br gbr used for sale

Semi finished, just missing these price for each boat finished or we trade in the state they are.

Vertical machining center make BRIDGEPORT type Interact 412Machine -No: 73440A built in 1988Table size: 840 x 320 mmTravel X: 450 mmTravel Y: 310 mmTravel distance Z: 300 mmMax. Table load: 250 kgSpindle speed: 40 - 4000 rpm.Spindle mount: ISA 40Feed range: 0 - 4.5 / 7.5 m / min.Rapid traverse: 12 m / min.Number of tools in the changer: 12Max. Tool diameter: 75 mmMax. Tool length: 250 mmMax. Tool weight: 6.0 kgTool change time: 8,0 sec.Drive power: 5.5 / 3.7 kWWeight approx: 2,3 tOutside dimensions approx: 1910 x 1850 x 2000 mmWith- Heidenhain TNC 355 CNC control- Vice- several tool holdersused, in working order, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM.  ...

Bruderer Automatic Precision Punching Press. Type: BSTA 110H. Max. Pressure: 1100 kN (110 T). Speed range: 100 – 800 spm. Year of production: 1976. Fitted with roller-gripper feed unit BBV 320/200 on left-hand side. Max. strip width: 400 mm. Max. strip thickness: 12 mm. Max. feeding pitch: 200 mm. Adjustable stroke: 16-75. Ram height adjustment: 89 mm. Max. Tool width clearance between columns: 1170 mm. Weight of machine: cca. 26000 kg. Electrical cabinet and control. Oil pump. Oil cooler. Fitted with spring feet dampers. Front and rear safety guards with inspection glass.

Stainless steel defrost trolley BRÖKELMANN FS5130AB-GLY Specifications: 230V / 50 Hz / 3kW Content: 600 L indirect heating, regulated up to 60°C Safety shutdown at 80°C# Heating medium: Glycerin 60L glycerin filling (new) Total dimensions: H95 x W79 x D148 cm Dimensions tub: H67,5 x W73 x D133 cm mobile, with 2 pulleys & 2 fixed castors with push handle Year of construction: 2016 Function tested, device ready for use Condition see original pictures! If you have any questions, call or email.

Equipment: - Quick-change Quickmelt gluing part for hot melt adhesive. - Automatic edge magazine with roll plate and autom. Edge feeder - extended inlet ruler, adjustable - heavy pressure zone (with pgroamm adjustment) with a driven main pressure roller, as well as 3 repressure rollers - Motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control PC 16 - Modem for remote service and remote maintenance - Noise protection cladding - autom. Chain track central lubrication - Interface for return (electronic) DAHR01/02/15 Aggregate assembly - Release agent specification workpiece - Joining milling unit 2 x 2.2 kW - Cross-cut unit 2 x 0.35 kW, pneum. Adjustment chamfer/straight - Milling unit 0-25 degrees, 2 x 0.55 kW counter-rotation, to flush milling machine, pneum adjustable pneum. 2-point adjustment Vertical probe rollers - Milling unit ...

Hydr. Four-column press make FIBRO FISCHER-BRODBECK type UVOS 20-SMachine -No: 12-302-06, built in 1967Press force: 20 tRetraction force: 10 tOperating pressure: 250 barPiston diameter: 100 mmStroke: 420 mmTable and bear size: 730 x 510 mmClear dimensions between the columns: 290/500 mmInstallation height: 600 mmColumn diameter: 70 mmWeight approx: 1350 kgExternal dimensions approx: 1200 x 1150 x 2400 mmWith- Pressure display- Pressure control- Holding time setting- Zweihansausrückung- Emergency stop switchused, ready for operationPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

Technical data Working area: Width: 660 mm Height: 600 mm depth: 540 mm Width: 660 mm Height: 600 mm Voltage 50 Hz 3x: 400 Volt Overall dimensions machine: Length: 1850 mm Width: 800 mm Height: 1400 mm

Briggs & Stratton Emergency Generator 15 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 627 cm³ - - - - - Generator - Power: 14.5 / 12.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 28.3 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 79 x 58 x 76 cm - Weight: 131 kg - - - - - Price and payment - 2950,- € + 19 % VAT = 3.510,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oi ...

