bran used for sale

Grinding diameter maximum: 0 mm Grinding diameter minimum: 0 mm Turning diameter: 0 mm Grinding depth: 0 mm CNC Brand: 0 CNC Model: 0 Control: FANUC Series Oi-TD Operating hours: 6000 Technical data Number of spindles: 4 Min. grinding diameter: 3 mm Max. grinding diameter: 200 mm Workpiece length max.: 600 mm Swing diameter: Above the workpiece table: 230 mm In front of the workpiece table: 350 mm Centre height: 130 mm Centre height over slide: 200 mm Axial motion: Longitudinal travel (Z-axis): 500 mm Cross travel (x-axis): 120 mm Spindle head (u axis): 150 mm Feed range: Z axis (longitudinal travel): 0 - 99.99 mm/min X axis (transversal): 0 - 99.99 mm/min Rapid traverse Z: 15 m/min Rapid traverse X: 5 m/min B axis swivelling range: -32 / + 2 ° Resolution: 0.0001 ° Grinding spindle head: Resolution: 0.001 Air connect: 5 bar Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 4.3 ...

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 200 mm Distance between centres: 280 mm Max. grinding diameter: 200 mm Grinding-wheel diameter: 125 mm Taper in spindle:: 5 MT grinding spindle: Longitudinal way of table: 150 mm Transversal way of the table: 140 mm Slewing range of grinding head: horizontal: 90 ° vertical: 90 ° Grinding spindle speeds: number (steps): 3 from: 4500 rpm up to: 7100 rpm Voltage 50 Hz 3x: 380 Volt Grinding spindle motor: 3 HP Machine´s weight about: 560 kg Overall dimensions machine: Length: 620 mm Width: 500 mm Height: 1500 mm Various accessories: Set of collets Set of grinding wheel arbors Dividing plates Set of grinding wheels Grinding wheel guard

Reference number 20156 Brand Gearbox REINTJES Model Gearbox WAF 540 Ratio 3,955:1 Power 660 KW / 885 HP RPM 1650 General condition USED - EXCELLENT CONDITION Status AVAILABLE SPECIFIC INFORMATION SAE Housing SAE 30 Controls MECHANICAL SPECIFIC FEATURES Brackets YES Oil cooler YES DIMENSIONS 80X50X95 Weight (kg) 1000 KG

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole with dome lid and is fitted with the following fittings equipped: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 5.30 m - D = 1.60 m - weight approx. 2.4 to. - ex works, freely charged - The container is sandblasted from the outside, primed and completely repainted - iron grey / RAL hue. (On request, other RAL colours are also possible!) general: You will receive an invoice with  ...

SABROE SMC 16-100 Brand:SABROE Type:SMC 16-100 Stock number:M21-1268 / M23-1350 Cooling capacity:338 kW Displacement:905 m³/h Refrigerant:R717 (NH3/Ammonia) Voltage:400 Volts Motor power:100 kW Dimensions:3100 x 1100 x 1900 mm Weight:2,500 kg Number in stock:2 piece(s) Price:Quotation request Description: An old but good Sabroe 16 cylinder compressor with electric motor. Mentioned capacity at -10/+35°C. Visit also our website: used-refrigeration. Just to give you an impression about the brands we have in stock:Grasso, Sabroe, Bitzer, Howden, Copeland, Baltimore, Evapco, Goedhart, Helpman, Friga Bohn, Guentner, Carrier, Trane, Lennox, MTA etc.

20167 ZF BW 251 - 4.792:1 A 0.346 KW/RPM Brand Gearbox ZF Model Gearbox BW 251A Ratio 4.792:1 A Power 0.346 KW/RPM RPM 1800 RPM Serial Number 3815 General condition Taken out running condition With Flexible Coupling With SAE Housing With Controls Mechanical With Mounting Brackets SAE 0 Weight (kg) 880 Dimensions (cm) 100 x 105 x110

