128,999 used machines on RESALE, but how to find them? Machine Search
Transducers, power transducers, active power transducers, analog-to-analog converters, frequency-to-analog converters, frequency dividers, isolation converters, signal converters -Manufacturer: Weidmüller, Signal converter 8795890000 -Type: WAS5 PRO Bridge -Price: per piece -Quantity: 9 pieces -Dimensions: 95/15/H110 mm -Weight: 0.1 kg/piece
A Bridgeport CNC vertical machining center is available. Travel X/Y/Z: 1020mm/510mm/500mm, rapid traverse: 40m/min, feed rate: 10m/min, table dimensions X/Y: 1150mm/490mm, max. table load: 900kg, tool holder: BT40, tool stations: 30, machine dimensions X/Y/Z: approx. 2700mm/2550mm/2450mm, weight: approx. 3800kg. Documentation vorhanden. An on-site inspection is possible.
Table 840 x 420 mm Travel X/Y/Z 600 / 410 / 520 mm, Spindle SK 40, speed up to 60001 rpm, Main drive 8.5kW, Tool changer 22 places Control Heidenhain TNC 370 incl. coolant device
Three older milling machines are available. 1) CNC vertical center Bridgeport VMC 1000/22, year of manufacture: 1999, travel X/Y/Z: approx. 1020mm/510mm/500mm, table dimensions X/Y: approx. 1150mm/490mm, max. table load: 900kg, tool holder: SK40, tool positions: 22, speed: 6000rpm. Machine dimensions X/Y/Z: approx. 2850mm/2200mm/2750mm, weight: approx. 3900kg, control: Heidenhain TNC 410P. 2) CNC engraving and milling machine Paso P700C, year of manufacture: 2001, machine dimensions X/Y/Z: approx. 1650mm/1550mm/2450mm, weight: approx. 1700kg. 3) CNC engraving and milling machine Kuhlmann Prokomat 25S, year of manufacture: 1991, travel X/Y/Z: approx. 700mm/600mm/300mm, table dimensions X/Y: 720mm/700mm, portal clearance X/Y: 800mm/400mm, feed: 6m/min, machine dimensions X/Y/Z: approx. 1600mm/1600mm/2400mm, weight: approx. 1600kg. Documentation available. An on-site inspection is possible. ...
This 3-axis Bridgeport VMC 1000 22 was manufactured in 2001. It features a working area X travel of 1020 mm, Y travel of 610 mm, and Z travel of 610 mm. The machine includes a robust table size of 1150 x 580 mm with a maximum table load of 500 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport VMC 1000 22 vertical machining centre we have for sale. Contact us for further details.
Key data: 762 mm, 630 mm, 610 mm
Inv. Num. : 9118 Type: XT 630 5AX Producer: Bridgeport Created: 2018 Parameters: Control system: Heidenhain TNC 640 Switch-on hours: 26283 h Hours: 13817 h Table diameter: 630 mm Number of axles: 5 pieces Maximum vertical spindle speed: 15000 1/min X-axis travel: 762 mm Y-axis travel: 630 mm Travel travel Z-axis: 610 mm Cone: BT40 Machine weight: 14600 kg
This 3-axis Bridgeport XR 1000 vertical machining centre was manufactured in 2007. It features an X-axis travel of 1000 mm, Y-axis travel of 600 mm, and Z-axis travel of 600 mm. The machine is equipped with a high-speed spindle capable of 12,000 rpm and a side-mounted automatic tool changer with a capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Bridgeport XR 1000 machine we have for sale. Contact us for further details.
x-travel: 800 mm y-travel: 510 mm z-travel: 500 mm control: Heidenhain TNC 370 total power requirement: kW weight of the machine ca.: 3600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 800 mm y-travel: 510 mm z-travel: 500 mm control: Heidenhain TNC410 total power requirement: kW weight of the machine ca.: 3600 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This 3-axis Bridgeport GX 480 was manufactured in 2009. It features an X-axis travel of 480 mm, Y-axis travel of 400 mm, and Z-axis travel of 430 mm. The machine includes a robust table size of 600 x 400 mm and a maximum table load of 300 kg. If you are looking to get high-quality machining capabilities, consider the Bridgeport GX 480 vertical machining centre we have for sale. Contact us for further details.
