british flag
Resale Logo

box used machine for sale on RESALE.INFO
all categories

back back
 banner advertisement information auctioneer  Karner & Dechow Industrie-Auktionen Ges.m.b.H.  http://www.karner-dechow.at 
banner logo
start page > keywords box > results
maximum number of results exceeded > 1000
please refine your search
1000 items ordered by
post used machinery     
No. Cat. Photo Manufacturer | Model
Type of machinery
Year Price Country Contact
1 2 3 4 5 <  page 6  > 7 8 9 10 11 12 13 14 15 16 17 18
121116383 505

SIERRA IDROMEC 500T SLK for sale
A.) Scrap shears


Make : SIERRA Model : T506 SLK Type of shear: Mobile shear Year : 2009 Cutting force (t): 500T Box open (mm): 6.000 x 2.260 Box Closed (mm): 6.000 x 800 x 650 Blade Size (mm): 880 Hold down force (t): 70 Pre c ...
used machine
 

Make : SIERRA
Model : T506 SLK
Type of shear: Mobile shear
Year : 2009
Cutting force (t): 500T
Box open (mm): 6.000 x 2.260
Box Closed (mm): 6.000 x 800 x 650
Blade Size (mm): 880
Hold down force (t): 70
Pre compression 1 (t): 210
Pre compression 2 (t): 210
Pusher force (t): 150
Drive: Diesel
Main power (kW): 135
Capacity (t/h): 8 - 14

Extra information:
Incl. cabin
Incl. remote control
Incl. spare parts
Recently fully refurbished
2009
185,000 €  
    request
121116381 707

WINTERHALTER GS 72 for sale
Sinks


Here we sell a well-kept Winterhalter hood dishwasher. Type: GS 72 To purchase you will receive an invoice with VAT! Ideal for rinsing of E2 boxes, pots, buckets, plates etc. It was serviced regularly by Winter ...
used machine
 
Here we sell a well-kept Winterhalter hood dishwasher.
Type: GS 72

To purchase you will receive an invoice with VAT!

Ideal for rinsing of E2 boxes, pots, buckets, plates etc.

It was serviced regularly by Winterhalter and was now completely overhauled, therefore it is in a technically perfect condition.

Including rinse,- and detergent dispensing device

Matching inlet- and discharge tables are also available with us.

Width: approx. 70cm depth: 80cm height: 150cm.

Technical data:

Control switch-off

Washing programs:

Short program about 1.5 min

Standard program CA 3 min

Programme of duration of

Rinsing basket dimension: 50 x 50 cm voltage: 380/400V (9,7KW)

Will receive an invoice with expelled VAT!
2001
1,800 €  
    request
121116377 707

HOBART FTN for sale
Box washers


Here we sell a well-kept Hobart FTN band dishwashing. It is in good condition, has been serviced regularly by Hobart. Recently, the engine was overhauled again, while both wash pumps were renewed, as well as some hea ...
used machine
 
Here we sell a well-kept Hobart FTN band dishwashing.

It is in good condition, has been serviced regularly by Hobart. Recently, the engine was overhauled again, while both wash pumps were renewed, as well as some heaters and hoses, also are also the rinse pump new. On these parts get guarantee from us half a year!

The dishwasher has been cleaned yet and can be delivered in one piece by truck, so you must be connected to you only on electricity and water.

Band width 60 cm

Shelf height: 50 cm with drying

Including rinse,- and detergent dispensing device total length: 560 cm direction: right to left
Technical data:

Voltage: 380/400V 47,84KW

Will receive an invoice with expelled VAT!
2002
8,500 €  
    request
121111989 1300

LOEDIGE FKM 2000 D / 3 MZ for sale
Ploughshare Mixer 2.000 l.


Horizontal mixer with 2.000 l. gross capacity, incl. drive unit with 37 kW motor, Flender gearbox SZN 160 and Fludex clutch, incl. 2 choppers (upgrade to 3 choppers is possible). Main shaft is equipped with Becker shovel ...

