bs used for sale

Collating machine Bourg BST-10 Two variants: 1. c.p. bourg BST-10 two towers + BDF 2. C.P. BOURG BST-10 A Tower + BDF Art.Nr. PS6044

Drilling capacity steel/GG: 23 mm Spindle holder: 3 MK Projection: 275 mm Table size: 300 x 400 mm Quill stroke: 90 mm Spindle speeds: 100 - 1180 rpm Feeds: 0.1/0.6/0.25 mm Drive motor: 380 V, 1.25/2.15 kW Dimensions: 850 x 400 x 1770 mm Weight: 280 kg

ARO PD30A-BSS-STT-C Stainless Steel Double Diaphragm Pump The ARO metallic 3" diaphragm pump models achieve flow rates of up to 1041 L/min. and are available in a variety of materials. These pumps are often used in industry for transfer, filling and recirculation. Diaphragm pumps of the EXP series impress with the best total cost of ownership and offer an optimal solution in terms of energy efficiency and downtime. Example media for PD30A-BSS-STT-C: Highly flammable liquids, mineral oils, varnishes, solvents, acids, alkalis, cleaning agents, wastewater and much more. Suction and Discharge Connection: 3" BSP Max. flow rate: 1041 L/min. Max. operating pressure: 8.3 bar ATEX certified: Yes Material medium side: stainless steel Air motor material: aluminium Membrane material: PTFE / Santoprene Material ball: PTFE Material ball seat: stainless steel Max. solids size: 9.5 mm  ...

Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 – 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German. More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Bezner Siebmaschine | Flat screening machine type BSM-50/1750W reinforced version Screening machine especially for the use of mixed construction site waste (commercial waste, mixed construction waste) used, very good condition - Make: Bezner - Type: BSM-50/1750W - Year of construction: 1995 - Condition: very good condition (used) - Screening capacity: up to approx. 50 - 70 m³/h (for mixed construction waste (commercial waste, mixed construction waste)) - Screen area: approx. 6.0 m² (approx. 2.25 m² for D = 8 mm // approx. 2.25 m² for D = 25 mm // approx. 1.5 m² for D = 60 mm) - Fractions: 4 Crswvwqsw I E H Rsy Eog - Screen decks: 1 piece - Drawer side: up - Drive power: 5.5 kW - L x W x H: 7,000 x 3,540 x 2,700 mm - Machine weight: approx. 7,800 kg - Machine colour: RAL 2001 red-orange Suitable for screening the following bulk materials, among others: - Constr ...

Paper vibrator with spreading rollers Baumann BSB 3/L, year of construction 1988, serial number 210277, in good condition, immediately available If you are interested, we will also be happy to inform you about other machines in our company. You are welcome to visit the machine in our house by prior appointment.

Brand Lisec Type BSV-45 Fashion model Frame Bending Machine Chassis number 154.11.10.10.0792 Construction year 1992

PTC thermistor relay, contactor, semiconductor contactor, contactor -Type: PLC-BSC-24DC/21-21 -Number: 10x relays available -Price: per piece -Weight: 0.07 kg

Gear motor, electric motor, three-phase motor -Speed: 65/78 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 305/170/H195 mm -Weight: 7.6 kg

Thread cutting dies, replacement thread cutting dies, thread cutting head with Strehler dies, thread cutting die, thread cutting machine, pipe thread cutter -Manufacturer: Ridgid, Thread cutting die set, unused, original packaging -Type: 3/4 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1 kg/set

Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Pneumatically adjustable angle between 45° and 90° Pneumatic material tensioners Suction Max. saw blade diameter: 500 mm

BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm. More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Stapelwender / Pile Turner Baumann BSW 2-500 Year 1998 - Serial-No. 7356 Bogenformat / Sheet Size max. 550 x 750mm Stapelgewicht / loading capacity max. 500kgs Innenmaß Plattform / Interior platform size 620 x 940mm Öffnungsweite Plattform / Opening of platforms min. 460mm - max. 1220mm Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Threading dies, replacement dies, threading head with chaser dies, threading stock, threading machine, pipe thread cutter -Manufacturer: Ridgid, thread dies set unused original packaging -Type: 1/2 BSPT -Number: 2 sets available -Price: per set -Weight: 0.1kg/set