x-travel:600 mm y-travel:410 mm z-travel:520 mm tool change unit:16 turning speeds:8000 1/min control:SIEMENS 810 shopmill table surface area:840 x 420 mm rapid traverse X- and Y-axis:36 m/min rapid traverse Z-axis:20 m/min taper ISO:SK 40 spindle drive:15 kW weight of the machine ca.:2,5 t space requirements approx. LxWxH:2,2 x 2,3 x 2,3 m vertical machining center, el. handwheel, no chipconveyor, known defect: control starts not 100% special price
Overhead Crane Indoor Crane Overhead Crane Steel Crane 1 t / 20.4 m STEEL EL-A10-20,410 E Year of construction :1999 Load capacity: 1000 kg Lifting height (max. hook travel): 6 m Gauge center (span) : 20,410 m Crane weight complete : approx. 3 t Degree of protection: IP54 Connected voltage: 400 V Control voltage :230 V Works perfectly, carefully removed and packaged, maintained in good condition, regular maintenance and inspection Documents available such as test book, data sheet, technical documentation, circuit diagrams, operation and maintenance instructions Prices: 7,500.00 Euro net + 1,425.00 ( 19 % VAT) = 8,925.00 Euro gross All prices are net including loaded onto trucks VAT reclaimable Shipping possible. Several cranes available in different span and lifting capacity
weight max.: 5 t stroke: 7000 mm clamping width: 10000 mm total power requirement: kW weight of the machine ca.: 3220 kg dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Crane bridge drive, bearing system drive. Sentence. 4 pcs. CIMCORP SLAVEMBR400TP 2 thereof with antrib. SIEMENS / ALPHA 1FT6102-08AH71-4SH1 / TP 110X-MF2-25 -0k1-25 ( 1FT6102-08AH71-4SH1/TP110X-MF2-25-0k1 -25 ) all rolls with cleaning system CLEAN UNIT TSN-P041K Roll dimensions: Ø 350 mm x 110 mm Disc housing: 412251 used, tested ! Dimensions: 1200 x 800 x 500 mm
Load capacity: 2500kg, span: 18,600mm, weight including trolley: 3090kg, operating mode: floor control via push-button pendant, control system: electric, number of crane travel wheels: 4, wheel diameter: 160mm, micro-speed crane travel: 10m/min, crane travel speed: 40m/min, protection class: IP55, brake: disc brake, with crane limit switch, with documentation. An on-site inspection is possible.
Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Friction wheel Demag type: RF180 -Carrier width: 120 mm -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg
Indoor crane, crane, push carriage, crane running gear, crane undercarriage, girder carriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Handover in the current condition as viewed -1x wheel missing (photos) -Friction wheel Demag type: 13/8RF8-2 -Carrier width: 120 mm -for narrow flange beams: IPE240 (120 mm wide) -the chassis are inserted into a steel beam -Load capacity: 2000 kg -Number: 2x drives available -Price: complete -Dimensions: 2550/320/H350 mm -Own weight: 500 kg
Indoor crane, crane, trolley, crane running gear, crane undercarriage, girder undercarriage, headcarriage for bridge cranes, ceiling crane headcarriage, headcarriage single girder bridge crane -Manufacturer: Demag, 1 set of end carriages for single girder bridge crane -Load capacity: 3000 kg -Drive motor: Mannesmann Demag 16I6 KF 8-2 0.15/0.60 Kw -Support rollers: Ø 160 mm / support width 148 mm, dimensions see photos -Dimensions: 2300/650/H570 mm / 300 kg each -Transport dimensions: 2300/1230/H570 mm -Weight: 600 kg/total
Overhead crane, crane, trolley, crane running gear, crane travel gear, girder travel gear, head girder for bridge cranes, ceiling crane head girder, head girder for single-girder bridge crane, head girder for double-girder bridge crane, double-girder traveling crane -Manufacturer: ABUS, 1 set of end plates for double girder overhead traveling crane -Type: ZLK -Drive motor: ABUS 0.12/0.55 kW -Carrier rollers: Ø 200 mm / groove width 60 mm -Dimensions: see photo technical drawing -Transport dimensions: 2970/855/H720 mm -Weight: 640 kg
Double girder traveling crane, bridge crane, overhead crane, assembly crane, workstation crane, ceiling-mounted traveling crane, traveling crane, crane system -with 2x electric cable winches -Load capacity: 2 x 1600 kg -Bridge load capacity: 3.2 tons -Wingspan: 6.4 m -Hallway service -Dimensions: 2000/6400/H1000 mm -Weight: approx. 2000 kg
Overhead crane, crane, trolley, crane running gear, crane trolley, girder trolley, head girder for bridge cranes, ceiling crane head girder, head girder single girder bridge crane -Manufacturer: Demag, 1 set of end girders for single girder bridge crane -Type: ELV -Load capacity: kg -Carrying rollers: Ø 160 mm -Hole spacing: 290 mm Ø 20 mm / Dimensions see photos -Transport dimensions: 2355/365/H245 mm -Weight: 302 kg
ABUS ELKE - ELV 5t / 11m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : IR-H 10 radio control Wingspan : 11000 mm Chassis (sides): 2330 mm, are mounted Load capacity : 5000 kg Tare weights : approx. 2710 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.
