We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,266 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
CNC press brake make LOTZE type PZ 150Machine -No: 20327455 built in 1982 only 3200 operating hoursTechnical specifications:max.pressing force: 150 tmax.working length: 4500 mmTable width: 350 mmStand passage: 4000 mmInstallation height: 500 mmThroat: 200 mmTable height: 900 mmOpening width: 490 mmTable under the floor: 580 mmmot.backgauge: 5 - 1000 mmDownward speed idle max .: 100 mm / IUpward speed: 68.2 mm / lPress speed: 7.5 mm / lDrive power: 12.5 kWDimensions: 5400 x 2000 x 3500 mmWeight approx: 16000 kgwith- CNC control Cybelec DNC 70 (faulty) Control was retrofitted or converted in 1993- Universal die 90 x 90 divided, 4000 mm long- divided deer foot tool 4000 mm long, height 165 mm- Foot switch with two-hand release- Floor machineused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data ...
used
Hydraulic press brake make HM type JONO 20.075Machine -No: 1143, built in 2002Press force: 75 tWorking length: 2000 mmStop length: 180 mmWorking speed / down: 10 mm / sWorking speed / high: 19 mm / sHydraulic motor: 11 kWSupply voltage: 3x400 VAC / 50 Hz + N + PEControl voltage: 24 VAC + 24 VDCMax. Pressure: 180 barOil quantity: 125 lWeight: 5.5 tExternal dimensions: 2340 x 2205 x 1965 mmWith- Control SIEMENS SIMATEC OP 7xa0xa0xa0 for X + Y- shared reef foot tool- Univ. die- Footswitchused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC press brake make BEYELER type MZ 30 / 1550Machine -No: 59009 / 2817 built in 1990Technical specifications:Press force: 30 tBending length: 1550 mmDistance between columns: 1400 mmTable width: 80 mmStand projection: 205 mmInstallation height: 340 mmTable height: 890 mmInfeed speed: 130 mm/sec.Working speed: 11 mm/sec.Stroke:140mmDimensions L x W x H: 2150 x 1250 x 1750 mmTotal power requirement: 3.0 kWWeight approx.: 1.7 tWith- Defective control Euro II- cpl. upper and lower toolused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
CNC press brake make AMADA type APX 50.20Ser. -No: APX 50.20 A31213, built in 1993Technical specifications:max.pressing force: 50 tWorking length: 2085 mmPassage between the uprights: 1520 mmStroke: 100 mmThroat: 400 mmTable height: 950 mmOpening width: 370 mmWorking speed: 9 mm / sDelivery speed: 73 mm / sOpening speed: 85 mm / sExternal dimensions approx .: 2600 x 2250 x 2100 mmWeight approx: 3000 kgWith- a complete set of tools- Operator control- Two-hand operation- foot switch- Control defectiveusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Hydraulic press brake make EHT type APN 80Machine -No: 20377, built in 1970Max. Pressing pressure: 80 tTable length: 3550 mmTool length: 3550 mmDistance between the stands: 3050 mmStand projection: 250 mmRam stroke hydraulic: 100 mmPush stroke mechanical: 80 mmDrive power of the high-pressure pump: 11 kWDrive power of the gear motor: 0.75 kWPressure in the retraction system: 120 - 150 atüNitrogen loading in the accumulator: 80 atmContent of accumulator: 10 lContent of the oil tank: 280 lOil quality Hydraulic oil: 3 ° E at 50 ° COperating voltage three-phase: 380 volts, 50 HzControl voltage: 220 voltsDrive power: 12 kWWeight approx: 9550 kgExternal dimensions: 3565 x 1680 x 2700 mmusedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer ...
new
pressure: 135 t chamfer lenght: 3100 mm distance between columns: 2600 mm column arm: 410 mm ram stroke speed: 200 mm/sec return speed: 120 mm/sec work speed: 10,0 mm/sec work stroke: 275 mm dayligth: 550 mm table height: 900 mm table width: 90,0 mm oil volume: 200 ltr. voltage: 400 Volt total power requirement: 11,0 kW weight: 8.650 kg range L-W-H: 4.250 x 2.050 x 2.800 mm -------------------------------------------------- Press brake with special equipment increased installation height increased cylinder stroke as well as increased bending beam speeds -------------------------------------------------- Furnishing: - DELEM CNC control model DA-58T graphics / touchscreen 2D graphic programming 15 high definition color TFT screen Bending sequence calculation Product programming and display in real size USB interface - Motorized backgauge with R-axis, on recirculating ball spindles ...
