up, creams, general care products such as shower gel, hair shampoo, hair gel, toothpaste, sun blocker etc. Suitable for pre-made tubes (with closed cap) made of plastic, aluminum or laminated composite material. Fully automatic feeding, alignment of the tubes (rotation in the mould) based on print markings as well as filling and sealing of the tubes. Before filling, the tube is air-flushed to prevent contamination. No-tube-no-filling is also a standard function. Water chiller, batch/date printer and dosing unit, consisting of pneumatic piston pump and storage hopper with level sensor, are included. PLC controlled, operation via touchscreen. Optional at surcharge: heated stirrer for storage hopper, additional format sets (moulds) for different tube diameters, external tube feed lift. - Specifications: ...

Automatic water filling system for up to 4.000 bottles per hour. Including feeding system for empty bottles to the 18-head rotary rinser. Rotary filling station (12 heads) with gravity filling principle. The capping unit is working with 6 capping heads and is suitable for 28 and 30mm PE standard caps. All product contacting parts are made of SS304 or standard food package plastic. The frame is made of high quality carbon steel Q235 (optional SS304). MITSUBISHI PLC, WEINVIEW Touchscreen. - Specifications: max. speed of the machine in neutral: 66 cycles/minute | number of rinsing heads: 18, number of filling heads: 12, 6 capping heads | bottle volume: 350-2000ml | bottle diameter: 50-90mm | bottle height: 150-310mm | filling tolerance: +/- 2% | compressed air: 0.5m?/6bar | filling water: 1.5m?/h | rinsing water: 0.5m?/h | power: 380V, 3.5kW | machine dimensions: L2700xW1600xH2800mm | weigh ...

Bulk Bag unloading system with lifting crane incl. vacuum pump with a capacity of up to 400kg/h. - Specification of the lifting crane: max. weight per bag: 1T | max. bulk bag size: L1200xW1200xH1700mm | machine dimensions without side crane: L1740xW1740xH5400mm | - Specification of the vacuum pump: Capacity: max. 400kg/h | power: 380V, 1.5kW | hopper diameter: 290mm | discharge diameter: 213mm | height of vacuum pump: 800mm. That machine/system is available in different versions for different packaging sizes and with different packaging speeds. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible.  ...

PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-M (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Slide conveyor (kissing table) to allow product length of less than 50mm. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: 40 cycles/minute | packing sizes: L(30-400)xW(40-280)xH(2-80), W+H

PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-L (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Slide conveyor (kissing table) to allow product length of less than 50mm. Optional available: infeed systems for CD, DVD, etc. - Specifications: 40 cycles/minute | packing sizes: L(60-560)xW(60-430)xH(10-180), W+H

PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XL (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 40 cycles/minute | packing sizes: L(200-830)xW(200-630)xH(10-180), W+H

PRO-version of vertically working L-bar shrink wrapper. To be combined with AMTEC SHRINKtunnel POF-XXL (high speed ) PRO-version. The machine uses 4 pillars to work vertically in a very stable way with very even pressure on the shrink film. Provides excellent sealing effect with minimized wrinkle effect. The sealing frame height and sealing stroke can be modified. Easy adjustable perforation location. Optional available: infeed systems for CD, DVD, etc. - Specifications: max. speed of the machine in neutral: max. 40 cycles/minute | packing sizes: L(200-830)xW(200-630)xH(10-300), W+H

Vacuum conveyor with electric vacuum pump. - Specifications: capacity: 3000-4000kg/h (with max. 5m conveying distance) |housing: stainless steel 304 | required compressed air: 0.6 MPa | air consumption: approx. 60L/min | power supply: 220V | power consumption: 7.5kW. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Specifications Cutting width: 3.8 x 50 mm Year of Make: 1995 Power connection: 400 V/ 4 kW Price: on request Cutting speed: 354 mm/s Safety level: DIN 66399 O-2/P-3/T-3/E-2/ Cutting Type: Particle Cut Working width: 428 mm

pressure: 250 t throat: 400 mm stroke: 30...140 mm table-size: 1000 x 750 mm hole in the table: 360 x 400 mm ram surface: 630 x 500 mm ram adjustment: 110 mm total power requirement: 18 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Alpine pin mill A 400 CW. Mining by the buyer is required. 2 x available

