2266 offers

maximum number of results exceeded > 1000
please refine your search

Category: 305: peripheral equipment (e.g. heating,cooling,drying)
New in: 2001
Price: request quote
Location: Land-de DE 19061 Schwerin, Werkstr. 112
Seller: GloCon TST GmbH

Refrigeration units for 105 kW (90.344 kCal) manufacturer: BLUEBOX, Piove di Sacco model: ZETA ST 422 installed power: 51.4 kW protection rating: IP 44 refrigerant: 407C. Max.charge: 2 x 26 kg Max.refr.press. : 23.8 bar temperature: 25 ° C (ambient) weight: 1,142 kg pump: 3 kW (16-36 m³/h) water flow: approx. 25 m³/h vol min.water. : 450 l

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

bore capacity in steel (diameter): 30 mm throat: 250 mm bore stroke: 130 mm spindle taper MT: 3 MK table:: 380 x 380 mm column diameter: 98 mm turning speeds: 75 - 3200 U/min feeds: mm/U total power requirement: 1,1 kW weight of the machine ca.: 220 kg. range L-W-H: 0,5 x 0,6 x 2,05 mm ? machine base for clamping high workpieces ? Digital Depth Gauge ? Gearbox swivels 180 ° ? silent running through geärtete, ground oil-cooled gears ? Tapping Function ? electromagnetic clutch for drill feed ? automatic feed ? electric drive for table height adjustment

Category: 302: extruders
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

PREALPINA PELLETIZER For PE PP PC PS ABS flakes Hopper with dosing unit Extruder with screw diam. 105 mm. 35 L/D Average output 300/450 kg/h depending on materials Hydraulic power station ABB d.c. motor 117 kw Oil pump loop gearbox Dynisco pressure unit Vacuum degassing pump Screen changer 190 mm. diam. screens Die face pelletizer OR Strand pelletizer with cooling bath and mill Centrifuge Electric cabinet This line is offered with COMPLETE RECONDITIONING and WARRANTY

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

bore capacity in steel (diameter): 30 mm throat: 260 mm bore stroke: 135 mm spindle taper MT: 3 MK table:: 420 x 350 mm column diameter: 135 mm turning speeds: 125 - 3030 U/min feeds: 0,1 - 0,2 - 0,3 mm/U total power requirement: 1,1 kW weight of the machine ca.: 380 kg. range L-W-H: 0,9 x 0,55 x 2,2 mm ? machine base for clamping high workpieces ? Digital Depth Gauge ? Gearbox swivels 180 ° ? silent running through geärtete, ground oil-cooled gears ? Tapping Function ? electromagnetic clutch for drill feed ? automatic feed ? electric drive for table height adjustment

Category: 309: mills
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

PREVIERO GRINDER MU715M Conveyor belt with Metal Detector Infeed 900×1500 mm Granulation chamber 760×1500 mm Motor power 200 kw Rotating blades 6 Fixed blades 2 Grid 12 mm Extraction vent 18.5 kW Electrical cabinet Tilting loading tray hydraulic power station for knives and grid replacing Reel feeding unit (missing of motors and gearboxes) Construction year 1995

Category: 108: welding machines
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

table diameter: 1500 mm table load: 5,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 10000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,5 + 3,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE ? Self-locking gearbox, no pre- or after-run with eccentric load. ? Electronic components from Siemens and Schneider. ? Frequency-controlled, very accurate speed control. ? Turntable with large through hole and T-slots. ? High stability through a clever construction. ? CE certificate. ? Very good price / quality ratio. ? The D-TLP series comes with remote control and foot pedal (left / right). No orig ...

Category: 309: mills
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

GAMAN PLAST GRINDER Infeed 500×500 mm. Granulation chamber 450×480 mm. Motor power 15 kw Rotating blades 2 Fixed blades 2 Grid holes 12 mm Material extraction through collection box Construction year 1999

Category: 108: welding machines
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

table diameter: 2500 mm table load: 20,0 t swivelling range: 0 - 135 Grad turning speeds: 0,04 - 0,4 U/min max. torque on the faceplate: 40000 Nm table pass: 200 mm welding current: 1000 Ampere total power requirement: 5,5 + 11,0 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE ? Self-locking gearbox, no pre- or after-run with eccentric load. ? Electronic components from Siemens and Schneider. ? Frequency-controlled, very accurate speed control. ? Turntable with large through hole and T-slots. ? High stability through a clever construction. ? CE certificate. ? Very good price / quality ratio. ? The D-TLP series comes with remote control and foot pedal (left / right). No o ...

