129,240 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
The heat exchanger furnaces are part of the system and were only ordered separately. The new price of the plant was thus over EUR 2 million. The official commissioning was in April 2024, but these were only test runs and not series operation. Technical Data – Modular Chamber Furnace Plant for Homogenization of Aluminum Bolts (Used Plant) Machine type: Modular chamber furnace system with heat recovery Application: Homogenization (heat treatment) of aluminum bolts in batches Design: Electrically heated chamber furnaces with jet heating and air circulation, heat exchanger furnaces, charging machine, racks Plant design The system essentially consists of: • 1 heating furnace (BSN 1607) – electrically heated, jet heating • 2 holding furnaces (BSN 1608, 1609) – electrically heated, air circulation • 2 heat exchanger furnaces (BSN 1610, 1611) – unheated, with air c ...
BSI Tray Mixer Designed to mix BSI containers of type NGV (1125x1325mm) Maximum weight to mix (with container) 800Kg, Maximum admissible load: 800kg (with container), Number of tanks sold: 0
General SKU065B384 MakeBabcock-BSH AG Krefeld TypeVakuumschrank 10/75/100/1/Sp Year of construction1979 LocationBarneveld Pressure Working pressure0 Bar Vacuum possiblecheck Working pressure trays3.1 Bar Main Features MaterialStainless steel Volume1500 Ltr. Surface7.5 m2 Specified Features - Tray dryer Tray dryer(1x) Stainless steel housingcheck Stainless steel trayscheck Heating surface7,5 M2 Drying chamber capacity1500 Ltr Max. temperature110 Degr. C. Number of trays9 plates + bottom plate Tray sizes750x1000mm Distance between the trays150mm Tray capacity9x 8Ltr + bottom plate (I=8 Ltr) With 1 doorcheck MaterialStainless steel Information Floorspace1,6x1,3 M Total height2,1 M Weight2150 KGDiscountTray dryersBabcock-BSHDiscountDryers > Tray dryersBrand > Babcock-BSH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price co ...
used
ULTRASONIC INSPECTION - TESTQMATIC - TYPE: SPA-2N, L=5-60 M, 1 M/SEC., 1988 EDDY CURRENT INSPECTION - MPA - 1989 RAIL PROFIL MEASURING DEVICE - SCHMITZ & SÖHNE AND BSB - 1989 PRODUCT HEIGHT: 95-165 MM, HARDWARE & SOFTWARE
Safety switch, Safety Switch, Magnetic door contact safety switch, Surface magnet, Electromagnetic locking system, Electric door opener -Manufacturer: BSW, surface magnet door contact safety switch Ovp -Type: EF150UPCTC -Operating voltage: 12/24 V -Number: 2x electric door openers available -Price per piece -Dimensions box: 280/95/H40 mm -Weight: 1,3 kg/piece
Base plate, construction fence base, barrier base -Quantity: 16x made of plastic -TL-Footplate -K1 Dimensions: 800 x 400 mm -Insert pockets: 40 x 40 mm, 60 x 60 mm, 2x Ø 42 mm -Suitable for: shaft pipe, construction fence or barrier fence
Pneumatic hardware scissors Pressta Eisele BST for cutting and shortening fittings, hinges and various other metal fittings. Max. hardware size approx.: 17x7 mm Used machine
KITZINGER contino 250BS1 bucket washing system, still in original packaging, System structure:, 1. 2000mm inlet table, wash material transport via scan belt chain with cams every 500mm, fixed pass-through height 400mm height (hold-down device adjustable with M6 threaded rods), bottom partially open with space for 1 E2 container as dirt trap, horizontal pass-through opening downwards, self-draining bucket bottom, 2. Washing 1000mm long, tank 400l with large outer filter housing, EDUR stainless steel circulation pump 4kW 1500l/min at 1.5bar, heating 20kW steam directly with Spirax Sarco mixing nozzle, 3. Rinse with fresh water, hourly requirement 300-400l (adjustable), length 800mm, including steam countercurrent, Inlet table 2000 mm Washing 1000 mm Rinsing 800 mm Neutral area 500 mm Blow-off 1800 mm Outlet 2000 mm Total length 8100 mm, KITZINGER contino 250BS1 bucket washing system, pump ...