used
Hydr. Press brake LAMI-NOVA (Spain) Type G-4180 Fabr. No. G-94472506 Year of construction 1994 Printing capacity 180 ton. Working length 4000 mm Projection 300 mm Stand width 3100 mm Ram stroke 200 mm Distance table - tappet max. 410 mm Table size 4050 x 188 mm Motor power 11 kW Mains connection 400 Volt, 50 Hz, approx. 18 kW - Lower tool with 6 different prisms (4050 mm long)- split upper tool (7 parts, 4250 mm) - manual adjustment of the press depth via handwheel with counter- motorized backgauge 750 mm - electric foot control and 2-hand control - 2 pieces material support arms foldable Space requirement L x W x H 4250 x 1700 x 2500 mm Weight 12 ton. good condition; used
used
Hydr. Press brake HAMBURGER JONESCHEIT Type HYPM 70-2600 Factory no. 4004 Year of construction 1987 Pressure capacity 70 ton. Working length 2600 mm, column width 2770 mm, ram stroke 60 mm, distance table - ram max. 390 mm, table size 2750 x 200 mm , engine power 7.5 kW , mains connection 380 volts, 50 Hz. - Pressing depth via mechanical fixed stop with electrical adjustment and mechanical depth indicator- Lower tool consisting of 2 segments, each 835 mm, with 2 different prisms (15 and 24 mm) - Upper tool, pointed angle approx. 88, tool height = 210 mm, 2 longer parts installed, plus several short segments - mechanical backgauge 900 mm, adjustment via hand crank with mechanical indicator - electric foot control and 2-hand operation - 2 pieces material support arms 600 mm Space requirements L x W x H 4600 x 1800 x 2600 mm Weight 4,2 ton. good condition; used
used
-Brake module -Input: 375 VDC 5.4 A. -Output: PAV = 70 Ppk = 2 kW -Weight: 3 kg
used
Brake cylinder -Type: BX 3602 -Dimensions: 220/200/H250 mm -Weight: 5 kg
used
Brake module -Input: DC/PE 765 V Imax = 25 A -Output: Pav = 19 kW Ppk = 32 kW -Number: 4x converters available -Price: per piece -Weight: 3 kg
used
-Brake module -Input: 375VDC 5.4 A. -Output: PAV = 70 Ppk = 2KW -Number: 2x converters available -Price: per piece -Weight: 3 kg
used
Ermak AP 2600 x 80 Press Brake Machine is in good condition 80 Ton
used
LVD PPEB 80 CNC Press Brake with tools Machine is in good condition Many tools come with the machine
used
Trumpf V50 1300 mm press brake 50 tons The machine is located in Spain.
