br gbr used for sale

3-roll crusher Breschard (for glass) Brand: Breschard Type: LS 180-30T Inlet opening: 650 x650mm Dim. rollers: width 500 mm, Ø 300 mm Number of rolls : 3 pieces (1 upper + 2 lower) Crushing gap approx. 30 mm Propulsion : 18 kW electric motor Available on stock: 2 pieces.

Irco Breuning Profimat 100.8340.8 Year of construction: 2001 what installed on an Index G300 (2003). Channels are available from Ø60mm in 5mm increments to Ø100mm.

Guide bush FF605 Ø3.0 mm F. Britsch

Coolant manifold Britsch KUE101997VERT New 3 pieces

Coolant manifold Britsch KUE101997VERT New 3 pieces

Set of coolant accessories Britsch Includes, among others. KUE102529 Kühl Flex HEB Winktelstekcer mit CU Rohr 180mm KUE101991LEIT Kühl Flex HEB MiniPlug Leitungsset gerade 300mm (3x) KUE102247 Kühl Flex HEB MiniPlug Leitungsset wangled 100mm and much more.

Set of compression collets 138E Britsch Composed of 5 pieces Ø3.0mm 2 pieces Ø4.3mm

Machine type: Bronx six-roll straightener 6CR 4BW incl. saw and roller tables Working range: Tube: from Ø 15 mm to Ø 54 mm Make Bronx, similar to Kieserling, type: Bronx 6CR 4BW

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3200 kg -Chain length: 1.5 m -Dimensions: 700/300/H160 mm -Weight: 22 kg

Lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 3200 kg -Chain length: 3.2 m -Dimensions: 700/400/H160 mm -Weight: 31 kg

Temperature controller, temperature sensor, setting for temperature, signal converter, temperature converter -Type: PXT-10.924 -Number: 2x sensors available -Price: per piece -Weight: 0.2 kg

Sewing machine switch with sewing light CET KROMPACHY POS 8 P1 2,0 A 380 V 3AC 50 Hz Sewing light: 24 V AC IP 50 used, tested ! Dimensions: 290 x 160 x 140 mm

Sewing machine switch with sewing light CET KROMPACHY POS 3 P1 2,2 A 380 V 3AC 50 Hz Sewing light: 24 V AC IP 50 used, tested ! Dimensions: 290 x 160 x 140 mm

Remote control, machine control, regulator CET BRUMOV DR 20 ( DR20 ) with 9.0 m cable used, tested ! Dimensions: 250 x 120 x 120 mm

Coolant pump (booster pump) BRINKMANN UH 45-54+001 Q = 30 l/min H = 168 m engine: 3.3 kW 220 / 420 V New ! Dimensions: 1030 x 290 x 220 mm

Three-phase electric motor, pump replacement motor BRINKMANN TH 90 4,0 kW 2900 rpm 230 / 400 V 3AC 50 Hz IP 54 Shaft diameter: Ø 14 mm Wavelength: 30 mm groove width: 5 mm Flange diameter: Ø 112.5 / 180 mm used, tested ! Dimensions: 465 x 225 x 270 mm

Electric motor BROOK CROMPTON Type: D160 LD ( D160LD ) Engine power 15 kW Speed : 1460 rpm Voltage: 220/ 380V eddy current coupling: 180 CD4/2 Power: 12.3 kW Speed: 1275 rpm 90V, 3.3 Ad.C. protection class: IP23 PYE Dimensions: 1040x450x500 mm

Stepper motor MEZ NACHOD, ZSE PRAHA Type Z42RS145 1.88 Nm 1.8 degrees/step 7.0 A 830 Hz Flange: 95 x 95 mm Shaft: Ø 8 / 9 mm New Dimensions: 180 x 95 x 120 mm

Farrel Bridge 12” x 6” Two Roll Mill Year (July) 1988 Crompton Parkinson Motor 380volts

Farrel Bridge Lab BR Mixer Steam / water pressure gauges Burrell process timer BHI control Capacity of chamber 1.6 litre Motor With Gearbox

Used steam boiler made by Cleaver Brooks, capacity 2000 kg of steam/1 hour and a pressure 9 bar. New 1997. Gas burner. Working medium steam, permissible temperature 178 degrees Celsius. Heated area 117 m2.

