br used for sale

Submersible pump, coolant pump BRINKMANN TA303/370+001 Immersion depth: 370 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q = 160 l/min H = 18 m Engine: 1,1,5 kW 220 / 380 V New ! Dimension: 690 x 240 x 185 mm

Submersible pump, coolant pump BRINKMANN SFL 650/450-MV+211 Immersion depth: 450 mm Pump base: Ø 200 mm pump flange: Ø 250 mm Q = 400 l/min H = 8 m Engine: 2,2,2 kW 220 / 380 V with cutting device ! Dimension: 880 x 350 x 250 mm

Submersible pump, coolant pump BRINKMANN STA 607/670-Z+280 Immersion depth: 670 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q = 400 l/min H = 45 m Engine: 7,7,5 kW 500 V New ! Dimension: 1150 x 400 x 290 mm

Emulsion pump, submersible pump, coolant pump CET PRAHA 4AP71-2S Immersion depth: 270 mm pump base: 140 mm flange: 180 mm 0.37 kW 220 / 380 V used, tested ! Dimensions: 530 x 180 x 210 mm

Submersible pump, coolant pump BRINKMANN TB32/230 Immersion depth: 230 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q = 60 l/min H = 20 m Engine: 1,1,65 kW 220 - 250 / 380 - 440 V used, tested ! Dimensions: 550 x 235 x 180 mm

Submersible pump, coolant pump BRINKMANN TS21/110+001 Immersion depth: 110 mm Pump base: Ø 100 mm pump flange: 115 x 115 mm Q = 40 l/min H = 15 m engine: 0,63 kW 230 / 400 V used, tested ! Dimension: 330 x 210 x 140 mm

Submersible pump, coolant pump PUMPENBAU SCHULTE (BRINKMANN) FR 5-1941-1098 (TB25/220 ?) Immersion depth: 215 mm Pump base: 110mm pump flange: 130 mm Dimensions: 360 x 270 x 130 mm

Submersible pump, coolant pump BRINKMANN TA302/400-MUX Immersion depth: 420 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q = 160 l/min H = 12 m Engine: 1,1 kW 400 V 3AC used, tested ! Dimensions: 800 x 325 x 200 mm

Submersible pump, coolant pump BRINKMANN TC63/560-MUX Immersion depth: 560 mm Pump base: Ø 90 mm pump flange: Ø 130 mm Q = 60 l/min H = 55 m Engine: 1,1.0 7 kW 400 V 3AC used, tested ! Dimensions: 900 x 300 x 250 mm

Submersible pump, coolant pump BRINKMANN SAL1301/460+001 Immersion depth: 460 mm Pump base: Ø 200 mm < < br /> pump flange: Ø 250 mmbr /> intermediate flange: 320 x 320 mm Q = 900 l/min H = 11 m engine: 4,0 kW 220 - 240 / 380 - 420 V 3AC used, tested ! Dimensions: 620 x 320 x 320 mm

Emulsion pump, coolant pump CET BRNO 3COA2-12 Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min Engine: 90 W 220 - 254 / 380 - 440 V 3AC IP44 New, with documents ! Dimensions: 270 x 160 x 130 mm Dimensions ( packaging ): 300 x 160 x 190 mm

Emulsion pump, submersible pump, coolant pump CET BRNO 3COA10X-27 P1 Immersion depth (with / without intermediate flange): 200 / 270 mm Pump base: 140 mm Flange diameter: Ø 190 mm Q = 1,67 l/s Engine: 300 W 220 / 400 V used, tested ! Dimension: 450 x 370 x 190 mm

Emulsion pump, submersible pump, coolant pump CET BRNO 3COA10X-35 P1 Immersion depth: 350 mm Pump base: 130 mm Flange diameter: Ø 180 mm Q = 1,67 l/s Engine: 310 W 220 / 400 V used, tested ! Dimension: 530 x 300 x 180 mm

Submersible pump, coolant pump BRINKMANN STH360/460-EX+190 Immersion depth: 460 mm Pump base: Ø 200 mm Pump flange: Ø 250 mm Q = 240 l/min H = 140 m Engine: 10,00 mbr /br / 0 kW 2900 rpm 400 V 3AC IP55 used, tested ! Dimensions: 1080 x 460 x 260 mm

Submersible pump, coolant pump BRINKMANN TB63/120-G1MV+303 Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q = 75 l/min H = 2 m Engine: 0,,21 kW 220 - 240 / 380 - 420 V 3AC IP 55F used, tested ! Dimensions: 290 x 210 x 140 mm