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-bg BG 6010 Stara Zagora, kv. Kazanski 21
Seller: OSLARKA Ltd

New complete line for recycling PET and PE materials. The line still in wood box.

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

bore capacity in steel (diameter): 40 mm throat: 350 mm bore stroke: 180 mm spindle taper MT: 4 MK table:: 560 x 560 mm column diameter: 150 mm turning speeds: 1450 U/min feeds: 0,1 - 0,2 mm/U total power requirement: 1,5 kW weight of the machine ca.: 700 kg. range L-W-H: 1,1 x 0,6 x 2,35 mm ? machine base for clamping high workpieces ? Digital Depth Gauge ? Gearbox swivels 180 ° ? silent running through geärtete, ground oil-cooled gears ? Tapping Function ? electromagnetic clutch for drill feed ? automatic feed ? electric drive for table height adjustment

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

TWIN SCREW WASTE MATERIAL PROCESSOR For a variety of applications : PE PP PS EPS ABS MIXED PLASTICS, RDF, ORGANIC WASTE, etc. Automatic process. No operator needed, huge output, heavy duty. Italian technology and material quality standards. Can be inspected in our premises for a few days more Construction year 2005 – used for tests only Used machine next-to-new (very few worked hours) Very versatile, can be used for a variety of applications as RDF, briquettes, wood plastic compounds or just to agglomerate moist plastics for further pelletising. Materials are subjectd to pressure and friction treatment. The friction generates heat which melts plastics and binds it to the other ma ...

Category: 108: welding machines
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

table diameter: 600 mm table load: 0,6 t swivelling range: 0 - 90 Grad turning speeds: 0,1 - 1,8 U/min max. torque on the faceplate: 450 Nm table pass: 80 mm welding current: 500 Ampere total power requirement: 0,18 + 0,18 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE ? Self-locking gearbox, no pre- or after-run with eccentric load. ? Electronic components from Siemens and Schneider. ? Frequency-controlled, very accurate speed control. ? Turntable with large through hole and T-slots. ? High stability through a clever construction. ? CE certificate. ? Very good price / quality ratio. ? The D-TLP series comes with remote control and foot pedal (left / right). No original ...

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

TPA COMPLETE TIRE RECYCLING PLANT Average output 2500 kg/h depending on % truck and car tires Production of granulate 0-2 mm and 2-4 mm. Shredder used for some weeks, the second part just tested with a few worked hours only. Constructed in 2006, started in 2008. 1- Metal ring stripper one – step x 2 rings removal Max 50 tires/hour 22 kw motor – dimensions: 4945x1900x1490 mm 2500 kg. 2- Double-shaft shredder SP1500 managed by PLC n.15 x 50 mm knives 98 mm thick in hardened steel on 6 sectors, base Dimensions: 2300x2300x1840 – mm. 2×75 kw hydraulic power drive – cutting chamber 1100×1423,5 mm. – dim.4000x1375x635 m. 9000 kg. 3- Shutter-type conveyor belt 1000 mm.wide, step  ...

Category: 108: welding machines
New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

table diameter: 800 mm table load: 600 Kg swivelling range: 0 - 135 Grad turning speeds: 0,1 - 2,0 U/min height adjustment: 850 - 1300 mm max. torque on the faceplate: 900 Nm engine output: 0,37 / 0,37 kW welding current: 500 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch. Welding power transmission for max.500Ampere.

Category: 308: other machines for plastic
New in: used
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

This Automatic Twin Screw Waste Material Processor is very versatile and it can be used for a variety of applications as: PE PP PS EPS ABS MIXED PLASTICS, RDF, ORGANIC WASTE, Briquettes, Wood Plastic Compounds or just to Agglomerate moist plastics for further pelletizing. It compacts and agglomerates material at a rate of 300-500 kg/h and more (depending on material – 1200 kg. with organic waste to make RDF) Italian technology and material quality standards. Materials are subjected to pressure and friction treatment. The friction generates heat which melts plastics and binds it to the other materials (if present). Therefore, the output is in form of long streams which need cooling and ...

