bt 40 used for sale

Absolute encoder -Hollow shaft: Ø 12 mm -Dimensions: 80/85/H60 mm -Weight: 0.5 kg

Type: Industrial Winder Fritsch CRH120/400 Cone Winder with inlet and outlet belt made of silicone fabric new winding tapes Band width: 400mm Version in stainless steel Machine is mobile Connection: 400V, 1kW, 16A CEE plug Condition: completely repaired and in good condition

Sliding table saw Circular table saw Circular saw Carpentry circular saw Format saw WH Machines Type: Z45 - 400E Professional New wide aluminium format slide 320 cm with carbide round bar guide system Width approx. 415 mm Cantilever table with extendable aluminium cut-to-length stop, incl. 2x folding stop Cutting to length up to approx. 300cm Electric height adjustment of the saw blade Stable round bar guide of the sawing unit. Electric swivel of the saw blade up to 45 with digital display of the swivel angle precise swivel segment guidance of the saw unit. Parallel fence up to 125cm with fine adjustment stable 50 mm round rod guide Parallelogram protection device with upper suction foldable away for vertical workpiece cuts. 2 different speeds adjustable (4000/ 600rpm) Saw blade diameter up to 400 mm Cutting height at 90°: 125 mm Scorer wi ...

Maximum force ton-force 400 Slider stroke length mm 250 Slider stroke length to lower position mm 12 Slider strokes per minute 25 Number of single turn-on 19 Maximum distance between table and slider (in lower position of slider) mm 510 Adjustment mm 160 The sizes of a under-forginig plate mm 1000 Table overall dimensions: mm - from front to rear 1000 - from left to right 1000 The sizes of an aperture in a table mm 630 Slider overall dimensions mm 800 x 800 window dimensions in cheeks mm 600 Total power of electric motors kW 43,3 Press overall dimensions mm - length 3470 - width 3140 - height 5940 Press weight without hydropneumatic pillow kg 31 400

clamping force: 800 kN injection volume: 177 cm³ screw diameter: 35 mm platen size: 580 x 580 mm Condition: used, Specification: Horizontal injection moulding machine, type: Ergotech viva 80-400 - Internat. Size specification: 800 - 400 injection unit: - Screw diameter: 35 mm - L/D - ratio: 20D - Injection volume: 177 cm³ - Injection pressure: 2387 bar - Cylinder heating: 8,8 kW clamping unit: - Clamping force: 800 kN - Max. opening stroke: 450 mm - Mould installation height: min. 250 mm - Max. platen distance: 700 mm - Mould clamping platens: 580 x 580 mm - Clear column distance: 400 x 400 mm Total machine: - Oil tank filling: 220 ltr. - Pump capacity: 15 kW - Voltage: 3x 400V, 50 Hz, N, PE - total power: 23,8 kW - Dimensions L/W/H: approx. 4250 x 1270 x 1795 mm - Weight without oil approx.: 3,600 kg - 1x core pull Plant i ...

4000 x 2000mm 6000w with auto pallet changer

Packaging machine Beck Fitpacker Junior FJ 1040 U - Used equipment built in 1995 - small repairs necessary The Fitpacker Junior has a high packing performance and can process products of different lengths in disorder. A programmable logic controller is located at the top of the control cabinet and is easy to handle via a logical user interface. The packer also has a feeding system, which is especially suitable for line operation. Machine changeover times are kept short by a digital operating concept and an adjustable shape shoulder. The control cabinet can be opened and swivelled so that optimal access is guaranteed in the event of maintenance and downtimes are reduced. The film roll holder is mounted at an ergonomically reasonable working height. Working speed: Actual production speed and effective net output depend on format, Type and composition of products and can ...

Glue melter, glue machine, hot glue machine, industrial hot glue gun, hot melt glue gun -Module for: hot glue system -Number: 4x available -Price: per piece -Dimensions: 100/30/H30 mm -Weight: 0.3 kg

Feed technology, feed device, storage container with automatic feed, spiral conveyor, feeder-bowl -Automatic feeder without: storage container -Connection: 230 volts -Dimensions: 310/310/H260 mm -Weight: 31 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 63 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Total length: 250 mm -Total length extended: 313 mm -Dimensions: 53/53/H250 mm -Weight: 1 kg

Specifications: Passage width: 400 mm Passage height: 150 mm standard, the passage height can be changed by using additional strips Hood length: 1,700 mm Transport length: 2100 mm Transport rod spacing: every 4th rivet occupied Teflon net coating for products with a small footprint Current type: 230/400 Volt three-phase current N-PE Heating power: controlled by solid stat. relay Power: 19 kW Throughput speed: infinitely variable Color: Hammer blow aluminum No guarantee is assumed for the technical data given in the description.

The scope of delivery includes: 01x Steel beam, used Material color: white Total length: approx. 4,020 mm Box profile height: approx. 130 mm Width box profile: approx. 50 mm Material thickness: approx. 1.75 mm Weight: approx. 25,50 kg | Pcs. Note: - The steel beams may be slightly bent, as well as dents or others have damage. - 2 agraffes and 2 angles welded on.

