brake used for sale

The Hamburger HYPM 70 is a press brake machine manufactured by Hamburger Werkzeugmaschinen GmbH, a German company specializing in the production of metalworking machinery. The HYPM 70 model was introduced in 1993 and is a hydraulic press brake designed for bending and shaping sheet metal. It has a bending length of 2,050mm and a pressing force of 70 tons. The machine is capable of achieving a bending speed of 10mm/s and a return speed of 90mm/s, making it suitable for both small-scale and large-scale production. The HYPM 70 features a user-friendly interface with a digital display for accurate and precise bending measurements. It also comes with a range of safety features, such as a light curtain and a safety guard to protect operators from potential hazards. Overall, the Hamburger HYPM 70 is a reliable and efficient machine for metalworking and has been used by a wide range of indust ...

Brake shoe set, wheel brake, brake kit -Brakes: from GSL (German Standard Lift) aerial work platforms - universally applicable: can be used -with: return spring and brake lever -Number: 112 brakes available Price: per piece -Dimensions: 280/200/H110 mm -Weight: 2.2 kg/piece

Servo Motor with Brake, Permanent Magnet Motor, AC Servo Motor KUKA 1FK7101-5AZ91-1ZZ9-Z S06 ( 1FK7101-5AZ91-1ZZ9-ZS06 ) Item No.: 0000119766 3,3,3,3 3 kW 3750 / 5000 rpm 200 V IP65 shaft: Ø 32 mm flange: 193 x 193 mm used, tested ! Dimensions: 310 x 240 x 195 mm

Dematic roller curve right 90°-600-540 IR795 RA1653 Make: Dematic Running direction: 90° right running Roller width (RB): 540 mm conical, plastic coating Nominal/outer width (NB): 600 mm Inner radius (IR): 797 mm length: 1790mm Overall height frame: 132 mm Height including motor: 275 mm Motor MOVI-Mot 3x300-500V 0,37kW 1400 u/min max Brake 220-240V Gear motor: SEW WF20 DT71D4/BMG/Z/MM03 Conveyor speed: freely adjustable between 0,142 and 1,42 m/s with frequency converter Scope of delivery: without supports (please enquire if required) Features: Drive type: Round belt Construction year: 2001 condition: good (used) Nominal / inner radius in mm: 795 Nominal / outside width in mm: 600 Roll width in mm: 540 angle: 90° Driven: YES scope of delivery: without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will  ...

DC brake, braking device, electric motor brake -Manufacturer: HORSTMANN Antriebstechnik -Type: AER 4-008-39-0064 -Current: 150/100 Amps -Operating voltage: 400 V AC 50/60 Hz -Quantity: 1x power supply unit included -Dimensions: 115/230/H200 mm -Weight: 4.8 kg

Three-phase electric motor, with brake SEW DT90S4BM 1,000 1 kW 1400 rpm 220 / 380 V 3AC 50 Hz IP55 Design: B3, with foot Shaft diameter: Ø 24 mm Wavelength: 50 mm Groove width: 8 mm Motor base: 152 x 177 mm hole spacing ( parallel to shaft ): 125 mm hole spacing ( transverse to shaft ): 140 mm hole diameter: Ø 9 mm, length: 12 mm ( slotted hole across shaft) New ! Dimensions: 405 x 260 x 190 mm

brake drum -Bore: conical Ø 27 to 32 mm with keyway -Outer diameter: 220 mm -Inner diameter: 200 mm -Recess: Ø 67 mm -Number: 4 drums available Price: per piece -Weight: 6.5 kg/piece

Console, device, clamping angle, clamping table, clamping plate, support console -Support consoles: 2 pieces, from press brake Promecam STPC 250 40 121 -Support table extension: adjustable in height -Dimensions: 515/300/H785 mm -Transport dimension: 840/540/H310 mm -Total weight: 56 kg

DC motor with brake VEM WSM2.134.38.1311 TGL 34020/03 500 / 2000 rpm 210 V IP54 shaft: Ø 38 mm flange: 250 x 250 mm used, tested ! Dimensions: 750 x 250 x 250 mm

Fritsch Rollfix Pastry brake Pastry brake, total length 3000mm, belt with 600mm, roller width 630mm, with safety cage, mobile, 1Ph

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB8253-E -Input: DC 725V Imax = 15A -Output: Pav = 5.6 kW Ppk = 11.2 kW -Number: 5x converters available -Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.1 kg/pc.

Slack adjuster, manual adjuster, slack adjuster, brake slack adjuster, brake adjuster -Slack adjuster: for brake system -Type: BXL 281966 -Toothing: 10 teeth Ø 38/31 mm -Number: 2 available -Price per piece -Dimensions: 215/100/H70 mm -Weight: 3.2 kg/pcs

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module from CNC machining center Santenberg GTC S 2 -Type: EMB9352-E -Input: DC 725V Imax = 25A -Output: Pav= 19 kW Ppk = 32 kW -Quantity: 1x brake module available -Dimensions: 55/380/H185 mm -Weight: 2.3 kg

Servo motor with brake and pulse coder PARKER BAYSIDE GM090-B2D2D 0,0,0,0 89 kW 702 rpm 207 V shaft: Ø 20 mm flange: 90 x 90 mm used, tested ! Dimensions: 330 x 90 x 140 mm

Compressive force: 1000kN/100t, ram stroke: 200mm, max. operating pressure: 290bar, control: DNC70, safety distance: 166mm, overtravel time: 104ms, overtravel distance: 7mm.

