broaching machine used for sale

overhauled in 2006 after overhauling only 100 workinghours Available: sofort

8 color size 70 x 100 cm<br><br><br><br>Available: immediately

size 740 x 1040 mm<br><br><br><br>Available: short term

overhauled in 2007 spare parts Still in operation: Yes Available: sofort

Tip height over bed top distance of 200 mm 1000-1500 mm Permissible diameter on bed 400 mm Permissible diameter on sled 230 mm bed Bed width 280 mm head Spindle passage 52 mm 6ʺ camlock spindle nose Speed Spindle speed 16 n. Values 36-2000 RPM. Feeding and tapping 72 longitudinal feed 0.05-4.45 mm / rev 72 cross feed 0.025-2.25 mm / rev 54 Whitwort Division 1-56 TPI 54 metric pitch 0.5-28 mm 54 English Division 1-32-1ʺ inch 54 Division of modular 0.25-14 mm 54 pitch Division 2-112 D.P.. Cross slide 470 mm Width 180 mm Maximum stroke 235 mm Cross slide Length 260 mm Width 120 mm Maximum stroke 150 mm Slewing range 360 degrees Counter tailstock Hollow shaft diameter 58 mm Hollow shaft length 265 mm Maximum stroke hollow shaft 120 mm Cone of the hollow shaft 4 C.M.. - MK Motor Power 4 kW

3-color R23501/15 HOLWEG flexo printing machine model: Colorado age: 1971 available: short dated 3 printing units printing width: max. 100 cm Secare – reel rewinder Available: nach Absprache

Control SIEMENS 805 TECHNICAL DATA: WORK AREA / DIMENSIONS Swing over bed [mm] 820 Swing over facing slide [mm] 515 Displacement of the plan slide [mm] 520 Displacement of the upper support [mm] 250 Turning length [mm] 2000 Tip height on flat railway [mm] 400 Bed width [mm] 560 Bed sleigh length [mm] 800 Facing slide width [mm] 320 Plan valve length [mm] 1005 Upper support width [mm] 200 Turning tool cross section according to DIN 770 hxb [mm] 40 x 25 MAIN SPINDLE Spindle nose according to DIN 55 027 [Gr.] 11 Spindle diameter in front bearing [mm] 170 Spindle bore [mm] 128 Inner taper of main spindle [metr.] 136 MAIN drive infinitely adjustable three-phase motor (AC motor) Power 60% / 100% ED [kW] 46/37 Torque max 60% / 100% ED [NM] 5,300/4.260 Torque max 60% / 100% ED [NM] 5,300/4.260 Total speed range [min-1] 6.3 1,600 Transmission levels 2 Speed rang ...

Model CAR-T5 is a reliable, totally mechanical cartoning machine for different types of products and very versatile. The robust construction of the whole system allows the production with almost all types of cardboard. The machine comes with the automatic bottle feeding system. The size change is simple and fast, adjustable with the handle and easy to maintain. The cartoning machine is built with state-of-the-art technology and is very robust. The application area of the cartoning machine is almost unlimited. This model is used worldwide in the pharmaceutical, cosmetic, chemical and food sectors. Technical data: Production: 120 cartons/min handling: intermitent carton measurements (A x B x H): Min. 20 x 16 (12) x 60 mm max. 95 (105) x 70 (80) x 200 (205) mm Electrical consumption: 4 kW Power: 9.5 kVA Compressed air: 9.5 m³/h 6 bar.

Horizontal cartoner with continuous movements with leaflet folder GUK , bar code reader Leatus and coding unit . Product for which it is equipped: PVC trays with ampoules Material of machinable cases: Compact carton with a weight of 220 +/- 400 gr / m2. Cords and pre-attached cases. Clousere: Tuck Automatic trays feeder . Electrical Trifase altering 220 or 380 V 50Hz Motor power 3 Kw Motor power vacuum pump 1.25 Kw Power transformer and service circuits 0.95 Kw Total power 5.20 Kw Air consumption Absorbed 17NL per minute at a pressure of 6 bar Mechanical speed : max 260 per minute Format range A 20 - 160 mm B 12 x 70 mm C 70 x 230 mm

Automatic Horizontal Cartoner Marchesini MA 352. Continuous motion horizontal cartoner, suitable for high speed packing in cartons of small bottles , vials , drops . Entirely built with a balcony structure, this machine?has all features and advantages of Marchesini cartoners: carton magazine in an optimum position, maximum accessibility, extremely fast change-over times,?minimal maintenance. Possibility of collecting the various rejects (product, carton, leaflet) in different containers, allowing improved recognition and control of the rejected items and easier, safer handling of rejects. General features: Balcony construction fully compliant with GMP standards ?All feeding units located in ergonomic positions. ?Mechanical parts in an oil bath to reduce maintenance and limit noise ?Reliable and fast ?Simple, fast size change-over, can be performed entirely from the machine front ?Touch S ...