Cantilever rack, one-sided, frame height 2.60m height, 80cm deep arms, 750kg per arm, hot-dip galvanized - new - : Price from location incl. loading! Price: 1.515.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units out of them by omitting or buying additional frames (or also by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new product Description: - Shelf stand on one side 2,600 mm high, hot-dip galvanized - Base and arm depth 800 mm - With 3 height-adjustable shelf arms each - Load capacity at centre of gravity 400 mm - 750 kg per arm / 2..250kg per stand with 4 stands per arm level 4 x 750 kg = 3,000 kg P ...

3000l/h Liter per hour: 3000 More then 300 machines new and second hand on our seema .de

LA322147950, brake disc suitable for Fendt / Laverda / Massey Ferguson, price per piece

Centrifugal fan, centrifugal fan, centrifugal fan with drive function MEZ MOHELNICE 4AP71-2 impeller: Ø 140 mm Connections: Ø 90 / 130 x 70 mm motor : 0,, 55 kW 220 / 380 V 2820 rpm shaft diameter: Ø 14 mm diameter V-belt pulley: Ø 69 / 51 mm IP54 used, tested ! Dimensions: 430 x 280 x 270 mm

Emulsion pump, coolant pump CET BRNO 2COA2-12 PO Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 40 l/ min p: 0,0,2 atm ( 1,18 bar ) 0,14 kW 220 / 380 V 3AC used, tested ! Dimensions (pump only): 290 x 170 x 130 mm Dimensions (packaging): 390 x 230 x 130 mm

Submersible pump, coolant pump, emulsion pump, BRINKMANN TA 600/440 Immersion depth: 440 mm pump base: Ø 140 mm pump flange: Ø 180 mm motor: approx. 1.1 kW 220 / 380 V 3AC 50 Hz used, tested ! Dimensions: 685 x 245 x 180 mm

Emulsion pump, coolant pump MEZ BRNO 3COA2-22 Immersion depth: 220 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 0,42 l/s ( 25.2 l/min ) 220 - 254 / 380 - 440 V 3AC 50 Hz IP44 used, tested ! Dimensions: 370 x 190 x 130 mm

Emulsion pump, coolant pump CET BRNO 2COA2-22 P0 Immersion depth: 220 mm pump base: Ø 100 mm pump flange: Ø 130 mm Q: 63 l/ min p: 16 kPa ( 0,0,16 bar ) motor: 0.16 kW ( 160 W ) 220 - 254 / 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 390 x 150 x 130 mm

Emulsion pump, coolant pump, with tank CET BRNO 2COA2-17 PO Immersion depth: 170 mm Pump base: 100 mm Flange: 130 mm Q: 63 l / min P: 16 kPa ( 0,16 bar ) Engine: 0,16 kW 220 - 254 / 380 - 440 V 3AC 50 Hz Tank volume ( total ): approx. 30 l usable volume: approx. 25 l used, tested ! Dimensions: 530 x 305 x 440 mm

emulsion pump, coolant pump, with tank, mobile CET BRNO 3COA2-12 PO Immersion depth: 120 mm Pump base: 100 mm Flange: 130 mm Q: 25,2 l / min ( 0.42 l / s ) engine: 220 - 254 / 380 - 440 V 3AC 50 Hz 0.4 - 0.5 / 0.23 - 0.29 A tank volume: approx. 20 l Chassis: 2x fixed castor, 1x swivel castor, without brake used, tested ! Dimensions: 520 x 390 x 670 mm

Emulsion pump, coolant pump, with tank CET BRNO 3COA2-22 PO Immersion depth: 220 mm Pump base: 100 mm Flange: 130 mm Q: 25,0 l / min ( 0.42 l/s ) P: 40 kPa ( 0.4 bar ) motor: 220 - 254 / 380 - 440 V 3AC 50 Hz 0.4 - 0.5 / 0.23 - 0.29 A tank with oil and dirt separator usable Tank volume: approx. 30 l used, tested ! Dimensions: 460 x 410 x 430 mm

Emulsion pump, coolant pump, with tank MANSFELD MHR-1 Pump: MEZ BRNO 2COA2-22 PO Immersion depth: 220 mm Pump base: 100 mm Flange: 130 mm Q: 63 l / min ( 1,1,min 05 l/s ) P: 0.16 atp ( 0.16 bar ) Engine: 0.16 kW ( 160 watts ) 220 - 254 / 380 - 440 V 3AC 50 Hz tank with oil separator and dirt filter usable tank volume: approx. 6.3 l used, tested ! Dimensions: 440 x 160 x 410 mm