Brake module, brake unit, brake chopper -Manufacturer: Lenze, brake module type EMB6032-G -Input: G 325 V DC -Output: G 375V DC 8.0A -Number: 2 modules available -Price: per piece -Dimensions: 215/150/H90 mm -Weight: 0.4 kg/pc.

Crowning for press brake, bending bench, die holder with displacement device -Manufacturer: HACO, die holder with crowning for press brake type PPES 30135 -Matrix length total: 3050 mm -Individual components: see photos -Transport dimensions: 3570/260/H405 mm -Weight 374 kg

Servo Motor with Brake and Pulse Coder FANUC ALPHA 6/3000 ( ALPHA6/3000 ) A06B-0128-B675 B-65142E 1,1,044 4 kW 3000 rpm 114 V shaft: Ø 19 mm flange: 130 x 130 mm New !' Dimensions: 365 x 130 x 175 mm

fabric-no.: 202 395 working length: 2550 mm output: 2000 KN tracking travel: 13 mm safety distance: 176 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Stop, depth stop, length stop for press brake, bending machine, guillotine shear... -Stop: for press brake, bending machine, guillotine shear ... -Reference: M16 x 2 -Dimensions: see photos -Quantity: 2 available -Price: complete -Dimensions: 345/175/H115 mm -Weight: 4.2 kg/pc.

electric clutch brake, clutch/brake combination, clutch-brake combination, -Manufacturer: KEB, clutch-brake combination -Type: Combibox see photo type plate -Voltage: 24 V -Shafts: Ø 19 x 40 mm -Bolt circle: Ø 90 mm / M8 -Dimension: 240/125/H155 mm -Weight: 3.8 kg

Three-phase electric motor with brake HEW Type: RF 71L/8-BB4 0,0,0 18 kW 670 rpm 230 / 400 V IP 54 shaft diameter: Ø 14 mm Flange diameter: Ø 104 mm used, tested !' Dimensions: 300 x 140 x 200 mm

An older Promecam press brake is available. Pressing force: 100t, bending length: 4000mm, throat: 400mm, stroke: 100mm, installation height: 300mm, weight: approx. 8500kg. On-site inspection is possible.

drawer cabinet, tool cabinet, steel cabinet, workshop cabinet, tool box -Brake piston reset tool: 22 parts -Contents: see photos -Dimensions: 200/340/H50 mm -Weight: 2.5 kg

electric clutch brake, clutch/brake combination, clutch-brake combination, safety brake, clutch brake, clutch brake unit -Manufacturer: Mayr, ROBA-RT clutch-brake combination -Type: ROBA-RT X1087398 -Voltage: 24 V -Shafts: Ø 24 x 50 mm -Dimensions: 280/155/H190 mm -Weight: 9.8 kg

Three-phase electric motor with brake MOLL - MOTOR Type: 5.5AZK 71C-8 B14 ( 5.5AZK71C-8B14 ) 0.18 kW 620 rpm 230 / 400 V IP 55 shaft diameter: Ø 14 mm Flange diameter: Ø 106 mm used, tested ! Dimensions: 285 x 140 x 190 mm

Brake module, brake unit, brake chopper, brake control module, brake rectifier -Manufacturer: SEW Eurodrive, brake control module -Type: BMV5.0 -Input: 24V DC -Quantity: 1x brake module available -Dimensions: 75/25/H95 mm -Weight: 0.2 kg

Tow hitch, trailer coupling, jaw coupling -Manufacturer: AL-KO, axle braked -Type: B 2000-4 -Brake: Type 3081 A -Brake drum: Ø 325 mm Recess Ø 160 mm / Bolt circle Ø 205 mm -Dimensions: see photos -Transport dimensions: 1750/660/H340 mm -Weight: 134 kg

Servo Motor with Brake, Permanent Magnet Motor, AC Servo Motor KUKA 1FK6101-8AZ91-1ZZ9-Z S43 ( 1FK6101-8AZ91-1ZZ9-ZS43 ) Item No.: 00-104-897 4,4,000 4 kW 3500 / 4000 rpm 186 V IP65 shaft: Ø 32 mm flange: 193 x 193 mm used, tested ! Dimensions: 3150 x 195 x 235 mm