pulling force - max.: 16 t broaching length max.: 1250 mm table width: 400 mm broaching speed: 1...6,4 m/min return speed: 19,5 m/min tool length - max.: 1500 mm total power requirement: 42 kW weight of the machine ca.: 16 t dimensions of the machine ca.: m - Specification: 2- jobs broaching right or left / right and left at the sametime The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 600 mm table width: 380 mm control: FANUC 16i-M longitudinal travel: 500 mm cross travel: 300 mm largest grinding diameter: 230 mm Jig grinding machine | HAUSER - S35-400 The machine is in a well-maintained condition and can be inspected under power at any time in the factory location. Please note that the technical details were added from comparable machines. The machine video from the production plant will be shared on request. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: S35400 | S35 400 | S35CNC400 | S35 | S-35 | S 35 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 1190 mm y-travel: 530 mm z-travel: 540 mm table-size: 1600 x 400 mm spindle drive: 11 kW tool taper: ISO 50 turning speeds: 28-1400 U/min feeds: 16-800 mm/U total power requirement: 21 kW weight of the machine ca.: 4,8 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 625 mm y-travel: 650 mm z-travel: 650 mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

BYSTRONIC Byspeed 4020 laser cutting machine was built in 2007 by the Swiss brand BYSTRONIC. The machine, designed to meet the highest industrial standards, is used for precision cutting and engraving of workpieces with a maximum thickness of 20 mm. The machining process is performed by a stable laser beam with a maximum power of 4.4 kW, which is generated by a reliable laser source of the highest energy efficiency. In turn, the operator’s daily work is facilitated by an intelligent CNC control with many useful functions. All this makes the offered BYSTRONIC laser the perfect choice for any industrial plant. The last inspection of the machine was done in 2024. The Byspeed 4020 laser cutting machine weighs 19000 kg. Technical specifications of the BYSTRONIC Byspeed 4020 laser cutting machine - CNC controller: BYSTRONIC ByVision - laser power: 4.4 kW (4400 W) - laser type: CO2  ...

-Max pressure at the end of stroke – 4000 ton -Press stroke – 400 mm -Number of stroke – 50 per minute -Max distance of stroke from the table – 1400 mm -Dimensions of slider: 1320 x 1320 mm -Bed dimensions: 1120 x 1600 mm -Bed movement by height – 20 mm -Max pressure of upper ejector – 20 t -Max stroke of upper ejector – 65 mm -Max pressure of lower ejector – 40t -Max stroke of lower ejector – 80 mm -Main motor power – 225 kW -Main motor speed – 730 rpm -Total width — 6280 mm -Total depth – 4885 mm -Total height – 8870 mm -Height over the bed – 7315 mm -Total net weight – 280 092 kg

A Haco hydraulic shear is available. Working width: 4000mm, max. sheet thickness: 8mm, cutting angle range: 0.5°-3°, stroke rate: 11 strokes/min, backgauge: 1000mm, machine dimensions X/Y/Z: approx. 5000mm/2000mm/1800mm. On-site inspection is possible.

pressure: 400 t distance between columns: 600 mm stroke: 600 mm table-size: 3000 x 1500 mm travel x / y: 2200 x 900 mm working feed: 7 mm/sec tank capacity: 66 l working pressure: 30-250 bar total power requirement: 18,5 kW weight of the machine ca.: 25 t dimensions of the machine ca.: 3500 x 3500 x 3700 m 2. STANDARD EQUIPMENT FRAME - Welded steel frame - Frame and plates are precision-milled using a CNC milling machine - Chrome-plated cylinder - Worktop with threaded holes HYDRAULICS - Bosch Rexroth hydraulic pump - Hydrapack or Badestons hydraulic directional control valve - Hydraulic block in accordance with EN standards - 1000-liter hydraulic oil tank - Pressure adjustment via pressure transmitter/regulator ELECTRICS - Control cabinet in accordance with EN standards - All cables are labeled and clearly arranged - All electrical components are from Siemens CONTROL PANEL - Stroke cont ...

A DMT lathe is available. Center distance: 1000mm, swing diameter over bed/face slide: 420mm/210mm, bed height: 340mm, spindle bore: 64mm, spindle diameter: 115mm, speed: 4000rpm, quill diameter: 60mm, quill stroke: 140mm, face slide width: 210mm, face slide length: 640mm. Machine dimensions X/Y/Z: approx. 2150mm/1150mm/1700mm, weight: approx. 1800kg, control: Heidenhain, operating hours: approx. 300h. Documentation available. On-site inspection is possible.