The Cartoner C 2205 belong to the continuous cartoners for the exible packaging of small and medium sized batches. Convincing attributes include the GMP and pharmaceutically compliant cantilever design with V2A stainless steel lining of the inner surfaces, the modular structure for subsequent upgrading of separate stations, as well as the consistent separation of the drive elements and operating assemblies. Thanks to the patented carton feeders TwinStar and TriStar, the cartoner offer uniform top quality and productivity – not only under ideal production conditions but also when cartons of critical quality are processed. The 5 pitch Cartoner C 2205 is designed for a maximum output of 250 cartons/minute with an option of up to 300 cartons/minute. The machine packages blisters, ampoules . Technical details : Max Output 250 cartons per minute Pitch 5” Max carton size (AxBXH) 100 x 90 x  ...

Picker Rad View--Tomo with the following device components: generator Rad View 65 tube Dunlee DU 304 C004-30 0,6/1,2_year of manufacture 2004 vertical stand Pausch • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipment in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • The sales take place as "used" to resellers or distributors, despite full functionality without warrenty/guarantee. • Installation and commissioning must only be performed by specialist staff with the appropriate qualifications.

Year 1996, CE norm, complete instructions, control Delem, machine in TOP condition with warranty, more details on request

SACMI line for plastic caps. Perfect condition.

Molding machine of Mag Type: Ergotech 420/800-3300 system control: NC 4 year: 2000 Clamping unit Clamping force t 420 gap mm: 710 Holm dimension mm: 810 x 710 min/max height mm: 820 / 940 Plate size: 1200 x 1100 injection unit Screw diameter mm: Gr 80 injection weight: 1600 Injection volume cm 3: 1779 spray pressure bar: 1855 Dimensions and weights Dimensions Lxwxh m: 7.8 x 2.2 x 2.4 machine weight kg: 21000 Miscellaneous 4 core EUROMAP 12

Molding machine of Mag Type: Ergotech 250-1450 system control: NC 4 year of construction: 1996 Clamping unit Clamping force t Gap between 250 mm: 575 Holm dimension mm: 560 x 560 min/max height mm: 660 / 760 Plate size: 830 x 830 injection unit Screw diameter mm: Gr 70 injection weight: 940 Injection volume cm 3: 1039 spray pressure bar: 1400 Dimensions and weights Dimensions Lxwxh m: 5.7 x 1.7 x 2.2 machine weight kg: 11200 Miscellaneous 2 core EUROMAP 12

Format (cm): A3 pockets: 4 Sword: 1

Molding machine of Mag Type: Ergotech 100-430 system control: NC 4 year of construction: 1999 Clamping unit Clamping force t 100 gap mm: 500 Holm dimension mm: 400 x 400 min/max height mm: 250 / 750 Plate size: 590 x 590 injection unit Screw diameter mm: Gr 40 injection weight: 205 Injection volume cm 3: 231 spray pressure bar: 2020 Dimensions and weights Dimensions Lxwxh m: 4.4 x 1.4 x 1.8 machine weight kg: 4400 Miscellaneous EUROMAP pull 12, 1 core

SACMI line for one and for two component caps, with control video system.

Bearing number: 3421 CNC LATHE Manufacturer: Haas, Type: TL 25HE Machinen NR.: 70403, built: 2005 Specifications: Max. turn. about 760 mm dia. Max circulation diameter 405 mm dia. Turning length 860 mm Spindle bore 70 mm dia. Main spindle speed range 3400 rpm C Axis - Main spindle movement 0.001 degrees Main motor power 22 kw Tool turret with 12 stations Counter-spindle Counter spindle speeds 4000 Pr/min Operating hours Spindle 9750 hours Accessories: collet device. Materials feed 65 mm Parts Catcher Cooling water system. Chip promotion. Various accessories. Length: 2000mm, Height: , Width: 2100mm, Weight: 8000 Kg

Performance: 30 000 b / h

Central printing press cylinder Print width 1270 mm Roller width 600-1310 mm Processing 1000 mm Winding 1000 mm

Belt/ozilierend swiveling Roll in the table

Working length: 1,800 mm equipped with: -2 drilling units with three drills -Insertion device for pot hole hinges -2 Bohraggregte for hinges, etc.

Working length: 3.200 mm Machine is equipped with: -3 drilling units from below with 3 spindle-head - 2 holders from above -1 pressure cylinder on the side The control was by the customer through a control, serial: Siemens,. newer built; replaced.