 
Horizontal mixer with 2.000 l. gross capacity, incl. drive unit with 37 kW motor, Flender gearbox SZN 160 and Fludex clutch, incl. 2 choppers (upgrade to 3 choppers is possible). Main shaft is equipped with Becker shovels, discharge gate pneumatically operated. In very good condition, refurbished in 2017.

Available for an additional charge: Suitable weighing and dosing installation by AZO.
 
Price  
  DE   request
121098298 402

GENIUS GE- 22 for sale


Maschinentyp Ausgekleidete Kartonverpackungsmaschine (Modell: GE-22) Verpackungsbereich 250gm & 500gm. Geschwindigkeit Für 250gm: Ca. 30 bis 35 Kartons / Min. Für 500gm: Ca. 20 bis 25 Kartons / Min. Genauigkeit  ...

 
Maschinentyp
Ausgekleidete Kartonverpackungsmaschine (Modell: GE-22)
Verpackungsbereich
250gm & 500gm.
Geschwindigkeit
Für 250gm: Ca. 30 bis 35 Kartons / Min.
Für 500gm: Ca. 20 bis 25 Kartons / Min.
Genauigkeit
+/- 0,5% bis 0,8%.
Befüllvorrichtung
Mehrkopfwaage (Multi wiegen).
Frequenzumrichter
3 KW (Delta Make).
Stromversorgung
Standard 440 / 220Volt, dreiphasig, 50 Hz.
Erforderliche Leistung
9 KW
Gewicht
Nettogewicht 2200kg.
Cam Indexer
Camfield machen.
PID-Temperaturregelung
Omron machen.
Alle Kontaktteile & Füller
SS 304 machen. (Rostbeweis).
Alle elektrischen Motoren
Bonvario machen.
Drähte und Kabel
Fenolex machen.
Kette
Rollon machen
Frequenzumrichter
Schneider machen
Drucktaster und Wahlschalter
Teknic machen.
Vakuumpumpe
Dicon machen.
Prägeeinheit
Ja.
Klebeeinheit
Kaltkleber.


MASCHINENBAU:
v FABRICATED / CASTING (Prägeeinheit, Förderband, Falzeinheiten).
v Abmessungen: Ca. 12 Fuß x 6 Fuß. In Förderband - 2 Fuß (Ca. 300 Boxen können gleichzeitig gestapelt werden).
v Vakuumpumpen - 1 KW Motor x 1 Nr.
v Motoren. [Hauptantrieb - 1 Motor (3 PS, 3-phasig), Vakuumpumpenmotoren - 1 Nr. (1 PS, 3-phasig), Vibrationsmotor - 1 Nr. (3 PS, 3-phasig), Ausgangsfördermotor - 1 Nr. (1 PS, 3 Phasen).
 
5,100 €  
  DE   request
121093023 101

AEG DTBK 15 for sale
Box Column Drill


Drilling depth: 100mm, drilling diameter: 15mm, rotational speed: 350-1400/min, length: 700mm, width: 340mm, height: 110mm, weight: 150kg.
used machine
 
Drilling depth: 100mm, drilling diameter: 15mm, rotational speed: 350-1400/min, length: 700mm, width: 340mm, height: 110mm, weight: 150kg.
 
Price  
  DE   request
121093014 101

GILLARDON GSB 20 for sale
Box Column Drill


Drilling diameter steel: 20mm, swing: 260mm, drill stroke: 115mm, weight: 400kg, number of machines: 2, including water pump and container.
used machine
 
Drilling diameter steel: 20mm, swing: 260mm, drill stroke: 115mm, weight: 400kg, number of machines: 2, including water pump and container.
1975
Price  
  DE   request
121093010 101

AEG TBK 10 for sale
Box Column Drill


Quick action drill chuck: 0-10mm, rotational speed: 700-2040/min, voltage: 380V, power: 250W, weight: 300kg.
used machine
 
Quick action drill chuck: 0-10mm, rotational speed: 700-2040/min, voltage: 380V, power: 250W, weight: 300kg.
1970
Price  
  DE   request
121080705 1401

double for sale
shelve


â?¢ Barrel length: 136 m â?¢ Height: 2.21 m â?¢ upper edge of chipboard flooring: 2.25 m â?¢ Frame depth: approx. 0.65 m â?¢ Frame: partially closed, partially op ...

