brake lathe used for sale

Manual press brake Bending length 300mm Material thickness max. 2mm Knife widths 25, 50, 75 and 150mm Bending angle max. 90 degrees Condition: never used / new (5) Auction-ID: A7-48486-110

Manufacturer: DURMA Model: HESSE AD-R 30175 Year of manufacture: 2013 Type of machine: Edge bending machine / bending machine (press brake) Bending length: 3000 mm maximum Pressing force: 175 tons Control system: CNC control with graphic display, 4-axis controlled Connectivity: Network connection Bending capacity: Full bending width can be maximized at 8mm Table feature: Automatically controlled table pre-stressing Find more here - / Contact us at -

LVD DYNA CELL 40/15 EFLYear of manuf. : 2021 Control : 15 Touch B Panel PC Working length : 1530 mmPressing force : 400 kN____________Description:Technical SpecificationsMachine Type:Press Brake / Robotic Bending CellYear of manufacture:November 2021Operating hours:655 hNumber of bends:18,337Max. pressing force:400 kNWorking length:1,530 mmColumn width:1,530 mmMax. stroke:200 mmDistance between table and ram:400 mmWorking height:975 mmMax. working speed:25 mm/s Machine weightFeaturesControl:15 Touch B Panel PC (touchscreen) Angle measurement systemRobot:KUKA 6-axis robot KR12R1810 / ME-30-60-60Robot payload:12 kgRear stop:5-axis (X1, X2, R, Z1, Z2) made of aluminumGripper system:Combination gripper (equipped with six suction cups and a clamp)Safety system:Iris Lazersafe (bending line safety)Cell protection:Protective fence with electrically controlled access door

Bending lenght: 2500mm Tools, prisma included. Auction-ID: A7-48567-2

Bending lenght:3000mm Tools and prism included. Auction-ID: A7-48567-1

2x boxes; Blue tube for air and brake fluid; New; Auction-ID: A1-48399-80

Hydraulic CNC press brake EHT for sale. Press force: 1100kN, bending length: 3050mm, min./max. table-ram distance: 280mm/600mm, rapid approach speed: 100mm/s, working speed: 2mm/s-8mm/s, return speed: 100mm/s, backgauge adjustment range: 5-1000mm, backgauge adjustment speed: 200mm/s, backgauge vertical adjustment: +/-10mm, safety distance between tooling and operating elements: 120mm, stopping time: 75ms, stopping distance: 11mm, Control system: DAK 90. Machine weight: 8500kg. Documentation available. Inspection by appointment possible.

Power: 135 t Working parameters: folding length 4100 mm, upright passage 3600 mm, gooseneck 250 mm, apron stroke 120 mm Equipment included: PC 15 numerical control, 2 Y and X axes, rear gauge 800 mm, 2 front supports Conformity: type examination certificate granted to the P.P.E.S. series by the I.N.R.S. under no. 1332 PH 1583 V 04 91 Power supply: 380 V; Engine power 11 kW Year & Manufacturer: 1991, HACO Dimensions (mm): 4150 × 1650 × 2600 Weight (kg): 11500 Remarks: PPEB type 40135; serial no. 80022. Auction-ID: A1-48608-3

PROMECAM STPC 204 hydraulic press brake • Force: 200 T (2040 kN) • Bending length: 4100 mm • Passage between uprights: 3500 mm • Gooseneck: 400 mm • Stroke: 220 mm • Motor power: 17 kW • Delem DA-65W retrofit numerical control with 2D color graphics • 7 axes: Y1, Y2, X, R1, R2, Z1, Z2 • 2 front consoles on linear guides • New tooling line (punches + dies) • Power supply: 380 V / 50 Hz • Dimensions (mm): 4495 × 1885 × 3250 • Weight (kg): 14,200 • Condition: used, excellent visual condition• Year: 1987 Auction-ID: A1-48608-11

Brake bench for truck with bottom plate. Brake bench can be pneumatically lifted against the bottom of the vehicle. Auction-ID: A1-47406-273