Emulsion pump, coolant pump, gear pump CET BRNO, ELEKTRA 4CZB 05G Mounting depth: 50 mm Pump flange: Ø 130 mm Q: 0,015 l/s ( 0.9 l/min ) P: 300 kPa ( 3.0 bar ) motor: 0.08 kW 220 - 254 / 380 - 440 V 3AC IP54 New ! Dimension: 375 x 165 x 130 mm

Emulsion pump, coolant pump CET BRNO 2COA2-12 PO Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,0,4 bar ) 220 - 254 / 380 - 440 V 3AC used, tested ! Dimensions: 290 x 210 x 160 mm

Emulsion pump, coolant pump ELEKTRO NASOSOV ( ? ? ) PA - 22 ( - 22 ) Immersion depth: 100 - 190 mm ( infinitely adjustable ) Pump base: 166 x 125 mm Pump flange: Ø 180 mm bolt circle diameter: Ø 160 mm hole diameter: Ø 9,5 mm motor: 0.12 kW 2800 rpm 220 / 380 V 3AC IP44 used, tested ! Dimensions: 400 x 200 x 180 mm

Specifications Maximum pressure: 16 tons Power supply: 400V / 4kW Press force: 1.66 kg/cm² B Year of construction: 2006 Bale size: 1200x800x800 mm Productivity:- Bale weight: approx. 200-300 kg Price: on request

Ref. -No.: 10120 Manufacturer: BRIERLEY Storage location: Halberstadt Country of origin: Deutschland Workspace: 2,5- 32 mm

Condition: Very good condition

Manufacturer: Brandt KDF mit Fügefräsen, Type: Profiline KDF 670, Year: 2005, Barcode: 0,5-3, Min-max edge material mm: 120-3500, Work piece width min-max mm: 10-55, Min.-max. workpiece length in mm: 10-60, Edgeband height max mm: 20, Luftkissentische Einlauf: Umstellung von 2mm auf Fase automatisch, mit Vakuum: yes, mit Klemmung: yes, Machining cracks: yes, Fine milling: yes, Application of separation agent: yes, PU-EVA: yes, Laser technology: yes, kW Leistung Laser: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, with tool holders: yes, Nut Motore: yes, Type of scraper: yes, Number of tools per tool-magazine: yes, Number of sanding units: yes, Buffing unit: yes, Top pressure belt/roller: yes, Workpiece support: yes, Workpiece return: Rolle, Return type: yes, System dismantled: ca. 6700, FREE TEXT: ZHR 01, : ink Rückführung/ Verfügbarkeit ca. ab Jul ...

Manufacturer: Brandt, Type: Eckenkopierautomat, Year: ca.1995, Control: hand, Monting of the machine: 1 Fräsmotor mit<CRLF>tastung, Year :ca.1995

Manufacturer: Frenostat Bremsgerät Typ 2000 Hilger und Kern, Type: 400/60/3132000, Model: 137700,

Manufacturer: Brandt, Type: Optimat KD 77 C, Year: 1998, Program: Brandt, Work piece width min-max mm: 65, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 10, Edgeband height max mm: 60, Thickness of coiled edgeband max mm: 3, Vorschub min- max m/min: 11 , Premilling: no, Premilling: no, Mitre stations: yes, Glue system granulate/cartridge: Granulat, Mitre stations: yes, Radiusfräsen : yes, Schnellwechselmotore: yes, Flush/radius/chamfer milling: yes, Contour milling type: yes, Radius scraper: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Compressed air bar: 6, Noise enclosure: yes, Year :1998

Manufacturer: Brandt, Type: Optimat F 13, Work piece width min-max mm: 50, Edgeband thickness max mm: 0,5-3, Edgeband height max mm: 55, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 2 x 0,5, Work piece width min-max mm: 50,

Manufacturer: Brandt, Type: KE 22 F, Year: 1991, Edgeband thickness max mm: 20, Edgeband height max mm: 55, Thickness of coiled edgeband max mm: 3, Panel length min mm: 250, Work piece thickness min mm: 150, Coil magazine: yes, Feeding speed max m/min: 7-25, Machine lenght mm: 10000, Compressed air bar: 6, Premilling: yes, Strip magazin: yes, Trimming saw: yes, Flush/radius/chamfer milling: yes, Contour milling: no, Ziehklinge Radius: yes, Flat scraper: yes, Buffing unit: yes, Glue system granulate/cartridge: Granulat, Top pressure belt/roller: Rolle, KS 10 Bandschleifaggregat für Funier oder Massiv, Year :1991

Bank of 4x Bradley & Turton 120ton Upstroke Presses 20” / 500mm sq electrically heated platens Daylight adjustable 18” 2200psi 12” Ram diam. 12” stroke Return rams Solid state relay Hydraulic valve for Press up / down Quantity available: 4 complete with 1x pump unit.