 
â?¢ Barrel length: 136 m
â?¢ Height: 2.21 m â?¢ upper edge of chipboard flooring: 2.25 m
â?¢ Frame depth: approx. 0.65 m
â?¢ Frame: partially closed, partially open â?¢ floor load: CA. 130 kg â?¢ 4 pair of beams or 2 pair of beams
â?¢ Load passageways: approx. 250 kg / m2
â?¢ Execution: galvanized stair width: 0,80 m
â?¢ 11 stairs â?¢ partially above rear wall grille
â?¢ Shelves: approx. 0.60 m x 1.00 m or
approx. 0.60 m x 0,915 m â?¢ space requirement of the plant: approx. 10 x 10 m
29 fields with 915 he floors: length: approx. 26,53 m
29 fields with 1000 he floors: length: 29.00 m
21 fields with 915 he floors: length: 19.21 m
29 fields with 1000 he floors: length: 29.00 m

â?¢ Space requirement of the plant: approx. 10 x 10 m
29 fields with 915 he floors: length: approx. 26,53 m
6 fields with 915 he floors: length: 5.49 m

â?¢ Each box about 5 shelves
 
5,500 €  
    request
121080595 109

MAHO HANSEN HS300W for sale
EDM Machines


Control HEIDENHAIN Erocom 20, 45 amp generator, EROWA clamping system, 16 fold electrode changer, C-box for tungsten carbide traverse paths X 300 mm, Y approx. 190 mm, Z 286 mm, manual
used machine
 
Control HEIDENHAIN Erocom 20, 45 amp generator, EROWA clamping system, 16 fold electrode changer, C-box for tungsten carbide traverse paths X 300 mm, Y approx. 190 mm, Z 286 mm, manual
1992
Price  
    request
121080523 1403

HALTEC Storage Warehouse Hall for sale
Portal Framed Steel Building


Prefab steel Hall which is to be dismantled soon. This steel framed building has so far been used as Assembly Hall and Warehouse. Possible future use: industrial building, warehouse, production hall, workshop and much mo ...
used machine
 
Prefab steel Hall which is to be dismantled soon. This steel framed building has so far been used as Assembly Hall and Warehouse. Possible future use: industrial building, warehouse, production hall, workshop and much more.

DESCRIPTION:
Pre-Engineered, Pre-Fabricated Warehouse Steel Building Kit, covering approx. 487 square meters, measuring 40m (Length) x 12.7m (Width) x 5m (Eaves) x 7m (Apex). The structural framework consists of hot rolled European standard I- sections, Columns are IPE 400, Roof Trusses are IPE 400, so definitely a durable structural design for the long haul.

The roof cladding consists box profiled steel sheets fixed onto galvanized Z-profile purlins. The wall cladding consists of single skin trapezoidal steel sheets.

APPROXIMATE DIMENSIONS:
Floor area: approx. 487 square meters;
Width of the Hall: 12.70 meters, outer wall panel;
Hall length: 40.00 meters, outer wall panel;
Longitudinal grid: approx. 5.00 m, bay width;
Clear height: approx. 4.60 m, below the roof trusses;
Eave height: approx. 5.00 m, lower edge of the roof panels;
Ridge hight: approx. 7.00 m, lower edge of the roof;
Snow load: approx. 0.75 kN/sqm / 75 kg / m2;
Wind load: approx. 0.50 kN/m2;

ROOFING: steel trapezoidal sheet and translucent panels.
Wall / FACADE: trapezoidal sheet steel.
FACILITIES: 2x sectional shutter doors; 1 pedestrian steel doors;
LOCATION: North Rhine-Westphalia. Visit by appointment.
AVAILABILITY: to be agreed upon.

What you get is a durable metal building, requiring at the very least two 30 ft trailers to collect. Superb, rigid frame, excellent for workshop, warehouse shed.

