bread machine used for sale

We can offer the following paper bag machine for Block bottom / SOS bags: Block bottom / SOS bag machines Producer : Windmoeller & Hoelscher Type : Triumph 3 Year app. 1968 Bag width 120 - 260 mm. Tube length 240 - 900 mm. Bottom width 70 - 150 mm. Max. web width 860 mm. Max. mechanical speed 200 m/min. W&H QMS 992 - 4 colour tail end printer 2 unwinds and glue units for 2 ply bags Still in operation: No Available: Now

Format: 700 x 1020 mm R26060/18 SAKURAI screen printing machine Model: SCA 102 Built: 1989 max. print size: 700 x 1020 mm Availability: instantly automatic screen printing line high speed cylinder Special version: min: 500 x 350 mm Sheet transfer station can be folded on one side optical front edge control mechanical double-arch control via friction rollers pneumatic squeegee pressure control and sieve clamping PERFECTION high-performance dryer 1120/4: Inlet width 1100mm, 2 warm and 2 cooling zones with UV dryer MIRUS forklift model SV Etc. Available: immediately

R26115/18 VITS Impregnation and painting system Model: IPA / S / II Built: 1996 Working width: 2200 mm for finish foil and edges Working width: min. 625 mm Heating: Thermal Oil 250 Dryer control: 80 - 220 Speed: 5 - 120 m/min Impregnation plant Painting works Takeup with thermal oil boiler for impregnating, painting of decorative and similar papers from 30 - 240 g/m2 Available: immediately

We can offer: Windmoeller & Hoelscher Type : Triumph 2 Year: 1974 Bag width 70 - 190 mm. Tube length 180 - 470 mm. Bottom width 40 - 110 mm. Max. mechanical speed 250 m/min. 2 unwinds and glue units for 2 ply bags With : Photocell for pre-printed reels With: Bottom patch unit Still in operation: Yes Available: Now

8-color format: 70 x 100 cm<br><br><br><><<br>Verf Gbar: Instant

Tensile testing machine for plastics, textiles, etc., type Z 653, built 1974, measuring range: 0 - 50 kp / 0 - 500 N. Pulling speed: 25 - 500 mm /min.

4 + 4 bags Sniffer Output Available: Immediately

Illig deep drawing machine Type: UA 150, 14.500 h Runhour! Built: 1986 Closing unit Plate size: 1000 x 1500 Other max. plate size: 1000 x 1500 max. moulding area: 950 x 1450 max. Drawing depth: 600 UA 150 has upper heating small spotlight with 4 position circuit with separate control cabinet underheating has total field control, flat-fitting chip frame autom. Upper stamping system Normal construction with 2 downhill control film throughhang control Protective grille by hand 4 compartment cooling fan + 4 compartment spray nozzle cooling pre-blowers + automatic deforming, reduction frame - quick change device electron. Schleicher control in the separate control cabinet 1 clamping frame for max. mold ingescent

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

folder Creaser adhesive machine Double fold head, 1 for perforation use as an option 3 Foldable Pockets + Gate Folds Adhesive system Format 50x100cm up to 480 grams Machine very suitable for covers with flaps, heavy bearing gate folding brothel etc. optional bag foldable possible MHGraphics is a Fidia dealer. We organize installation and instruction of trained mechanic Verf Gbar: immediately / Instant

CAP.: 10 000 BTLS/H OF 1.5 L,

Main product investors Product accelerator Suction opening station 2 Product supplement investors End element with discharge Dashboard Band display 1 compressed air/vacuum pump Still in operation: No Available: immediately

in 2005 refurbished Still in operation: Yes Available: immediately

Type: MST, Y.O.M. 1989, strapping machine with 6 new replacement belt rollers, 0.9 kW.

BOTTLES & JARS!

We offer the following Flat- and satchel paper bag machine for sale: Producer : Windmoeller & Hoelscher Type : Matador NP 38 Year : 1994 Bag width : 60 – 380 mm. Cut-off length : 200 – 600 mm. Roll width : 1060 mm. Roll dia. : 1200 mm. With : W&H Alina 650 - 4 colour in-line printer With: Window unit Still in operation: Yes Available: Now

Type: MST. Strapping machine with 6 new replacement strap coils, 0,9 kW.

We can offer the following Block bottom / SOS bag machine for sale: Producer : Windmoeller & Hoelscher Type : Triumph 2 Bag width 70 - 190 mm. Tube length 180 - 470 mm. Bottom width 40 - 110 mm. With : Photocell for pre-printed reels Year approx. 1973 Overhauled by Garant Excellent condition Still in operation: Yes Available: Now

8-30 mm Still in operation: Yes Available: immediately

in 2013 refurbished Still in operation: Yes Available: immediately

Main product investors 12 Product supplement Investors Scan Still in operation: No Available: immediately

Machinery and equipment for the production of cement, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buyer's own e ...