Briggs & Stratton Emergency Generator 20 kVA NEW - - - - - Engine - Briggs & Stratton - 2 cylinders - Air-cooled - 896 cm³ - - - - - Generator - Power: 19.5 / 17.5 kW - Voltage: 230 / 400 Volt - Frequency: 50 Hz. - 39.1 amps - - - - - Equipment - Electric start - Manual start by cable pull - Large 45 liter tank - AVR regulator (for exact compliance with the voltage) - Oil level sensor - Overload protection - Sockets: 1x 230 V, 1x 400 V (16A) - Hour display - - - - - Other data - Dimensions: 90 x 58 x 89 cm - Weight: 160 kg - - - - - Price and payment - 3650,- € + 19 % VAT = 4343,50 € - Payment: Prepayment - A proper invoice with VAT will be created - - - - - Accessories (can be ordered optionally) - Wheelset with push rods - Flexible exhaust hose 2.5 mtr. - Maintenance kit for the first maintenance (consisting of engine oil ...

SHORT PASTA LINE 500 KG/HOUR Continuous automatic line for the production of short-cut pasta, used but in good condition. Production capacity +/- 500 Kg./h.  Consisting of : -N. 1 Press Mod. Braibanti type Mabra 3R complete with accessories excluding dies for the various formats - N. 1 Trabatto with 5/7 passages with internal/external stainless steel panelling - N. 1 Pre-Dryer type Teless with food-grade polyester belts on 9 levels x Mt. 6.20 long x H Mt.4 - N. 1 Dryer type Teless with food grade polyester belts on 9 levels x Mt. 10,20 long x H Mt.4 - #1 Final cooler - Elevator belts connecting the various equipment. The dry pasta storage and packaging silos are excluded. In case of interest, we could arrange to find the necessary equipment to complete the plant.

Technical data: CNC Heidenhain 530 TABLE: Table dimensions: mm 1.600 x 1.250 Table rotation: continuous Capacity: kg 6.000 WORKING CAPACITY: Longitudinal travel/X-axis: mm 3.000 Transverse stroke/Y axis: mm 1.250 Vertical travel/Z axis: mm 1.600 Luge stroke/W axis: mm 650 MANDREL: Spindle connection: ISO 50 Barrel diameter: mm 130 Rotation speed: 2,000 rpm Motor power: kW 22 TOOL MAGAZINE: Tool stations: Nr. 60 GENERAL: Overall dimensions: mm 7.700 x 5.500 x 4.600 Machine weight: kg 33.000 Machine complete with: High pressure through the spindle Blowing air through the spindle Remote electronic handwheel Heidenhain optical lines Instruction manuals NB: The aforementioned technical data, collected from the technical data sheet of the manufacturer, are to be considered non-binding and subject to change without notice.

Table length: 1065 mm Table width: 230 mm Longitudinal X: 760 mm Cross Y: 305 mm Vertical Z: 405 mm SPECIFICATIONS X - Travel  760 mm Y - Travel  305 mm Z - Travel  405 mm bed / plano / portal / moving column Uniniversal milling Controll  Conventionel with Positip 850 Table Length x Width  1065 x 230 mm Table load in kG  200 Kg Spindle Taper  R8 with collet Spindle speeds / ranges  4600 Rpm  

60” x 22” Two Roll Mill Manuf.: Bridge UK With variable speed control Siemens S7 - 1200 Safety PLC. Danfoss 90kW 315 Amp Frequency Drive with Dynamic Braking Resistor Electromotor 90kW 980rpm Front Roll Speed max. speed (50Hz) 14.1rpm Manually adjustable guide plates Manual nip adjustment Failsafe Pneumatic Caliper brake for Emergency Stopping of Mill Flood cooled rolls with rotary unions fitted 8 outlet mechanical lubrication system to roll bearings David Brown gear box – ratio 980:65.1 High speed pinion / bull wheel drive to rolls Safety PLC control for Start up sequence and machine monitoring HMI fitted to main panel for status monitoring of machine Operation Controls – Rolls Stop / Rolls Start / Inch Reversetart / Inch

Table length: 1120 mm Table width: 510 mm Longitudinal X: 1020 mm Cross Y: 510 mm Vertical Z: 510 mm Positions ATC: 20   Positions APC: 0   CNC Brand: Siemens CNC Model: 810 D Make  Bridgeport HARDINGE Type VMC 1000 P3 Year 2005 Siemens 810D SHOPMILL bridgeport hardinge Table length (mm) L = 1.120 Table width (mm) W = 510 Longitudinal X (mm) X = 1.020 Cross Y (mm) Y = 510 Vertical Z (mm) Z = 510 Iso40/ 13kW/ 8000 Rpm ATC 20 positions Very little hours !  

