bread machine used for sale

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1500 Technical data: Power supply: 380-400 V Engine power (hp): 3 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x 16 Grinding Angle (degrees): 0-50 Dimensions (mm): 2310 x 790 x 1810 Max. sanding length (mm): 1500 Weight (kg): 775 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage space LED lighting for a good view of the gr ...

Compounding extruder Material: PE, PP, PS, ABS + fillers / Details: dcising, segmented screws and cylinders, degassing, vacuum pump, screw speed max. 300 rpm, DC motor 252 kW, heating power 98 kW, incl. side-feeding Leistritz LSB 90 (screws 2x x 90 mm, drive: 3.0 kW, screw speed: max. 150 rpm), Macromate SPS visualization. (attached photos are BEISPIELBILDER)

2 plies, 4 colours Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

Stationary sharpening bench for cleavers OSAMA Knife Grinder 1000 Technical data: Power supply: 380-400 V Engine power (hp): 1.5 Speed (rpm): 2800 Grindstone dimensions (mm): 125 x 60 x16 Grinding Angle (degrees): 0-50 Dimensions (mm): 1810 x 700 x 1810 Max. Grinding Length (mm): 1000 Weight (kg): 500 Features: Wide angle adjustment from 0 to 50 degrees Max. blade length of 350 mm Easy operation and setup via touchscreen Auto-stop when setpoints are reached Placing and fixing the knives on the grinding table by means of electrically activated magnets Adjustable grinding depth per operation Adjustable total grinding depth – auto stop when the set grinding depth is reached Adjustable sharpening length – only the length of the blades is driven, which speeds up the overall sharpening process Spacious storage ...

Sleeve machine Berning Includes steam tunnel Includes heat-resistant modular belt Product diameter: 30–110 mm Sleeve length: 30–370 mm Full body: Max. 300 pieces per minute (depending on sleeve length) Suitable product materials: PP, PS, PET; HDPE Suitable sleeve materials: PET, PVC, OPS with hot melt Year of manufaturing: 2017 Function description: At an interface, the products are transferred from a conveyor belt and fed into the machine system. The incoming products run into the screw system, where they are separated. After separation, the sleeve is applied in the sleeving machine. The sleeve application is fully automatic. When the application is complete, the product is transported to the steam tunnel. In the steam tunnel, the product and sleeve material shrink until the sleeve has adapted to the contours of the product. After shrinking, the products a ...

For sale is a laser cutting machine TruLaser 3530. technical data: Additional details - Operating hours: Beam-On 2030 h/Laser-On 9814 h - X travel distance 3000 mm (max. 3104) - Y travel distance 1500 mm (max. 1580) - Xp travel 300 mm (max. 305 mm) - Z-travel distance 114 mm - maximum material thickness 20 mm - maintenance-free three-phase motors in X1, X2, Xp, Y1, Y2 and Z axes - maximum positioning speed axle parallel 120 m/min - Simultaneous 170 mm/min. - Acceleration when positioning X-axis 9 m/second - Xp + Y axis 15 m/second - Cutting X-axis 4 m/second - Cutting Xp and Y axis 15 m/sec. Standard - Closed machine frame with integrated laser resonator - Movement unit for optimal processing speeds - Additional highly dynamic Xp axis - Automatic pallet changer - Closed beam guide - NitroLine, high-pressure cutting - FocusLine, constant focus position - Comp ...

PET Preform injection moulding machine Clamping force 320t Spray weight 6935gr. Snail 130mm Preform extraction system SERVO IV, TPS robot TRT-M4-72-E, 72-speed, 4-stage, incl. withdrawal kit, conveyor belt LT/h 1825, dosing Motan Minicolor PET

<b>Features:</b> Used roller conveyor Very stable design Feet to order separately Drive type: Gravity without motor Condition: fully functional with traces of usage Ideal for fast material transport Professionally dismantled and packaged <b>Technical data:<b> </b> Dimensions of the roller conveyor</b> Total length: 54,000mm Total width approx.: 740 mm Roll width: 650mm <b>Details of the role</b> Roll diameter 50 mm Axis distance: approx. 75 mm Material: steel, galvanized <b>Information on the framework</b> Frame: Aluminum Rolls: galvanized Frame: As good as new Frame height: 120mm Frame Width: 40mm <b>Roller conveyor</b> The roller conveyor is ideal in the picking zone for interlocking machines or workstations and optimising the internal process. During transport, the ...