- brand new - according to DIN 6616/D, above ground, double-walled, incl. test certificate. The container has two saddle feet, a manhole DN 600 with dome lid and is equipped with the following fittings: 1 filling tube with TW-cap (filling cap) and immersion pipe, 1 bearing pipe with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand-new limit sensor with type-approval (AIII), 1 conductor and 1 spare sleeve for extraction purposes, 1 optical leak detector with type approval and leakage liquid. The container is primed on the outside - on untreated sheets. L = approx. 10,00 m - D = 2.00 m - weight approx. 5.9 to. - ex works, freely charged - We recommend: Above containers sandblasting from the outside, prime and completely repainting - traffic grey / RAL hue. (On request, other RAL colours are also possible!) general: The price fo ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Series 31i-Model AB Technical data Table length: 400 mm Table width: 400 mm Table load max.: 400 kg Maximum swing circle of up to: 600 mm Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 560 mm Vertical travel (z axis): 560 mm Pallets chanching device: number: 12 Length: 400 mm Width: 400 mm Maximum workpiece weight: 400 kg Transport weight: 100 kg Tool magazine number of tools: 120 Spindle nose: BT: 40 Distance from horizontal spindle to table: 90 - 650 mm Spindle speeds: stepless from: 12 rpm up to: 12000 rpm Work feed rate: 20 m/min Rapid traverse:: 60 m/min Air connect: 6 bar Voltage 50 Hz 3x: 380 Volt Spindle power: 22 kW Total power required: 65 kW Total power required: 380 kVA Machi ...

Replacement columns for die-casting machine OL1600, D250 x 5908mm, 250 x 14mm, Idra, new -50% Special price -50% from new price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 260 x 6m long = 2.550 kg x € 2,9 = € 7.395 If you have a VAT number, we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg

Center height: 0 mm Center distance: 0 mm Spindle bore: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 260 mm Distance between centres: 2000 mm Swing over cross-slide: 340 mm Swing over bed: 520 mm Swing in gap: 620 mm Length of the gap: 145 mm Workpiece weight on centres max.: 760 kg Spindle hole: 42 mm Taper in spindelstock metric: 50 Taper in spindle: Camlock: D6" Spindle speeds: number (steps): 13 from: 20 rpm up to: 1800 rpm Pitch of leadscrew: 6 mm Steep thread transmission: 6:1 Taper in tailstock:: 5 MT Spindle diameter: 80 mm Spindle stroke: 200 mm Feeds: length: from: 0.045 mm/r up to: 2.52 mm/r Frontal: from: 0.003 mm/r up to: 1.75 mm/r Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 HP Machine´s weight about: 2500 kg Overall dimensions machine: Length: 3740 mm Width: 1300 mm Height: 1600 mm Various accessories: Face plate diameter: 550 mm 3-jaw chuck diameter ...

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 27052 Technical data Number of axis total: 4 Number of spindles: 1 Table load max.: 500 kg Longitudinal travel (X-axis): 560 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 600 mm Dimension of the workpice: Height: 850 mm Diameter: 630 mm Table divisions (B): 360 ° Resolution: 0.001 ° Table speed: 40 rpm Holding torque of the table: 1580 / 2300 Nm Torque max.: 1550 Nm Pallets chanching device: Length: 400 mm Width: 400 mm Maximum workpiece weight: 500 kg Tool changer: Number of tools: 120 Tool diameter max.: 80 mm Diameter with free adjacent pockets: 160 mm Tool lenght: 400 mm Max. tool-weight: 12 kg Spindle nose: HSK: 63 DIN 69893 Form A Spindle diameter: 225 mm  ...

Replacement columns for aluminium die-casting machine OL2000, D285 x 6830mm, 285 x 10mm, Oleopress, new -50% Special price -50% of the original price! Attention: This is a brand new, machined and finished column, for which we ask only the current raw material price: D 300 x 7m long = 3958 kg x € 2,9 = € 11.478 In addition, we also have a spar nut and 2 adjusting nuts in separate advertisements. If you have a VAT number we will gladly issue an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging.