Watson-Marlow Bredel SPX25 Hose Pump Condition: Unused Shipping weight: 120 kg Dimensions: 100x75x65cm WxLxH Bredel high-performance hose pumps handle abrasive sludge, paste-like materials and slurry with 100% volumetric accuracy. Unlike diaphragm, lobe, and progressive cavity pumps, moving parts do not come into contact with the product and there are no mechanical seals in the pumps. The pumped liquid is entirely contained within a long-lasting hose, preventing the user from coming into contact with chemicals, sludges, and slurries. Each Bredel hose is precision machined to ensure flow stability and pump performance in demanding fluid handling applications.

Warehouse number: 3651 Pump Manufacturer: BREDEL , Type: B 25 Year of construction: NEW Specifications: Capacities 1.8 / 2.88 -m3/h druch 1600 kpa Weight: 100 kg

BRAVO ICE CREAM MACHINE CONDITION : GOOD Contact us for more information.

Arm length: 2200 mm Drilling capacity steel: Ø 50 mm Spindle Mounting: MK5 Spindle speeds: 30 - 2200 rpm. Spindle -> slab: 1620 mm (max) Clamping sleeve LxWxH: 480 x 820 x 550 mm Surface floor slab: 1700 x 800 mm Motor power: 6 kW Country of origin: Italy Machine LxWxH: 2760 x 1000 x 2960 mm Machine Weight: 6000 kg

Clamping bracket 500 x 460 x 1450 mm

Clamping bracket 500 x 460 x 1450 mm

Clamping bracket 1000 x 1200 x 1800 mm

Clamping bracket 1000 x 1200 x 1800 mm

Panel thickness: 8 - 50 mm Thickness of the edges: 0,4- 3 mm Feed speed 8 - 11 m / min PU pressure rollers Equipment: Non-stick spray system Squaring unit, 2 motors 2,2 kW Panel edge heating Edge magazine for coil and strips Hot melt application with roller Airtec AT4510 unit The Airtec aggregate is positioned so you can use Airtec or the standard glue pot Motorized side pressure unit End trims, 2 motors, pneumatic positioning straight and with chamfer trimming unit above / below Contour trimming unit Profile scraping unit Glue scraping unit Polishing unit Detergent spray system central lubrication Powertouch control

Stock# U2403-1 Used stainless steel homogenizing mixer by Brogtec (CH) model MH-8. Mixer has total volume of mixing chamber 10 l and working volume about 8 l. Tank is rising and lowering manually. Has bottom discharge outlet and possibility to discharge by manual tilt. Working pressure range - mixing chamber from vacuum till 29 PSI (2 bar). Heating jacket up to 43 PSI (3 bar). Working temperature range - mixing chamber from 32 - 250 F (-1 to 120 C). Heating jacket - from 89 - 250 F (31 - 120 C). Mixer is equipped with anchor with wall scrappers type agitator, vertical ribbon agitator and hi-speed homogenizing mill. Anchor and ribbon agitators are driven by gearbox and el motor 0.3/0.44 kW, 1660/3260 rpm, 460 V, 60 hz. Working rotation of vertical ribbon agitator is about 124 rpm, working rotation of anchor agitator - up to 62 rpm. Hi-speed homogenizing mill is belt driven by el motor  ...