Category: 108: welding machines
New in: used
Price: request quote
Location: 46342 Velen
Seller: WMT GmbH & Co. KG

table diameter: 1400 mm table load: 2,0 t swivelling range: 0 - 135 Grad turning speeds: 0,05 - 0,5 U/min max. torque on the faceplate: 6000 Nm table pass: 200 mm welding current: 700 Ampere total power requirement: 1,1 + 2,2 kW weight of the machine ca.: t ELDING TABLE WITH LARGE THROUGH BORE ? Self-locking gearbox, no pre- or after-run with eccentric load. ? Electronic components from Siemens and Schneider. ? Frequency-controlled, very accurate speed control. ? Turntable with large through hole and T-slots. ? High stability through a clever construction. ? CE certificate. ? Very good price / quality ratio. ? The D-TLP series comes with remote control and foot pedal (left / right).

Category: 308: other machines for plastic
New in: 2013
Price: request quote
Location: Land-it IT 13875 PONDERANO, VIA ANTONIO GRAMSCI 48
Seller: GERMANPLAST SRL

EXTRACTION CHAIN BELT (Lindner) Manufacturer: LINDNER 4.350 mm long With central chain transport and paddles Flat type on supports Stainless steel structure 5 kw motor + gearbox Construction year 2013 500 mm.outer width 400 mm.inside width

Category: 108: welding machines
New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

table diameter: 1500 mm table load: 5000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,05 - 0,5 U/min height adjustment: 1300 - 2050 mm max. torque on the faceplate: 10000 Nm engine output: 1,5 / 1,5 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Category: 704: fruits, vegetables, delicatessen, instant-meals machines
New in: 2014
Price: request quote
Location: Land-nl NL
Seller: Van Zutphen BV

Product number: 1333 Type: Hittpac AKH-019SE/1 Serial number: WK02/14 Year of construction: 2014 Capacity: 1800 - 2100 cups/hr Stations: 8 pcs. 1st dosing: 116 - 440 ml 2nd dosing: 60 - 210 ml Cups: ø 82 mm x 120 mm Power: 3 x 400V, 50 Hz, 9kW Dimensions: 2700 x 1800 x 2300 mm Boldt mobile lifter & product pump Type: BFBB350 Serial number: BFO14-021.01 Year of construction: 2014 Pump: Maso SPS-25"-98360703 Dimensions: 2000 x 1500 x 3150 mm Mettler Toledo checkweigher Type: XC3 Serial number: 36000229 Year of construction: 2009 Weight: max. 1500/3000g, min e=d=: 0.5/1 gram T=: -1500 gram Dimensions: 2650 x 800 x 1550 mm Grunwald Hittpac capping machine Type: A ...

Category: 108: welding machines
New in: used
Price: request quote
Location: Velen-Ramsdorf (46342)
Seller: WMT GmbH & Co. KG

table diameter: 2000 mm table load: 10000 Kg swivelling range: 0 - 130 Grad turning speeds: 0,02 - 0,2 U/min height adjustment: 1450 - 2200 mm max. torque on the faceplate: 20000 Nm engine output: 1,5 / 2,0 kW welding current: 1000 Ampere - Manual height adjustment. - Self-locking gearbox, therefore hardly any pre and after-run at eccentric Load. - Electronic components from Schneider, Siemens and Delta. - Frequency-controlled, stepless speed of the turntable. - High stability due to the robust construction. - CE certificate. The D-HBE series comes as a standard version with a cable remote control and a footswitch.