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Technical data Table length: 700 mm Table width: 370 mm Drill capacity in steel: 22 mm Drill capacity in cast-iron: 24 mm Depth of throat: 300 mm Drill depth (spindle stroke): 120 mm Spindle head adjustment: 300 mm Table travels: Longitudinal travel (X-axis): 330 mm Transversal travel (y-axis): 210 mm Vertical travel (z axis): 350 mm Spindle speeds: stepless from: 250 rpm up to: 2000 rpm Feeds: Voltage 50 Hz 3x: 380 Volt Spindle motor: 2 HP Machine´s weight about: 990 kg Overall dimensions machine: Length: 1200 mm Width: 1000 mm Height: 1900 mm Various accessories: Coolant system Lamp

Brand: Guntner/ Bitzer Model: KCZ 110-60 Year of production: 2009 Power: 110kW Refrigerant: R23 / R507 Compressors: 4 pcs Bitzer (piston) (2pcs - 6F-40.2Y-40P and 2pcs — 6F-50.2Y-40P) Сapacitor: Güntner S-GVH 090.2A/2×3-N(D) Еvaporator: 2 pcs Güntner S-GFN 080/1×2-24-12 Сontrol cabinet, automation

Brand: Climaveneta Power: 102 kW Year of manufacture: 2001 Refrigerant circuit: 2 pcs. Type of refrigerant: R404а Compressors: 2 pcs. Copeland Dimensions: 1.97 х 970 х 1.30 m. Weight: 800 kg. Country: Italy Condition: Good condition

Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Ampere: 0 A CNC Brand: 0 CNC Model: 0 Control: CHARMILLES Operating hours: 171812 Technical data Working table: Length: 950 mm Width: 620 mm Max. dimensions of work piece: Length: 1260 mm Width: 690 mm Height: 360 mm Table load max.: 800 kg Longitudinal traverse (X-axis): 630 mm Cross traverse (Y-axis): 400 mm Vertical travel (Z axis): 160 mm U/V axis travel: +/-48 mm Resolution: 0.05 µm Taper-cut +/-: 30 ° Diameter of electrode wire: from: 0.05 mm up to: 0.33 mm Dielectric aggregate: Contents: 240 l Voltage 50 Hz 3x: 400 Volt Total power required: 15 kVA Machine´s weight about: 4100 kg Overall dimensions machine: Length: 2660 mm Width: 2610 mm Height: 2370 mm Various accessories: CNC control Automatic wire treading

Description Universal band saw of the Brand Forte suitable for tooling, fixture construction, training as well as mould making Cutting diameter: 400mm Sheet: 4870mm Technical data Cutting diameter 400mm Sheet 4870mm Speed 20-30-40-60 m/min Coolant Yes Connection 50 Hz 3x 380V Spindle motor 2.2KW

80,000 litres of earth tank - brand new - single-walled - for storage of rainwater, service water, extinguishing water, etc. on request with extinguishing water suction connection DIN 14230 Dimensions: D = 2,90m - L = 12,80m The container is equipped with a high-quality POLYURETHANe coating on the outside and has a manhole DN 600 with dome lid, screws and seal. On request, the container can be fully equipped with a extinguishing water suction connection, the container then meets the requirements of DIN 14230 - underground extinguishing water tank: Extinguishing water suction connection / suction line made of stainless steel V2A - according to DIN 14230 - consisting of: - 1 pc. suction line DN125 made of stainless steel - V2A - 1 pc. extinguishing water suction connection, overfloor, according to DIN 14244 - Form B, incl. A-fixed coupling according to DIN 14319 and ...

Description Universal Vertical band saw of the brand Mössner suitable for tooling, fixture construction, training as well as mold making Extension: 280mm Cutting speed: 24 - 558 m/min Description : The machine comes from a tool factory and has been regularly serviced and has few operating hours. Technical data Year built / YOM 1973 Cutting speed / Cutting speed 24 - 558 m/min Extension / swing 280mm Feeds no Table / Table 500x400mm Machine Weight /Weight ca 350kg Wheel Diameter / Wheel Slide 300mm Dimensions / Dimension 850 x 500 x 1,450 mm