Dough divider RHEON, type: Twin DIvider 400 VX 202 -completely overhauled- Dough-friendly division from roe dough to Italian ciabatta. The dough is divided by weight and not volume, which means that there is no pressure on the dough and the gluten is preserved. - 1 or 2 rows - RHEON Gravimetric control - Capacity: 800 kg/h - Tested starting width: 130-150 mm - Weight range 1 row: 150 - 1,200 g - Weight range 2 rows: 75 - 600 g - The machine was dismantled into all its individual parts and wear parts were replaced - Condition: Perfect, like new - Warranty: 6 months Visits and test runs are possible by arrangement.

Mazatrol Matrix Control Travel: X-axis: 560 mm Y-axis: 640 mm Z-axis: 640 mm 2 pallets 400 x 400 mm Milling spindle with increased torque Spindle motor 30 kW Max. spindle speed 18,000 rpm NC rotary table, 360,000 positions Tool changer with 80 stations SK-40 Tool Holder Tool length measurement Preparation of the Renishaw Infrared Measuring System, OMP60 Conveyor 15 bar high pressure pump CE mark

Commonrail pump As good as new with 400 hours

Boku RS 40 E with 1 kettle, 1 broom Machine cleaned and tested.

turning diameter: 400 mm swing diameter: 420 mm x-travel: 850 mm z-travel: 315 mm spindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mm turning speeds: max. 4000 U/min tool turret 12 times: C5 Capto rapid traverse x + z axis: 45 / 30 m/min feeding force: 11 kN total power requirement: 58 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

TECHNICAL DETAILS Travel X x Y: 4000 x 2000 mm Cutting range X x Y x Z: 4064 x 2032 x 70 mm Workpiece weight: 1270 kg Positioning speed per axis / simultaneous: 100 / 140 m/min Axis acceleration: 12 m/s² Position accuracy: ±0.1 mm Repeatability: ± 0.05 mm Edge Detection Accuracy: ± 0.5mm Table: Interchangeable table system Laser Source: Fiber 4000 Power: 4000 W Wavelength: 1μm Polarization: unpolarized Pulse Rate: 1 - 2500 Hz Sheet thickness steel: 20 mm Sheet thickness aluminium: 15 mm Sheet thickness stainless steel: 15 mm Sheet thickness copper: 8 mm Sheet thickness brass: 8 mm MACHINE DETAILS Dimensions: 12.9 x 6.75 x 2.5 m Weight: 15 t Power: 25 kW Switch-on time: 23,477 h Laser switch-on time: 5,248 h

Key data: 45 °, 3 mm, 2 mm

SCM SiI400N Sliding Table Saw Mark SCM Type SI400N M-No.: AB/127843, 071528 Built in 1999 Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3000-4000-5000 tpm. Cutting height 130 mm. (Saw blades. 400 mm.) Saw blade swivel 0 - 45° Scoring ø mm, ID: 20 mm Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Lay-down table: steel Lay-down table with licence for angle cuts Length stop anodized aluminum with 2 flaps Control panel Digitale-analoge zaaghoogte aflezing Condition Fully functional, very SCM maintained

Manufacturer: Bitzer Model: 2JES-07Y-40S Machine Type: Semi-Hermetic Refrigeration Compressor Condition: New Supply Voltage: 400V / 3Ph / 50Hz Shipping Weight: 50 kg Net Weight: 43 kg Compressor Details: • Type: Semi-Hermetic Piston Compressor • Series: CE1 • Number of Cylinders: 2 Ncebjwudyqemy Ex Ipou • Flow Volume: 5.21 m³/h • Compression Type: Piston • Oil Type: BSE32 (BSE55 for R134a, R450A, R513A, R1234yf if tc > 70°C) • Oil Charge: 1.0 L Electrical Data: • Starting Current (LRA): 14.8 A • Max Operating Current: 3.7 A • Max Power Consumption: 1.9 kW Refrigerant Compatibility: R134a, R450A, R513A, R1234yf, R404A/R507A, R448A/R449A, R454C, R455A, R407F Pipe Connections: • Suction Line: 16.0 mm (5/8") • Pressure Line: 12.0 mm (1/2") Sound Power Level: 63.0 dB(A) at +5°C / 50°C Dimensions: • Width: 220 mm • Height: ...