Flexible and efficient system for the manufacture of prefabricated houses The Randek BS20 butterfly table is a flexible and efficient system for the production of almost all types of building elements such as: walls, floors, interior/exterior roofs and gables. The BS20 was developed for the production of prefabricated building elements and is a popular machine for start-ups, but it is also used by large producers throughout their production. BS20 tables are equipped as standard with features to ensure high-quality and efficient production. In addition, many additional functions are available, developed in close cooperation with our successful customers around the world. Flexible system Table length: 7.5 m Width adjustment (wall height): between 2250 and 3100 mm The system can be used as a stand-alone table or configured as a complete production line Pneumatic or hydraulic squaring fu ...
Counter: number sets: 2092702 // sheets: 2102565 // stapling: 1807398 // folds: 2022952 // cuts: 1763900 Equipment: 2xTOWER BST10 / BST 10 (each 10 stations) M.No.: 02 01 4 1834 M.No.: 02 11 4 1769 BDF M.No.: 40 12 4 1046 Two spare wire stitching heads included
Resolver cable FESTO KRES-BSM-x 165645 Length(x): 10 m New ! Dimensions: 430 x 430 x 60 mm
Motor cable FESTO KMTR-BSM-50/63/80-x 165640 Length(x): 10 m New ! Dimensions: 430 x 430 x 60 mm
SIEMENS SIMOPAC BSM181F 98030 parts come from spare parts warehouse and are checked with protocol Dimensions: 80 x 40 x 40 mm
Control panel, control panel, control panel VEM, ERFURT ELECTRONIC BSM 720 ( BSM720 ) New ! Dimensions: 300 x 200 x 60 mm
Hybrid stepper motor with brake and encoder BAUTZ L32RFD-BSN-NN001 Holding torque: 4.8 NM Current bipolar: 6 A shaft: Ø 10 mm New ! Dimensions: 170 x 86 x 86 mm
Measuring cylinders HYDRAULIK-ELEMENTEBAU FREIBERG WMZ160-107-40/28/95/-206/B1/BS07. AP06/S51 with displacement transducer BALLUFF BTL5-E10-M0100-B-S32 Measuring distance: 100 mm and directional control valve HOERBIGER PSL 600 PC06 P06 B1 used, tested ! Dimensions: 460 x 130 x 200 mm
Electric stacker DOOSAN BSF16N, built in 2022, load capacity 1600kg, lifting height 2500mm, SN: OBWNE-000290, charger, purchased in 2022 for 7,499 EUR net, BW 31.05.23 6,796 EUR net, return on the 2nd pick-up day only possible from 14:00 - is still needed for goods issue.
Technical data Machine Type: Automatic punching machine Manufacturer: Bruderer AG, Switzerland Model: BSTA 40 Year of Make: 1978 Compressive force: 40 t Stroke rate: 50–1200 strokes/min Stroke adjustment: 13–57 mm (stepped) Tool installation height: 452 mm Tool installation height adjustment range: 60 mm Outlet columns (longitudinal): 210 mm Outlet columns (transverse): 680 mm Clamping surface at the bottom: 680 x 550 mm Clamping surface at the top: 680 x 400 mm Bed opening: 640 x 220 mm Strip running height: 60–140 mm Configuration Feeder: BBV 200/120 Max. belt width: 200 mm Max. strap thickness: 6 mm Feed length: 0–120 mm Soundproofing booth: DRIVER FKE 500/110BM (YOC 03/2001) Tool monitoring: SIEGFRIED Press-Processor SPP 450 Auction-ID: A1-45711-319
Vacuum pump Moror power 5.5KW see pictures Condition: unchecked (6) Auction-ID: A7-45761-785
net packing machine; equipped with \"NEWLONG\" industrial sewing head; type DS-9P; strap length approx. 3800 mm; Belt width approx. 325 mm; equipped with movable filling opening Auction-ID: A1-43573-92
net packing machine; v.v. \"FISCHBEIN\" industrial sewing head; type 100; tape length approx. 3000 mm; Belt width approx. 325 mm; equipped with movable filling opening Auction-ID: A1-43573-93
Unused machine, working width 150mm Auction-ID: A1-45188-77
Upgrading of the electrical system carried out in 2019. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Quadro dimensions: 1400 x 500 x 2400 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-728
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-729