Description Universal tool milling machine of the Kunzmann brand suitable for tooling, fixture construction, training as well as mold making Control NC Heidenhain TNC 124 Table 650 x 350mm Technical data Control NC Heidenhain TNC 124 Table 650 x 350mm Longitudinal path (X,Y,Z axis) 400x350x400mm Tool holder: ISO 40 Vertical spindle speeds: 40-4000rpm Feeds 2-4000mm/min Connection 50 Hz 3x 380V Spindle motor 4KW

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE Fanuc Series 18i-MB5 Operating hours: 34031 Technical data Number of axis total: 3 Number of spindles: 1 Table length: 770 mm Table width: 290 mm Longitudinal travel (X-axis): 450 mm Transversal travel (y-axis): 270 mm Vertical travel (z axis): 310 mm Drill capacity: 12 mm Max. taping diameter M: 8 Tool changer: Number of tools: 24 Tool diameter max.: 47 mm Diameter with free adjacent pockets: 100 mm Tool lenght: 160 mm Max. tool-weight: 1.2 kg Time of tool changing: 0.8 / 2.3 sec Average chip-to-chip time: 2.2 sec Spindle nose: HSK-A: 40 DIN 69893 Spindle speeds: up to: 30000 rpm Rapid traverse:: 75 m/min Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Spindle motor: 7 kW Total power required: 14 kW Various acces ...

Description Universal flat grinding machine of the elb brand suitable for tooling, fixture construction, training and mould making Travel: 750 x 320mm Table size: 600 x 300mm Technical data Grinding length 750mm Grinding width 320mm Workpiece height 500mm Table size 600 x 300mm Connection 50Hz 380V Engine 4.5KW Machine weight approx. 2650kg Dimensions 2000 x 1650 x 2110 mm

Drilling capacity: 0 mm Throat: 0 mm Spindle taper: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 415 B Technical data Drill capacity in steel: 25 mm Threat cutting in steel M: 16 Milling capacity: 100 cm3/min Taper in spindle: SF32 Spindle speeds: from: 50 rpm up to: 10000 rpm Table length: 885 mm Table width: 320 mm Distance of the T-slots: 50 mm T-channel width: 12 mm Number of T-channels: 5 Table load max.: 250 kg Height of table above floor: 1040 mm Min. distance from table to spindle: 0 mm Max. distance from table to spindle: 620 mm Longitudinal travel: 500 mm Transversal travel: 250 mm Vertical travel: 145 mm Feeds: X axis: 1 - 11000 mm/min Y axis: 1 - 11000 mm/min Z axis: 1 - 6000 mm/min W axis: 1 - 3600 mm/min Rapid traverse X: 11 m/min Rapid traverse Y: 11 m/min Rapid traverse Z: 6 m/min Voltage 50 Hz 3x: 400 Volt Power: 7 kW Total power required: 16 kW Machine´ ...

Model MC-800VF WITH 4 TH AND 5 TH AXIS FIRST TIME IN USE FROM 1996 Brand MATSUURA Type Vertical Machining Centers Control CNC (Yasnac i80 CNC control) Table 1200mm x 400mm Power 15 hp RPM 12000 rpm ATC 30 Taper BT40 Axis 3+2 Weight APROX 7000 KG TRAVELS: X = 800mm, Y = 440mm, Z = 485mm mfg MATSUURA mpn MC-800VF Matsuura MC-800VF WITH 4 TH 5 TH AXIS MACHINE WAS WORKING IN ROLLS ROYCE FROM A NEW AND IS GREAT MANTAINED HAS NEW BATTERIES, BACKUP MADE.