Key data: 45 °, 3200 mm, 1250 mm

Griggio Unica 400 sliding table saw Mark: Griggio Type: Unica 400 Year of Make: 2010 M-No.: MC00101468 Main saw: ø400 mm, saw protrusion 125 mm, inclination 0-45° Saw blade height-, -bevel adjustment: electric with digital display Speed: Saw blade protruding: 0-125 mm electric with digital display Saw blade tilt: 0 - 45° electric with digital display Motor: 7.5 KW Vorrits saw: 0.75 KW, ø125 mm Trolley 3,200 mm Cutting width: 1,250 mm electrically with digital display on the width stop Length stop: 2,200 - 3,300 mm Lay-down table: steel with scale angle display, adjustable support support and product-friendly roller Extraction: Top: ø80 mm, Bottom: ø120 mm Weight: 820 KG

High: 2.900 mm, Long: 2.200 mm, Speed: 22.4 / 2.800 r.p.m., Width: 900 mm, Weight: 2.350 kg, Voltage: 220 / 380V, Ø column: 300 mm, Ø spindle: 80 mm, Total power: 5.3 kW, Spindle displacement: 360 mm, Surface of the table: 1,300 x 750 mm, Do not. drill spindle speeds: 15, Advances min / max spindle chuck: 0.032 / 1.5, Number of drill spindle advances: 12, Max. distance spindle axis column: 1.200 mm, Maximum distance table to spindle: 1.100 mm, Minimum distance table to spindle: 750 mm, Specification: Radial

Cooling equipment - weight: 200kg L 1,700 x W 800 x H 900 cm, High: 2.100 mm, Long: 2.400 mm, Width: 2.400 mm, Weight: 2,500 Kg., Voltage: 380 V, Total power: 4 Kw, Wheel speed: 2,250 / 6,000 rpm, Grinding length: 400 mm, Ø max workpiece: 320 mm, Transversal stroke: 260, Longitudinal stroke: 400 mm, Distance between points: 700 mm, Race car rolling (x axis): 400 mm, Vertical travel of trolley wheel: 280 mm, Specification: Universal

Key data: 400 t, 30000 mm

The machine is in good technical condition, inspection and test drive is possible by prior arrangement.

A centerless CNC cylindrical grinding machine Tschudin is available. Workpiece diameter min./max.: 1.5mm/100mm, max. grinding length: 250mm, grinding wheel diameter outside/inside: 400mm/203.2mm, grinding wheel peripheral speed: 50m/s, grinding wheel power: 11kW, control wheel diameter outside/inside: 225mm/127mm, speed: 265rpm, inclination: +/-5°, power: 3.7kW. Machine dimensions X/Y/Z: approx. 2000mm/2400mm/1900mm, weight: approx. 6000kg, control: Fanuc 21i-MB. Including Knoll Micro Pur 240 F ultra-fine filter, Streuli SHSRT300-TL142/180 lifting station and Kraft & Bauer FB703S-UV3-TFM70° fire extinguishing system. Documentation available. On-site inspection is possible.

CDM PREALPINA USED EXTRUSION LINE, for HDPE LDPE LLDPE PS PC ABS PP, nominal throughput rate 380 kg/h (depending on material and feeding rate), ABB Main drive 117 KW 380 V 50 H 3Ph (65% used in work), loading hopper, extruder with heaters and vents, fitted with a 105 mm Ø screw 40 L/D, n.1 vacuum degassing pump, semi-automatic non-stop hydraulic screen-changer (200 mm Ø)complete with hydraulic pack, water ring pelletizer, drying centrifuge, electric cabinet, CE compliance, User’s manuals, Electrical drawings, The line is offered either CHECKED or RECONDITIONED to various extents., capacity: 300-430 kg/h nominal

WATER RING HORIZONTAL PELLETIZER, Constructed in a stainless steel sturdy structure, 16.25 kw installed power, for PE PP production average 300-400 kg., steam extraction vent, water-water heat exchanging unit (to be connected to a chiller), N.1 die (customized to project), N.4 rotating knives, N.1 blade-holder, N.1 blade adjusting template, N.1 thermoregulated area, Heating power 6 kW, Cutting drive power 3 kW, No. 1 water pump for water re-circulation, ELECTRIC CABINET (OPTIONAL - can be connected to extruders cabinet), This machine is available in other sizes and in dry version., When submitting your enquiry, please give details of :, - MATERIAL type and size, - CAPACITY required, - if CABINET is needed or possible connection with existing extruder cabinet, installed power - used power in work: about 60-65% : 16.25, capacity: 300-400 kg/h

Availability: as of now Current format: 170 x 92 x 25 mm Performance: 40 cycles Step offshoot: yes Gluing machine: on request Machine is in good and functional condition according to its age

Holke F-10-V X: 815 - Y: 400 - Z: 420 mm Max longitudinal travel X-axe: 815 mm Max cross-travel Y-axe: 400 mm Max travel Z-axe: 420 mm Power on spindle: 2 HP Admission in millinghead: ISO 40 Max quill travel Z´: 130 mm Spindlespeeds: 57 > 2275 rpm Table size: 1120 x 255 mm Weight: 1300 kg

