brake used for sale

Geared motor with two speeds and brake EBEHARD BAUER DP5A 202C FG5-111/429 ( DP5A202CFG5-111/429 ) 0.45 / 4.5 kW 14.5 / 285 rpm 380 V IP65 shaft diameter: Ø 55 mm used, tested ! Dimensions: 1050 x 330 x 610 mm

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.

Year of Make: 1998 Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Projection: 250 mm Weight: 18,900 kg + Tools

Geared motor with brake GROSCHOPP type: WK 0701401 ( WK0701401 ) 0.15 kW 50 rpm 230 / 400 V IP54 shaft diameter: Ø 12 mm aluminium housing used, tested ! Dimensions: 280 x 160 x 130 mm

pressure: 175 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec return speed: 135 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15,0 kW weight: 11.950 kg range L-W-H: 5100 x 2150 x 2850 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - ...

Stepper gear motor with brake, universal rotary tables with cam drive FIBRO Fibrotor type: EM.01.0160.9.132.04.0.0 360° rotatable in 90° steps 0.12 kW 230 / 400 V IP54 used, tested ! Dimensions: 360 x 330 x 170 mm

pressure: 100 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 410 mm ram stroke speed: 200 mm/sec work speed: 9.5 mm/sec return speed: 155 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 6850 kg range L-W-H: 3750 x 1950 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135.8 ...

Gear Motor with Brake SEW SF37DR63L4/BR/TF/C/IS 0,0,0,0 37 kW 35 rpm 220 / 380 V IP65 shaft diameter: Ø 20 mm Flange diameter: Ø 120 mm New !' Dimensions: 430 x 240 x 160 mm

pressure: 220 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 185 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 930 mm table width: 200 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 11286 kg Dimensions (HxWxD): 4550 x 2250 x 2850 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot ...

Gear Motor with Brake Flender Type: CF15-M1B2-P5/4NH ( CF15-M1B2-P5/4NH ) 0.18 kW 315 rpm 220/ 380 V frequency: 50 Hz shaft diameter: 20 mm used, tested ! Dimensions: 430 x 240 x 160 mm

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 185 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm back stop - adjustable: max. 800 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 14000 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 ...

Gear motor variable / adjustable with brake and slip hub GETRIEBEBAU NORD SK. 9032R-R 150U-90 L/4BR ( SK.) 9032R-R150U-90L/4BR ) 1.5 kW 2.2 - 14.1 rpm adjustable by handwheel 220 / 400 V IP55 slip hub / slipper clutch MAYR ROBA size 4 adjustable ! shaft diameter: Ø 30 mm used, tested ! Dimensions: 810 x 340 x 640 mm

Gear Motor with Brake and Tachogenerator SEW K157 CV180M4/BM/HR/TF/AV1H ( K157CV180M4/BM/HR/TF/AV1H ) 33 rpm 340 V 101 Hz ! IP54 shaft diameter: Ø 120 mm used, tested ! Dimensions: 1550 x 700 x 700 mm

pressure: 220 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 12906 kg range L-W-H: 5100 x 2250 x 2900 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135 ...

Geared motor with brake SEW RF60DT80N2BMG/Z 1.1 kW 45 rpm 230 / 400 V IP54 Shaft diameter: Ø 30 mm Flange diameter: Ø 160 mm New ! Dimensions: 600 x 200 x 180 mm

pressure: 320 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 140 mm/sec work speed: 10.5 mm/sec return speed: 150 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 240 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30.0 kW weight: 17082 kg Dimensions (HxWxD): 4550 x 2450 x 3200 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot ...

Geared motor with brake VEM ZG5 BMRE 100 L 4 ( ZG5BMRE100L4 ) 4 kW 40 rpm 2 20 / 380 V IP44 shaft diameter: Ø 75 mm Flange diameter: Ø 340 mm New !' Dimensions: 890 x 440 x 340 mm

pressure: 40.0 t chamfer lenght: 1270 mm distance between columns: 1050 mm column arm: 350 mm dayligth: 387 mm work stroke: 170 mm table height: 850 mm back stop - adjustable: 800 mm adjustment speed: 230 mm/min ajustment speed: 140 mm/sec working feed: 10.0 mm/sec return speed: 170 mm/sec total power requirement: 5.5 kW weight of the machine ca.: 3220 kg dimensions of the machine ca.: 2150 x 1650 x 2300 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 58T (TouchScreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by C ...