Power: 150 t Working parameters: folding length 3100 mm, upright passage 2600 mm, gooseneck 250 mm, apron stroke 120 mm Equipment included: 800 mm manually operated rear gauge, 2 front supports, 2 Y X axes Conformity: approval granted to the PPH series by the I.N.R.S. under number 1332-PH-0904-V-0386 Power supply: 220 V; Engine power 11 kW Year & Manufacturer: 1990, HACO Dimensions (mm): 3150 × 1650 × 2600 Weight (kg): 11500 Remarks: type PPH 30150; serial no. 51962. Auction-ID: A1-48608-4

1 Bending aid with parking position Sometimes malfunctions 2 support arms 2 CNC controlled stop fingers 2 manual touch fingers Bystronic Angle Measurement System CNC controlled crowning delta Z touch finger Cabinet with tools Auction-ID: A1-47350-260

Additional information: Delem DA 66W.8-axis Y1 Y2 X1 X2 Z1 Z2 R1 R2 Tool line. Technical data: Power: 125 t Folding length: 3100 mm Upright passage: 2600 mm Gooseneck: 210 mm Engine power: 9 kW Apron stroke: 220 mm Year: 2004 Dimensions: 4300 x 1670 x 2750 mm Weight: 10,000 kg Auction-ID: A1-48608-7

COLLY 1406S hydraulic press brake• Cybelec DNC 60 numerical control for precise axis adjustment • Leuze Electronic ML500 optical safety sensors • Prismatic ram guidance for high precision • Double foot pedal and hydraulic control side panel • Adjustable front stops, integrated sheet metal support • Complete tooling: mounted punches and dies • Robust mechanically welded structure, suitable for steel bending, stainless steel, aluminum • Dimensions (mm): approx. 3000 × 1800 × 2500 • Weight (kg): approx. 8000 • Condition: used, good visual working condition• Year: 1972 Auction-ID: A1-48608-14

incl. extensive accessories WITHOUT lattice box Pick-up date: 10.08 - 12.08 Auction-ID: A1-48584-27

Working parameters: power 100 t, folding length 3100 mm, upright passage 2705 mm, gooseneck 420 mm, apron stroke 200 mm Equipment included: numerical control, 4-axis Y1, Y2, X, R Power supply: 400/415 V, 50 Hz, 15.2 A, 3 phases; motor power 10.5 kW; installed power indicated on plate 9 kW Year & Manufacturer: 2002, AMADA EUROPE S.A.Dimensions (mm): 3800 × 2090 × 2635 Weight (kg): 6500 Remarks: Serial no. V020505; number of hours 23398; maximum force indicated on plate 1000 kN; noise level <75 dB(A); total system response time 100 ms; minimum safety distance 350 mm; diameter of the test bar 30 mm. Auction-ID: A1-48608-1

Power: capacity 150 TON Working parameters: CNC hydraulic press brake Included equipment: HACO BC50 numerical control, bending tool, visible backgauge Compliance: FIESSLER ELEKTRONIK safety light curtains visible Power supply: 380 V Year & Manufacturer: 2003, HACO Notes: Type ERM30150; Serial No. 81756; Used machine with traces of wear and oxidation visible on some parts. Auction-ID: A1-48608-2

COLLY PS PRO 125/3 hydraulic press brake • Force: 125 T • Bending length: 3100 mm • Upright passage: 2600 mm • Gooseneck: 210 mm • Stroke: 310 mm • Motor: 9 kW – 380 V / 50 Hz / 3 Ph • Delem DA24E numerical control (3 axes Y1, Y2, X) • Complete tooling line (punches and dies) • Dimensions: 4300 × 1670 × 2750 mm • Weight: 9500 kg • Condition: used, good visual and functional condition• Year: 1995 Auction-ID: A1-48608-16

A hydraulic two-column press brake Atlantik is available. Press force: 135t, bending length: 3000mm, throat depth: 250mm, ram stroke: 120mm, overrun time: 84ms, safety distance: 134mm, machine dimensions X/Y/Z: approx. 3500mm/1700mm/2300mm, weight: approx. 6800kg. An on-site inspection is possible.