Identification system -Type: BIS F-403 -Voltage: 24 V DC -Dimensions: 130/175/H45 mm -Weight: 0.55 kg

Heavy-duty casters, heavy-duty wheels, tires, solid rubber tires -Load capacity: kg -Tire size: 400 x 145 mm -Holding bore: 60 mm -Number: 3x wheels available -Price: per piece -Weight: 60 kg/piece

Boring head, spindle head, drilling head, grooving drill head, grooving head, spindle drilling head, boring head, spindle tool -Manufacturer: Sandvik Coromant R391.B03R-40F53 A -Socket: Ø 40 mm -Boring tool holder: 16 x 8 mm -Tool: Ø 435 mm -Weight: 6.1 kg

Pneumatic cylinder, air cylinder, pneumatic ram, air ram, rotary drive, actuator, actuators, gear motor, rotary valve, pneumatic cylinder actuators -Stroke: 83 mm -Piston diameter: mm -Piston rod: 30 mm (connection thread) -Total length: mm -Total length extended: mm -Dimensions: 530/380/H380 mm -Weight: 26 kg

Integrated system with 3 Bitzer compressors 4PES-10Y-40P and switch box TK compound or normal cooling compound system. Price on request.

diameter: 400 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 1 piece 3-jaw power chuck make FORKARDT type 3WF 400 K15 S23 Ø 400 mm with centrifugal force compensation The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Clamping angle for workpiece clamping, measuring device -Dimensions: 400/350/H230 mm -Thickness: 35 mm -Groove: 15 mm -Surface: milled -Weight: 48 kg

Description SHOOTING FRORIEP 40Dv Carousel Lathe. Modernized in 1998, among other things, a driven tool system (C-axis) was installed and the control was modernized to 840 C. Details Serial number 11330051 Year of construction 1980 Control SIEMENS electrical connection 400 V Face plate diameter 3,500 mm Workpiece height 3,000 mm Face plate over corridor 160 mm Total power requirement 71 kW Space requirement approx. 13 x 6 m Reconstruction 1998

Grinding wheel, cup wheel, bench grinder, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outer: Ø 403 mm -Width: 15 mm -Price: per piece -Number: 1x available -Weight: 3.6 kg

Grinding wheel, cup wheel, double grinding stand, surface grinding machine, cylindrical grinding machine -Inside: Ø 127 mm -Outside: Ø 400 mm -Width: 10mm -Price per piece -Quantity: 1x piece available -Weight: 2kg

belt width 400 mm all stainless steel adjustable speed with lower and upper belt adjustable upper belt with outfeed belt mobile dimensions (l x w x h) : ± 2.200 x 800 x 1.200 mm

Sell a draft fan R 400 / 51-895 with a Siemens motor 1CV3182A

Grinding wheel, cup wheel, double bench grinder, surface grinder, cylindrical grinder -Inner diameter: 127 mm -Outer diameter: Ø 400 mm -Width: 10 mm -Quantity: 1 available -Weight: 2.2 kg

Centrifugal fan, dust extractor fan, fan, extractor, dust fan -Motor power: 15 kW -Speed: 2930 rpm -Total pressure: 400 da Pa -Volume flow: 5000 m³/h -Connection input: Ø 400 mm -Connection output: 380 x 320 mm -Dimensions: 920/760/H775 mm -Weight: 216 kg

Gear motor, electric motor -Speed: 80 rpm -Power: 0.14 kW -Construction: B3 -Diameter shaft: Ø 7 mm -Protection: IP -Number: 1x engine available -Price: per piece -Weight: 4.5 kg

clamping force: 1.000 kN injection volume: 203 cm³ screw diameter: 40 mm platen size: 580 x 652 mm Condition: used, Specification: Horizontal 2K-injection moulding machine, injection unit 1: - Screw diameter: 40 mm - injection volume: 230 cm³ - weight: 205 g Clamping unit: - Clamping force: 1000 kN - Centring: 125 mm - Platen size: 580 x 652 mm - Mould size: 400 x 400 mm - Mould thickness min.: 250 mm - Mould thickness max.: 450 mm - 1x core pull - Voltage: 3x 400V, 50Hz, N, PE - Total power: 25 kW - Dimensions L/W/H: approx. 4,350 x 1,400 x 1,900 mm - Weight approx.: 4,750 kg Further DEMAG plastic injection moulding machines and a conveyor control/material station for 4 to 56 separators for granulate conveying on our homepage. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 400 mm -Groove: mm -Height: 150 mm -Dimensions: 600/700/H150 mm -Weight: 147 kg

Clamping plate, scribing spotting plate, measuring plate, measuring table, welding table, welding table, straightening plate -Width: 400 mm -Length: 502 mm -Height: 120 mm -Plate thickness: 28 mm -with: support ribs -Weight: 50 kg

Feed motor for inert gas welding device, inert gas device, gear motor, electric motor, direct current motor -Manufacturer: Migatronic -Type: 402535 24 volts -Number: 1x motors available -Price: per piece -Dimensions: 250/130/H160 mm -Weight: 3.4 kg