Geared motor with brake LENZE MDERAM 1071 - 12 / 0112 ( MDERAM1071-12/0112 ) GSS04 - 2MVAK - 071 - 12 ( GSS04-2MVAK-071-12 ) 0,0,0,0 25 kW 36 rpm 230 / 400 V IP55 shaft diameter: Ø 24 mm Flange diameter: Ø 160 mm New ! Dimensions: 550 x 225 x 200 mm

pressure: 160 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 250 mm ram stroke speed: 90.0 mm/sec work speed: 7.5 mm/sec return speed: 80.0 mm/sec work stroke: 160 mm dayligth: 395 mm table height: 900 mm back stop - adjustable: max. 800 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11.0 kW weight: 7524 kg range L-W-H: 4250 x 1900 x 2550 mm Furnishing: - DELEM CNC control model DA-66T graphic/touch screen 2D graphical programming 17 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface intuitive, graphical entry of profiles Automatic calculation of features: tool safety zones, Press force, bending tolerance, crown setting, stretched Length, embossing force, flattening, automatic rounding calculation Radius programming Graphic tool and product library Collision mo ...

Gear Motor with Brake SEW FHF37DT80K4/BMG/TH/ISU4 0.55 kW 58 rpm 400 V IP54 shaft diameter: 30 mm flange diameter: 160 mm New ! Dimensions: 460 x 340 x 180 mm

pressure: 80.0 t chamfer lenght: 2600 mm distance between columns: 2200 mm column arm: 250 mm ram stroke speed: 90.0 mm/sec work speed: 7.5 mm/min return speed: 60.0 mm/sec work stroke: 160 mm dayligth: 380 mm table height: 900 mm oil volume: 150 ltr. voltage: 400 Volt weight: 5227 kg range L-W-H: 3750 x 1950 x 2400 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - AKAS laser in front of the machine - manual crowning - Upper tool, deer foot - Lower tool, die block with 4Vs - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Servo motor with gearbox and brake, permanent magnet motor SIEMENS 1FT6102-8AH71-4SH1 4500 rpm IP65 320 V Gearbox:: ALPHA SP140S-MF2-20-1K1-25 i 20:1 shaft: Ø 60 mm flange: 210 x 160 mm used, tested ! Dimensions: 690 x 300 x 200 mm

pressure: 160 t chamfer lenght: 3760 mm distance between columns: 3250 mm column arm: 250 mm ram stroke speed: 90.0 mm/sec work speed: 7.5 mm/min return speed: 80.0 mm/sec work stroke: 160 mm dayligth: 395 mm table height: 900 mm oil volume: 200 ltr. voltage: 400 Volt weight: 8514 kg range L-W-H: 4910 x 1900 x 2550 mm Furnishing: - DELEM - CNC control model DA-58T - controlled axes: Y1 - Y2 and X - SICK light barrier in front of the machine - Upper tool, deer foot - Lower tool, die block with 4Vs - manual table crowning - SICK light barrier behind the machine - 2 front support arms - SIEMENS - electrical system - BOSCH / HOERBIGER hydraulic system - CE mark / declaration of conformity - Operating manual: machine and control - Safety manual: press brakes The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stepper Gear Motor with Brake FERGUSON, ZAE 2H2+FF100 BM ( 2H2+FF100BM ) M100F 0,0,0 75 kW 9.52 rpm in 180° increments 220 / 380 V IP54 shaft diameter: 50 mm used, tested ! Dimensions: 860 x 720 x 550 mm

pressure: 175 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 135 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90.0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 15.0 kW weight: 9450 kg range L-W-H: 4250 x 2150 x 2800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphic/touch screen 2D graphical programming 15 TFT color screen with high resolution Bending sequence calculation Product programming and real size display USB interface - Motorized backgauge with R-axis, on ball screws - X = 800 mm R =  ...