FORMAT 76x100 cm for the production of folders (CD)Hullen, etc. Estro unit for capacitive folders (3D) Hot glue with 2 dues very good condition Option with Fidia Vetta folder locking unit (MHGraphics is Fidia-dealer) This price includes transport, installation and instruction (3 days) in Germany/Austria/Switzerland/France/Belgium/Niederlaende/Scandinavisin/ Poland. New price Euro 185.000 Available: immediately/Imm.

Machinery and equipment for the production of concrete blocks, All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own expense and at the buye ...

Ladies and gentlemen, we offer: Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and loading as well as transport is carried out at the buyer's own ex ...

Folding carton adhesive machine for CD cases equipped with friction feeder, transport route, press station, suitable for the following products: CD / DVD covers, envelopes, flat slippers, flight ticket bags, presentation folders.

4-color format: 1300 mm<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

Ladies and gentlemen, we offer: Machinery and equipment for the production of roof tiles, Machinery and equipment for stone production All prices are from Station World and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been legally signed. Mistake reserved. All technical details; Measurements, etc., are approximate information and are non-binding for the provider. The technical data are manufacturer or operator information and therefore non-binding for us. Used material is sold to the exclusion of any warranty. We do not accept any liability for used material. Warranty exchange and return are excluded. Customer protection is agreed between the parties. The entire process of dismantling and load ...

Drum sieve used for SM518 new in stock! Used Drum Screen for SM518 new in stock! Punching: 10 mm rectangle; Material thickness: 6 mm perforation: 10 mm rectangle; Thickness: 6 mm Condition: used/ as good as new (screen drum was only used for one test) Condition: used / like new (drum was only for a short test in use) Available: immediately Available: immediately Location: 77966 Kappel-Grafenhausen (near Freiburg) location: 77966 Kappel-Grafenhausen/ Germany (Near Freiburg) We are happy to organize the transport for you! We can arrange transport for you! We also supply new or other used screen drums to all common screening machines (SM620, SM618, T4, T5, Mustang,). Manufactured in our factory in Germany from German, very high-quality, sharp-edged perforated sheet metal. We also provide new or used screening drums for all standard machines (SM620, SM618, T4, T5, ...

Main product investors Suction opening station 1 Tandem product insert stations 2 Product supplement investors 1 Tandem product insert stations Accessories: Still in operation: No Available: immediately

W&H Matador 40 Bag width : 70 – 400 mm. Cut-off length : 180 – 780 mm. Roll width : max. 1250 mm. With a 2 colour in-line printing machine.

Ladies and gentlemen, we may offer you, on the basis of our "General Terms and Conditions of Delivery and Payment for the Trade in Used Machinery and Equipment", we offer you: 1 piece used vacuum oven, Make: BMI Type: B 64 R THY Dimensions: 600 x 900 H x 600 mm Max. temperature: 750C Power: 60 kW max. batch weight: 600 kg Working vacuum: 5x10-2 to 5x10-3 mbar Cooling pressure: 1.2 bar abs. the parts remain bare Price and pictures on request All prices are from Station Europa and the dismantling and all follow-up costs are to be made by the buyer. VAT is not included in the prices. The contractual agreements for the individual offers must be agreed separately and only apply after the contract has been signed. Mistake reserved. All technical details, dimensions, etc. are approximate and are non-binding for the supplier. The technical data ...

Technical details material.: OPS, APET, PP, HIPS, ABS Forming area (VxH): 520 x 400 mms Depth of draw: 120 mms of material thickness (max.): 1.50 mms of technical details heating, moulding and cutting. This machine has the BFS system which allows to cut in place in the forming station Forming area: 520 x 400 mms of Max sheet width: 590 mms No of cycles are very much depending on the product. However we have been producing more different products with up 50 cycles by minute, but they were no deeper than 40 mms. All movements are 140 mms with a recommended max. depth/hight of 120 mms We have been producing OPS, APET, PP, HIPS and ABS on the machine. The read few years mainly HIPS and APET The thicknest material we have been producing, were 2.0 mms HIPS, but I wants recommend more than 1.5 mms HIPS.

We offer a W&H bag machine for the production of conical bags. Still in operation: No Available: now

Floor Type Milling and Boring Machine SKODA Model: WD 250 Offer ID: 452 Manufacturer: SKODA Model: WD 250 New in: 1969 Condition: very good, under power,being serviced Localisation: Poland - We are owner this machine ! Technical details Rotary table: 2 000 x 2 000 mm Floor plates (8 psc): 3 000 x 1 500 mm Spindle diameter: 250 mm Bed haight: 600 mm Bet width: 2 400 mm X Travel: 5 000 mm Y Travel: 4 000 mm Main spindle intersection: 250 mm Main spindle ball metrical: 140 mm Maximum moment on the main spindle axis: 300 000 kgcm Intersection of the rapid spindle: 125 mm Ball in the rapid spindle: 430 mm Maximum depth of boring with main spindle: 2 250 mm Maximum depth of boring with the rapid spindle: 630 mm Feed of the spindle's crosshead: 500 mm The deepest position of the main spindle axis over the bearing: 1 100 mm Dimensions: 12 500x6 000x9  ...