Emulsion pump, coolant pump, without pump housing CET BRNO 2COA2-22 P0 Immersion depth: 220 mm Pump base: Ø 100 mm Pump flange: Ø 130 mm Q: 25 l/ min p: 40 kPa ( 0,4 bar ) motor: 0.16 kW ( 160 W ) 220 - 254 / 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 375 x 170 x 130 mm

Submersible pump, coolant pump, emulsion pump, BRINKMANN TA250/200-56MVZ+721 Immersion depth: 200 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q: 280 l/min H: 2 m engine: 1,1 kW 2700 / 3200 rpm 400 V 3AC 50 / 60 Hz New ! Dimensions: 445 x 290 x 180 mm

Emulsion pump, coolant pump CET BRNO 2COA2-22 P1 Immersion depth: 220 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 30 l/ min p: 0,0,16 atü ( approx. 1.14 bar ) 0.16 kW 220 - 254/ 380 - 440 V 3AC 50 Hz used, tested ! Dimensions: 390 x 170 x 130 mm

Emulsion pump, coolant pump CET BRNO 2COA2-12 PO Immersion depth: 120 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q: 63 l/ min p: 0,,16 at ( approx. 1.14 bar ) 0.16 kW 220 - 254 / 380 - 440 V 3AC 50 Hz New ! Dimension: 290 x 165 x 130 mm

Submersible pump, coolant pump BRINKMANN TAL901/770-G immersion depth = 770 mm pump base = 200 mm pump flange = 250 mm Q = 600 l/min H = 12 m Engine: 2,2,6 KW 230 / 400 V used, tested ! 1200 x 500 x 250 mm

Submersible pump, coolant pump BRINKMANN TB 250/200-09 Immersion depth: 210 mm Pump base Ø: 140 mm pump flange Ø: 190 mm Q = 280 l/min engine: 0,63 KW 220 / 380 V Dimensions: 430 x 260 x 190 mm

Emulsion pump, coolant pump CET BRNO 2COA2-27 P0 Immersion depth: 270 mm Pump base: 100 mm Flange: 130 mm Q = 25 l/min 220 / 380 V New ! Dimensions: 440 x 130 x 170 mm

Emulsion pump, submersible pump, coolant pump CET BRNO 3COA10X-27 P1 Immersion depth: 270 mm Pump base: 140 mm Flange: 190 mm Q = 1.67 l/s Engine: 300 W 220 / 400 V New Dimensions: 450 x 190 x 200 mm

emulsion pump, submersible pump, coolant pump CET PRAHA 4AP71-2S Immersion depth: 270 mm pump base: 140 mm flange: 180 mm 220 / 400 V New ! Dimensions: 550 x 180 x 210 mm

Submersible pump, coolant pump BRINKMANN TB25/220-Z Immersion depth: 215 mm Pump base: 110mm pump flange: 130 mm Q = 30 l/min H = 2 m Engine: 0,0,10 kW 240 / 400 V IP 54 Dimensions: 350 x 190 x 140 mm unused slight color damage

Submersible pump, coolant pump BRINKMANN TC 40/430-X Immersion depth: 430 mm Pump base: Ø 90 mm pump flange: Ø 130 mm Q = 25 l/min H = 60 m Engine: 0,,85 kW 220 / 380 V Dimensions: 725 x 180 x 175 mm

Submersible pump, coolant pump, cooling water pump, BRINKMANN TE 143/420+001 Immersion depth: 420 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q = 100 l/min H = 30 m engine: 1,1,5 kW 220 / 380 V 740 x 230 x 220 mm

Submersible pump, coolant pump BRINKMANN TA 400/440-X Immersion depth: 440 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q = 380 l/min H = 2 m Engine: 0,0,85 kW 220 / 380 V Dimensions: 680 x 200 x 190 mm

Submersible pump, coolant pump, emulsion pump, BRINKMANN TA 600/360+001 Immersion depth: 360 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q = 500 l/min H = 2 m Engine: 1,1 kW 220/380 V used, tested ! Dimension: 610 x 210 x 180 mm

Submersible pump, coolant pump BRINKMANN TR 403/580-TA Immersion depth: 595 mm Pump base: Ø 140 mm pump flange: Ø 180 mm Q = 250 l/min H = 19 m Engine: 2,2,6 kW 220/380 V Dimensions: 930 x 230 x 180 mm

Submersible pump, coolant pump BRINKMANN FT35/360 Immersion depth: 360 mm Pump base: Ø 100 mm pump flange: Ø 130 mm Q = 40 l/min H = 2 m Engine: 0,,21 kW 220/380 V Dimensions: 515 x 160 x 130 mm New !