Geared motor with brake BAUER BG10X-11/D08SA4-TF-ST-SL-K 0.37 kW 64 rpm 400 V IP65 Shaft diameter: Ø 24 mm brake mounted !' used, tested !' Dimensions: 590 x 240 x 220 mm

pressure: 60.0 t chamfer lenght: 2100 mm distance between columns: 1700 mm column arm: 410 mm ram stroke speed: 160 mm/sec work speed: 10.0 mm/sec return speed: 165 mm/sec work stroke: 275 mm dayligth: 530 mm table height: 900 mm table width: 90.0 mm oil volume: 150 ltr. voltage: 400 Volt total power requirement: 7.5 kW weight: 5640 kg range L-W-H: 3250 x 1960 x 2750 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA 53T (touchscreen) - Motorized backgauge with R-axis, on recirculating ball spindles - X = 800 mm R = 250 mm with 2 stop fingers - controlled axes Y1 - Y2 - X - R - C (crowning) - electr. Crowning controlled by CNC - Upper deer foot tool with PS 135 ...

Geared motor with brake BAUER BG10X-11/D08MA4-ST-SL 0.37 kW 64 rpm 400 V IP65 Shaft diameter: Ø 25 mm brake mounted !' used, tested !' Dimensions: 540 x 240 x 220 mm

pressure: 220 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 180 mm/sec work speed: 10.0 mm/sec return speed: 160 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 160 mm oil volume: 300 ltr. voltage: 400 Volt total power requirement: 18.5 kW weight: 13800 kg range L-W-H: 5150 x 2250 x 3000 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles - X ...

Geared motor with brake and sine wave - speedometer SEW FH37/G DT904S4/BMG/HR/TF/ES1S/IS3 1.1 kW 98 rpm 220 / 380 V IP54 shaft diameter: 30 mm New !' Dimensions: 550 x 290 x 280 mm

pressure: 320 t chamfer lenght: 4100 mm distance between columns: 3600 mm column arm: 410 mm ram stroke speed: 140 mm/sec work speed: 10.5 mm/sec return speed: 150 mm/sec work stroke: 375 mm dayligth: 650 mm table height: 900 mm table width: 220 mm oil volume: 400 ltr. voltage: 400 Volt total power requirement: 30.0 kW weight: 22064 kg Dimensions (HxWxD): 5350 x 2450 x 3150 mm -------------------------------------------------- HIGH-SPEED hydraulic press brake with increased installation height increased cylinder stroke enlarged projection -------------------------------------------------- Furnishing: - DELEM CNC control model DA 66T - swiveling touchscreen control unit - 7 controlled axes: Y1 - Y2 - X - R - Z1 and Z2, as well as CNC crowning - electr. controlled backgauge X-axis = 800 mm / R-axis = 250 mm - on ball screws - controlled electr. Stop fingers Z1 + Z2 - split upper deer foot ...

Geared motor with brake LENZE DERAXX 071 - 32 ( DERAXX071-32 ) 12.12 622.10.2 0.37 kW 55 rpm 220 / 380 V IP55 shaft diameter: Ø 25 mm Flange diameter: Ø 140 mm used, tested ! Dimensions: 430 x 210 x 170 mm

Manufacturer: HACO Model: PPM 30150 Year of Manufacture: 2007 Voltage: 380V 50Hz Capacity : 3000 x 150T Find more here - / Contact us at -

Geared motor with brake and external fan LENZE B 10 R L K 4 - 012 H ( B10RLK4-012H ) GST07 - 2MVBR - 100 - 32 ( GST07-2MVBR-100-32 ) 3,br 0 kW 57 rpm 220 / 380 V IP55 shaft diameter: Ø 40 mm used, tested ! Dimensions: 810 x 260 x 290 mm

2 pieces of brake plates LA322482200, suitable for Fendt / Massey Ferguson / Laverda

Gear Motor with Brake BAUER G73-10/D1A4-283 3 kW 11 rpm 400 V IP65 shaft diameter: Ø 70 mm brake: GBZ 250 WS-HL 380 - 400 V AC / 180 V DC brake mounted !' used, tested !' Dimensions: 1070 x 470 x 430 mm

LA322147950, brake disc suitable for Fendt / Laverda / Massey Ferguson, price per piece