PRICE: against bid with full company contact details of prospective buyer. Want to make me a reasonable offer? Could be flexible on price! For further details or any queries please send your eMail.
1999
Price  
    request
121061703 703

Ribbon mixer


capacity 15.000 L. all stainless steel Double Ribbon mixing arm 2 x 1,5 kW motor redactors Total dimensions ( l x w x h) : ± 4.000 x 3.500 x 3.900 mm new control box bottom discharge with screw + elevating spira ...

 
capacity 15.000 L.
all stainless steel
Double Ribbon mixing arm
2 x 1,5 kW motor redactors
Total dimensions ( l x w x h) : ± 4.000 x 3.500 x 3.900 mm
new control box
bottom discharge with screw
+ elevating spiral screw pitch 200 mm, diameter 400 mm, 1,5 kW
+ discharge screw pitch 150 mm, diameter 300 mm, 1,5 kW

+

Tank ± 700L
Dimensions ( l x w x h) : ± 1.200 x 2.000 x 2.000 mm

+

Water Tank ± 4.000L
Dimensions ( l x w x h) : ± 2.400 x 2.000 x 2.300 mm
 
Price  
  BE   request
121039671 702

FRIEDRICH E 5 1,2/8 for sale
Multideck ovens


5 floors each 120 x 40 cm with proofing Cabinet with hood Oven with digital control Proofer control manual Oven is movable on wheels with fixed water connection (for steaming) Floors flaps are made of glass (visib ...
used machine
 
5 floors each 120 x 40 cm
with proofing Cabinet
with hood
Oven with digital control
Proofer control manual
Oven is movable on wheels
with fixed water connection (for steaming)
Floors flaps are made of glass (visible)
Each floor is with lighting
Each floor separately controllable
Top and bottom separately adjustable
1 baking Chamber has 4,8 kW therefore the oven has total 24 kW (plus 2.6 kW provers)
Baking Chambers are on 400V / 3PH / N / PE
Each floor has an its own steam box
Oven Proofer is completely clad in stainless steel is kW 230 / 1PH / N 7 PE 2.6 12 A
Year of manufacture 2010
Oven is in very good condition
External dimensions: Width 155cm depth: 95cm height: 212cm
Etagenmasse inside: depth: 40 width: 120cm
2010
Price  
    request
121039345 1101

MAN 2 motori diesel Man D2842 LE21 for sale


Trigeneratore: machinery on show in Turin main components: -soundproof container with 2 baffles -2 12-cylinder diesel engines, 420, 211 Man D2842 Kwe continues, 1,500 rpm with 2 l/40 680 KvA alternator Meccalte Eco 4 ( ...

 
Trigeneratore: machinery on show in Turin main components:
-soundproof container with 2 baffles
-2 12-cylinder diesel engines, 420, 211 Man D2842 Kwe continues, 1,500 rpm with 2 l/40 680 KvA alternator Meccalte Eco 4 (three-phase 400 V, 50 Hz)
-2 twin mufflers
-2 daily vegetable oil and diesel fuel tanks
-2 heat recovery systems and dissipation
-2 double room underground tanks for vegetable oil (25 mc/cad) with heating and leak detection
-1 double room underground tank for diesel fuel (5mc/cad)
-2 groups switchboards with power, control, protection and measurement section
auxiliary power supplies and electric containment box-Quad.
-1 water/lithium bromide cycle absorber with containment box
-cooling tower water treatment system with (Legionnaires ' disease)
-5000 L capacity storage Jar (thermal flywheel)
For sale exclusively on day 29 November 2017 in Bergamo for more details and expertise, please contact us: 0307751645

 
37,500 €  
  IT   request
121028628 108

FANUC ARCMATE 100IB RJ3iC for sale
Industrial robot


ARCMATE 100IB RJ3iC robot robot 6 axis control system: RJ3Ic capacity: 6 kg range: 1337 mm repeat accuracy of 0.08 mm machine dimensions: 1300 x 790 x 600 mm equipment: cable length to the robot 14 m box with 10 m cable  ...
used machine
 