Universal tool milling machine, used universal milling machine, used Type FU 315 - V/2 Fabr. WMW Heckert Built: 1979 Table size/ table: 1250 x 315 mm Laengsmotion/ longit. move: X: 850 mm Horizontal movement/ horiz. Move: Y: 270 mm Vertical movement/ Vert. move : Z 355 mm Tool holder/taper: ISO 50 Spindle speeds R+L infinitely/ speeds of spindle ( left/right) 28 - 1400 rpm. Pre-shot stepless all axes X, Y and Z/ feeds all axis 10 - 630 mm/min / 250 mm/min Drive power/ load 3.8 kW Weight: 2 t

Saw milling Weibert FR3 new â?¢ Format sliding table 2000mm â?¢ Cutting height: 103mm â?¢ Boom table cpl. â?¢ Saw blade: swivel, max.315mm â?¢ 3KW motors (4KW) 400V 50HZ â?¢ Mill: rigid 90° â?¢ Milling rpm: speeds: 1500/3500/6000/8000 rpm. â?¢ Safety railmilling stop 500mm â?¢ Right- and left-hand-running milling â?¢ WJ-400100W7 Accessories: Driving equipment

Capacity, ton 800 Movable die stroke, mm 180 Max. upsetting ram stroke, mm 380 Upsetting ram workstore, mm 250 Upsetting ram return stroke with closed dies, mm 130 Distance bentween upsetting ram and dies stroke forward, mm 140 Number of ram strokes per minute 35 Die dimensions, mm 590 x 220 x 660 Electric motor power, kW 40 Dimensions: mm 6300 x 3900 x 2850 Weight: kg app. 80800

Laser cutting machine Trumatic L3030 Manufacturer: trump BJ: 2005 Max workpiece length ... 3000mm Max. workpiece thickness ... 1500mm Max sheet thickness ... 12mm Laser power ... 2000w Total power demand ... 71kVA Machine weight ... 11500kg L x W x H ... 9800x5300x2000mm The machine is in good condition, possible to test under power.

Thank you for your interest in our new machines, which we can offer you as follows: Model: Roller embossing machine for hard candies with motor and starter Roller dimensions: approx. 58mm x 177mm Dimensions: approx. 500mm x 500mm x 350mm (lxbxh) Weight: about 100 kg. Details: with a set of brass preemine balls round shape (ball) without structure (pattern). You can choose one from our approximately 300 shapes and determine the size or you give us your own shape and size. The machines are handmade, smaller tolerances / deviations in the design or design, painting etc. are unavoidable and are irrevocably recognized when placing the order. Material certificates are not provided from hess warehouse. Lichtenau

Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.

Material: PVC // Details: DC motor 27 kW, degassing, counter-runner, capacity approx. 150 - 200 KG/hr.

Material: PVC // Screw diameter 52-104 mm (conical), counter-rotor, motor: 15 kW, capacity: 20 - 140 KG/hr.

NJP-1200C automatic capsule filling machine was built in 2022 in China by Guangdong Rich Packing Machinery Co., Ltd. Machine in very good condition, kept in a temperature and humidity controlled room. All moving parts were systematically lubricated according to the manufacturer’s recommendations. The NJP-1200C capsule filling machine is used in the pharmaceutical industry for mass production of medical products, i.e. drugs, supplements, etc. It enables fully automatic filling of hard capsules of size 00 and 0 with products in the form of powder or small granules. In one working cycle, empty capsules are fed, sorted, filled and sealed. The reliable design made of high-quality stainless steel meets stringent sanitary requirements, as well as maintaining high stability throughout its entire service life. All this makes the offered capsule filler an excellent choice for increasing the e ...

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

EvoPac VOLTA WINDOWS window and door wrapping machine was built in 2020 in Italy by EvoPac S.r.l. The machine is used for wrapping windows and doors of various dimensions with stretch film. Such protection minimises the risk of damage to the load during transport, as well as protects it from weather conditions. High performance, combined with state-of-the-art technical solutions, makes it a great solution for companies specialising in the manufacture and transport of windows and doors. The process begins with the loading of the product onto a turntable with an integrated roller conveyor. The pneumatic grippers, controlled by a foot switch, automatically adjust to the size of the product, thus ensuring high process stability. The stretch film is unwound simultaneously with the rotation of the work table and the load placed on it. At the end of the cycle, the EvoPac VOLTA WINDOWS automa ...

