br used for sale

Brinkmann SAL2500/840+001 Submersible Slurping Pump Manufacturer. Brinkmann Type: SAL2500/840+001 2200 l/min Power: 18.5 kW Voltage: 400 V Speed: 2955 1/min Depth: 840 Weight: 228 kg More submersible pumps new and used - you can find them in our shop! International shipping costs on request!

Breddo LORWW Liquifier Stainless, 50gallon liquifier, 200L jacketed mixing vessel, Motor 25Hp, 3Ph

Electric motor, three-phase motor -Power: 15 kW -Speed: 1450 rpm -Shaft: Ø 42 mm -Construction: B5 -Protection class: IP 33 -Price: per piece -Number: 2x available -Dimensions: 650/440/H350 mm -Weight: 142 kg

Electric motor, three-phase motor -Power: 0.9/1.5 kW -Speed: 720/1430 rpm at 50Hz -Shaft: Ø 28 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 460/285/H290 mm -Weight: 52 kg

electric motor, three-phase motor -Power: 0.6 kW -Speed: 925 rpm -Shaft: Ø 18 mm -Design: B3 -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 360/170/H240 mm -Weight: 22 kg

Waterfall shower, massage shower -Stainless steel sink -Pipe: Ø 89 mm -With eye shower -Dimensions: 680/H1020 mm -Weight: 17 kg

Complete sawmilling line composed by Hydraulic Carriage, logs turning, cross-cutter and sharpening machine.

I am selling a fully equipped edge banding machine BRANDT ProfiLine KDF 790, built in 2006: Configuration: Input stop can be adjusted by menu Manually adjustable joint milling Edge banding with preheating tank Material pressure zone can be adjusted by servo motor Pneumatically adjustable cross-cut saws Heavy milling at the top + at the bottom manually adjustable Radius milling top + bottom servo motor adjustable Groove saw unit at the bottom Round unit 2-motor servo motor adjustable Radius scraper blade R2 pneumatically adjustable / second set R1 included Scraper blade surface Polishing brushes Separator injection at the front Clean injection at the rear Working height adjustable by servo motor Material height 6-60mm Edge material thickness 0.4-12mm Feed speed up to 20m/min. Overall length including feed plate 7860mm Mileage status 1,650,000 meters glued. Incl ...

Polymer plant incl. motors, tanks and agitators, etc.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: turning jaw set, 4-piece hard -Jaw width: 38 mm -Dimensions: see photo techn. drawing -Dimensions: 130/150 / H90 mm -Total weight: 8.8 kg

Machine vise, sturdy vise, drill vise -Handover: in the current condition as viewed -Stop jaw: repair welding, support surface milled -Machine vice: clamping jaws 140 x 60 mm -Clamping depth: 210 mm -Dimensions: 500/230 / H110 mm -Weight: 21.7 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 34 mm -Overall dimensions: 130/100/H80 mm -Total weight: 5.5 kg

Bruks RR800 Capacity: at roller conveyor feed rate 60 m/min for logs with diameter 60 cm - 4 logs/min at roller conveyor feed rate 30 m/min for logs with diameter 60 cm - 3 logs/min Maximum removal 200 mm Max log diameter 800 mm measured 1500 mm from the root and Length min 3,2 m max 6,2 m Number of cutting tools 30 Cutting tool width 60 mm Cutting motor 37 kW, 1500 rpm Cutting length 900 mm Roller chain driver: gear reductior transmission motor of 2.2 kW Hydraulic unit 5,5 kW Total weght including main motor 5000 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, hard -Jaw width: 20 mm -Overall dimensions: 70/60/H55 mm -Total weight: 1.1 kg

Key data: 160 KW, 200 kVA, 400 V

Diesel Emergency Generator Type PDH16N with generator 6S160PN 200 kVA, 160 kW, 400V/3Ph/50Hz Built in 1971, only 772 hours run, mainly used in a hospital as an emergency generator

Bradley & Turton Upstroke Presses Tonnage: 50ton Electric Platens Double Daylight 15” (375mm) sq. platen Fully guarded With individual pump units

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: 70/60 / H50 mm -Total weight: 1.0 kg