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-730
Upgrading of the electrical system carried out in the 90s by BRUDERER. Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Dimensions of the Painting: 600 x 700 x 2400 approx. mm Capacity: 25 Ton Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-731
Redevelopment of the electrical system carried out in 2017. Press table dimensions: 530 × 540 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine using measuring instruments and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-723
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-726
Press table dimensions: 530 × 530 mm approx. Clearance between shelves: approx. 220 mm Machine dimensions: 4200 x 2200 x 3500 mm approx. Capacity: 25 Ton Power: 20 kW Strokes per minute: between 875 and 1500 Warning: the information reported has been taken on board the machine and may not correspond to the actual performance. For further information, on-site inspection is suggested. The item is sold in the state in which it is, unverified and without warranty of operation. Item not subject to sales restrictions. Auction-ID: A7-45448-727
Line has got 2 throughfeed drilling machines Weeke 1st drill Weeke BST30/25, N? 0-259-05-3283-01-0810, 1992 Equipment: 2 x hor. Units, split drilling blocks, each with motor 1,8 kW, 13-spindle drilling blocks, centers 32 mm 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm, width 200 up to 800 mm, thickness 12 up to 40 mm 2nd drill Weeke BST30/25, N? 0-259-05-3284, 1992 Equipment: Machine prepared to take 2 horizontal units at later date 6 x bottom unit, split drilling blocks, each with 1,8 kW motor vertical blocks swivelling 360? Min/max motor centerdistance: 160 - 576 mm Min drilling unit center distance: 192 mm Preselection for automatic cycles Panel sizes, length 250 up to 2500 mm, ...
This Eisele Waterpump BSD442, Can be used for the emptying and cleaning of pits, ponds, mine shafts and similar tasks,, for reducing ground water, pumping out water ballast from ships, on building sites, in, stone and gravel quarries and building material works., For municipalities and industrial concerns., , Throughput capacity: 100 m3/h, Max dirt passage: 19 mm, Max. head: 6 MWK, Max dirt passage: 1750 rpm, Weight: 1600 kg, , = More information =, , Year of manufacture: 1999, Applicable material: Water, Empty weight: 1.400 kg, Connector size: 4 inch, Technical condition: good, Visual appearance: good, Price: On request, Please contact Gert-Jan Kruitbosch (+31648061001, sales@vantongerentrading.nl) or John van Tongeren (+31620537017) for more information, , = Dealer information =, , Interested? We would be happy to make you an excellent offer! Send an email to sales@vantongerentrading.n ...
The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1999, Empty weight: 450 kg ...
The Eisele BSE740 EX Explosion-proof is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 2016, E ...
The Eisele BSE740 is a self-priming, electric pump unit with a capacity of up to 130 m³ per hour, , designed for pumping dirty water, sludge, bentonite, and slurry. The pump has a motor power of 5.5 kW, , operates on a 3-phase 400V, 50Hz power supply and can operate under a maximum pressure of 20 meters water column (mwk)., , Below are some important specifications and applications:, , Specifications of the Eisele BSE740, Type: Eisele BS740, Maximum pressure: 20 mwk, Flow rate: Up to 130 m³/h, Motor: 3x 400 V, 50 Hz, 5.5 kW, , Applications: sewage, sludge, bentonite, slurry, Use: suitable for dirty water pumps, industrial use, water management, and salvage projects., , Throughput capacity: 130 m3/h, Max dirt passage: 15 mm, Motor brand: Euromotori, Max. head: 20 MWK, Max dirt passage: 1500 rpm, Weight: 400 kg, , = More information =, , Year of manufacture: 1995, Empty weight: 450 kg ...