ARCMATE 100IB RJ3iC robot robot 6 axis control system: RJ3Ic capacity: 6 kg range: 1337 mm repeat accuracy of 0.08 mm machine dimensions: 1300 x 790 x 600 mm equipment: cable length to the robot 14 m box with 10 m cable and screen 32-bit process ssor 32 MB of system memory 32 MB RAM 3 serial interfaces for PC link PCMCIA and USB connector 2 x 100 MBit interface and integrated Web Server digital in - and outputs 6 / 2 supply voltage 400 V / 50 Hz / fuse 16 A 1 piece welding unit FL EX 4000 1 piece sensor. CAT type 1 piece robot writer type ROBO 455 2 piece welding table 1 piece Thielmann cleaning station.
2007
Price  
    request
121028597 901  

DEUTZ-FAHR AT M 650 PL DCR for sale
Agricultural tractors


135 kW, overhauled engine, 50 hours, reconditioned gearboxes, hydraulic block damage: demolished mount tyres: front 540/65/34 20% profile, rear 650/65/42 35% profile; Front linkage,
used machine
 
135 kW, overhauled engine, 50 hours, reconditioned gearboxes, hydraulic block damage: demolished mount tyres: front 540/65/34 20% profile, rear 650/65/42 35% profile; Front linkage,
2008
35,000 €  
    request
121000387 103

INGERSOLL 120 x 144 x 24 ft for sale
Horizontal Floor Type Milling And Boring Machines


120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210 This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and ...

 
120" x 144" x 24ft Ingersoll 100 hp Single Spindle Openside Milling Machine – Re:24210

This machine consists of a bed and table and a main housing carrying a single spindle motor-driven head having vertical feed and traverse movement.

The bed has a finished pad on the left-hand side so that a bedwing and outboard support can be added to the machine when required.

Capacity:
Vertical distance from table to centerline of spindle 0-144"
Length of table feed and traverse 24'
Length of quill travel from face of head 0-24"

Bed (3 ways):
Width across travel ways 112"
Overall length, approx. 52.5'

Table:
Working surface width 120"
Working surface length 24'
Overall length 26'
• Power operated lock
• Johnson Drive
• T-slots & Pin holes

Housing:
Width across housing ways 90"

Head:
• Movement on housing is made through two (2) elevating screws.
• Hand-operated locks
• Contains a quill which carries the spindle
• Spindle is driven by a 100 HP adjustable speed drive DC motor through gearing
• Flywheel on spindle drive

Spindle:
• The spindle is equipped with a No. 450 taper, 4-1/2" in diameter at the large end, ¾" diameter taper per foot

Quill:
Spindle quill diameter 22"
Power and hand adjustment 24"
• Power adjustment is independent of table and head movement
• Hand operated lock

Spindle Speeds:
Spindle speed, approx. 10-130 RPM
• The spindle has three (3) ranges of speed. Medium starts at 14 RPM, and high-speed range is full capacity of the 100 hp drive motor.

Feed Distribution:
• The machine is arranged with two (2) 2-Motor feed boxes, one for the head feed and one for the table

Feed & Traverse Rates:
Feed Rapid Traverse
Table ¾" – 36" per minute 20 ft. per min
Head ¼" – 12" per minute 8 ft. per min
• Quill is equipped with an electronic feed motor providing feed and traverse movements ranging from ¾" – 24" a minute

Full Lubrication for all areas:

Motors and Electrical Equipment:
Qty. Description
1 Main Motor 100 hp, 575/1725 RPM, 230 volts, DC, drive motor
2 Feed Motor 7-1/2 hp, 575/2300 RPM, DC
2 Head & Table Drive Motors 40 hp, AC, foot mounted traverse motors
2 Lubricating Pump Motors ½ hp, AC,
1 Quill Adjust Motor 3 hp, 1150/2300 RPM, DC, 65/2300 FPM
1 Coolant Pump Motor 2 hp
1 Table Clamp Motor 15 ft. lb., 1800 RPM, Shell type

Electrics:
• 230 volts, DC
• 440 volts, AC
• The DC motors receive DC power from a 900 kW MG Set driven by a 150 hp motor

Machine controls:
• The machine is primarily controlled via a portable pendant with the following :
1. Start and stop drive motor
2. Start, stop, reverse, jog, feed, fast feed and traverse table
3. Clamp table
4. Start, stop, reverse, jog, feed, fast feed and traverse bed
• The control cabinet mounted on the operators platform contains the following:
-Hand operated rheostats for increasing or decreasing the feed rates
-Stop and start buttons for chip conveyor, coolant pump motor and lube pump motor.