Center distance: 0 mm Grinding head Z-axis: 0 mm Center height: 0 mm CNC Brand: 0 CNC Model: 0 Technical data Centre height: 95 mm Distance between centres: 250 mm Table length: 450 mm Table width: 175 mm Max. grinding diameter: 130 mm Longitudinal way of table: 260 mm Transversal way of the table: 50 mm Vertical adjustment of the table: 50 mm Dividing attachment Table swivels: 360 ° horizontal: 360 ° vertical: 220 ° number (steps): 2 from: 3750 rpm up to: 7500 rpm Voltage 50 Hz 3x: 380 Volt Total power required: 0.7 HP Machine´s weight about: 450 kg Overall dimensions machine: Length: 1000 mm Width: 600 mm Height: 1400 mm Various accessories: Set of collets Set of flanges Dividing attachment universal 3-jaw chuck diameter: 85 mm Lamp Vice: width: 85 mm

bogie furnace 1x1x2m Temperature max 1200C PLC Data monitoring good quality Kontinuierliche Öfen für die Wärmebehandlung von Nichteisenmetallbändern Anlage für Wärmebehandlung von Wagenfahrgestellgüsse Öfen für die Wärmebehandlung von Transformatorblech Warmrundlaufprüfanlagen Öfen für Feuerwiderstandsprüfungen Hubbalken- und Hubherdöfen Poreba Gurutzpe Tacchi Geminis Tos Amutio cazeneuve Skoda Morando Niles Colchester Heyligenstaedt Kramatorsk Mondiale Safop Cazeneuve Alzmetall mas stankoimport csepel carlton kolb soraluce bergonzi flott Erfurt Weingarten smeral schuler ebu mueller zts kosice wlochy minster Stanko stankoimport glaser huta zygmunt aft donaldson eumuko Elblag Engel Demag Arburg Krauss Maffei Battenfeld Manesty Mazak Voronezh Trumpf Amada Cincinnati Netstal Rose Forgrove Illig Foremost Nissei Sandretto Fette Mazak Mori seiki Haas Okuma Gild ...

HENRY SØBY CR200 Brand:HENRY SØBY Type:CR200 Stock number:M21-1276 Cooling capacity:390 kW Application:Freezing Displacement:1,997 m³/h Refrigerant:R717 (NH3/Ammonia) Voltage:400 Volts Motor power:132 kW Weight:2,500 kg Year:1984 Number in stock:1 piece(s) Price:Quotation Request Description: An ammonia Henry Søby booster screw compressor unit with Unisab 3 controller and an oil separator (1082 liters). Mentioned capacity at an evaporating temperature of -40°C and a condensing temperature of -10°C. Visit also our website: used-refrigeration

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 31i Technical data Table length: 750 mm Table width: 450 mm Table load max.: 300 kg Longitudinal travel (X-axis): 650 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 350 mm Dimension of the workpice: Length: 750 mm Width: 635 mm Height: 250 mm Tool magazine number of tools: 60 Tool diameter max.: 80 mm Tool lenght: 250 mm Max. tool-weight: 7 kg Time of tool changing: 4.8 sec Spindle nose: HSK: E50 Distance spindle nose to table: 150 - 500 mm Spindle speeds: stepless from: 300 rpm up to: 30000 rpm Feed range: 1 - 20000 mm/min Rapid traverse:: 20 m/min Air connect: 4 - 8 bar Voltage 50 Hz 3x: 400 Volt Spindle power: 17/13 kW Total power required: 50 kVA Machine´s weight about: 7700 kg Overall ...

I am currently demolishing 2 PASSAVANT chamber filter presses with 2 x 2 meters of cast plates in Hof near Bayreuth There are larger quantities of brand new and unused conveyor chain links and conveyor chains. If you are interested, please contact me. Please request technical data and other pictures. ATTENTION: The parts are only available up to KW 21, after that no more ! Harald Schuhmann 0173 6659 053

Pallet length: 0 mm Pallet width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Number of pallets: 0   Positions ATC: 0   CNC Brand: 0 CNC Model: 0 Control: GE FANUC Technical data Longitudinal travel (X-axis): 700 mm Transversal travel (y-axis): 500 mm Vertical travel (z axis): 700 mm Table divisions (B): 360´000x0.001 ° Table speeds: up to: 15 rpm Pallets: number: 9 Length: 500 mm Width: 400 mm Time of changing palets: 14 sec Transport weight: 500 kg Tool changer: Number of tools: 144 (2x72) Max. tool-weight: 12 kg Time of tool changing: 6 - 8 sec Spindle nose: ISO: 45 Horizontal spindle speeds: stepless from: 40 rpm up to: 10000 rpm Feeds: stepless longitudinal from: 1 mm/min up to: 10000 mm/min transversal from: 1 mm/min up to: 10000 mm/min vertical from: 1 mm/min up to: 10000 mm/min Rapid traverse:: 15 m/min Voltage 50 Hz 3x: 380 Volt Spindle motor: 15 kW Total  ...