-Brake module -Input: 375VDC 5.4 A -Output: PAV=70 Ppk=2KW -Number: 2x converters available Price: per piece -Weight: 3 kg

electric clutch brake -24 V -20 W -Power transmission: 15 Nm -Weight: 7 kg

Brake module, brake unit, brake chopper Manufacturer: Lenze, brake module type EMB8252-E -Input: DC 725V Imax = 2.7A Output: Pav = 70 W Ppk = 2 kW -Number: 6x converters available Price: per piece -Dimensions: 210/50/H170 mm -Weight: 1.4 kg

Three-phase electric motor, with brake, encoder and external fan LEROY SOMER LSMV112MG 4 kW 1455 - 1465 rpm 230 / 380 - 415 V 3AC, 50 Hz 60 Hz - operation is possible ! IP55 Design: B5 Shaft diameter: Ø 28 mm Wavelength: 60 mm groove width: 8 mm flange diameter: Ø 180 / 250 mm bolt circle diameter: Ø 215 mm hole diameter: Ø 15 mm New ! Dimensions: 545 x 250 x 300 mm

Brake module -Input: DC/PE 765 V Imax = 25 A -Output: Pav = 19 kW Ppk = 32 kW -Number: 4x converters available -Price: per piece -Weight: 3 kg

brake cylinder -Type: BX 3602 -Dimensions: 220/200/H250 mm -Weight: 5 kg

-Brake module -Input: 375 VDC 5.4 A -Output: PAV = 70 Ppk = 2 kW -Weight: 3 kg

DC motor with brake and tachogenerator VEM WSM2.134.52.1312 TGL 34020/03 500 / 2000 rpm 270 V IP54 shaft: Ø 38 mm flange: 250 x 250 mm used, tested ! Dimensions: 850 x 250 x 250 mm

Auction-ID: A1-41275-1

Auction-ID: A1-45188-115

Servo motor, DC motor, with tachometer generator and brake - encoder PARVEX T4C4BR0515 2660 rpm 200 V DC 12,, 4 A IP 55 Shaft diameter: Ø 19 mm Wavelength: 38 mm Groove width: 6 mm Flange diameter: Ø 40 / 76 / 114 mm Bolt circle diameter: Ø 95 mm 4x Tapped hole: M8 x 1.25, depth: 20 mm Tachogenerator: 20 mV per revolution New, with underlays ! Dimensions: 445 x 115 x 160 mm

Three-phase electric motor with brake ORIENTAL MOTOR 51K90GU - SWM ( 51K90GU-SWM ) 90 W 1300 rpm 200 V 3AC 50 Hz 60 Hz - Operation is possible ! Shaft with gear: Diameter: Ø 11 mm, Length: 20 mm, Teeth: 10 Flange: Ø 83 mm / 90 x 90 mm Bolt circle diameter: Ø 104 mm Hole diameter: Ø 7 mm approx. 0.5 m Connection cable Used, tested ! Dimensions: 200 x 107 x 92 mm

Gear Motor with Brake SEW Type: SA42LP71 D63L4B03/HR/TF ( SA42LP71D63L4B03/HR/TF ) with Brake 0,0,0,0 25 KW 30 rpm 220/ 380 V 50 Hz IP54 shaft diameter: 30 mm used, tested ! Dimensions: 520 x 150 x 220 mm

Transnorm roller conveyor 2229-660-600 RA2425 Make: Transnorm Roller width (RB): 600 mm Nominal/outer width (NB): 660 mm Length: 2229 mm Roller diameter: 30 mm Roller distance: 76 mm Motor Roller conveyors: no motor but with 2x pneumatic brake Brake area length: 500 mm Height frame: 90 mm Height with brakes: 200 mm Scope of delivery: without supports Optionally available: Supports Side guide one and both sides Condition: functional and visually good condition Features: Construction year: 2006 condition: gut Conveying length in mm: 2229 Nominal / outside width in mm: 660 Roll width in mm: 600 Roll division in mm: 76 Driven: NO scope of delivery: mit Bremsen, without supports and side guides For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be happy to help you plan and implement your projects. We look forward to hearing from you.  ...

Geared motor with two speeds and brake EBEHARD BAUER DP5A 202C FG5-111/429 ( DP5A202CFG5-111/429 ) 0.45 / 4.5 kW 14.5 / 285 rpm 380 V IP65 shaft diameter: Ø 55 mm used, tested ! Dimensions: 1050 x 330 x 610 mm

Working width: 2500mm, max. sheet thickness aluminium/steel/stainless steel: 3mm/2mm/1.25mm, feeding length range: 575mm-2500mm, feeding width range: 210mm-1500mm, max. bending height: 200mm, max. negative bend: 35mm, max. diagonal twist: 3300mm, rotary table position: 0°/90°/180°/270°, working height: 1150mm. Clamping stroke: 210mm, clamping force: 240kN, clamping lowering and return speed: 50mm/s, upper beam swivel range: 135°, upper beam swivel speed: 90°/s, lower beam swivel range: 135°, lower beam swivel speed: 90°/s. Machine dimensions X/Y/Z: approx. 4050mm/1600mm/2400mm, weight: approx. 13000kg. Documentation available. An on-site inspection is possible.