Coolant

Chip Conveyor

Net weight - 330,000 lbs


(2) Hydraulic Clamping Fixtures:
• Fixtures consists of two complete clamping units, each unit including a housing, clamping rail and supporting brackets.
• Adjustable Clamping Rail – to clamp various die block widths
• Housing is located on the table in one of two positions; one for blocks from 14" to 27" thick, and a second for blocks 27" to 40" thick
• Each fixture is equipped with pendant operated through push buttons and selector switches
Capacity – the fixture is adjustable for holding the following sizes of die blocks:
-Thickness – 14" – 40"
-Width – 36" – 90"
-Length – 58" – 21-1/2 ft.
-Electrics – 440 volt, 3 phase, 60 cycle, AC as follows:
-(1) 7-1/2" HP AC motor for adjusting crossrail
-(1) 5 HP AC motor for driving the hydraulic pump motor
-Weight – estimated weight of each fixture and its parts is 140,000 lbs
-Magnetic Clamping on each fixture as follows:
-Fixture 1 – Sundstrand magnetic Control, 480 v AC - 244 DC
-Fixture 2 – Neutrofier II Magnetic Control, 280/400 AC – 244 DC
-72" x 10" Magnetic face on each fixture
-Travel:
-Vertical travel – 64"
-Hydraulic Unit:
-Vickers

Note:
Maximum recommended weight on table is 740,000 lbs. If one fixture is used then reduce by 140,000 lbs. If two fixtures are used then reduce by 280,000 lbs.

The machine was originally designed to perform general face milling operations on die blocks.

It is currently installed under power at a NorthEast USA plant where it may be inspected on request.

We will sell the Clamping Units separately.
 
Price  
  US   request
120987190 107

TILGERT SS-4-6,5-G for sale
SCRAP CUTTER


SCRAP CUTTER material width 150 - 650 mm material thickness 0,10 - 1,50 mm power 24,5 kW cutting speed max. 200 m / min. tensile strength max. 690 N / mm2 material cold rolled steel scrap strip width max. 3 -  ...
used machine
 
SCRAP CUTTER

material width 150 - 650 mm
material thickness 0,10 - 1,50 mm
power 24,5 kW
cutting speed max. 200 m / min.
tensile strength max. 690 N / mm2

material cold rolled steel
scrap strip width max. 3 - 30 mm
no. - cutting heads 4 (2 x 2 pc.)
ctting head - ø 140 mm
cutting head width 130 mm
no. - blades 3 / each cutting head
inclination of blades 15°
infeed speed 16 m / min.

accessories:
no. - cutting units 2, with mounted feed hopper (2 x 2 pc.)
no. - cutting heads 4 (2 x 2 pc.)
adjustment - cutting heads motor driven (by spindle)
no. - adjustable motors 2
upper motor - adjustment cutting head left side
lower Motor - adjustment cutting head right side
data of motors (2 pc.) manufacturer Getriebebau NORD, power each 0,55 kW

cutting units movable on base frame (Motor driven)
Adjustment width 150-750 mm

no. - feed hopper (for strip) 4 (2 x 2 pc.)
dimension - feed hopper I (w x h) 52 x 55 mm
Dimension - feed hopper II (w x h) 47 x 55 mm

main Motor manufacturer SIEMENS, power 0,70 - 24,5 KW (50-1.740 1/min)

adjustment of Kerf manually (ba adjustable screw)

central lubrication

spare parts (8 pc. cutting heads)

dimension (l x w x h):
scrap cutteing units - on base frame 3.150 x 1.000 x 850 mm
1 pallet with accessories (motor /)
wooden box with spare cutting heads) 1.350 x 650 x 750 mm

weight:
crap cutting units - on basic frame 2.040 kg
1 pallet with accessories (motor /)
wooden box with spare cutting heads) 290 kg
1993
Price  
    request
120980272 106