Category: 404: carton packaging machines
New in: 2014
Price: request quote
Location: AG BB1 2 Blackburn, 1 Evolution Park, Haslingden Rd.
Seller: IPR-PETMachinery

SMI WP 800 Wraparound Case Packer, 2014 Packing formats: Wraparound Carton Box, Tray & Cluster In Tray Formats packed: – Loose cans in wraparound carton: Classic cans: 500ml (4×6) – output 41 packs/min. Sleek cans: 330ml (4×6) – output 41 packs/min. Slim cans: 250ml (4×6) – output 41 packs/min. – Loose cans in presentation pack: Classic cans: 500ml (2×4) – output 70 packs/min. – Tray & Cluster In Tray: Classic cans: 330ml & 500ml – (4x(2×3) – two-gated – output 41 packs/min Sleek cans: 330ml (4x(2×3) – two-gated – output 41 packs/min Slim cans: 250ml (4x(2×3) – two-gated – output 41 packs/min Many more future formats possible, further ...

Category: 502: presses
New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

box opening: 1200 x 900 mm Baling dimension: H= 1000 mm

Category: 205: boring mills, machining centers
New in: used
Price: request quote
Location: 32683 Barntrup, Am Betonwerk 15
Seller: FWB-Maschinenhandel GmbH

CNC machining center Weeke type BP 05 Built in 1994 Working area x 2500 mm, Y Z 650 mm up to 50 mm gearbox with 10 individually retrievable spindles Drill diameter up to 35 mm 2 horizontal spindles in the x direction 1 upper milling unit with 2.5 kW console table with 6 beams Vacuum clamping device Weight approx. 2500 kg machine in good and demonstration-ready condition type tool including

Category: 1403: other storage equipment
New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

dimensions: 790 x 525/700 x 640 mm Stacking container with opening Different makes, Heson-type products made of sheet steel Robust steel construction for high stability and load capacity Including stacking edge for safe stacking Optimum space utilization, multiple stackable rusty spots. We recommend sandblasting and painting the boxes.

Category: 109: other metal working machines
New in: used
Price: request quote
Location: 63303 Dreieich, Odenwaldring 64
Seller: ReloConsult GmbH

KRUPP forging roll Roll width about 1,0 Meter, roll diameter about 0,4 Meter Dimensions 1,95 wide, 2,40 deep, 2,95 high, weight about 13to Gearbox, made by Westdeutsche Getriebewerke N=270, n/n1 = 750/26,5, KW 480/2 Dimensions 2,13 wide, 2,70 deep, 1,75 high, weight about 13,5to Elektromotor with slow start, 130 KW, weight about 2,2to - 2 used rolls for refurbishing addionally - 1 set of roll bearings brand new - tools for change of rolls System is disassembled and in storage. Could be loaded by overhead cran. Storage in Siegen We can get you in contact with the former service company. They are able to provide you with the following against costs: - production ...

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

number of spindles: 4 bore capacity in steel (diameter): 2 - 20 mm bore stroke: 100 mm throat: 210 mm number of spindle speeds: 4 spindle turning speed range: 355, 710, 1000, 2000 U/min transmission ratio: 2 motor speeds:: 2 distance between table and drill chuck: min 140 - max 350 mm table height: 835 mm table surface area: 1500 x 420 mm T-slots: 12 mm number of T-slots: 2 weight of the machine ca.: 1000 kg dimensions: 1500 x 600 x 1750 m drill spindle quick release chuck: METABO 3-16 mm series drilling machine with gearbox 4 METABO drill heads, all height adjustable with hand crank

Category: 1401: shelves
New in: 2009
Price: 15.000 €
Location: Neuss
Seller: Alexander von Westernhagen

Office Specialist bottom shipping slide system, schienenloses system, height approx. 2, 50 m, approximately 127 fields - used -: Price from site: â?¬15.000.-(net), plus dismantling etc.! Manufacturer: SSI Schäfer Type: R3000 Year of manufacture: 2009 Width of floors: 2 x 1, 28cm / 1 x 0, 99 cm Field depth: 600 mm Load capacity: 97.5 / 105 kg Field capacity: 585/ 630 kg Load capacity per car: 3.690 kg Car length: 3.692 mm (28 m, 2 fields a 1 and 1 box of 1 m) Height of the shelves: 2.50m approx. number of floors per box: 5 Length of rows of shelves incl. side-tracking skates: approx. 16 m, 1. 2 m aisle width Number of side-tracking skates: 18, Number of fixed s ...