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Benzlers, gearbox type BS40 -Translation: 15 : 1 -Shaft: Ø 20 x 50 mm / see photos -Dimensions: 270/145/H140mm -Weight: 4.3 kg

Mechatronic drive system, gearbox, spur gear, angle gear, worm gear, Movigear -Manufacturer: Benzlers, gearbox type BS40 -Translation: 15 : 1 -Shaft: Ø 20 x 50 mm / Ø 14 x 25 mm -Dimensions: 147/148/H140mm -Weight: 3.5 kg

pressure: 20 t stroke: 8-38 mm no. of strokes: 100-1800 Hub/min table surface area: 400x400 mm table pass: 380x80 mm table height: 1000 mm weight of the machine ca.: 4 t dimensions of the machine ca.: BxTxH 1600x1600x3100mm m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Base plate, construction fence base, barrier base -Quantity: 16x made of plastic -TL-Footplate -K1 Dimensions: 800 x 400 mm -Insert pockets: 40 x 40 mm, 60 x 60 mm, 2x Ø 42 mm -Suitable for: shaft pipe, construction fence or barrier fence

geared motor, electric motor -Speed: 140 rpm -Power: 0.37 kW -Design: B5 angle -Shaft: Ø 20 mm -Brake: 24 V Protection rating: IP65 -Quantity: 6 available Price: per piece -Dimensions: 460/180/H250 mm -Weight: 15 kg

geared motor, electric motor -Speed: 35 rpm -Power: 0.18 kW -Design: B3 angle -Shaft: Ø 20 mm -Protection class: IP 65 -Quantity: 4 available Price: per piece -Dimensions: 330/180/H150 mm -Weight: 8 kg

Control Card / Plug-in Circuit / PCB Board for Bobst Alpina 110 II matic. Control card / plug-in circuit / PCB board for Bobst Alpina 110 II matic. BSA0701239601

geared motor, electric motor -Speed: 72 rpm -Power: 0.25 kW -Design: B14 angle -Shaft: Ø 20 mm -Protection class: IP 65 -Dimensions: 320/200/H220 mm -Weight: 9.5 kg

geared motor, electric motor -Speed: 50 rpm -Power: 0.12 kW -Design: B5 hollow shaft -Shaft diameter: Ø 14 mm -Protection class: IP 54 -Weight: 6 kg

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Machine dimensions: 1300/640/H1115 mm -Weight: 344 kg

Hacksaw, hacksaw machine -Manufacturer: Kasto, hydraulic mobile bow saw with coolant system -Type: BSM 253 -Power: 1.5 kW -Cutting speed: 3 levels -Max. cutting height: 205 mm -Max. cutting width: 255 mm -Clamping stock: swivels 45° -Saw blade: Length 400 mm -Machine dimensions: 1300/640/H1115 mm -Weight: 344 kg

Printed circuit board 734 QI (PCB) / control PC with integrated touch display on the insert, for Bobst Alpina 110 II matic. PCB Printed circuit boards 734 QI / control PC with integrated touch display on the feeder, for Bobst Alpina 110 II matic. Manufacturer numbers and replacement numbers: BSA07230000BW / BSA07230000BT / BSA07340000TH

with air blower min. opening width: 600 mm max. opening width: 1400 mm max. stacking weight: 1.000 kg with protective grid

frequency: 50 Hz voltage: 380 V : 220 V connected load: 2,6 kVA rated current: 6,1 A weight of the machine ca.: 1 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Press capacity: 50 ton Ram stroke adjustable: 16 - 51 mm Slide adjustment: 64 mm Free frontal opening L-R: 1100 mm Free lateral opening F-B: 250 mm Table surface area : 1080 x 650 mm Slide area: 980 x 420 mm Hole in table: 1060 x 200 mm Number of strokes: 100 - 750 s.p.m. Required power: 22 kW Working hours machine: 16850 h Height over floor approx.: 2471 x 1278 x 3150 mm Weight of machine approx.: 9 ton