Brand Engine CUMMINS Model KTA 38 M2 Power 1300 hp RPM 1800 rpm Serial Number 33167700 General condition Low hours excellent condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged and aftercooled Sea water pump Starter Panel Water Pump Weight (kg) 4300 Dimensions (cm) 215 x 146 x 208

Grinding diameter: 0 mm Grinding length: 0 mm Workpiece weight: 0 kg CNC Brand: 0 CNC Model: 0 Operating hours: 31677 Technical data Centre height: 175 mm Distance between centres: 650 mm Grinding wheel right and left hand Max. Longitudinal travel: 700 mm Grinding weehl left side: Diameter: 400 mm Width: 80 mm Bore: 127 mm grinding wheel width: 80 mm Grinding wheel right side: Diameter: 400 mm Width: 40 mm Bore: 127 mm Workpiece weight on centres max.: 130 kg Grinding wheel speeds: number (steps): 6 from: 1500 rpm up to: 2400 rpm Peripheral speed: 35 m/s Hydraulic cross travel: 300 mm Angular displacement: 180 ° Work piece spindle head: speeds: stepless from: 60 rpm up to: 600 rpm rotatable: 0-90 ° Spindle taper:: 5 MT Taper in tailstock:: 3 MT Table angular displacement: 12 ° Table speed: from: 0.05 m/min up to: 9.0 m/min Voltage 50 Hz 3x: 400 Volt External Grinding wheel motor ...

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Capacity: 0 t Number of strokes per/min: 0   Table length: 0 mm Table width: 0 mm CNC Brand: 0 CNC Model: 0 Operating hours: 34925 Technical data Pressure: 60 to Stroke: (stepless) from: 70 s/min up to: 800 s/min Execution: 4 supports Table surface: Length: 770 mm Width: 620 mm Thickness: 120 mm Table relieving: Length: 580 mm Width: 100 mm With pressing power: downside up Slide adjustment: 80 mm Stroke adjustment: from: 20 mm up to: 76 mm Slide clamping surface: Length: 700 mm Width: 456 mm Passage between the supports: longitudinal: 650 mm Lateral: 260 mm Air connect: 6 - 10 bar Voltage 50 Hz 3x: 400 Volt Total power required: 41 kVA Machine´s weight about: 7600 kg Overall dimensions machine: Length: 2600 mm Width: 2100 mm Height: 2200 mm Various accessories: Belt feeding: SOPREM Workpiece conveyor Sound insulation cabin Chip conveyor

Aburg 470C-2000-800 SKU: 49 Availability: In stock Built: 2006 Brand: Arburg specifications Spray weight: 510 g Closing force 2000 kN Screw diameter: 60 mm Spray pressure: 1380 bar Tie bar ratio: 470x470 mm Clamping plate size: 730 x 730 mm Tool installation height min.: 250 mm Control: Selogica Language: Polish Power: 44.9 kW Engine hours: 57310 h Weight: 6830 kg Air valve: Yes

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN TNC 430 Technical data Number of axis total: 5 Rotary table:diameter: 280 mm Table load max.: 200 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 450 mm Vertical travel (z axis): 450 mm Dimension of the workpice: Height: 215 mm Diameter: 280 mm B axis swivelling range: + / - 115 ° C axis Tool changer: Number of tools: 30 Average chip-to-chip time: 5.5 sec Spindle nose: HSK: 40 Spindle speeds: stepless from: 20 rpm up to: 36000 rpm Feed range: 1 - 30000 mm/min Rapid traverse:: 35 m/min Measurement system: Resolution: 0.1 µm Input resolution: 0.1 µm Display step: 0.1 µm Air connect: 6 bar Voltage 50 Hz 3x: 400 Volt Total power required: 22 kVA Noise level: 78 dB (A) Machine´s weight abo ...

A rinser of the brand ICS is offered for rinsing the bottles before bottling. Rinser has 40 grippers Power: 12,000 fl/h Pitch: 125 mm Built in 2002 Control : Siemens 7 If you have any further questions, please do not hesitate to contact us

Sw BA35 Mobile Mating Work Center Reconditioned :::TECHNICAL SPECIFICATIONS::: CNC Model: Siemens CNC version: 840D Tool attachment: iso 40 Spindle power: 22.5Kw Spindle Rpm: 10000 Number of tools: 36 X-Axis Stroke: 2650mm Y-Axis Stroke: 500mm Z-Axis Stroke: 500mm X Y Z Linear Axe Rapid Feeds: 40m/min Table size: 3600x500 ( 2x1800)mm Guides: roller CNC divider: yes Brand and partition model: Fibroplan Flange diameter: 340mm Rotation: continuous Chip evacuator: carpeted Machine equipment: 20 cones :::D IMENSION AND WEIGHT::: Length: 6300mm Width: 3200mm Height: 3200mm Weight: 12000Kg

Parcels of 7 machines 1x CNC 5 axis milling center, brand Okuma, type MU 400 VA, built in 2004, with various accessories and tool holders 1x CNC 5 axis milling center, brand DMG, type DMU 50/60, year of construction, 1996 with various accessories and tool holders 1x CNC 3 axis milling center, brand Okuma, type VR 40II, year of construction, 1995 with various accessories and tool holders 1x CNC 4 axis milling center, brand Okuma, type MC 40VA, built in 1991, with various accessories and tool holders 1x tool adjuster, Make EZSET Type 400 1 x Schumpfgerät, Brand Heimer, Type Power Clamp, Year of construction 2019

Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: FANUC Series 18i-MB Technical data Number of axis total: 3 Table length: 1200 mm Table width: 625 mm Table load max.: 1200 kg Longitudinal travel (X-axis): 1100 mm Transversal travel (y-axis): 625 mm Vertical travel (z axis): 500 mm Tool changer: Number of tools: 24 Tool diameter max.: 80 mm Tool lenght: 250 mm Max. tool-weight: 7 kg Spindle nose SK: 40 Distance spindle nose to table: 150 - 650 mm Spindle speeds: stepless up to: 15000 rpm Work feed rate: 12 m/min Rapid traverse: long.: 40 m/min Rapid traverse: transversal: 40 m/min Rapid traverse: vertical: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 11 / 18.5 kW Total power required: 45 kVA Machine´s weight about: 9710 kg Overall dimensions machine: Length:  ...

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 12463 Technical data Number of axis simultaneous: 3 Table length: 700 mm Table width: 630 mm Table load max.: 800 kg Longitudinal travel (X-axis): 600 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 500 mm Tool magazine number of tools: 30 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 100 rpm up to: 24000 rpm Rapid traverse:: 30 m/min Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 26 kW Time under power: 43869 Hour Operating time: 12463 Hour Working time: 26214 Hour Spindle run time: 8612 Hour Noise level: 75 dB (A) Machine´s weight about: 8300 kg Overall dim ...

New 250 KW 294 KVA water-cooled three-phase motors EMOD WKASYG 315L4-700 (5 pieces) for sale. 4.500 € for each generator plus VAT. FCA freely charged in D-Bergisch Gladbach. Brand: EMOD Type: WKASYG 315L4-700 Year of construction: 2018 Voltage: 400 V rpm: 1510/ min Engine number: 8359010 Weight: 2.322 kg Rated voltage: 400 D Rated current: 425 A Rated power 250 kW/ 294 KVA Operating mode: S1 Engine protection: KALTL. : 3155°C Design: B3 Wave: 80170 KLK location: 0° Protection class: IP55 Frequency (Hz): 50 Condition: Completely new

Table length: 0 mm Table width: 0 mm Longitudinal X: 0 mm Cross Y: 0 mm Vertical Z: 0 mm Positions ATC: 0   Positions APC: 0   CNC Brand: 0 CNC Model: 0 Control: HEIDENHAIN iTNC 530 Operating hours: 34729 Technical data Number of axis simultaneous: 4 Table length: 900 mm Table width: 600 mm Table load max.: 800 kg Longitudinal travel (X-axis): 800 mm Transversal travel (y-axis): 600 mm Vertical travel (z axis): 500 mm Tool magazine number of tools: 50 Tool diameter max.: 75 mm Tool lenght: 210 mm Max. tool-weight: 2.5 kg Spindle nose: HSK-A: 63 Spindle speeds: stepless from: 100 rpm up to: 24000 rpm Voltage 50 Hz 3x: 400 Volt Spindle motor: 12.5 / 22 kW Total power required: 26 kW Noise level: 75 dB (A) Machine´s weight about: 8300 kg Overall dimensions machine: Length: 4000 mm Width: 3700 mm Height: 2500 mm Various accessories: Paper filter facility Chip conveyor Dividing attac ...

High frequency - miter press Miter assembly machine Miter gluing machine Brand: Grum-Schwensen Model: HF 120 High frequency device Manufacturer: Himmel / Himmelwerk Model: HG 3300 Workpiece cross-section max.: 100 x 100 mm PVAC glue / white glue

Engine Brand: CUMMINS, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Beige , Working Hours: 1250 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 12 Volt , Rated Power: 77 Kw, Rated Speed: 2800 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/catalog/product/view/id/28474, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: 4B3.9 CPL; Transport weight [kg]: 600

3692 KW Dresser Tuthill Nadrowski Tandem Condensation Turbine (steam turbine)for sale. 58.000 € plus VAT FCA freely charged in D-Bergisch Gladbach. Scope of supply: Steam turbo set and generator (6 KV). On request, generators with 10 to 11 KV are also available. A suitable capacitor costs 75,000 € extra. Not included: Control. Brand: Leroy-Somer Manufacturer: Tuthill Nadrowski Turbinen GmbH Type: LSA 56 BS 5- 4P Serial No.: 168233-1 Year of construction: 12-2001 Electr. Power: 3692 KW Power: 4625 KVA Voltage: 6000 V rpm: 1500 rpm Size (L x W x H): 3.10 m x 1.80 m x 2.70 m Weight: 10,000 kg Total output HD and ND turbine: 3692 KW. Total weight steam turbo set: 15 tons + 10 tons generator.

Brand new wooden powder trays for mogul plants, quality, long-life cycle, material, precision analog to Treiber, stackable, appropriate for all mogul lines, tested for NID, W&D, MAKAT, BOSCH, partially already certified by the manufacturers of the line send your price inquiries to company SCHOKOMA GMBH indicating quantity of trays, bottom material, dimensions inside and outside, delivery possible

Automatic labeller Brand: Wilux, Type: PAS2202 / Label set II-A6310-RH-P Year of manufacture: 2012 Serial number: 25797 Maximum width of the roller: 80 mm Electrical connection: 230 V Own weight 80 kg Total size: L = 1000 mm x l = 800 mm x H = 1900 mm The machine has been tested and runs perfectly. Requires synchronization on the workflow with a transfer table/band and a bandwidth sensor. The labeller has a technical book and electrical drawings. For Romanian companies, there is the possibility of selling in instalments with a 50% advance. Price: 4,500 Euro + VAT, negotiable, FCA Oradea, Jud. Bihor, Romania A separate guarantee is provided upon request, for a fee. You can make us a firm offer if you are interested in this automatic labeller. We sell this labeller as it is”. Irrtum, Anderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale /  ...

20191 Brand Gearbox ZF Model Gearbox BW 191-1 Ratio 4.393:1 Power 480 kW RPM 1800 Serial Number 2113 General condition Taken out running condition Options Flexible Coupling SAE Housing Controls Mechanical Specific Features Brackets Oil cooler Weight (kg) 632 Dimensions (cm) 70 x 85 x 120