Category: 1403: other storage equipment
New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

box lenght: 600 mm box width: 400 mm box depth: 425 mm internal dimension: 555 x 355 x 422 usable internal height: 407 Stack height: 410 mm volume: 90 L material: PPEL Colour: blau weight: 4,62 kg

Category: 1300: other machines and plants
New in: used
Price: request quote
Location: 63303 Dreieich, Odenwaldring 64
Seller: ReloConsult GmbH

This is an older glove box in top condition! Type MBraun MB 150 B/G-II with Turbo fan In principle, these glove boxes are still built by MBraun. Double box (two standard boxes linked together) 4 possible glove entrances 2 large locks 1 small lock 2 filter Documentation and operating instructions available In the box the workload can be carried out under inert gas atmosphere. The box has an automatic filter system that can easily be regenerated. Qoutation of the old offer: "The capacity of the plant allows a preservation of a inert gas atmosphere. The residual contamination of H2O and O2 in the atmosphere does not exceed the magnitude of 1 ppm. The cleaning principle is base ...

Category: 1403: other storage equipment
New in: used
Price: request quote
Location: Goldenstedt
Seller: WeMa A. Pigge GmbH

box lenght: 400 mm box width: 300 mm box depth: 280 mm internal dimension: 334 x 247 x 236 mm usable internal height: 221 mm Stack height: 265 mm volume: 19 L material: PP weight: 2,44 kg Colour: blau

Category: 1200: machines and plants for process engineering
New in: used
Price: request quote
Location: 27777 Ganderkesee, Industriepark 6a
Seller: Zech Water Technology GmbH

Technical specifications: automatic raw water supply: Exchange pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.5: 7.5 kWVorfiltration: Selbstreinigender filter with automatic SteuerungFilterfeinheit: 300 µmMaximaler flow rate: 40 m ³/hFlockungsstufe: flocculation tank: 2 x 0,5 m³ (material PP) charging pump, frequenzgeregeltFördermenge: 40 m ³/hFörderdruck: barLeistung 2.0: 5.5 kWRührwerke FlockungsbehälterDosierstelle for flocculant: static mix / Rohrflockulator (material PP) ) Ultrafiltration: number of UF modules: 8 Stck.Modulanordnung in the rack (x-series): 2Filterfläche of the UF modules: 60 m ² Backwashing and chemically suppor ...

Category: 103: milling machines
New in: 2006
Price: request quote
Location: Standort
Seller: IMZ Maschinen Vertriebs GmbH

x-travel: 4000 mm y-travel: 800 mm z-travel: 600 mm control: SIEMENS 840 D 0: 26/20 kW turning speeds: 6000 U/min tool taper: SK 50 tool change unit: 50-fach rapid traverse: 32 m/min total power requirement: 80 kVA weight of the machine ca.: 32 t dimensions of the machine ca.: 9,5x5,4x4,5 m swarf conveyor: cooling unit: High performance vertical CNC turning and milling center with SK 50 to vertical turning and milling, drilling, boring, threading, countersinking, rubbing in Mobile stand construction with two processing stations for pendulum machining. 2 machining stations for pendulum machining, the left station with Unisign carousel turning station and the right station with angle clampin ...

Category: 1403: other storage equipment
New in: used
Price: 260.000 €
Location: 89-60 Chojnice, Topole 40
Seller: Regalux Krzysztof Sutowski

We offer an automated small part storages AKL Mecalux manufacturer's for sale. The plant has been completely dismantled, certainly prepared for transport and is available at any time. It is an automated small parts warehouse consisting of from pallet racks, flow racks, Pack courts and conveyor systems. Flow racks have 4 storage level Pallet racks have 12 levels of storage per box. The operation held by the control unit. Boxes 600 x 400 x 300 of Max 20 kg can be transported on the conveyor system. We offer you a complete installation including control, documentation and visualization. If you have further questions, please contact me. Price, as well as more pictures upon r ...