NATIONAL 9 Upset Forging Machine for sale
Horizontal Forging Machines


2,250 ton 9” National Heavy Duty Horizontal Forging Machine (Upsetter) - Re:24440 Forging tonnage rating 2,250 tons Gripping tonnage rating 1,125 tons Strokes per minute 25 spm Bar diameter rating 228.6 mm 9.0” ...

 
2,250 ton 9” National Heavy Duty Horizontal Forging Machine (Upsetter) - Re:24440

Forging tonnage rating 2,250 tons
Gripping tonnage rating 1,125 tons
Strokes per minute 25 spm
Bar diameter rating 228.6 mm 9.0”
Ram stroke 660.0 mm 26.0”
Grip opening 279.4 mm 11.0”
Gather 381.0 mm 15.0”
Hold 139.7 mm 5.5”
Crank pin diameter of main shaft 558.8 mm 22.0”

Length of main shaft bearings:
long 647.7 mm 25.5”
short 609.6 mm 24.0”

Distance face of wedge to face plate heading slide forward 1,778.0 mm 70.0”

Die space dims:
length 812.8 mm 32.0”
height 1,320.8 mm 52.0”

Thickness of each die 333.4 mm 13.1”
Main motor power 186.4 kW 250.0 hp

Floor space:
length 6.7 mtrs 22.0 ft
width 6.1 mtrs 20.0 ft

Net weight (approx) 243,182.0 kgs 535,000.0 lbs

Complete with:
• Heat-treated high-tensile alloy steel bedframe with heavy horizontal & vertical bedframe ribs provide maximum overall strength and rigidity
• Tie bars and massive bedframe sections support heavy forging loads providing accurate forgings with very little flash
• Long over-arm heading slide allows the cross tie section to be massive and located directly under the front bearing section of the heading slide adding bedframe rigidity in the vital die box area
• Solid stepped design pitman provides a large bearing area on the forward stroke, materially reducing bending and shear stresses as well as bearing loads on the wrist pin and pitman, contributing to the normally long life of these important parts
• Chrome-nickel-moly forged crankshaft
• Air clutch & Brake

Inspect at our Cleveland, Ohio USA Facility
 
Price  
  US   request
120975491 1405

KULI for sale
gantry crane


Kuli gantry crane in a hip version with angle cat for outdoor operation Manufacturer: KULI hoists â Helmut Kale Load capacity: 20 tons Wingspan: 20 m Year of construction: 1994 1 arm 3.50 m can be used Vehicle  ...
used machine
 
Kuli gantry crane in a hip version with angle cat
for outdoor operation

Manufacturer: KULI hoists â Helmut Kale
Load capacity: 20 tons
Wingspan: 20 m
Year of construction: 1994
1 arm 3.50 m can be used
Vehicle type: torsion hollow box girder, design according to DIN 15018

Kuli electric hoist type RS WE W 5200 L/4
as electrically powered angle cat

Hub-V: 4/0.9 m / min, fine stroke 1: 4.5
Lifting capacity: 15.5 kW / 3.8 kW
Load capacity: 20 tons
Lifting height: 10.5 m

Pen standard overhead truss type L 50
with flanged wheels

Wheelbase: 10,50 m, with pulp buffer 250 diameter
with traction drive type FKC 35
designed for V = 5-45 m / min frequency controlled
with motors designed with 4 x 2,5 kW
Operating voltage 400 V / 3 / 50 Hz

Original price: €227,000.00 net

The gantry crane is already dismantled and can be visited at any time!

Shipping is also possible on request.
1994
Price  
    request
<  page 6  >
You didn't find your wanted machine?   to all dealers(no registration necessary)
sell machinery
Sell your machinery
to the price starting with only € 0.09 monthly per machine!
machinery sold
Find used machinery dealers in your country