Emulsion pump, coolant pump CET BRNO 2COA2-17 P1 Immersion depth: 125 mm ( measured ) Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,4 bar ) 220 - 254 / 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 290 x 210 x 140 mm

Manufacturer: Brandt, Type: KD 85, Year: 1998, Control: Homatic NC 21, Min-max edge material mm: 0,4-20, Work piece width min-max mm: 70, Min.-max. workpiece height in mm: 8-55, Min-max feed m/min: 7+25, Einlauflineal gesteuert: yes programm, Premilling: yes, Application of separation agent: yes, IR zone: yes, Power per lamp: 400 Watt, Coil magazine: yes, Strip magazin: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Radius milling axis adjustment: yes, 4 motors: yes, Grooves, slewable-controlled: yes, Radius scraper: yes, 4 motors: yes, Bonding part EVA: yes, Pre-smelting Kg/Hr: 8 Kilo, Number of sanding units: 3, Edge sanding: 1, Profile sanding top bottom: 2, Buffing unit: yes, Top pressure belt/roller: Band, Separation agent setup: yes, Compressed air bar: 6, Machine lenght mm: 10900, Noise enclosure: yes, FREE TEXT: Schiebeanschlag Einführung Rechtwinkliger Teile/Dr ...

Emulsion pump, coolant pump CET BRNO 2COA2-17 PO Immersion depth: 170 mm pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,0,4 bar ) 220 - 254 / 380 - 440 V 3AC used, tested ! Dimensions: 340 x 210 x 130 mm

Emulsion pump, coolant pump CET BRNO 2COA2-17 PO Immersion depth: 170 mm pump base: Ø 100 mm pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,0,4 bar ) 220 - 254 / 380 - 440 V 3AC used, tested ! Dimensions: 340 x 200 x 130 mm

Technical characteristics of the used BRAUN front lathe: Centre height: 800 mm Distance between the centres: 1600 mm Spindle hole: 105 mm NB: The technical data mentioned above, collected by the manufacturer's technical data sheet, are to be considered non-binding and subject to change without notice.

Manufacturer: Brünninghaus Kartonverklebeautomat, Type: XL.46 PA, Year: 1996, Control: hand, Carton size min. L x W x H mm: 120 X 120 X 150, Box dimensions max. L x W x H mm: 650 X 640, Year :1996

Submersible pump, coolant pump BRINKMANN SFT1300/490-W9MV+218 Immersion depth: 500 mm Pump base: 310 mm Q = 800 l/min H = 10 m Engine: 5,5 kW 220 / 380 V IP 55 used, tested ! Dimension: 1000 x 400 x 320 mm

x-travel: 600 mm y-travel: 410 mm z-travel: 520 mm Spindle Speed: 6000 U/min. table length: 840 mm table width: 420 mm engine output: 15 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Specifications Maximum pressure: 4 tons Power supply: 400V / 2.0kW Press force: 0.57 kg/cm² Year of construction: 2007 Bale size: 1000 x 700 x 800 mm Productivity:- Bale weight: approx. 70-120kg Price: on request Machine is fully functional, after renovation.

Ref. -No.: 10359 Manufacturer: BRINKMANN Year of construction: 2005 Type of control: CNC Storage location: Halberstadt Country of origin: Deutschland Tool holder type: Sauter Werkzeugrevolver Operating hours: 45000 Hours Further information: Hinged chip conveyor Coolant cleaning with 2 pumps Cooling system 1x jaw chuck without cooling mist exhaust system

Manufacturer: Brandt , Type: KS 25, Year: 1991, Min-max edge material mm: 0,5-3,0, Work piece width min-max mm: 60, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 14, Premilling: no, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, Flat scraper: yes, Bonding part EVA: yes, Top pressure belt/roller: Rolle, Werkstückunterstützung: yes, Freiplätze: keine, Year :1991

Manufacturer: BA, Type: 143, Year: 1992, Min.-max. workpiece length in mm: 250, Min.-max. workpiece height in mm: 60, Edgeband thickness max mm: 3, Panel length min mm: 250, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW-Leistung Motor: 0,5, Trimming saw: yes, Flush/radius/chamfer milling: yes, Machine lenght mm: 1000, Maschine vorführbereit: yes, Year :1992

Key data: 500 mm, 2550 mm, 3 St.