Technical data: maximum sheet width: 3000 mm maximum plate thickness at maximum yield of 240 N / mm² on bending: 35 mm On bending length: 2,2 x S Diameter of roller upper roller: 552 mm Bottom roll: 532,4 mm Side rolls: 400 mm

Bread cutting machine with cutting width adjustment of Wäbama type Circumat.The machine runs without oiling, with round knife and digital control.Suitable to cut breads up to 38cm wide.Right tray is inserted then the loaves are moved by means of sliders to the left Pushed. In the middle between left and right tray the knife rotates and cuts the bread in the desired thick. The cut discs are pushed into the left compartment where they are straightened medium disc holders. After cutting, mam can take out the slices and bag them on the icing rail. Easy operation and cleaning of the machine, little space requirement.Payment and shipping on request. Wabäma Circumat Bread Cutting Machine Circular knife machine Cutting width adjustable Current type three-phase current Operating voltage 400V Control voltage 24 volts Rated current of the machine 1.9 A Insurance in the supply line  ...

Grinding wheel flange for Kellenberger / Strausak u.-Miwatec grinding machines type 57 U / W in special design. Questions us please at we do extensive accessories for these machine types.

used ilapak Delta G E horizontal bagging machine with running sealing jaws. The machine is mainly used for the production of sealing packages and protective fumigation to extend the durability of various products. The machine requires electricity, compressed air and, if necessary, water. The system can be seen in the photos without a transport table, but of course there is also the transport table. The total length of the machine is about 6400mm depth is 1160mm and height 1550mm plus labeler. The labeler is from Werner Hermann.The packaging machine is about 1600 kg heavy. Until recently, small cartons of Berliners were packed at the plant. The plant is complete and ready for loading in our warehouse in Bielefeld. Payment and shipping on request. 380 Volt Connection 50 Hz 6500 watts Weight approx. 1600 kg incl. labeler

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Wheels shot 38 mm. For more details please call us. We carry special accessories in our program. We repair and repaired on the spot and make complete engine overhauls Special grinding machines

Grinding wheels recording for Kellenberger / Strausak u.-Miwatec grinders. Grinding wheel holder for 76 mm bore. More technical info. on request.

Reduction sleeves for work piece headstock recording MK 5 Reduction MK 5 / MK 1 MK 5 / MK 2 MK 5 / MK 3 MK 5 / MK 4 Reduction sleeves with forcing nut. Price indication per piece. We carry new & - used Center points in special dimensions.

1 AUTIMAK folding and bagging machine type M-300, year 2011 (machine has never been intensively used and is like new), Compact machine for folding and bagging of textile garments like t-shirts, shirts, scarves, heads, carves, towels, cleaning cloths, etc... Size adjustable from children to adult sizes. It uses standard bags with flap for heat-sealing. Otherwise it can use standard bags with self-adhesive on the flap. Possibility to use cardboard supports. Adjustable folding dimensions and bag size. The bag is heat-sealed with a Teflon protected blade which can seal polypropylene. It has a temperature controller for the heat-sealing blade. Garment counter included. The production is 600 T-shirts per hour with only one worker. It can fold and bag 2 T-shirts at once, doubling production speed. Bag dimensions: 25–30 cm wide x 32-38 cm long.

Uhlmann C2504 continuous motion cartoner, carton size range min. 30x15x65 mm (AxBxH), max. 80x90x155 mm (AxBxH) Blister/tray size range min. 30x3.5x60 mm (LxWxH), max. 75x12x150 mm (LxWxH), suitable for blister count from 1 - 12 blisters per carton, Leaflet/Booklet feeder (leaflets/booklets are automatically taken from their carton/trays and placed into the infeed system), the machine is also prepared to accept a GUK leaflet folder and feeder. Includes Wolke m600 advanced inkjet printer for variable data and codes, set up for reverse tuck cartons with Nordson PROblue 4 hot melt glue system for tamper evidence. The cartons discharge though a Pago Pagomat 6/2 labeller for top labelling (vignette/bollino) Electrics 400 V/230 V/50 Hz, 20 A, connected load 10kW Compressed air 6-10 bar Machine footprint ca. 7289 x 2041 mm (LxW) Height ca. 2254 mm Machine nett weight ca. 8000 kg Output u ...