ABUS ELKE - ELV 5t / 15m Single Girder Overhead Crane / Overhead Crane / Indoor Crane Type: ELKE - ELV Cat type: EK GM 2050 FE-201.41. 091 Crane classification : DIN 15018 H2 B3 Radio control : DEMAG IR-H 10 radio control Wingspan : 15000 mm Chassis (sides): 3220 mm, are removed Load capacity : 5000 kg Tare weights : approx. 3950 kg Complete plant, immaculate condition, works perfectly, more carefully dismantled and stored. All documents such as crane test book, operating instructions, technical drawing, spare parts catalogue etc. are available. Shipping available at an additional cost. Price includes loading on request. For more pictures, questions or information, we are at your disposal, also via Whatsapp at: 00491743357243 Other cranes with different spans and lifting capacities are available.
Suspension crane runway Crane system DEMAG type KBK 1Year of construction approx. 2000Monorail overhead track with monorail crane bridgeLight crane system system made of KBK modular system profilesLifting capacity: 125 kgSpan: 5 metresDistance longitudinal rails: 4.1 metresLongitudinal beam length complete: 12 metresGirder profile cross beam = KBK1Girder profile longitudinal rails = KBK1Consisting of:29 metres System profile KBK-1 (4x 6000 mm + 1x 5000 mm)1 piece carriage for the crane suspension2 pieces Double carriage for the longitudinal rails10 pieces Screw claws for the
Wall slewing crane DEMAG type KBK 2Demag No. boom: KBK- 982 040 44Demag No. wall bracket : 85104044Year of construction 2000Lifting capacity: 500 kgRadius: 4000 mmSwivel range 270Wall mounting plate: 1170 x 440 mmHeight UK- Boom to OK- Wall bracket: 1000 mmFlange plate Wall bracket to middle Bolt: 270 mmTotal length Flange plate Wall bracket to boom tip: 4330 mm: - Boom profile C-profile rail DEMAG KBK 2- Carriage for C-profile rail DEMAG KBK 2- Original paint yellowWeight 170 kgVery good conditionPrice without
- Valve bridge MWM 12129392 - Suitable for several motors - Please note! Price per piece! - References -> 12136467 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and int ...
The scope of delivery includes: 01x Depth bar frame, used Material colour: sendzimir galvanized Total length: approx. 1,250 mm for shelf depth: 1,200 mm Clear span: approx. 1,100 mm Truss support: approx. 50 mm Support angle: L: approx. 80 x 80 mm Total width: approx. 860 mm Inner width: approx. 855 mm Material thickness: approx. 3 mm Side frame: Length: approx. 1.2450 - 1.070 mm Front Tapered Width: approx. 200 mm Height: approx. 195 mm End stop: Width: approx. 200 mm Height approx. 195 mm Your contact persons in our company: Mr. Andre Evering Mr: Mario Klöver Mr: Falk German General information about the product: It is a used item, there may be scratches, dents and traces of use. This item is available for pickup only. A further desired transport or a dispatch of this article is associated with additional costs, which are separately depending o ...
Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...