Perfectbinding line Acoro A7, 16 Station gathering machine type 1571, machine number NN31846/FE1193085, Tensioning element with hand feeding unit, Asir 3, 2 Vacuum pumps, Inhouse blowair, Spiral raceway type 3635 machine number MMFE1237011/75, MM3643, criscross delivery, intermididate element, MM 3642 Book block feeder,Endsheet-tipping element MMFE 1237011/ MNEZ1217462, MM 3648, Acoro A7 28 clamps perfectbinder, Main milling station, Roughening and notching station, Hotmelt spine glue unit, hotmelt side glue unit, Additional PUR spine glue unit, Hotmelt Premelter C80 for spine glue, Hotmelt premelter for side glue, Premelter for PUR spine glue, Pile cover feeder, Ansi water scorring, Scorring system, Double nipping station, Laydown system, MM drying conveyor system approx 50 meter, Reject gate, Muller martini 3671 Three knife trimmer Merit S year 2007 Machine number 1237011 MMEZ 1247462  ...

Material: PVC // Details: DC motor 10 kW, screw diameter 52 mm, L/D 16, degassing, capacity: approx. 10 - 70 KG/hr.

Clocked working machine for fully automatic sealing of round, flat and mould objects made of glass, plastic or metal with up to two different types of closure. Rubber plugs, drip inserts, screw and pilferproof and flange caps can be easily machined. Power: up to 4200 units/h.

Condition: Very good condition

Code: 0320 Brand: SAC SUERI - ITALY Model: T 4 - CE Standard Electronic tenoning machine for wooden frames, doors, cabinet doors, furniture, and various - CE Standard Technical data: End trimming saw with continuous axis positioning - Horizontal stroke 130 mm - Motor power 3,2 Kw - Blade diameter 400 mm Hole 30 Tenoning spindle - Spindle length 320 mm - Spindle diameter 50 mm - Motor power 5,5 Kw - Continuous axis positioning - Max tool diameter 350 mm Tenoning carriage table size 750 x 900 mm - Motor power 1,1 Kw - Working speed 3/10 mt/min - Positioning speed 30 mt/min - Tilting guide - Guide with stop and display Min workpiece height 30 mm Max workpiece height 90 mm Min workpiece width 30 mm Max workpiece width 600 mm Min/max workpiece length 200/3000 mm Max tenoning depth 130 mm Max squaring width 1000 mm Electronic control of all machine functions - Alphanumeric  ...

AUTOMATIC SPINNING LATHE DENN RPE-290 Denn Mod.RPE-290 Automatic Spinning Lathe- Spindle Speeds 615/1060/1825 RPM. More information on request.

General / technical data: used mechanical vertical internal clearing machine in very good condition. Pulling force at 3m/min: 4000 KG Clearance speed: 3m/min Return speed:6m/min maximum stroke: 1000mm maximum tool length: 1200mm Table area: 450mm x 250mm Table break: 90mm Workpiece diameter: any Dimensions ( h x w x t): 1610 x 630 x 855mm Engine power: 2.2 / 3.5KW Power supply:400 volts 50 HZ Accessories / Optional equipment: - integrated coolant/cutting agent system -electrical scanning of the clamping jaws (tool removal control to prevent unintentional retraction of the drawbridge) - Central lubrication system - CE machine marking Comment: The double spindle drive ensures a quiet and central pulling point as well as a constant clearance speed. The machine is mainly designed for the production of spring springs up to 20mm. The machine has a very quiet machine  ...

2-station machine, Preform silo, - guide and - set-up. For an extra price: compressor + moulds. Power up to 2900 bottles/hour

Blow volume 0.2 - 10.0 ltr. Capacity: up to 1200 bottles/hour NEW MACHINE, 1-station machine, incl. preform bunker and feeder. Gergen Supplement: Compressor, refrigeration unit and moulds

Plegadora

PET stretch blower, incl. Preform silo, conveyor, sorter and feed, up to 6000 bottles/hour, 6 stations, 0.2 - 3.0 litre, technically / optically good condition. Available at an additional cost: compressor system, mould cooler and moulds.

Material: PE, PP, PS, ABS, // Details: DC motor: 93 kW, degassing, screw diameter 115 mm, L/D 26

PET stretching / blowing machine, up to 3000 bottles / hour, incl. preform bunkers, conveyors and feeders. Available for an additional charge: moulds for 0.3-2 l., compressor and cooling unit

PET plug-in / blow era 10 blowing stations, capacity: approx. 8,000 - up to 10,000 bottles / hrs. Volume: 0.2 - 3.0 litre, incl. preform silo and steep conveyor and feeder.