3 axis NC controlled (Y1, Y2 and X) Including set of press brake knives, multi-V bottom dies l=3000mm, and edge rubber. In and with steel mobile racking. Auction-ID: A1-48414-5

Max. working pressure 300 bar, max. stroke 180 mm Auction-ID: A1-48478-3

General Description TRUMPF TrumaBend V3200 CNC hydraulic press brake designed for high-precision sheet metal bending. Equipped with a TRUMPF TASC 6000 CNC control, hydraulic crowning, hydraulic upper tool clamping, CNC multi-axis backgauge, laser safety system and front support arms. According to the delivery conditions, dismantling and loading must be carried out by an authorized TRUMPF service provider. Technical Details Manufacturer: TRUMPF Maschinen Austria GmbH & Co. KG Model: TrumaBend V3200 Year: 2006 Machine No.: B0509A0020 Factory No.: F1032F Press force: 3,200 kN (320 t) Control: TRUMPF TASC 6000 CNC Hydraulic crowning Hydraulic upper tool clamping CNC multi-axis backgauge Laser safety system Approx. bending length: 4,400 mm Condition Very good used industrial condition. Machine was powered on during inspection with the CNC control displaying an active  ...

Unfinished trailer. Manual hydraulic pump Equipped with folding aluminum withers H30cm Ball coupling is missing Without running wheel No documents available Auction-ID: A1-46485-26

- No documents - Equipped with folding aluminum withers H30cm Auction-ID: A1-46485-85

Unfinished trailer. Electric pear control Equipped with folding aluminum withers H30cm Ball coupling is missing Without running wheel No documents available Auction-ID: A1-46485-25

- Load capacity: 1800kg. - 5 holes. - Unused. Auction-ID: A1-46485-36

- Load capacity: 750kg. - Equipped with 4 holes. - Unused. Auction-ID: A1-46485-78

Unfinished trailer. Electric pear control Equipped with folding aluminum withers H30cm Ball coupling is missing Without ladder rack Without running wheel No documents available Auction-ID: A1-46485-27

- Load capacity: 750kg. - Equipped with 4 holes. - Unused. Auction-ID: A1-46485-74

Manufacturer: TRUMPF Model: TruBend 7036 Type of machine: Press brake Mechanical problem: The machine hums and vibrates strongly after every brake function test.After activating any emergency stop, it resumes normal operation. No error message appears.Suspected cause: drives defective. Additional software problem: After the machine starts up, a blue screen occasionally appears.After switching the machine off and on several times, the message disappears and the machine starts normally. Find more here - / Contact us at -

Manufacturer: Boschert Model: Profi 56/2200 T Type of machine: CNC press brake Year of manufacture: 2014 Operating hours: 1984 hours Control system: License-free Cybelec SA control system. Included tooling: An extensive, original premium tool set from a well-known manufacturer,supplemented by a complete, immediately usable tooling package. Upper and lower tools 3 to 10 mm, approximately 30 sets. Dies 4 to 15 mm, approximately 30 pieces. Special punches and drawing punches. Own tool cabinet included. Additional equipment included: Thread cutting device and Suhner PowerMaster. Find more here - / Contact us at -

L + Z lathe HOLZMANN type ED 914GNMasch. No. 20265 Year of construction 2006Center width 800 mmTurning diameter over bed 300 mmCenter height over bed 150 mmTurning diameter over support 190 mmCenter height over support 95 mmSpindle bore 38 mmSpindle speed 70 - 1400 rpm. 9 stepsFeed longitudinal and flatChuck flange Short taper DIN 55029 D1-4 Camlock 63 mmTailstock inner taper MK 3Drive power 1.5 kWNet connection 400 volts, 50 Hz- Spindle speed over 9 gear stages - 4-jaws

Technical data: Completely overhauled in 2001 Circulation diameter over bed: 1000 mm Diameter in recess: 1120 mm Circulation diameter over bed slide: 690 mm max. height above floor: 1110 mm max. height above bed: 460 mm Bed width: 800 mm Width of recess in front of the plan disc: 550 mm

Tip height: 330 mm centre distance: 1500 mm circular diameter: bed 690 mm spindle bore: 82 mm spindle retainer: short taper size 8 taper tailstock: 6 MK spindle speed: 7.1-1400 rpm feeds: longitudinal/plan 0.05 112/0.025 56 mm / U thread pitches: 0.25-560 mm electrical connection: 380 V, 15 kW space: 3350 x 1800 x 1400 mm weight: 4800 kg