EDM Drahterodiermaschine AGIE AGIECUT 250 with 15 PF THERE, generator and control. construction year: In 1992 state: Gebrauchtmaschine (in the very good state) technical data: Verfahrwege (X x Y x Z): 400 x 250 x 250 mms Max Werkstueckgroesse Werkstueckgroesse werkstueckgroesse X: 860 mms Max Werkstueckgroesse Werkstueckgroesse Werkstueckgroesse Y: 580 mms Max Werkstueckgroesse Werkstueckgroesse Werkstueckgroesse Z: 250 mms work piece weight: 400/800 kg. with automatic Drahteinfaedelung . record and without bain-marie possibly. Drahterodiermaschine Agiecut 250 dimensions: length 1920 mms x width 2,020 mms x height 2440 mms weight: approx. 3,000 kg DA15 PF dimensions: length 2000 mms x width 1,110 mms x height 2220 mmm weight: approx. 560 kg generator and control dimensions: length: 1620 mms x width 950 mms x height 2,415 mms weight: approx. 7 ...

ROVEMA, BOSCH, HASSIA-REDATRON, usw. vertikale Schlauchbeutelmaschinen in gutem Zustand, betriebsfertig oder (general)überholt, in Lager und Werkstatt

Manufacturer: Wright Engineers cable diameters from 25 mm to 160 mm can be processed. Cables with PVC, rubber and iron ammization Drive 380 V Weight: 1740 kg Condition: new Diameter of cables to strip from 25 mm - 160 mm can strip cables with pvc, rubber, and also with armouring out of iron drive: 380 V weight: 1740 kg NEW MACHINE Every time we have 8 different cable-strippers on stock. New and second-hand machinery

We offer all types of screw manufacturing machines M3 - M25 -A href=inchabc://abc.steinfels-kg.de/sale/screws/inch>all information about the machine please click here

Various machines mostly Wafios or Deiters available! Eg. Wafios UF30 / VDF80 / DF3

We can offer you all types of screw making machinery for M3 - M25

Fischer-W.Mueller wind machine type: FMB 4/12-100, 3 layer Coex Blow machine Complete Line control: Moog construction year TMC: In 1998 hose unity snail diameter mm: 50/90/50 mass and weights dimensions LxBxH m: 7.4 x 7.7 x 2.4 machine weights kg: 14,300/5.000/11.000 other Data Sheet: FISCHER FMB used 4/12/100 3 layer Coex Blow machine Complete Line Year: In 1998 Location: Mülheim / storage fire: Model FISHER W.Mueller: FMB 4/12/100 land: For Sale Availability: Immediate Technical details of container with the current configuration: 1 l Number of heads: 12 materials: PE Number of stations: 2 extrusions type: Continuous Number of extruders: 3 2 x 2.0-50mm Unex Unex 1x 6.0-90 mms Screw diameter: 120 mms of engine power: 22 kW 90 kW of L / D: 24 and 28 Technical details Cycle - 12.6 sec = output / day = 70,000 botles The head included. For more information Availability: I ...

We can offer you all types of Wafios nail machines from S25 - N90

Make Wafios / MRP / Vitari Various machines available! Diameter areas 2 - 45 mm

Makes: Hilgeland / EW Menn / Ingramatic Diameter ranges 1mm - 20mm

Several types available please contact us by email.

Various machines for steel construction and mechanical engineering.

Gr. Pulling force 10 to, gr. Stroke 1000 mm , cutting speed 7.5 m/min, return speed: 24 m/min, weight: 6.2 to, built: 1987

Vacuum table machine WEBOMATIC Single-chamber machine -NEW- 230 Volt Chamber size: 370x400x130 mm Sealing strip: 1 x 350 mm with pexiglass lid

NEW MACHINE With format sliding table 2.60m Saw blade 250-315mm swivel: 90-45 Planing width of 410mm 4 knife shaft reversible knife (no more adjustment) Dressing table length of 1800mm Pass-through height from 4-225mm Mill: 90-45 swiveltove to the rear Milling rpm: 3000/4000/5000/ 6000/8000 and 10000 rpm Altitude stroke 160mm Engine power: 3 motors 3 KW400 V (4.0 hp)S1 100% continuous operation SPECIAL PRICE: net Options: Scoring unit with motor Miter stop 900mm Integral safety rails 500mm Westcott Drill Chuck 0-16mm Long hole drilling device Eccentric tensioner Right and left running (milling) Engine 4.0 KW (5.5 hp)S1 100% Planing knife 410 HSS G&WJ-BA-410-HSS