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Pinacho SC 200 Ø 402 x 1000 mm Distance between centers: 1000 mm Swing over bed: 402 mm Swing over cross-slide: 380 mm Swing in gap: 560 mm Diametre of main spindle bore: 42 mm Power on main spindle: 4 kW Number of speeds: 40 > 2800 rpm Digital screen: yes Length: 2390 mm Width : 910 mm Height: 1625 mm Weight: 1190 kg

diameter: div. number: 40x tool adaptor: BT 40 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

kop kan draaien: 90° (R amp; L) / 45° (F amp; B) 360° bovenarm draaibaar spindelhartlijn tot kolomoppervlak: 71 gt; 476 mm Max longitudinal travel X-axe: 750 mm Max cross-travel Y-axe: 305 mm Max travel Z-axe: 406 mm Max height workpiece: 70 > 476 mm Power on spindle: 2 HP Admission in boring head (ISO): ISO 30 Spindlespeeds: 3750 rpm Length: 1435 mm Depth : 1600 mm Height: 2100 mm Weight: 1 ton

4 Kopf Bohrmaschine / 4 head Paper Drilling machine Josef Foellmer IRAM 400/445Serial-No. 2190

Bread cutter with circular knife for cutting oven-fresh products without the use of oil! for approx. 35cm loaves of bread with approx. 25cm width and approx. 15cm height Lens thicknesses from 4-24mm selectable Output approx. 130 sections per minute with bread rack for bagging with safety cover completely stainless steel clad Dimensions: W 80 x D 70 x H 110cm

Kopierrahmen / Copyframe O.M.S. COPYSTAR 4050

Laser power: 4000W (4kW), wavelength: 1030nm, beam quality (BPP): 8mm/mrad, beam diameter setting: 0.1µm, machine dimensions X/Y/Z: approx. 1000mm/1600mm/1600mm, weight: approx. 1000kg. Including 2x scanner optics (PFO) for the process cells, 3x fiber optic cables and spare parts. Documentation available. On-site inspection is possible.

Buchstraße-Hardcover / Casing In Line Kolbus BF 40T Year 1977 - Serial-No. 558 Format / Size min. 100x125mm - max. 270x365mm Buchblock Dicke / Book block thickness 6 - 70mm Leistung / Mechanical speed max. up to 40 Takte/min. Buchstraße Ausstattung / Casing in Line consists of: Fliessdreischneider / Three knife Trimmer Wohlenberg Modell 44 Rundungsstation / Rounding Station Hinterklebestation für Gaze Kapitalbandstation / head-tailbanding and backlining station Deckenanleger / Case Bending Station Falzeinbrennstation / Pressing Unit Kolbus FE Pressing Stations with Heated Joint Forming

Falz- und Buchblockpresse / Nipping and Smashing Kolbus FM 405 - AB 370 Buchblockfalz- und Ganzpresse mit Buchblockanleger Book Block Joint and whole Block Press with Book block feeder Baujahr / Year 1988 - Serial-No. 308 Format (unbeschnitten) / Size (uncut) min. 125 x 100 x 6mm - max. 380 x 290 x 80mm Sehr guter Zustand / Very good Condition Maschinengewicht / Machine weight 4200kg

Polyester fiber production line Polyester fiber production line, manufactured in 2008, put into operation in 2010. From the end of 2012 until the second half of 2019, fiber production was suspended. The productivity of the line is 10,000 tons of fiber per year. The possibility of producing fiber from primary raw materials - PET granules and from secondary raw materials - PET flakes (recycled PET bottles). The main default raw material (as cheaper) is PET flakes. The available spinneret can be used to produce solid fiber 3, 7 and 15 denier, and hollow fiber, 7 and 15 denier. Hollow fiber can be produced in the "conjugated" type. Can buy and use other denier spinnerete according needs. The main components of the line: Fiber extrusion line • Vacuum dryers, volume 8m3, heated with thermal oil, year of manufacture 2011 – 4 units. + In 2019 instaled, elevators and a screw conveyor for  ...

Pressing force: 3200kN, enlarged stroke: 810mm, working width: 4050mm, ram speed: downwards: 130mm/s, pressing: 6.5mm/s, upwards: 75mm, stop time: 109ms, safety distance: 174mm, weight: approx. 29000kg, operating hours: 16010h, control: Cybelec ModEva 15S. Including 4 bending aids and angle measuring sensor. Dies, embossing tools, pointed punches, roe foot punches, closing bar, extension for upper tool, radius tool and adapter available on request. Documentation available.