Equipment: - Quickmelt gluing part for hot melt adhesive - Automatic edge magazine for rolls and fixed lengths - Heavy pressure zone with driven, pneumatically applied main pressure roller and 2 free-running repressure rollers. (adjustable by program) - motor-adjustable upper pressure. - Control panel on the machine inlet. - Electronic control power control PC 20+ - Feed variable 8-14 m/min - PU overpressure rollers - Inlet ruler adjustable by program - Joining milling unit 2 x 2.2 kW - Bevel cross-cut unit/straight 2 x 0.18 kW - Milling unit 2x0.55 kW (adjustable by program) with multiple roller pressing - Mould milling unit top+bottom, 2 x 0.35 kW - Drawing blade with quick-change heads and additional device for pointed workpieces - Glue joint drawing blade - Schwabbelaggregat - Automation package for 1-milling machines, consisting of: 3175 - Pneumatic Adjustment Caps ...

Cut to length line Bronx CTL 1-5mm 400-1500 15 MT Material: CR, HR, P&O GALVA Thick (mm): 1,0 – 5.0 Width (mm): 400 – 1500 Weight max: 20 MT Coil Int. Diam.: 508/610/700 Coil Ext. Diam max (mm): 2000 Length Produced (mm): 500 – 4000

IRCO Profimat 65.6/196.6

Text suggestion BRZINA REZANJA = Croatian = cutting speed Hydr. Hacksaw BRZINA REZANJA (Made in Croatia) Type BS 320 Year of construction approx. 1980 Sawing area Round 320 mm Sawing area Square 280 x 280 mm Saw blade 550 x 45 x 2.25 mm Material inlet height 680 mm Sawing speed 42 - 55 - 85 - 110 strokes/min. Motor power 1.8 and 2.4 kW Pole switchable Mains connection 400 volts, Hz - Mitre adjustment up to 45 - Saw motor with 2 speeds and 2 V-belt stages - Hydraulic saw bracket lowering - Hydraulic cutting pressure adjustment via throttle valve - Coolant device in the machine foot Space requirement Hacksaw L x W x H 1900 x 1350 x 1500 mm Width without stop 800 mm Weight approx. 750 kg good condition; used

Submersible slurp pump with motor Brinkmann

Submersible pump with motor

4-column press make FIBRO FISCHER - BRODBECK type UVOS 63Machine -No: 12-306-08, built in 1964Press force: 63.6 tRetraction force: 33 tOperating pressure: 250 AtuTable surface: 500 x 750 mmClear dimensions between the columns: 260/530 mmStroke: 350 mmInstallation height: 600 mmOutside dimensions approx: 1400 x 750 x 3000 mmused, in good conditionPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors excepted.We would be pleased, if you like our offer and are always available for your queries.Best regardsM. WaldeckWAHO Machine Tools

BRAIBANTI production line for pasta "Long cut" Refurbished 2023, complete control NEW Output: 3000 kg/hour Equipment: Press Pre-Dryer Divider Dryer Cool Humidifier Cutting Unit Feeding elevator for packing section Electric Control System and control panel with all inside cabling of system Dry Pasta Storage section- -8 hours capacity Vacuum Pumping system (NEW) Raw material feeding system (Rotoflow) with air transfer (Blower) (NEW) Hot water system with piping between line (NEW) Chiller system for cold water (NEW) The washing machine (NEW) Pasta die and filters (with new inserts) 2 x Packaging system (110 packs/minute) (NEW) Laboratory (Pasta grinder and Pasta moisture analyzer) (NEW) Compressed air system (NEW) Water filtering and softening system (NEW) Needed minimum building dimension: Length 4800 cm x Width 800 cm x Height 800 cm. Shall have changes according ...

Type: Microcutter Brundeler Holeplate diameter 175 mm Capacity: up to 2500kg/h Hopper capacity: 150 liter Machine dimensions in сm: Length: 170 Width: 80 Height: 105 Power: 37 kW Delivery time: 20 working days after payment

for pressing PET bottles

LONG PASTA LINE 350 KG./ HOUR - Continuous automatic line for the production of used and totally overhauled as new Long Pasta. Production capacity +/- 350 Kg./h. reference to spaghetti with a diameter of 1.7mm. Consisting of: N. 1 Press Mod. Braibanti type Mabra 1R N. 1 Spreader for rods from Mt. 1,64 Mod. Stedo UNI 164 N. 1 VAT type registration from Mt.8 N. 1 Dryer Mod.Braibanti type LPG 4PV + 1R Storage silos with 6 floors of 11Mt. IPAC type automatic extractor Packaging Line. The line was tested then the pasta factory closed so the electrical and plumbing systems are new and recoverable.