used
Baykal APHS 31120 CNC Press Brake with 620 hours! Machine is in excellent condition Working hour : 620 Control Unit : CYBELEC ModEva 15T Motorized crowning
used
Baykal APH 3100x200 NC Control Press Brake Folding length : 3100 mm 200 Ton Machine is in good working condition
used
Dener Smart XL 4050x175 CNC Press Brake Tools are included Machine is like new condition
used
Dener DMP-CNC/200-30 CNC Press Brake Control Unit : Esa Bending length : 3100 mm 200 Ton
used
Durma AD-S 60400 CNC Press Brake 400 Ton Folding length : 6000 mm Machine is in good condition
used
Durma AD-S 30100 CNC Press Brake 100 Ton Bending Length : 3100 mm Number of axes : 4 Motorized Crowning Servo driver Machine is in very good condition
used
Baykal APH 4110x240 NC Press Brake Machine is in very good condition
used
Ermak Power-Bend Pro CNC Press Brake 135 Ton Number of axis : 7 Delem 66 control unit Machine is in very good condition
used
Ermak AP 2600-60 NC Press Brake Bending length : 2600 mm 60 Ton Machine is in good working condition
used
Durma AD-R 40175 CNC Press Brake Number of axis : 3 175 Ton Motorized crowning Machine is in good working condition
used
Ermak Power-Bend Pro 135 Ton CNC Press Brake Folding length: 3100 mm 135 Ton Machine is in good working condition
used
Amada HFE 220-3 CNC Hydraulic Press Brake 220 Ton 3000 mm bending length 8 axis Machine is in good working condition Working hour : 17700 Tools are included
used
Amada HF 50-12T Press brake cnc/nc Amada HF 50-12T 2005r HF 50-12T
used
Baykal APH 30180 NC Press Brake Machine is in good working condition 180 Ton Bending length : 3000 mm
used
Amada HFT 130-3L Press brake cnc/nc Amada HFT 130-3L 2007r 2007
used
Baykal APHS 3106X120 CNC Press Brake 120 Ton Number of axis : 3 Electronic panel has been renewed STEP RK12+ Touch Screen Control Unit Some tools are included
used
Hydraulic Press Brake make Colly Type PS 125/3 Year of construction 1991 Technical specifications: Max. Pressure capacity 125 t Work length 3100 mm Through 2550 mm Stroke 250 mm Drive power 9.0 kWwith - Tools - CNC Control Used, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
Ermak Power-Bend Pro 2100x60 CNC Press Brake 60 Ton Machine is in excellent condition
used
Durma AD-R 30135 CNC Press Brake Machine will be available February 2023 Wila tools
used
Hydraulic press brake make LOTZE type P 150/35Machine -No: 4850 built in 1966 completely overhauled in 1988Technical specifications:Printing capacity: 150 tWorking length: 3500 mmDimensions approx: 4000 x 1700 x 2500 mmWeight approx: 16 tWith- Upper and lower tool- pneumat. Back gaugeused, in very good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools
used
press brake AMADA FDB-5012E from 1989. Very good condition, used occasionally. Maximum bending length 1250mm, pressure 50t.
used
Durma AD-S 40320 CNC press brake Bending length : 4100 mm 320 Ton Delem Control Unit Wila tooling Automatic crowning
used
Ermak 3100 x 250 CNC Press brake Folding length : 3100 mm 250 Ton Number of axes : 4 Manual Crowning Fully revised machine
used
Durma CNC press brake All details in the catalog attached 1 meter extra area for front leverage arms. Just 1 meter park area means 12.000 euro extra
used
Durma AD-S 25100 CNC Press Brake Machine is in good working condition Servo Eva15t Screen Please contact us for further pictures(picture on product page is sample)
used
Durma AD-S 30175 CNC Press Brake Included tools Machine is in excellent condition
used
Baykal APHS 31120 CNC Press Brake Bending length : 3100 mm 120 Ton Delem control unit Machine is in excellent condition
used
Dener Servobrake 5020 CNC Press Brake Electric Servo Machine Bending length : 2040 mm 50 Ton Control Unit : Esa Automation S 675 W 21 Multi Touch High-Resolution Touchscreen Number of axis : 4 (Y1,Y2,X,R) Standard tools are included
used
AMADA ASTRO 100NT cnc/nc press brake Year 2006 100T
used
Durma AD-S 40400 CNC Press Brake 400 Ton Folding length : 4000 mm Machine is in good working condition
used
Synchronized electronic press brake Amada HFE M2 220/4 L Numerical control 8 axes with 2 sheet metal attendants 75 kg each managed by CNC
used
4000mm Cn press brake, 135 tons, 4 axes on the stops. Equipped with a Safe laser (for increased productivity). Sold with the following spare parts: Complete numerical control, motor/drive for stop axes, incremental rulers for Y axis.
used
Durma AD-R 40320 CNC Press Brake 320 Ton Number of axis : 4 (Y1,Y2,X,R) Tools Machine is in very good condition
used
Baykal APHS 31120 CNC Press Brake Machine is like new Folding length : 3100 mm 120 Ton Number of axis : 4 Delem control unit Machine is not used on material more than 1 mm thickness Tools are included
used
Baykal APH 3100 x 200 NC Press Brake Tools are included Machine is in good condition