SPECIFICATIONS: Max. width of the work table mm: 500 Total length of the 2 work tables mm: 2,550 Number of knives: 3 Installed power kW: 5.0

• For the packaging of products in three-side sealed tubular bags made of half-tubular films (PP, PE, PVC). • Output max. 40 products/min • Product sizes min. (l x x h) 100 x 50 x 10 mm, product length unlimited • Infeed conveyor w 350 mm, l 2,000 mm • Welding width max. 380 mm • Infeed height max. 200 mm • Film width max. 550 mm • Foil roll diam. max. 350 mm • Film thickness 15-50 ym • Longitudinal and transverse sealing • Residual film rewinder • Print mark control • Perforating unit • Automatic operation via light barriers • PLC Siemens S5-100 CPU 103 • Lauer control panel • Drive 400V/50Hz/6kW • 2 spare welding bars • Shrink tunnel SC 4030 SD • Throughput width 450 mm, throughput height 300 mm • Roller conveyor, bars adjustable rotating/non-rotating • 2 heater fans • power 18 kW, contactor control

Manufacturer: Brandt , Type: KD 79/2 CF, Year: 2002, Min-max edge material mm: 0,5-3,0, Min-max feed m/min: 18, Axis control: no, Premilling: yes, Fine milling: yes, Application of separation agent: no, IR zone: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Pre-milling: yes, Bevel milling: yes, 2 motors: yes, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Buffing unit: yes, Top pressure belt/roller: Rolle, Work piece refeeding: yes, Year :2002

Manufacturer: Brandt , Type: F 10/100, Year: ca.2000, Control: hand, Edgeband thickness max mm: 3, Edgeband height max mm: 10-55, Feeding speed max m/min: hand, Milling units: 2, rotations controlled: 18000, kW output motor: 0,5, Inner radius in mm: 35, Suitable for shaped and straight parts: yes, Manual feed: yes, Mitre stations: yes, Year :ca.2000

Manufacturer: Brandt, Type: KS 23, Year: 1988, Min-max edge material mm: 0,5-12, Min.-max. workpiece length in mm: 150, Min.-max. workpiece height in mm: 10-50, Edgeband height max mm: 55, Min-max feed m/min: 12, Premilling: no, Coil magazine: yes, Strip magazin: yes, Min.-max. batten magazine mm: yes, Mitre stations: yes, Bevel milling: yes, Corner tracing type: no, Radius scraper: yes, Flat scraper: yes, Bonding part EVA: yes, Edge sanding: yes, Year :1988

Manufacturer: Brandt, Type: KD 99, Year: 1998, Control: Homatic, Min-max edge material mm: 0,4 - 3,0, Work piece width min-max mm: 62, Min.-max. workpiece length in mm: 160, Min.-max. workpiece height in mm: 60, Edgeband height max mm: 62, Premilling: yes, Bevel milling: yes, Corner tracing type: yes, 4 Motoren: yes, Nuten : yes, Radius scraper: yes, 4 Motoren: yes, Compressed air bar: 6, Machine lenght mm: 8740, Noise enclosure: yes, Rückführung Typ: yes, machine ready for demonstration: yes, Year :1998

Manufacturer: Brandt, Type: KTD 72, Year: 2002, Control: yes, Glue application: yes, Edgeband thickness max mm: 3, Edgeband height max mm: 50, Edgeband thickness max mm: 3, Thickness of coiled edgeband max mm: 3, Feeding speed max m/min: hand, Thickness of coiled edgeband max mm: 3, Inner circle min mm: yes, Total power kW: 8, Feeding speed max m/min: hand, Compressed air bar: 6, Wight approx. kg: 300, Required space L x W x H mm: 1500 x 1500 x1200, Year :2002

Manufacturer: Brandt Eckenkopiergerät, Type: FP 10, Edgeband thickness max mm: 3, Edgeband height max mm: 55, Working widht max mm: 80, Kopierfunktion single sided: yes, Tracing by roller: yes, Cycle time automatic: yes, Engine milling kW: 0,5, Compressed air bar: 6, Wight approx. kg: 150,

Inductive Linear Filling Machine Cable cross-section: 5 x 2.5 mm² fused with 16 A Compressed air connection: Dry and oil-free compressed air at least 6 bar Ambient temperature: 5°C - 30°C Maximum machine output: 10 fillings/min. – 70 fillings/min Sound level measured at a height of 1.5 meters and a distance of 1 meter. 72 dB measured in operation and without container transport. Emissions from the product, especially those caused by spillage of the product during the filling process, must be taken into account by the operator. Product Leading Seals: Silicone Item condition: well-maintained Availability: as of now Machine number: 820216 Maintenance: carried out annually Power supply: 230/380 V, 50 Hz, 2.0 kW

Materials: PVC PET-G // Film Width (Max): 4200 mm