Bezner Siebmaschine | Flat screening machine type BSM-50/1750W reinforced version Screening machine especially for the use of mixed construction site waste (commercial waste, mixed construction waste) used, very good condition - Make: Bezner - Type: BSM-50/1750W - Year of construction: 1995 - Condition: very good condition (used) - Screening capacity: up to approx. 50 - 70 m³/h (for mixed construction waste (commercial waste, mixed construction waste)) - Screen area: approx. 6.0 m² (approx. 2.25 m² for D = 8 mm // approx. 2.25 m² for D = 25 mm // approx. 1.5 m² for D = 60 mm) - Fractions: 4 Crswvwqsw I E H Rsy Eog - Screen decks: 1 piece - Drawer side: up - Drive power: 5.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 7,800 kg - Machine colour: RAL 2001 red-orange Suitable for screening the following bulk materials, among others: - Constr ...
Collating machine Bourg BST-10 Two variants: 1. c.p. bourg BST-10 two towers + BDF 2. C.P. BOURG BST-10 A Tower + BDF Art.Nr. PS6044
Booklet Maker / Broschürenanlage CP Bourg BSF - BCM-e - BM-e Speed max. 5000 booklets/hour Grammatur / Paper weight 60 - 350 g/m2 Papierformat / Paper Size min. 119 x 1180mm - max. 370 x 600mm Broschürendicke ((mit Heften-Falzen-Schneiden) / Booklet thickness 2-30 sheets of 75gsm Kopf-/Blockheftung / TOP/side stitching: Papierformat min. 119x170mm - max. 370x300mm Broschürendicke / Booklet thickness 2 - 55 Blatt 80 g/m² Falzen/Frontbeschnitt / Folding/trimming: Papierformat min. 119x170mm - max. 370x300mm Broschürendicke / Booklet thickness 2 - 55 Blatt 80 g/m² Frontbeschnitt / Face trimming 0 to 25 mm (0 to 0.98 in) Bogenanleger Bourg BSF für Offline- und Inline-Verarbeitung Sheet Feeder Bourg BSF for Off-Line and In-Line finishing Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On St ...
Wet belt grinding machine EDERTAL BSM 200 The Edertal wet belt sander is ideally suited for sharpening knives, hatchets, cutter knives, axes, etc. The wet grinding ensures a long service life of the cutting edges, as annealing of the blades is hardly possible. In addition, the permanent water cooling achieves an optimal and permanent sharpening result. The BSM 200 grinding machine is a compact, robust and high-quality grinding machine that is made entirely of stainless steel. The sanding belt attached to the right side is tensioned and aligned by a stable clamping device. On the left-hand felt disc, in combination with a polishing paste, the ground tools can be tightened and deburred. The design and the material used comply with the hygienic and occupational health and safety requirements as well as the EC directives. Specifications: Power supply: 230 V Input power: 3 ...
This Eisele BSD304 is a powerful, electrically driven wastewater pump, designed for reliable use in industrial and construction applications., Thanks to its robust construction and high pumping capacity, this model is ideal for pumping contaminated water, sludge, and liquids containing solids., The pump is driven by a 400V electric motor and combines durability with energy efficiency., The cast iron housing and corrosion-resistant components ensure a long service life, even with continuous use in harsh conditions., , Key features:, , Voltage: 400V (three-phase), Pump type: Centrifugal, wastewater, Suction head: up to approximately 7 meters, Delivery head: up to approximately 20 meters, Pump body material: wear-resistant cast iron, , Suitable for: construction sites, sewage work, agriculture, and water management, , Easy to maintain and ready for immediate use, , The Eisele BSD304 is a re ...
This 4-axis Fidia K 165 BSH was manufactured in 2002. It features a PCN775 control unit and a main spindle with a speed range up to 30,000 rpm. The machine dimensions are 3723 mm in length, 3750 mm in width, and 3370 mm in height, supporting a maximum table load of 2000 kg. If you are looking to get high quality milling capabilities consider the Fidia K 165 BSH machine we have for sale. Contact us for more information.
This BRUDERER BSTA 25 was manufactured in 2007. A high-speed precision stamping press, it features a vertical main ram for precise stamping and a horizontal feed mechanism for workpiece positioning. Ideal for sheet metal forming, stamping, pressing, and metal shaping, it operates at high speeds with computerized control. Compact design ensures space-saving installation. Consider the opportunity to buy this BRUDERER BSTA 25 metal press. Contact us for more information.
maximum number of results exceeded
please refine your search
15.800 € 