Valve bridge inlet MAK M43 and M43C recon MAK Part Number: 433515-200
RECON valve bridge inlet and outlet MAK M43B and M43C MAK Part Number Inlet: 433515-100 MAK Part Number Outlet: 433515-200
The scope of delivery includes: 01x Depth bridge, used Manufacturer: Nedcon Material colour: sendzimir galvanized Truss support: approx. 40 mm f. Stand depth: approx. 800 mm Total length: approx. 802 mm Clear span: approx. 709 mm Profile dimensions: C:60 x 50 x 12 mm Material thickness: approx. 2.00 mm Weight/ piece: approx. 1,983 Kg General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
The scope of delivery includes: 01x Depth bridge, used Shelving system: SSI Schaefer Material colour: RAL 5010 blue Overall length: approx. 1,065 mm f. Stand depth: approx. 1,050 mm Clear span: approx. 946 mm Profile dimensions: U 50 x 50 x 3.00 mm Truss support: approx. 54 mm Unit weight: approx. 3.75 kg The depth web can be used for the following truss profiles: INP: 80 x 42 mm IPE: 80 x 46 mm INP: 100 x 50 mm Box profile widths: - 40 mm - 50 mm General information about the product: This item is available for pickup only. A further desired transport or dispatch of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.
Cable bridge, drive-over protection, hose bridge, cable duct -Cable bridge: overrun protection -Channel width: 20 mm -6 mounting recesses -Quantity: 1 piece available -Dimensions: 985/150/H30 mm -Weight: 4.2 kg
2 almost identical, mobile loading bridges from 1.45 m to 0 Manufacturer Fa Butt, Factory No, 80110001281 A Year of construction 2010 Load capacity 7,000 kg
DONATONI P425 bridge saw was built in 2023 in Italy by Donatoni Macchine Srl. The machine is designed for precision machining of slabs and small blocks made of e.g. ceramic, stoneware and natural stone with a maximum thickness of 115 mm. It enables a number of advanced operations to be performed, such as cross-cutting, bevel cutting, hole drilling and milling. All these machining processes are performed fully automatically, while maintaining the high quality and repeatability of the manufactured parts. The cutting head, equipped with a reliable electro-spindle, operates in 5 axes. The movement of all axes is performed by brushless digital drives, cooperating with precision gears. The DONATONI P425 is distinguished by its monobloc design made of electro-welded and hot-dip galvanised steel. The design includes, among others, a bridge, carriage and tilting work table. The workspace is pr ...
MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag ...
Machine number: 822441 Travel X-axis: 1,020 mm Travel Y-axis: 510 mm Travel Z-axis: 600 mm Control model: HEIDENHAIN TNC 410 PA Spindle speed (max.): 6,000 rpm Drive power: 13 kW Spindle holder: BT 40 Number of tool positions in tool changer: 22 Rapid traverse X and Y axis: 40 m/min Rapid traverse Z-axis: 30 m/min Work table Length: 1,150 mm,Width: 490 mm EQUIPMENT Note: The machine vices mounted on the work table as well as the tool holders installed in the tool magazine and in the spindle, including the tool, are not included in the sales and scope of delivery. The oil mist extraction, which may be seen in the photos, is not included in the sales and scope of delivery. Reference: Zabyx - Lot 52 Auction-ID: A7-46763-340
Swing boom crane boom crane with ZYBA-MAT Manufacturer: Strödter Type: ZP 60 / SAZ 60 D1 Built: 2014 New and unused Load capacity permissible load weight max: 25 kg Working radius approx.: 3,000 mm Stroke max: 800 mm Lifting speed max. : approx. 800mm/sec. Energy supply: pneumatic Mounting: Swing boom with stand column Net weight device (with load-carrying equipment): 287 kg Pneumatic working pressure: 6 bar Air quality required for maximum load-bearing capacity: clean, dry and filtered (5 microns) Air consumption max.: approx. 17 Nl/ double stroke ZYBA-MAT on the swivel boom Pneumatic balancing control with automatic scale
Bridge crane for Ausseneinsatz Fabrikat steel - built 2007 Traglast 60 t - 16 m track width - height 8 m with enhances crane runway - completely screwed approx. 66 m long
Gantry crane / gantry crane 5 t – TEICHMANN / DEMAG – Year of construction 2014 Used gantry crane / gantry crane in stable and functional condition. Ideal for workshop, production, warehouse or assembly areas. The crane was rebuilt or rebuilt in 2014 and is equipped with a monorail hanging trolley from DEMAG. Technical data: • Load capacity: approx. 5.0 t • Track center dimension: approx. 6.0 m • Lifting height from OK crane rails: approx. 6.0 m • Crane chassis length: approx. 3.0 m • Crane runway length: approx. 10 m • Feeder cable for approx. 12.5 m crane runway length • Usable crane travel: approx. 9.5 m • Year of renovation / reconstruction: 2014 Equipment: • DEMAG Monorail Hanging Trolley • Electric chain hoist • Operation via floor control / hanging switch • Emergency stop function • Chassis electrically movable • Robust steel c ...