Gear Motor with Brake ABM Type: ZFB 12SO / G80 F4D 808-4 ( ZFB12SO / G80F4D808-4 ) 0,0,0,0 75 kW 430 rpm 230 / 400 volts 5 -100 Hz IP 54 / 55 flange Ø 140 mm used, tested ! Dimensions: 470 x 150 x 200 mm

Manufacturer: Prima Power Model: EP1030 Year of Manufacture: 2012 Technical Data: - Power Supply Range: 340–440 V - Frequency: 50/60 Hz - Max. Power Consumption: 10 kW - Operating Temperature (standard): +5°C to +30°C - Operating Temperature (with Fan - optional): +5°C to +35°C - Operating Temperature (with Air Conditioner - optional): +5°C to +42°C - Relative Humidity: 20% to 75% (temporarily up to 90%) - Sound Pressure Level at Workplace: 72 dB(A) - Max. Pressing Force: 105 kN - Max. Beam Opening: 600 / 650 / 700 mm - Stroke of Press Beam: 310 mm - Approach Speed (Y-axis return): 110 mm/s - Approach Speed (Y-axis approach): 110 mm/s - Working Speed (Y-axis): 10 mm/s - Stroke (X-axis): 550 / 1000 mm - Stroke (R-axis): 200 mm - Positioning Speed (X1-axis): 800 mm/s - Positioning Speed (R-axis): 200 mm/s - Positioning Accuracy (X1-axis): 0.01 mm - Positioning Accuracy (R-axis) ...

Geared motor with brake VEM ZG5 BMRZA 100 L 4 ( ZG5BMRZA100L4 ) 4,4,000 0 kW 50 rpm 220 / 380 V IP44 shaft diameter: Ø 75 mm Flange diameter: Ø 400 mm New ! Dimensions: 920 x 400 x 440 mm

A CNC sheet bending machine Amada is available. Working width: 4000mm, pressing force: 2200kN, stroke: 350mm, axes: 8. Machine dimensions X/Y/Z: approx. 5600mm/2650mm/3300mm, weight: approx. 18000kg, control: Amada. An on-site inspection is possible.

Geared motor with brake VEM ZG4 BMRE 100 L 6 ( ZG4BMRE100L6 ) 2,2,2 2 kW 25 rpm 220 / 380 V IP44 shaft diameter: Ø 60 mm Flange diameter: Ø 300 mm New !' Dimensions: 780 x 300 x 360 mm

Servo Motor with Gearbox and Brake, Permanent Magnet Motor ELAU SB105-30-08-05-19-S-01-64-BOKN 19192308-012 3000rpm IP64 Gearbox: PFEFFER & PARTNER RPLN 15-2 BK i 45:1 shaft: Ø 32 mm flange: 105 x 105 mm used, tested ! Dimensions: 660 x 140 x 110 mm -

Stepper gear motor with brake, universal rotary tables with cam drive SOPAP TSa 11000-8-360-200-D ( TSa11000-8-360-200-D ) 103.3 HZ 310 V IP54 used, tested ! Dimensions: 1500 x 1000 x 530 mm

An oil-hydraulic press brake built in 1978 is offered, max. pressing force: 2000kN, max. stroke: 250mm, max. operating pressure: 295bar. Control panel defective. Viewing is possible by arrangement.

Stepper gear motor with brake, universal rotary tables with cam drive SOPAP TSa 700-2-330-7-D ( TSa700-2-330-7-D ) 360° rotatable in 180° steps 0.3 / 1.5 kW 380 - 500 V IP54 used, tested ! Dimensions: 1300 x 710 x 380 mm

pressure: 160 t chamfer lenght: 3000 mm distance between columns: 2650 mm Control: Cybelec DNC 800 total power requirement: kW weight of the machine ca.: 16 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Geared motor with brake and freewheel shift FLENDER HIMMEL KF65-A90LI4- LSN ( KF65-A90LI4-LSN ) 1,1,000 5 kW 16 rpm 220-240 / 380-420 V IP54 shaft diameter: Ø 35 mm flange: 200 x 200 mm used, tested ! Dimensions: 770 x 400 x 250 mm

This 6-axis Warcom LOGICA 1250-60 press brake was manufactured in 2023. Consider the opportunity to buy this Warcom LOGICA 1250-60 press brake. Contact us for more information.