2 pieces of brake plates LA322482200, suitable for Fendt / Massey Ferguson / Laverda

FU AllenBradley expanded from functioning plant

Edge banding machine with joint/form milling machines Brandt Highflex 1220 FC YOC 2015 Workpiece thickness 8 - 60 mm Edge thickness 0.4 - 3.0 mm Feed speed 10 m/min Joining Milling – DIA Tools Gluing unit Contact heating shoe Pressure zone Pneumatic Package Cross-cut unit Flush milling unit Profile drawing blade unit Schwabbelaggregat Electronics control Machine length 4200 mm Machine dimensions W x H 1300 x 2180 mm Weight 1400 kg

Edge banding machine Brandt Optimat KDF 1600 GC YOC 2009 Edge thickness 0.4 - 12 mm Plate thickness 8 - 60 mm Feed 12 m/min Inlet ruler adjustable Pneumatic package Automation package Quickmelt Premelting Unit Joining milling unit 2 x 2.2 kW Cross-cut unit chamfer / Straight 2 x 0.35 kW Milling unit 2 x 0.55 kW Mould milling unit 2 x 0.35 kW (2 units) Drawing blade unit with quick-change heads Surface drawing blade for glue joint Schwabbelaggregat 2 x 0,18 kW Electronics control Connection value 11.5 kW Machine length approx. 6600 mm Weight 2900 kg

aschinella details Warehouse number 1105-03656 Machine Type Machining Center - Vertical Make BROTHER Type TC 211 Year of construction 1987 Control type CNC Storage location HAGUENAU Country of origin Japan Delivery time immediately Freight base freely loaded from stock Price Technical details x-travel 420 mm y-travel 220 mm z-travel 200 mm Spindle cone 30 NT Speed range 1-4000 rpm Spindle motor 3.5 kW Table clamping surface 600 x 300 mm Number of tools in the magazine 10 pieces Rapid traverse 20 / 15 m/min Information WELL PRESERVED MACHINE

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Equipment: - Machine stand throughout - Fixed stop side right - Paint finish Grey RDS 240 80 05 - Inlet ruler motorically adjustable, extended by 300 mm - Inlet lock pneumatically controlled - automatic edge feeder - Upper pressure: belt upper pressure - Height adjustment motorized - Position display and input centrally via the controller - Transport chain with rubber support, 80 mm wide - automatic central lubrication for the transport chain - Workpiece support in scissor design, approx. 1000 mm extendable - Noise protection equipment - Hood interior lighting 3 lamps - Control Power Control PC20+ Aggregate technology: - Joining milling unit 2 x 2.2 kW 200 Hz (60 mm joining milling cutter set) - Gluing unit A15 (workpiece preheating, QA34 application unit, infrared adhesive activation, magazine for rolls and fixed lengths, pressure zone with motorized adjustment, driv ...

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Max Diameter 485mm Min length 1500mm, Max length 5500mm Drive power from the rotor disc 315kw Feeding step separator, feed belt, metal detector Removal Bruks 2x screws 1x 600x6.500mm and 1x 800x9.500mm Wood chip length 25mm Cabinets Year of construction/commissioning 2004 Working hours approx. 12500 hours Capacity 80-100 Qm3/h

Brodpol pallet board production line We present a complete line for the production of pallet boards from the Polish manufacturer BRODPOL A line of fully automatic disc sawmills installed and perfected for production. The rope is installed higher, while the entire conveyor belt infrastructure transfers the material between the individual operations, and the waste goes to the chipper. The line consists of Cross feeder with cascade for feeding round wood 4 m Longitudinal feeder before fitting Brodpol TT 5/600/400G fitting. Installed power 166.1kw 3.1. The flis falls into the transport towards the chipper 3.2. The side planks fall on the cross conveyors and are transferred to the off-cutting machine 3.3. The pile is transferred to the centering table in front of the multi-rip saw. 4.WP-165 Double Spindle Multi Rip Saw Installed Mac 132.2kw Cross conveyors dump ...

Capacity 25 mm Details for blocks & pamphlets