Baader 201 Violet Machine Violet machine for large cod and red fish Released: 1997-1998 Condition: excellent The machine is designed to produce standard fillets from gutted and decapitated large fish without shoulder bones. Processed cod, salmon, tuna. Equipped with a functional device for laying fish, large knives scraping rib bones, as well as guides, providing a high output of evenly cut fillets. Due to its compactness, the Baader 201 can be mounted on ships. It is possible to connect the skin-removal machine. Performance: 10, 18 or 20 fish/min clocked Working range: Atlantic cod - 50-120 cm (max. 13 kg); Cod Pacific - 54-108 cm (max. 13 kg); side - 60-120 cm (max. 12 kg), salmon - max. 9 kg, tuna - 4.5 - 9 kg. Power consumption: 4.5 kW Water consumption: 16 litres/min Dimensions: 4.70 x 1.67 x 1.45 m Mass (net/gross): 1800/2230 kg

Baader 142 - The Ripper Machine for vacuum evisceration of salmon, trout Released: 1998, 1999 Condition: excellent This Baader 142 machine is designed to eviscerating salmon, trout weighing from 1.3 kg to 11 kg (head or without). The fish being processed is loaded into the machine by hand. A strong clip captures the carcass from the tail for further transportation. The fish is then measured using electronic sensors to help determine the location of the cut. The cutting mechanism is controlled by sensors and the computer, it produces a careful, symmetrical cut, which does not affect the insides. The insides are removed by means of a vacuum device. Processed fish weighing from 1.3 to 11 kg Performance: 16 fish/min Vacuum pumps and waste tanks included

We give our wheel bearing. Vitrified bonded grinding wheels for metal processing. From 100 mm to 600 mm in diameter. We carry also diamond and CBN wheels for tool grinding machines new and used. Strausak Fleximat 91 we have yet complete disc sets for all common diameters for the machining of solid carbide and HSS milling and drilling tools. Price and info. on request.

We give our wheel bearing. Ceramic grinding wheels of different binding and hardness. Dimensions von75 mm to 600 mm. The discs are new, unused, and undamaged. Retail possible, price on request.

Longitudinal stroke max. approx. 680 mm Transverse stroke Max 250 mm greatest distance spindle Center to table top approximately 525 mm Magnet size approx. 600 x 200 x 90 mm Disk size 300 x 50 x 76.2 mm Speed infinitely variable 1000--3000 U/min Dimensions, B x T x H approx. 3.2 x 1.8 x 2.5 m Spindle motor approx. 2.8 8.4 kW Weight of the machine CA. 3,3 tons Facilities: -with automatic vertical delivery -Roughing, Wiles, from fires and lifting by the adjustable potentiometers -Loading position is approached after slipping automatic -Rapid traverse across approx. 1.2 m/min via electric motor -Labour / rapid traverse along approx. 5 mm / min 40 m/min with servo motor and toothed belt drive -Rapid traverse vertical approx. 0.2 m / min -Digital display for lateral and vertical axis -Quick lifting system approximately 180 strokes / min -Straight electric, dresser with size and speed comp ...

We have a very wide range of accessories for Kellenberger - Santiago &-Miwatecmaschinen. Grinding wheel flanges new u. - used. Chuck flange recordings MK 5 SK 50 for magnetic Chuck, three & four-jaw Chuck. Running with Center points, and fixed. Three-jaw four-jaw &-special Chuck. Magnetic clamping plates, cross - ring - Sternpolteileung. Truing devices, RADIUS &-inclined dressing Lynetten 2 & 3 jaw

Handtmann VF 50 vacuum filling machine for filling, portioning, linking, MC-control, filling capacity up to 2,600 kg/h, pressure up to 55 bar, 420 port./min, portioning from 5-100.000 g., with linking device. The machine is currently in the refurbishing and can be tested in Koblenz, Germany.

Engine power: 400V 3 KW 4 HP, 2 engines Formatschiebetisch: 1500mm Cutting height: 103 mm Blade: swivel, max. 315 mm Milling cutter: starr 90° Blower rpm: Rpm: 1500/3500/6000/8000 RPM. WJ-400100 K NET 2990,-new

Maja Skinny, derinder, with in feed belt, cutting width 434 mm, manual and automatic operation. The machine is immediately available and can be tested in Koblenz, Germany.

Poly Clip SCD 7095 pneumatically operated single-clipper for all artificial and natural casings, bags and nets. The machine is immediately available and can be tested in Koblenz, Germany.

Tipper Tie Technopack TCNV pneumatically operated single-clipper for natural casings, ring-shaped casings, end casings or artificial casings made of collagen, cellulose or PVDC, as well as bags made of polyester, polyethylene or linen The machine is immediately available and can be tested in Koblenz, Germany.

We offer a new Movomatic Tischlängspositionier Setup. The device is new, unused and undamaged. The device is longer years in our camp, we have never used this. It is also can be used with security at other cylindrical grinders manufacturers.

Sheet: 3000x 1500mm Laser: 4000w Auto pallet changer / Extraction