Bruderer BSTA 200 High-performance automatic punching press. max. pressure: 200 kN 20 T Speed range: 100 – 600 spm Year of construction: 1990. Feed BBV on the left side. Adjustable stroke: 8; 13; 19; 25; 32; 38; 44; 51 mm Ram height adjustment: 51 mm Dimensions of the clamping plate (clamping plate): 510 x 400 mm Bed opening: 400 x 160 mm Max. distance of the tool width between the columns: 410 mm. Connected load: 36 kVA Power 400 V 50 Hz Control voltage: 24 V Machine dimensions: H 2540 x W 1661 x D 855 mm Machine weight: approx. 3100 kg Switch cabinet and control system. Including all original technical documentation in German. More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

sheet width: 2500 mm plate thickness: 3,0 mm distance between columns: 2620 mm true cutting angle adjustable: - back stop - adjustable: 850 mm cutting gap adjustment: - mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions: 3,2 x 1,8 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Robotic top loader which is currently taking flow wrapped bars and placing them into the infeed section of an automatic cartoner (which we also have for sale)

Bruker MPA FT-NIR Spectrophotometer Bruker NIR for the measurement of liquids in cuvettes or vials Furthermore, for the measurement of solids and semi-solid materials with the help of an integration sphere (diffuse reflection) Integration Ball PbS Detector 12800-3000 1/cm (780-2780nm) Te-InGaAs Detector 12800-4000 1/cm (780-2500 1/cm)

Automatic high speed cartoner which is currently packing boxes of cereal/protein bars.

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 012 H750 -Voltage: 24V/335Hz -Dimensions: 115/90/H60 mm -Weight: 0.3 kg

Horn, siren, bugle, bugle -Manufacturer: Brano, horn siren from pedestrian stacker JungheinrichTyp ERC 205 -Type: 321 705 003 H750 -Voltage: 24V/335Hz -Dimensions: 120/90/H75 mm -Weight: 0.3 kg

Hydraulic pump, oil pump, gear pump, vane pump, hydraulic unit -Manufacturer: Brueninghaus, hydraulic pump type OVS 0 28 DFR/30 R-PPA 12 N 00 -Pump: Nominal pressure 250 bar -Drive: Behncke QU FA 00L4B-41 -Power: 3 kW 1442 rpm -Dimensions: 620/300/H270mm -Weight: 50kg

Strapping machine, packaging machine, strapping machine, carton stapler, stapling pliers, pliers stapler, tensioning and sealing device -Tensioning pliers: sealing device for strapping -Band width: approx. 16 mm -Staples: approx. 19 mm wide, see photo -Dimensions: 480/100/H170 mm -Total weight: 3.6 kg

Stock number: 3904 PROCESSING Manufacturer: BRIDGEPORT, Type: VMC 1000 30 Machine NO.: 822918, Year of manufacture: 2002 Specifications: Table size 1150 x 580 mm Large table load 800 kg Longitudinal movement (X) 1020 mm Transverse movement (Y) 510 mm Vertical movement (Z) 500 mm Spindle cone ISO 40 Spindle speeds 6000 rpm Total power 25 KVA Tool changer 30 places Control Heidenhain Fabr. Accessories: Chip conveyance. Length: 2200 mm, Height: 2800 mm, Width: 3200 mm, Weight: 4400 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 18 mm -Dimensions: see photo techn. drawing -Total dimensions: 54/54/H42 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 17 mm -Dimensions: see photo techn. drawing -Total dimensions: 56/51/H42 mm -Total weight: 0.6 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 13 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/39/H30 mm -Total weight: 0.3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -4 set: hard jaws -2 set: soft jaws -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 480/320/H150 mm -Weight: 57.5 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws -Top jaws: for power chucks -2 set: hard jaws -7 set: soft jaws -Dimensions: see photos / technical. drawing -Price/sale: only complete -Transport dimensions: 700/450/H120 mm -Weight: 101.6 kg

Inv. Num. : 7787 Type: JR1.40 Producer: CMS Brembana Created: 2012 Parameters: Work table length: 2600 mm Work table width: 1700 mm A set of tools and gears for various tools (cup wheels/saws/chamfer discs) are available for the machine.