Category: 101: boring mills and machining centers
New in: 2012
Price: request quote
Location: Deutschland
Seller: IMZ Maschinen Vertriebs GmbH

x-travel: 600 mm y-travel: 550 mm z-travel: 500 mm Control: SIEMENS 828 D tool change unit: 60-fach tool taper: SK 40 size of pallet: 400x400 mm pallet loading: 400 kg turning speeds: 10000 U/min Drive: 11 kW feed: 10 m/min rapid traverse: 36 m/min tool changing time: 4 sec max. tool diameter: 75 mm max. tool-dia with free toolbox: 130 mm max. workpiece length: 250 mm max. workpiece weight: 8 kg total power requirement: 40 kVA weight of the machine ca.: 10 t dimensions of the machine ca.: 3,6x2,7x2,8 m C-axis was not needed and is defective chip conveyor

Category: 405: pillow packs machines
New in: used
Price: request quote
Location: Land-uk UK DN10 Doncaster, unit 4, west stockwith business park,
Seller: UFM

stainless flow wrapper, adjustable folding box, rotary cutting jaws 240mm, variable speed, adjustable temperature controls, up to 150PPM, max foil width 500mm, max foil diameter 340mm

Category: 101: boring mills and machining centers
New in: 1999
Price: request quote
Location: Deutschland
Seller: IMZ Maschinen Vertriebs GmbH

x-travel: 1000 mm y-travel: 500 mm z-travel: 550 mm control: HEIDENHAIN TNC 426 PB table-size: 1150x600 mm table load: 1000 kg turning speeds: 12000 U/min 0: 18,5 kW rapid traverse: 24 m/min tool change unit: 41 -fach tool taper: SK 40 max. tool-dia with free toolbox: 125 mm max. tool diameter: 85 mm max. tool length: 350 mm max. tool weight: 6 kg total power requirement: kW weight of the machine ca.: 9,8 t dimensions of the machine ca.: 5,0x4,2x3,0 m swarf conveyor: internal coolant: 30 bar With pallet changer and tool changer Operating hours: Machine on: 20,862 h Control: 14,761 h Program run: 5,154 h

Category: 703: meat and fish processing machines
New in: 2001
Price: 18.500 €
Location: 04838 Eilenburg, Weinbergstr. 9
Seller: MMD-Food-Technik GmbH

Bowl Cutter / Cutter Mixer SEYDELMANN Type: K 60 ultra Facilities: 2 x knife speed 2 x Bowl speed 2 x mixing course Bowl: Stainless steel, 60 litres Noise protection cover Machine body: Stainless steel Control Seydelmann DGA 32 6 cutter head 3 cutter head 1 set spare blades for 6 series head 400V / 50 Hz Connection values according to type plate: 19 kW, 400V / 50 Hz / 41 A separate control box 2 spanner to the resolve of the cutter head are original manual / schematic etc. See State original images!

Category: 104: grinding machines
New in: 2017
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

tube diameter: 20 - 76,1 mm mm grinding band dimension: 100 x 2000 mm Band Speed: 1400 + 2800 upm speeds:: 2 engine output: 3,0 kW weight: 199 kg Belt grinder HighSpeed 150-D The belt grinder Metalwolff HighSpeed 150-D is an innovative belt grindig machine with high speed. (45 m/s ) The belt width is 150 mm. Changing the belt and working height is very simple and will take just seconds. Because this beltgrinder is a high speed machine you will finish grinding much faster. It will provide an excellent result for all your grinding jobs! ? Double speed motor. ? Rapid belt changing system. ? Vibration free operation. ? Adjustable working height. ? Incl. dust collection box. ? Incl. grinding belt ...

Category: 709: other food machines
New in: used
Price: request quote
Location: Land-lt LT
Seller: HERMIS

FOR SALE BDF 10 sections FORMING MACHINE COMPLEMENT. NEVER USE IN BOX WITH START-UP! -1 x IS 10 SECT.MACHINE - DG.5"1/2 C.D.,BDF ADV1000 ELECTRONIC SYSTEMBLOW/ BLOW,PRESS/BLOW, NNPB PROCESS. 2 pc. -SERVO FEEDER MECHANISM - BDF. TYPE - 66P 2 pc -FEEDER CERAMICS -ANCILLARIES FOR N.2 x 10 SECTIONS ELECTRONIC MACHINE -BDF-ADV1000 INTEGRATED ELECTRONIC CONTROL SYSTEM -5"1/2 DOUBLE GOB VARIABLE EQUIPMENT FOR N. 2 - 10 SECTIONS MACHINE - BLOW/BLOW PROCESS -TRANSFER BDF 888 SPEED UP -CROSS CONVEYOR TYPE 3800/03 -BDF-SDA02 TWO AXIS PERFORMANCE STACKER -SPARE PARTS -MANPOWER FOR SUPERVISION TO THE INSTALLATION AND PRODUCTION START-UP