We sell a baguette system of the company JAC type BA 402 incl. baguette long roller. Outdated! As good as new

Hand wash basins, wash basins, built-in basins -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 40 mm -Drainage: Ø 50 mm -Number: 4x available -Price: per piece -Dimensions: 580/480/H250 mm -Weight: 5.1 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 250 mm -Edge: 22 mm -Drainage: Ø 60 mm -Number: 12x available -Price: per piece -Dimensions: 440/440/H300 mm -Weight: 3 kg

x-travel: 400 mm y-travel: 450 mm z-travel: 35 mm Control: Heidenhein TNC 530 table weight: 200 Kg : Random 36 fach tool adaptor: HSK E40 turning speeds: 30.000 U/min total power requirement: kW weight of the machine ca.: 7500 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 400 x 400 mm -Depth: 200 mm -Edge: 19 mm -Drainage: Ø 64 mm -Number: 7x available -Price: per piece -Dimensions: 440/440/H200 mm -Weight: 2 kg

Handwashing basin, washbasin, weld-in basin, weld-in swivel basin -Stainless steel washbasin -Internal dimensions: 500 x 400 mm -Depth: 300 mm -Edge: 24 mm -Drain: Ø 64 mm -Quantity: 4 available -Price: per piece -Dimensions: 550/450/H300 mm -Weight: 4.2 kg

Hand basin, wash basin, weld-in basin -Stainless steel sink -Interior dimensions: 500 x 400 mm -Depth: 250 mm -Edge: 18 mm -Drainage: Ø 97 mm -Number: 12x available -Price: per piece -Dimensions: 540/440/H250 mm -Weight: 4.3 kg

Hand washbasin, washbasin, weld-in basin, swivel basin -Stainless steel sink -Internal dimensions: 400 x 400 mm - Depth: 300mm -Edge: 18mm -Number: 20x available -Price per piece -Dimensions: 440/440/H300 mm -Weight: 3.9kg

Demag Ergotech Viva 800-400 (144) Description without funnel General Information SKU: 144 Availability: In stock Year of construction: 2001 Brand: Demag Specifications Injection weight: 205 g Clamping force: 800 kN Screw diameter: 40 mm Spray pressure: 1830 bar Tie bar spacing: 400 x 400 mm Clamping plate size: 590 x 580 mm Tool installation height min.: 250 mm Control: NC4 Language: German Power: 26.1 kW Operating hours: 70180 h Weight: 3600 kg Dimensions: 4.35 x 1.7 m Funnel: No Core train: Yes

Saw roller block, saw roller block, sawhorse, roller conveyor block -for: hacksaw, band saw, cold circular saw -Roll height: 735 mm -Roll width: 400 mm -Dimensions: 420/430/H735 mm -Weight: 46 kg

Brand Allibert Year of manufacture: Used Dimensions LxWxH (mm) Outside: 400 x 300 x 350 (320) / Inside: 350 x 250 x 310 Weight (Kg) ca 1,70 each Number of pieces in stock 1232 Made in Belgium Comments PP PVC box incl. covers ( small amount little damages)

NH fuse -NH 3 -400 A 500 V AC -Price: per package -Number: 5 pieces -Weight: 1.7 kg

centrifugal pump, water pump, multi-stage vertical centrifugal pump -Max. flow rate: 5.0 m³/h -Pressure: max. 25 bar -Motor power: 3 kW -Speed: 2840 rpm -Housing and impeller made of: stainless steel -Weight: 45 kg

4/2-way valve, solenoid valve, pneumatic valve, air valve, pressure valve, valve block, control block -Type: 0 820 401 005 Price: per piece -Number: 8 available -Weight: 0.6 kg

Drawer cabinet, tool cabinet, steel cabinet, workshop cabinet -Tool cabinet: steel cabinet with drawer and intermediate shelf -Width: 500 mm -Depth: 400 mm -Height: 970 mm -Door: lockable, without lock -Weight: 36 kg

FORMING, GLUING AND BREADING LINE, KOPPENS + MULTIFORCE CONTRACT LIMITED Technical description: Forming machine Koppens, type: VM 400-HS Dimensions: 2100 x 800 x 2080 mm Gluing machine Koppens, type: ER 400 Dimensions: 1435 x 815 x 1620 mm Breading machine Koppens, type: PR 400 Dimensions: 2470 x 670 x 2050 mm Gluing machine Mutliforce Contract Limited Dimensions: 1100 x 600 x 1670 mm

Press 400x600 make ZDA Type 100660 manualy operated electrical heated plates Clamping force 1540 kN

Control unit, control panel, operating unit, keyboard, screen, control, two-hand control console -Manufacturer: Starkstrom Gummesbach, two-hand control panel -Dimensions: 400/400/H915 mm -Weight: 18 kg

Conveyor belt, belt conveyor, conveyor belt rubber, rubber conveyor belt -Conveyor belt: with conveyor ribs -Width: 400mm -Length: 7120mm -Transport dimension: 1200/400/H300 mm -Weight: 26 kg