BRUDERER BSTA 25 Precision high speed punching press. Nominal capacity: 250 kN; 25 tons. Min./Max. number of strokes: 100/1500. Max width of strip: 200 mm. Adjustable stroke: 13, 16, 19, 25, 32, 38 mm. Fitted with roll feeder BBV 202/120 on left hand side. Feed length variable up to 120 [mm] max. Optional: Sound insulating cabin. Condition: good working and visual order. Oil pump. Oil cooler. Execution: 4 supports. Front and rear safety guards. Fitted on rubber feet. Table dimensions: 530 x 530 mm. Passage between the supports: Longitudinal 540 mm; Lateral 200 mm. Slide/Ram adjustment 51 mm. Documentation in German or English language included. Press weight cca. 4800 kg. Press dimensions: 2055 x 1355 x H26200 mm. More machines from brands Bruderer, Bihler, Soprem, Noxon, Huras, Schaal and Mabu on stock available on request

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 65/80/H45 mm -Total weight: 1.2 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 22 mm -Dimensions: see photo techn. drawing -Total dimensions: 80/90/H55 mm -Total weight: 1.8 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 36 mm -Dimensions: see photo techn. drawing -Total dimensions: 140/110/H85 mm -Total weight: 6.3 kg

-Sourdough Fast Fermenter -Model: BRSSF100 -Mobile on castors -completely in stainless steel -400 volts -1.5 kW -Year of construction 2012 -External dimensions approx.: 64x70x125cm WxDxH

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 28 mm -Dimensions: see photo techn. drawing -Total dimensions: 115/85/H75 mm -Total weight: 3,7 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 30 mm -Dimensions: see photo techn. drawing -Total dimensions: 105/90/H75 mm -Total weight: 3,6 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/60/H55 mm -Total weight: 1,2 kg

Fabr. No.: 8288/60

I am selling a fully equipped edge banding machine BRANDT Optimat KDF 220 C, built in 2014: Configuration: Input stop manually adjustable Manually adjustable joint milling Edge banding EVA glue / PUR glue possible Material pressure zone manually adjustable Cross-cut saws pneumatically adjustable Radius milling at the top + bottom manually adjustable Round unit 1-motor manually adjustable Radius scraper R2 can be adjusted pneumatically (set R1 included) Control panel Working height adjustable by servo motor Material height 8-50mm Edge material thickness 0.4-3mm Feed speed 10m/min. Length including feed plate 4150mm Weight 1320kg Very good condition, fully functional ! Including full documentation and CE. Available the same.

CNC controller: FANUC Series 18i-MB Axes X-axis travel mm: 800 Y-axis travel mm: 540 Z-axis travel mm: 540 Distance spindle nose - table surface mm: 45 - 685 Worktable Table dimensions mm: 925 x 540 Max. workpiece weight kg: 700 T-Slot version: 18 Spindle Spindle speed rpm: 8.000 Tool system Tool magazine slots: 30 Max. Tool Diameter: 76 Max tool weight kg: 8 Equipment Chip conveyor Machine running times Under power: 24.000 Basic machine dimensions / weight Length mm: 2.955 Width mm: 2.137 Height mm: 2.713 Weight kg: 6.500

Planetary Manufacturer: Brevini Model No.: B2007962 ED2150 The device is NEW and fully functional. see pictures for more details.

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Rotary jaw set for four-jaw chuck, hard -Jaw width: 20 mm -Dimensions: see photo techn. drawing -Total dimensions: 70/80/H50 mm -Total weight: 1.5 kg

Interchangeable jaws, top jaws, three-jaw chuck, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks -Jaw width: 14 mm -Dimensions: see photo techn. drawing -Total dimensions: 48/42/H33 mm -Total weight: 0,3 kg

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, stepped block jaws, stepped top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw chuck, soft -Jaw width: 24 mm -Overall dimensions: 100/90/H80 mm -Total weight: 3.1 kg

Hydraulic Pump Manufacturer : Rexroth / Brueninghaus Article: L A6VM 250 HD3 / 63W -VZB - B - SO154 Condition : New

Interchangeable jaws, top jaws, three-jaw chucks, segment jaws, clamping jaws, step block jaws, step top jaws, block jaws, base jaws, 4-jaw set -Top jaws: Jaw set for three-jaw lathe chucks, hard -Jaw width: 20 mm -Dimensions: see photo technical. drawing -Total dimensions: 70/60/H55 mm -Total weight: 1.1 kg