Category: 107: sheet metal working
New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

chamfer lenght: 1050 mm plate thickness: 1,2 mm distance between columns: 1060 mm bending angle max.: 135 ° weight of the machine ca.: 190 kg dimensions of the machine ca.: 1,22 x 0,8 x 1,02 m Light weight angle bending machine, for simple but effective bending work. Especially suited for making boxes. Due to its price this has proved a popular machine for workshops and DIY. Upper and lower blade are segmented. With metal box for the fingers. upper and lower blade segmented 1 hand operation

Category: 101: boring mills and machining centers
New in: used
Price: request quote
Location: 63165 Mühlheim am Main, Carl-Zeiss-Str. 8-10
Seller: H.-G. Zach Werkzeugmaschinen GmbH

Type of machine: CNC vertical machining center. Manufacturer: Chevalier. Model: VMC 2552 L,. Control: Siemens 810 D ShopMill,. Year of construction: 2001. Condition: good,. Type of offer: used machine, ,. Technical data:. Paths: x = 1300 mm, y = 635 mm, z = 635 mm,. Spindle speed: 8000 rpm,. Spindle retainer: BT40. Tool changer: 32-fold tool changer. Spindle drive: 12.0 kW. Remarks:. spindle cooling. coolant system. several tool holder. measuring box. Weight: 7,500 kg,

Category: 104: grinding machines
New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

width of the strips: 150 mm band length: 2000 mm band speed: 37 m/s : 150 x 520 mm total power requirement: 4 kW weight of the machine ca.: 140 kg dimensions of the machine ca.: 1,2 x 0,8 x 1,1 m The serrated contact wheel of 250 mm in diameter and the really powerful motor ensure excellent grinding quality and performance. Powerful material intake and a belt speed of 37 m/s assure efficient performance and an excellent finish. Quick change from horizontal to angled belt position. Vibration free, smooth running. Solid work table for end-feed grinding. Efficient material removal for more effective production. Dust and chips outlet to collector box. 4 kW motor unique dust collector belt adjust ...

Category: 818: presses: other
New in: 2000
Price: request quote
Location: 14513 Teltow, Ruhlsdorfer Str. 100
Seller: UES - Universal Extrusion Service

6. Printing stations. 6 color stations. 2 bottom pressure stations. Good condition

Category: 105: saws
New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

cutting diameter: 330 mm saw band length: 3870 x 34 x 1,1 mm cutting width: 400 mm band speed: 15 - 90 m/min : 400 x 200 mm cutting capacity - round: 330 bei 90° mm : 250 x 140 mm cutting capacity - round: 240 bei 45° mm work height max.: 945 mm cutting capacity - square: 320 bei 90° mm cutting capacity - square: 200 bei 45° mm total power requirement: 3,0 kW weight of the machine ca.: 720 kg dimensions of the machine ca.: 2650 x 2040 x 2050 mm Very robust machine framework composes of castings from grey cast iron andensures vibration absorption. In order to achieve maximum stiffness of the whole system and cutting accuracy, the band saw arm is attached to a sturdy turntable on both side ...

Category: 404: carton packaging machines
New in: 2004
Price: request quote
Location: Land-es Spain, 47151 Valladolid
Seller: MachinePoint

Tray Packer Somic KA 412 ST 10 Trays for small yoghurt cups

Category: 104: grinding machines
New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

width of the strips: 75 mm band length: 2000 mm band speed: 37 m/s total power requirement: 4 kW weight of the machine ca.: 125 kg dimensions of the machine ca.: 1,0 x 0,7 x 1,1 m The serrated contact wheel of 250 mm in diameter and the really powerful motor ensure excellent grinding quality and performance. Powerful material intake and a belt speed of 37 m/s assure efficient performance and an excellent finish. Quick change from horizontal to angled belt position. Vibration free, smooth running. Solid work table for end-feed grinding. Efficient material removal for more effective production. Dust and chips outlet to collector box. 4 kW motor unique dust collector belt adjustable through pat ...