Decoiler Coil weight: 4,5 ton Material width max.: 520 mm Coil exterior diameter: 1600 mm Expansion range: 460 - 530 mm Leveller / Straightener Material width : 20 - 400 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pull out rolls: 4 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 3,5 mm Feeding speed: 2 - 10 m / min Roll feeder Material width max.: 310 mm Material thickness: 3,0 mm Material thickness at max. width: 2,8 mm Material thickness at max. cross section: 850 sq mm Number of feeding rolls: 2 pcs. Diameter of feeder rolls : 80 mm Feeding speed: 104 m / min Required power: 1,5 kW

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer: Böhl, Type: BSB-80-SX , Year: 1997, Control: Siemens, Work piece width min-max mm: ca 50-730, Min.-max. workpiece length in mm: 750, Rollendurchmesser-min-max mm: 800, Max. roller weight kg: 6, Automatic product recording: yes, Sealing unit: yes, Belt width: max.125, Belt tension adjustable: yes, Function repeat: yes, Feeding belt L x W x H mm: ca.4500, Year :1997

Manufacturer: Weeke, Type: BST 50, Year: 1992, Program-controlled: yes, Work piece width min-max mm: 100-1050, Min.-max. workpiece length in mm: 350-2600, Min.-max. workpiece height in mm: 10-60, Lochraster: 32, Drilling engine kW: 1,2, Working range max mm: 60, Drilling support horizontal: 2, Drilling supprt from bottom: 6, Drill support from top: keine, FREE TEXT: inkl Bohrhetriebe, Year :1992

Item condition: well-maintained Availability: immediately Description: see attached data sheet Capacity: 90 kg/h Machine weight approx.: 137 kg Volts/ Heart: 230 / 50 Overall length: approx. 990 mm Total height: approx. 660 mm

An on-site inspection is possible.

sehr schöne Tischbohrmaschine von IXION BST 13 very nice Drilling machine IXION BST 13 Tischbohrmaschine / Drilling machine IXION BST 13 Baujahr / Year 1971 - Serial-No. 37919 Abmessungen / Dimensions 220 x 400 x 820mm Gewicht / Weight 50kgs

Bucket with tilting function for forklift trucks BAUER type BSM 90Forklift bucket, tipping bucket, snow shovel, chip bucket, dump bucket, tipping containerFabr. No. 4421 Year of construction 1983Load capacity: 1500 kgVolume: 0.9 m³Bucket width: 1570 mmBucket depth: 1200 mmBucket height: : 550 mmDrive-in pockets: 120 x 70 mmTine spacing inside/outside: 500/740 mm- mechanical dumping device- forklift entry pockets with openings for the forks in the cargo area- orange painted with slight rustingWeight: 275

The positions of the rotating tools are: T01-02-03-04 / T22-23 / T34-35 - equipped with Iemca Boss 332E/32 new in 2006 - lot of collets / guide bushes - MSC-501 Control - the machine has always worked with oil.

FOR SALE: BRUDERER BSTA 50USL High-Speed Stamping Press With Automatic Strip Feeder BBV 190 500 kN | 100–1120 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 500 kN Stroke rate: 100–1120 strokes per minute Working hours: 41000 h Main motor: 22 kW Control voltage: 24V DC Power connection: 400V / 50Hz / 62 kVA Adjustable stroke: 16 / 19 / 25 / 32 / 38 /44 / 51 mm Shut height adjustment: 64 mm Working Dimensions: Max tool installation width: 1100 mm Strip pass width: up to 256 mm Ram area: 980 × 420 mm Table area: 1080 × 650 mm Strip entry height adjustable: 60–140 mm Max strip width: 120 mm Max feeding pitch: 85 mm Max material thickness: 4 mm Feeding angle: 180 Deg Machine Dimensions (with BBV 190): Machine footprint (L × W × H): 2407 × 1278 × 3150 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 1 ...

SUB: FOR SALE... CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY HAVE A GDY SIR WE VE 1 PC USED CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY TYPE BSP-2 NO. 463/204 DATA 3X 440V 60HZ IT WAS USED VERY LESS HOURS IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY