brake used for sale

Durma HAP 200 ton x 3100 mm Capacity: 200 ton x 3100 mm Backgauge: elec Passage between uprights: 2550 mm Max stroke: 185 mm Depth of throat: 260 mm Locking speed: 100 mm/sec Working speed: 7 mm/sec Returning speed: 73 mm/sec Length: 4270 mm Depth: 2400 mm Height: 2850 mm Weight: 12 ton Capacity: 200 ton Bending length: 3100 mm

CONTROLS   electronic controls WORKING RANGE PRESS BRAKE   total force (nominal): 85 to   Working length: 2050 mm   distance between columns: 1700 mm BENDING BEAM (Y-AXIS)   stroke: 215 mm ELECTRICAL SPECIFICATIONS   mains voltage: 400 V   mains frequency: 50 Hz DIMENSIONS / WEIGHTS   space requirements -left/right-: 2700 mm   space requirements -front/back-: 2000 mm   total height: 2400 mm   total weight approx.: 8300 kg

Geared motor with brake BAUER BS02-38H/DU04LA4-E/E003B4 0.06 kW 41 rpm 400 V IP54 shaft diameter: Ø 14 mm Flange diameter: Ø 80 / 110 mm used. tested ! Dimensions: 305 x 215 x 140 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3670 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 200 mm Locking speed: 100 mm/sec Working speed: 8 mm/sec Returning speed: 80 mm/sec Electric motor (power): 19 kW Length: 4330 mm Depth: 1950 mm Height: 2980 mm Weight: 17 ton

Servo Motor with Gearbox and Brake, Permanent Magnet Motor SEW KAF47 CM71S/BR/TF/RH1M/SB64 ( KAF47CM71S / BR / TF / RH1M / SB64 ) < br /> 3000 rpm < br /> 400 V IP65 SEW i 39,61:1 hollow shaft diameter: Ø 35 mm wavelength: 150 mm Groove width: 10 mm flange diameter: Ø 130 / 200 mm bolt circle diameter: Ø 165 mm 4x Bore: Ø 11 mm used, tested ! Dimensions: 580 x 220 x 210 mm

Servo Motor with Gearbox and Brake, Permanent Magnet Motor SEW KAF47 CM71S/BR/TF/RH1M/SB64 ( KAF47CM71S / BR / TF / RH1M / SB64 ) 3000 rpm IP65 SEW i 39,61:1 hollow shaft: Ø 35 mm flange: Ø 200 mm used, tested ! Dimensions: 580 x 220 x 210 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 150 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3750 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4700 mm Depth: 1700 mm Height: 2850 mm Weight: 11 ton

Geared motor with brake VEM Z1 BR 71.1/4 M301 0.25 kW 40 rpm 220 / 380 V IP44 Shaft diameter: Ø 24 mm Flange diameter: Ø 160 mm New !' Dimensions: 355 x 160 x 250 mm

Haco ERMS 230 ton x 4300 mm CNC Capacity: 230 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 450 mm Depth of throat: 300 mm Table width: 180 mm Locking speed: 200 mm/sec Working speed: 8 mm/sec Returning speed: 125 mm/sec Electric motor (power): 19 kW Length: 4320 mm Depth: 2000 mm Height: 2800 mm Weight: 15 ton

Gear Motor with Inverter and Brake SEW S67 DT80N4/BMG/MM07/MFP ( S67DT80N4 / BMG / MM07 / MFP ) < br /> MOVIMOT MM07C-503-00 0,0,0,0 15 / 0.75 kW 5.1 / 26 rpm 380 - 500 V IP54 shaft diameter: Ø 35 mm with control (MOVIMOT) ! used, tested ! Dimensions: 560 x 250 x 260 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 3500 mm Depth: 1700 mm Height: 2500 mm Weight: 8 ton

Geared motor with brake BAUER BG10X-11/D09SA4W-TH/EKK008B4HA/C1-SP 0.37 kW 64 rpm 400 V IP65 shaft diameter: Ø 25 mm brake mounted !' used, tested !' Dimensions: 620 x 230 x 180 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 3100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 2600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 12 kW Length: 3270 mm Depth: 1500 mm Height: 2460 mm Weight: 8 ton

Geared motor with brake VEM ZG2 BMREB 71 G 8-4 ( ZG2BMREB71G8-4 ) 0,0,0 22 / 0.4 kW 25 / 50 rpm 380 V 3AC IP44 shaft diameter: Ø 32 mm clutch with sprocket Ø 72 mm, 17 teeth spare part for Hohenstein RBT400 ! Two speeds! used, tested ! Dimensions: 620 x 210 x 250 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 135 ton x 4100 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3600 mm Max stroke: 130 mm Max distance between table -- ram: 325 mm Depth of throat: 250 mm Table width: 180 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 100 mm/sec Electric motor (power): 15 kW Length: 4270 mm Depth: 1500 mm Height: 2530 mm Weight: 11,5 ton

Geared motor with brake VEM ZG1 BMRZ 63 K4 ( ZG1BMRZ63K4 ) 0.25 kW 31.5 rpm 220 / 380 V IP44 shaft diameter: Ø 28 mm Flange diameter: Ø 160 mm used, tested ! Dimensions: 470 x 160 x 240 mm

3 assen: Y1 / Y2 / X bovenste en onderste Amada-systeemtooling Gerenoveerd door Haco in 2024 Capacity: 135 ton x 3600 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3150 mm Max stroke: 200 mm Max distance between table -- ram: 400 mm Depth of throat: 250 mm Locking speed: 100 mm/sec Working speed: 10 mm/sec Returning speed: 80 mm/sec Electric motor (power): 15 kW Length: 4200 mm Depth: 1700 mm Height: 2500 mm Weight: 9 ton Capacity: 135 ton Bending length: 3100 mm

Geared motor with brake SEW USOCOME R40DT63L 4B03 / HR ( R40DT63L4B03/HR ) 0.25 kW 74 rpm 220 / 400 V IP55 Shaft diameter: Ø 25 mm New ! Dimensions: 420 x 170 x 180 mm

3 assen: Y1 / Y2 / X bovenste Amada-systeemtooling Achteraf ingebouwd door Haco met Easybend 2D Touch-bediening Capacity: 200 ton x 4300 mm Backgauge: CNC Control: Easybend 2D Passage between uprights: 3700 mm Electric motor (power): 15 kW Weight: 18 ton Capacity: 200 ton Bending length: 4300 mm

Multi-disc brake, magnetic coupling FONAR OSTRZESZOW ETM-106-2H Control voltage: 24 V DC Hollow shaft diameter: Ø 36 / 40 mm ( spline shaft profile, 8 grooves ) Wavelength: 52 mm Groove width: 7 mm Flange diameter: Ø 135 mm / 150 x 150 mm Bolt circle diameter: Ø 165 mm Hole diameter: Ø 13 mm 5 Clutch discs New ! Dimensions: 150 x 150 x 52 mm

Multi-disc brake, magnetic coupling FONAR OSTRZESZOW ETM-106K-2H Control voltage: 24 V DC Hollow shaft diameter: Ø 36 / 40 mm ( spline shaft profile, 8 grooves ) Wavelength: 52 mm Groove width: 7 mm Flange diameter: Ø 135 mm / 150 x 150 mm Bolt circle diameter: Ø 165 mm Hole diameter: Ø 13 mm 5 Clutch discs New ! Dimensions: 150 x 150 x 52 mm

Cooling fan for engine brake, external fan LENZE A 29130 motor: 0.048 kW 220 / 380 V Inner diameter: Ø 154 mm New ! Dimensions: 156 x 205 x 156 mm

Standard configuration · Stable machine frame as a welded, all-steel construction · Ram (press beam), highly resistant to torsional forces · Electrohydraulic downstroke drive via proportional valves · Modern block hydraulics · CNC backgauge with rack-and-pinion drive, for X and R axis, · Safe adjustment of stop fingers from the front · Upper tool clamping system New standard clamping II, manual · Lower tool holder for EV dies, hydraulic clamping · Programmable shifting (2 positions) · Control system: TASC 6000 · Safety equipment: Integrated side doors and automatic back roll-top · Switch cabinet air-conditioning · Network compatible · Manual crowning, centrically adjustable Additional equipment · 5 axis backgauge system · Hydraulic upper tool clamping · CNC crowning · BendGuard safety device · Additional foot switch · 2 x front support brackets · Preparation ACB  ...

Key data: 50 t, 1600 mm, 200 mm

CNC Press Brake COLLY 502/A Numerical Command: CYBELEC type DNC 32 P-CM Capacity: Maxi length 2000 mm x 50 T Throat depth: 200 mm Distance between uprights: 1600 mm Back Gear Gauge 1 axe Defective cylinder Right cylinder joint to change Machine functional (only right cylinder joint to change) Voltage: 380 V Length: 2500 mm Depth: 2100 mm Total height: 2400 mm Weight: approx 4 T

A Promecam (Amada) APX 103 CNC press brake is available. Pressing force: 1000kN, working width: 3000mm, column distance: 2550mm, gap opening: 370mm, stroke: 100mm, column depth: 400mm, infeed speed: 70mm/s, bending speed: 9mm/s, return speed: 85mm/s, drive power: 10.5kW. Machine dimensions X/Y/Z: approx. 3500mm/2200mm/2300mm, weight: approx. 6400kg, control: Amada Operator, operating hours: 36261h. The press is still in operation, therefore the operating hours change continuously. Documentation available. On-site inspection is possible.

Bending Machine FEMAS PI 30.45 - 3000 x 45 t. - NC ESA 400, Information about technical data are not binding., Machine available subject to prior sale., Capacity: 450 Kn, Bending lenght: 3050 mm, Distance between shoulders: 2550 mm, Throath depth: 350 mm, Approach speed: 50 mm/s, Bending speed %smm/s: 10 mm/s, Return speed: 68 mm/s, Backgauge type: Motorized, Backgauge travel: 500 mm + R, Cn: ESA TRIA KLT 400 (3 axes), Main motor power: Kw 5,5, Weight: 5.500 Kg, Accessories: Tool set

Hydr. Press brake, die bending machine HAMBURGER JONESCHEIT type HYPM 70-2600Fabr. No. 4004 Year of construction 1987Printing capacity 70 ton. Working length 2600 mmStand width 2770 mmPlunger stroke 60 mmDistance table - ram max. 390 mmTable size 2750 x 200 mmMotor power 7.5 kWWet connection 380 volts, 50 Hz.- Crimping depth via mechanical fixed stop with electric adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm)- Upper tool,

A Hämmerle hydraulic press brake is available. Pressing force: 2000kN, working length: 2600mm, installation height: 830mm, stroke: 265mm, throat depth: 300mm, rapid traverse: 100mm/s. Machine dimensions X/Y/Z: approx. 3750mm/2600mm/3600mm, weight: approx. 16000kg. The machine is not functional. Documentation available. On-site inspection is possible.

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and temperature compensation ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Sta ...

A Durmazlar press brake distributed by Knuth is available. Pressing force: 35t, bending length: 1350mm, motor power: 5.5kW, stroke: 100mm, stroke rate: 17/min, max. operating pressure: 240bar, oil capacity: 150l. Machine dimensions X/Y/Z: approx. 1400mm/1400mm/2100mm, weight: approx. 1750kg, operating hours: 1258h. An on-site inspection is possible.

Standard configuration Machine ⦁ Stable machine frame for standing and sitting operation ⦁ Ram: stress relief annealed, optimized for few deformation ⦁ Electro-mechanic direct drive (Torque drive) ⦁ Inductive linear measurement system with temperature compensation ⦁ Switch cabinet air-condition ⦁ Ergonomic machine design Backgauge system ⦁ Highly dynamic backgauge system 3-axes X1, R1, Z1 Tool clamping ⦁ Upper tool system manual, non-hardened and self-centering for vertical tool change ⦁ Manual hardened lower tool clamping Control ⦁ Integrated machine control: TRUMPF TASC 6000, numerical shop floor programming ⦁ Windows XPe, Pentium M operating system, 1,1 GHz ⦁ 1 GB RAM memory ⦁ 15 touch screen ⦁ Network compatible Safety ⦁ Pivotable safety side-doors ⦁ Rear and side protective guard ⦁ 2-button foot switch for standing and sitting operation Addit ...

Pressing force: 2000kN, working length: 7200mm, connected load: 15kW, max. oil temperature: 45°C, max. operating pressure: 200bar, max. material thickness S235: 8mm, max. stroke: 215mm, max. closing speed: 200mm/s, pressing speed range: 1mm/s-10mm/s, stop time: 90ms, safety distance: 290mm, weight: approx. 38000kg. Including underfloor equipment and Fiessler AKAS 160 S safety system, year of manufacture: 2013. Documentation available. An on-site inspection is possible.

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and temperature compensation ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Sta ...

Stroke: 135mm, max. sheet thickness: 20mm, max. bending length: 3050mm, pressing force: 80t, max. operating pressure: 2975psi, max. die opening: 250mm, bending angle range: 1°-42°, oil capacity: 150L, max. tool weight upper/lower: 40kg/115kg. Machine dimensions X/Y/Z: approx. 4000mm/2050mm/2450mm, weight: approx. 6000kg. Documentation available. An on-site inspection is possible.

Standard configuration ⦁ Stable all-steel welded machine frame ⦁ Press beam with high bending stiffness ⦁ Electro-hydraulic upper beam drive via proportional valves ⦁ Modern hydraulic block system ⦁ CNC backgauge with rack-and-pinion drive for X and R axes; safe front-side positioning of backgauge fingers ⦁ New Standard Clamping II manual upper tool clamping system ⦁ Lower tool holder for EV dies with hydraulic clamping and programmable positioning ⦁ Pneumatic lower tool shift with two positions ⦁ Electrical cabinet air conditioning ⦁ Network connectivity ⦁ Manually adjustable central crowning system ⦁ TASC 6000 CNC control Additional equipment ⦁ 6-axis backgauge system ⦁ Hydraulic upper tool clamping ⦁ CNC crowning ⦁ Safety device BendGuard for 220 mm/s ⦁ Preparation ACB ⦁ Working area lighting ⦁ 2 banding aids ⦁ Parking position 900 mm

A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible.

This 6-axis TRUMPF TrumaBend V85S press brake was manufactured in 1998. It features a bending length of 2,550 mm, an 850 kN bending force, and a 6-axis back gauge. The Delem 65 CNC control enhances precision, while the electro-hydraulic twin cylinder drive ensures robust performance. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V85S machine we have for sale. Contact us for more information about this machine.

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes Tool holder ⦁ Manual upper tool clamping ⦁ Shifting: programmable Crowning ⦁ Manual crowning: Integrated in the table, manual adjustable crowning via wedges Lower Tool Adjustement ⦁ Lower tool adjustment CNC, programmable Safety ⦁ Standard Safety equipment Control ⦁ TRUMPF TASC 6000 Operation ⦁ Communication Track  ...

This 8-axis TRUMPF TrumaBend V170 press brake was manufactured in 2003. It features a pressing force of 1700 kN, a stroke of 365 mm, and a maximum bending length of 4080 mm. The distance between columns is 3680 mm. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V170 machine we have for sale. Contact us for further details regarding this machine.

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed: Highly resistant to torsional forces, of ample size ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system: with centered glass scales and temperature compensation ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Control panel: with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ Hydraulic oil filled in the machine (lifetime lubrication) Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydrauli ...

This Metallkraft GBP 31175 press brake was manufactured in 2022. It features a CNC-controlled DELEM DA-58T controller for precise bending sequence calculations and programming. The machine boasts a pressing force of 175 tons and a bending speed of 10 mm/s, with a motor power of 18.5 kW. It includes Italian-made tooling and Fiessler safety lasers for enhanced operation safety. Contact us for more information about this machine.

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic upper drive with 4-cylinder technology ⦁ Optical set-up and positioning assistant ⦁ Generous edge clearance ⦁ Flat front covers ⦁ Block hydraulics ⦁ Electronic pressure balance ⦁ Measuring system with centered glass scales and deflection compensation ⦁ Hydraulic oil filled in the machine (lifetime lubrication) ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design ⦁ TCB - Thickness Controlled Bending Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Hydraulic upper tool clamping ⦁ Hydraulic lower tool clamping, hardened ⦁ Lower tool shifting 2 positions, pneumatic Crowning ⦁ CNC crowning Control ⦁  ...

This IMAC FL 80-2500 press brake was manufactured in 2009. It features a maximum force of 800 kN and a table width of 2500 mm. The distance between uprights is 1990 mm, and it has a throat depth of 280 mm. With a motor power of 7.5 kW and a weight of 5200 kg, consider the opportunity to buy this IMAC FL 80-2500 press brake. Contact us for more information.

Standard configuration Machine ⦁ C frame ⦁ Press beam ⦁ Highly dynamic electromechanical direct drive ⦁ Distance measurement system (Y-axis) with dynamic deflection compensation ⦁ Electrical cabinet air conditioning up to an ambient temperature of 40 °C Backgauge system ⦁ 3-axis backgauge with carbon fiber gauge finger (X, R and Z axis) Clamping system ⦁ Manual TRUMPF upper tool clamp ⦁ Manual TRUMPF lower tool clamp Control ⦁ TASC6000 machine controller ⦁ Integrated TRUMPF technology data ⦁ Data transfer ⦁ Network capability ⦁ USB interface Operation ⦁ Foot switch Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Backgauge system ⦁ 6-axis backgauge system Ergonomic package ⦁ Comfort support table (front) ⦁ Comfort foot rest ⦁ Front work area illumination (LED) ⦁ Swiveling control panel ⦁ Sitting and standing aid ⦁  ...

This Durma AD-S 30135 press brake was manufactured in 2006. It features a ModEva 10S control unit and has accumulated 39,801 working hours. With a bending length of 3050mm and a tonnage capacity of 135t, its designed for robust performance. Consider the opportunity to buy this Durma AD-S 30135 press brake. Contact us for more information.

Standard configuration Machine ⦁ Box frame ⦁ Press beam ⦁ Spherical bearing of the press beam with press beam tilting ⦁ Electro-hydraulic upper drive ⦁ Block hydraulics ⦁ Distance measurement system (Y axis) with dynamic deflection compensation ⦁ Hydraulic oil filling (life-long filling) ⦁ Oil cooler Crowning ⦁ Self-regulating, combined crowning Backgauge ⦁ Gauge fingers (2 pieces) Tool clamping ⦁ Manual upper and lower tool clamp Control ⦁ T3500T Multi-Touch machine control ⦁ Integrated TRUMPF technology data Data transmission ⦁ USB interface ⦁ RJ45 network interface Operation ⦁ Operating unit with foot switches Safety ⦁ CE marking ⦁ Standard safety device Additional equipment Crowning ⦁ CNC crowning Backgauge system ⦁ 5-axis backgauge system : R1, Z1, Z2, X1, X2 (Delta X) Tool clamping ⦁ Hydraulic upper tool clamping Contr ...

This 4-axis Vimercati PHSI 100x3050 press brake was manufactured in 2005. It features a working width of 3050 mm, motor power of 9 kW, and a pressing force of 100 tons. The machine dimensions are 3500 x 2000 x 2700 mm, and it weighs 9700 kg. It includes a fully refurbished Cybelec control system. Consider the opportunity to buy this Vimercati PHSI 100x3050 press brake. Contact us for more information about this machine.

USED PROMECAM PRESS BRAKE 35T Year: 1986 Serial No.: T2 035 20 440 Power: 350 KN (35 Tons) Bending Length: 2000 Passage Between Upright: 1700 Maximum Stocked: 105 Equipped with 1 Electric Stop 1 MBC Programming Controller 1 Bending Lot V Dimensions and Weight 3350x2100xH1750mm - Weight: 2500 kg Auction-ID: A1-50950-64

This Warcom DINAMICA 100.30 press brake was manufactured in 2016. It features a maximum force of 100 Ton, a working length of 3200 mm, and a motor power of 11 kW. Weighing 10,500 kg, it operates with a maximum working pressure of 250 bar. If you are looking to get high-quality bending capabilities, consider the Warcom DINAMICA 100.30 machine we have for sale. Contact us for more information about this machine.

Standard configuration Machine ⦁ Stable machine frame as all-steel construction ⦁ Ram, stress relief annealed: Highly resistant to torsional forces, of ample size ⦁ Spherical ram suspension, with ram tilt ⦁ Electro-hydraulic downstroking drive with 4-cylinder technology ⦁ Modern block hydraulics with control valves mounted on the cylinder ⦁ Electronic pressure balance ⦁ Measuring system ⦁ Control panel with LCD panel, footswitch für Emergency up, down and E-STOP ⦁ Oil cooler ⦁ Switch cabinet cooling (air-air heat exchanger) ⦁ Modern machine design Backgauge system ⦁ Backgauge system 2-axes ⦁ 2 pieces back gauge fingers Tool holder ⦁ Manual upper tool clamping ⦁ Hydraulic lower tool clamping Crowning ⦁ Manual crowning Lower tool shifting ⦁ Lower Tool Adjustment Safety ⦁ Standard Safety equipment: Emergency Stop button, manual roller shutte ...