Category: 101: boring mills and machining centers
New in: 1998
Price: 61.000 €
Location: 67500 HAGUENAU, 20 RUE AMPERE
Seller: SOCIETE FIMOTEC

Machining center - universal lid MAHO DMU 70V bearing no 1105-02463 category machining center - universal make lid MAHO type DMU 70 V year 1998 State second-hand machine control CNC MillPlus iT HEIDENHAIN storage HAGUENAU D country of origin eutschland delivery time from site technical details please enquire cargo base x way 710 mm y way 5200 mm z-way 520 mm control MillPlus iT HEIDENHAIN main spindle: RPM - spindle of 20 - 18,000 min /-1 power - main spindle 35 / 25 kW Max. Torque 130 / 87 nm tool holder HSK A63 NC swivel rotary table: table size 700 x 500 mm swivel area 180 ° rotatable C: B-axis 360 ° Max table load 350 kg centring hole 30 H6 mm T-slots 7 x 14 H 7 x 63 mm table speed ran ...

Category: 105: saws
New in: 2018
Price: request quote
Location: Werk
Seller: Sperling Werkzeugmaschinen

cutting diameter: 300 mm saw band length: 3150 x 27 x 0,9 mm cutting width: 375 mm band speed: 15 - 90 m/min : 375 x 190 mm cutting capacity - round: 300 bei 90° mm : 240 x 160 mm cutting capacity - round: 240 bei 45° mm work height max.: 910 mm total power requirement: 2,2 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 2180 x 1660 x 2030 mm Continuous adjustment of the cutting angle within the range 90°?60° when the workpiece is clamped tight. Very robust machine framework composes of castings from grey cast iron and ensures vibration absorption. Modern concept of the band saw arm allows for large cutting ranges in upright and angular cuts. Simple locking and adjust ...

Category: 703: meat and fish processing machines
New in: used
Price: 10.700 €
Location: Land-ro RO Bucharest
Seller: Kuhn & Partner Romania SRL

Description Brand Roser Model Basic Line ID SH5201 Status Active Year of manufacture 2005 Location Bucure?ti / Bucharest (RO) Cutting and deboning line with 16 tables Roser Basic Line manufactured in 2005 with top conveyor belt for bones, foldable scraper for easy cleaning and visual inspection, stailess steel gearbox housing, main conveyor has modular belt, polyethylene top. ExWorks. Price is negotiable. Contact Tel.: +40-359/175.575 Fax: +40-259/426.248 Mobil: +40-743/177.040 ; +40-740/221.698 Technical inspection can be organized at least 24 hrs before the due date We speak English. Wir sprechen Deutsch. (+40-740/221.698 ) Hablamos Español. Beszélünk magyarul ...

Category: 103: milling machines
New in: 1982
Price: request quote
Location: 89312 GÜNZBURG
Seller: Ralf Schmeißer Werkzeugmaschinen

x-travel: 560 mm y-travel: 500 mm z-travel: 450 mm turning speed range - stepless: 31 - 3150 U/min taper ISO: 40 quill stroke: 80 mm feed speeds infinitely variable: 4 - 2000 mm/min rapid traverse: 6000 mm/min power capacity: 2,0/4,0 kW total power requirement: 16 KVA weight of the machine ca.: ca.2,4 t Optical condition: good: Mechanic: good: The machine can be viewed under current.: 2810 0501 380 V, 50 Hz, colour: green - CNC-Control Deckel Dialog 4 - 3D-path control with projector graphic - hdrydaulic tool-clamping - Vertical-Head ± 90°swiveable with Index on 0° - seperate control cabinet - machine lamp - coolant equipment - central lubrication, - fixed angel table - chip tray - too ...

You didn't find your wanted machine? send wanted inquiry to all dealers (no registration necessary)