Tip height: about quilt 300 mm centre distance: 1500 mm circular diameter: upper bed 640 mm spindle bore: 67 mm spindle retainer: Gr. 8 taper tailstock: 5 MK spindle speed: 18 - 900 rpm feeds: longitudinal/plan 0.063 0.032 2.1 mm / U thread pitches: 0.5-14 mm electrical connection: 380 V, approx. 7.5 kW space: 1550 x 3100 x 1250 mm weight: approx. 3500 kg hardly used and therefore well-preserved bed lathe

Made in Italy machine according to DIN 8606 Tip height: 260 mm Turning diameter over bed: 520 mm Swing over carriage: 300 mm Centre distance: 1500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (24) 9-1600 rpm (option 11-2000 U/min) Engine output: 5.5 kW (option: 7.5 kW) feed Z-axis: (93) 0.028 6.43 mm / Rev Feed x axis: (93) 0.012 2.73 mm / Rev Thread, metric: (54) 0.5-224 mm Thread, Witworth: (55) 72 - 1/8 TPI Thread, module: (54) 0.5-112 mm Thread, Diametral Pitch: (54) 64 - 1/4 D.P.. Cross slide Lxw: 650 x 230 mm Transversal carriage stroke: 340 mm Upper carriage Lxw: 350 x 150 mm Upper carriage stroke: 150 mm Tailstock Quill diameter: 85 mm Tailstock Quill stroke: 200 mm Tailstock taper: MK 5 Weight: 3,100 kg Facilities: -Movement of the tailstock pneumatically supported -Acceptance Protocol according to DIN 8605, ...

Made in Italy machine according to DIN 8605: lathe with increased accuracy. Tip height: 215 mm Turning diameter over bed: 430 mm Swing over carriage: 240 mm Top width: 1,000 mm Bed width: 290 mm Spindle bore: 52 mm Spindle nose: Camlock 6 " Spindle speeds variable: 6 Spindle speeds: 60-2,000 rpm S6/S1 engine power: 4 kW (option: 5.5 kW) feed Z-axis: (38) 0.05 - 1.88 mm / Rev Feed x axis: (38) 0.02 1,084 mm / Rev Thread cutting, metric: (30) 0.45-20 mm Thread cutting, Witworth: (35) 80-1 3/4 TPI Thread cutting, module: (25) 0.25-10 mm Thread cutting, Diametral Pitch: (30) 160-3 1/2 D.P.. Cross slide Lxw: 370 x 190 mm Transversal carriage stroke: 240 mm Upper carriage Lxw: 275 x 115 mm Upper carriage stroke: 120 mm Tailstock Quill diameter: 60 mm Tailstock Quill stroke: 135 mm Tailstock taper: MK 4 Weight: approx. 2,000 kg Facilities: -Infinitely variable  ...

Made in Italy Peak: 300 mm Rotary diameter over bed: 600 mm Rotary diameter via sled: 380 mm Peak: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8 " Spindle speeds: (12) 16-1200 U/min Engine power: 9.2 kW (special equipment/standard: 7.5 kW) Reprimor Z-axis: (93) 0.028-6.43 mm/U Feed X-axis: (93) 0.012-2.73 mm/U Thread, metric: (54) 0.5-224 mm Threads, Witworth: (55) 72-1/4 x8 TPI Thread, module: (54) 0.5-112 mm Threads, Diametral Pitch: (54) 64 -1/4 D.P. Crossleigh hub: 340 mm Oberslitten hub: 150 mm Riding stock pinol diameter: 85 mm Riding stove pinol stroke: 200 mm Ridstock cone: MK 5 Weight: About 3,200 kg Facilities: -3-axis digital display -Step-by-step speed adjustment -Automatic lubrication of the management railways -LED lighting -Micrometer bed strike -9.2 kW engine instead of 7.5 kW -Quick change holder system mul ...

Tip width: 700 mm Tip height: 150 mm Circulation diameter over bed: 300 mm Bed width: 180 mm Spindle bore: 38 mm Mounting in the spindle bore: MK 5 Speed range, infinitely variable: 30 - 450 / 150 - 3000 rpm Range of longitudinal feeds: (14) 0.07 - 0.65 mm/U Area of plan feeds: (11) 0.03 - 0.12 mm/U Metric threads: (18) 0.2 - 3.5 mm Inch Thread: (21) 8 - 56 Gg/1" Pinole path: 85 mm Pinole holder: MK 3 Engine power S1 100%: 1.5 kW / 400 V Motor recording power S6 40%: 2.2 kW / 400 V Machine dimensions (W x D x H): 1380 x 640 x 500 mm Weight approx.: 235 kg without base Delivery: - Digital display - 3-jaw chuck PO3-160 mm steel version - Feed flange 160 mm - Solid grain tips - Interchangeable wheels - Quick-release steel holder size 20-2 with 2 straight inserts - Slip clutch - Micrometer longitudinal stop - Plan sled with top support - Frequency inverter ...