Single-girder overhead crane Manufacturer: Demag Lifting capacity 8to Average track approx. 19.5m Lifting height min 6m With built-in crane scale / lifting weighing device. Hoist runs on the side of the beam so that the crane hook can be lifted to the lower edge of the beam. Crane system has already been dismantled. Optionally with approx. 2 x 50m crane rails.
Machine Type: Travelling Crane Manufacturer: Vetter Type: MOB3.15-3.00 Year of Make: 2016 Condition: good Offer will only be sent if a complete imprint is provided! Price 5.450 Euro incl. 19% VAT / fixed price Location Warstein , Germany Reference number M-VET-0526 DESCRIPTION We offer you a used travelling crane from the manufacturer Vetter. Max. lifting capacity: 315kg Boom length 3m Hook height approx. 2.6 - 2.8m / exact dimensions to follow Weight approx. 3.5t Availability: mid-June Our offer is aimed at tradespeople who are registered in the sense of the Trade Regulation Act according to §14 GewO. The offer is subject to change, subject to prior sale. Please provide your full contact details to receive a quote with our terms and conditions of payment. Errors in the descriptions and offers are reserved
Forklift crane arm STABAU type KR 15Fabr. No. 003-14276 Year of construction 1986Nominal load capacity 1500 kgLoad capacity at 450 mm Radius 1500 kgLoad capacity at 750 mm Radius 1100 kgLoad capacity at 1200 mm Radius 750 kgSuitable for fork carriage FEM 2 = 403 mmLoad hook adjustable in 6 stepsTotal height of the crane arm 1350 mmBoom profile 110 x 110 mmon mobile transport rackGood condition; used
E-chain hoist, electric hoist, crane STAHL type R 12Fabr. No. 3437532 Year of construction 1979Load capacity: 1250 kgHook travel: 2.4 metresLifting speed for one load train: 8 m/min. Fine lifting speed for a load train: 2 m/min. Lifting speed for two load trains: 4 m/min. Fine lifting speed for two load trains: 1 m/min.2 load trains = 1250 kgEngine power: 1.25 / 0.25 kWNetz connection 380 volts, 50 Hz- without chain bag- trolley carriage for KBK 2 - double girder crane bridge, overhead cranegood condition; used
Electric chain hoist crane DEMAG type PM 12LF ManuliftElectric crane with one-handed operationFabr. No. 5877813 year of construction 1990Load capacity 125 kgHook travel 3.5 metersLifting speed 12 m/min. Fine lifting speed 2 m/min. Motor power 0.32 / 0.05 kWNeching connection 400 Volts, 50 Hz1 Load train = 125 kgManulift Hand control directly on the crane hookGood condition; used
E-chain hoist, electric hoist, crane DEMAG type DKUN 10-500-K-V3 F6Fabr. No.: 61077868 Year of construction: 1999Load capacity 1000 kgHook travel 6.5 metersMain lifting speed 10 m/min. Fine lifting speed 1.6 m/min.2 load trains = 1000 kgPower supply 400 volts, 50 Hz.- Electric chassis DEMAG, type EU/RU 22 DK, 13/6 PF 12/4- Chassis for double T-beams, beam width 120 to 280 mm- 2 travel speeds 4.6 m/min and 14 m/min- Cable length of the control bottle 4.5 metersWeight 130 kggood condition; used
maximum number of results exceeded
please refine your search
10 € 