1 x L+Z lathe Colchester Mascot 1600/600 Built: c.1975 Very stable lathe. Ideal machine for locksmiths or agricultural machine mechanics. Technical data: Turning diameter over crimson: 710 mm Turning diameter over bed:432 mm Turning diameter via support:267 mm Turning length: 1,000 mm Spindle speeds:20 - 1600 rpm Spindle bore:76 mm Drive motor:5.6 kW Feeds: 0.6 - 10 mm/u Metric threads: 40 (0.4 - 14 mm incline) Machine weight approx.:2000 kg Room requirements approx.:l:2.65 x w:1.1 x h:1.6 m Accessories: 3 - Jaw lining UVA 310 mm 4 Set of change jaws Bfraed8ae0 Tripan quick-change system 4 x Interchangeable holder running counter tip in tailstock (MK 5) Countertip in spindle Alternating wheels Manual Mudguard complete documentation The machine can be inspected at our warehouse in Reichenbach under electricity.

Stepless guide and pull spindle lathe TC 250 V Peak height: 250 mm Circulation diameter via slide: 350 mm Orbital diameter in the croation: 695 mm Tip width: 1500 mm Spindle nose: DIN 55029, Camlock, size 6 Bed width: 305 mm Cross slide path: 272 mm Upper slide path: 155 mm Spindle bore: 80 mm Speed range, infinitely variable: (3) 30 - 2200 rpm Whitworth Thread: (45) 2 - 72 TPI Metric Thread: (39) 0.2 - 14 mm Diametral Thread: (21) 8 - 44 D.P.I Module Thread: (18) 0.3 - 3.5 module Longitudinal feeds: 0.04 - 1.00 mm/U Flat feeds: 0.02 - 0.50 mm/U Engine power: 5.5 kW Dimensions LxWxH, approx.: 2900 x 1175 x 2040 mm Weight, approx.: 2,200 kg characteristics: - Toolmaker accuracy - Stepless speed control (3 pre-level steps) - Finely-balanced main spindle - Stable machine bed with hardened and ground guides - One-piece cast base - Adjustable precision cone roll ...

Precision lathe with cycle automatic Make: Hamlet Model: E 70 x 2000 Year of construction: 1997 For food and feed shaft machining Technical data: Workspace Turning length: 2000 mm Swing over bed: 720 mm Swing over cross slide plan: 430 mm Displacement of the plan slide: 410 mm Bed width: 480 mm 3prpek3uq Spindle nose ACC. to DIN 55027: size 11 Spindle diameter in front bearing: 150 mm Spindle bore: 106 mm Inside taper of the main spindle: 112 metric Control: Siemens 805 Spindle gearbox newly stored according to the manufacturer ca. 2.500 EUR

Machine details Stock number 1105-03330 Machine type guide and pull spindle lathe Make ERNAULT-SOMUA Type Cholet 550 Year of construction 1990 Control type conventional Storage location FRANCE Country of origin France Delivery time immediately Freight base EX WORK price Technical details Turning diameter over bed 550 mm Turning diameter via support 500 mm Turning length 1100 mm Tip height 250 mm Spindle bore 52 mm Inner cone 136 Spindle speeds 32-1800 rpm Feeds - bed slide / lengthwise 0.05-07 mm/w Feeds flat slide 0.033-0.45 mm/min Total power requirement 13 kW Weight of the machine ca. 2,3 t Space requirement approx. 2870 x 940 x 1400 m Information accessories: PARAT steel holder 4 STUCK 3 bake lining dia 250mm 2 AXIS DIGITAL

Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system

Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC

Height tips 220 mm Useful length 1,000 mm 42 mm bar pass

Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working

Platò diameter: 1300 mm Used lathe in good condition, available unless sold.

peak heights: 250 mm point distance: 1500 mm bar pass: 105 mm