bowl lift used for sale

We offer LTG-TowerMax L 40.0-340-2448-816-8760 storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Overall height 8760 mm Overall width 2778 mm Installation depth 2800 mm Total payload machine up to 2 x 20,000 kg 48 carriers for up to 340 kg payload each in clear usable dimensions: W = 2448 mm T = 816 mm Usable height up to 60 to 750 mm Start of the operating opening in 900 mm above OKFF, then 800 mm high, lift door manually operated, Engine power Vertical drive 3.0 kW / 400 Volt Horizontal drive 0.37 kW / 400 Volt Colour scheme grey/orange, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring countries

Hubkneter, Fabr. Diosna Type D200 A

Hubkneter, Fabr. Kemper Type F 50 SL

Lifting mixer, Diosna Type S 120 a, extendable

Boiler lifting tipper Kemper HK 200 for Kemper President boiler - Lifting tipper - Manufacturer: Emil Kemper GmbH - Model : HK 200 - with boiler drive and boiler peeling - for Kemper President Kessel

F. No.: 119490 Equipment / further information: Load capacity: 2200 kg

weight max. in kg: . kg Gripping range: . mm Suspension: . 0 weight: . kg weight max.: . t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 2000 kg Gripping range: 1050-1200 mm Suspension: . 0 weight: 180 kg weight max.: 2 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3000 kg Gripping range: bis 400 mm Suspension: 250 mm weight: . kg weight max.: 3 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

weight max. in kg: 3000 kg Gripping range: bis 400 mm Suspension: 250 mm weight: . kg weight max.: 3 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We offer an LTG-TowerMax L 20.0-190-1850-825-9500 storage lift modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Overall height 9,500 mm Overall width 2200 mm Installation depth 2700 mm Total payload machine up to 2 x 10,000 kg 58 carriers for up to 190 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1850 mm T = 825 mm Usable height up to 65 to 750 mm Start of the control opening in 870 mm above OKFF, then 800 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighbori ...

weight max. in kg: 2000 kg Gripping range: 550-650 mm Suspension: . 0 weight: . kg weight max.: 2 t clamping width: . mm total power requirement: . kW weight of the machine ca.: . t dimensions of the machine ca.: . m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type SLX1515E Load capacity: 1500 kg Lifting function electric/hydraulic Battery, 12/60 Ah Lifting height: 800 mm Handlebar/fork wheel, Ø 180 / Ø 75 mm Fork length: 1500 mm Fork width: 800 mm Wheel Type: Polyurethane Made in Denmark Weight 198 kg Transport dimensions 2100x550x1300mm

We offer an LTG-TowerMax L 20.0-210-1650-825-8700 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Overall height 8,700 mm Overall width 2000 mm Installation depth 2700 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 210 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1650 mm T = 825 mm Usable height up to 75 to 750 mm Start of the control opening in 870 mm above OKFF, then 800 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.25 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighbo ...

Lifting kneader, Fabr. Kemper Type F 125 S

Various lifting cylinder lengths from 80 cm to 100 cm, single-acting Diameter 12 to 15 cm more lifting cylinders in stock

We offer an LTG-TowerMax L 20.0-250-1250-825-10000 storage system modernized by us with a completely new StoreControl L control system. Exterior Dimensions: Height 10,000 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 90 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 75 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/blue, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, Delivery and installation currently mainly in D, A and several neighboring coun ...

table length: 1300 mm table width: 800 mm stroke height: 1015 mm weight max. in kg: 3000 kg : 220 mm connected load frequency: 400 V total power requirement: 1,5 kW weight of the machine ca.: 0,32 t dimensions of the machine ca.: 1,3 x 0,8 x 0,23 m The hydraulic lifting tables are electrically driven and operated. Have a contact strip for safe lowering operation. Wide applicability for workshops, assembly departments, loading pits, etc. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

; Gross weight [kg]: 2330; Inspection Date: 2026-03-23; Amount of previous owners: 1; Lift height[mm]: 815; Maximum lift capacity [kg]: 450

We offer LTG-TowerMax L 20.0-250-1250-825-7200 vertical storage systems modernized by us with a completely new StoreControl L control system. currently 2 identical machines available Exterior Dimensions: Height 7200 mm Overall width 1600 mm Overall depth 2680 mm Total payload machine up to 2 x 10,000 kg 78 carriers for up to 250 kg payload each (additional carriers optionally available) in clear usable dimensions: W = 1250 mm T = 825 mm Usable height up to 65 to 750 mm Start of the operating opening in 865 mm above OKFF, then 850 mm high; can be operated manually with lifting door, Engine power Vertical drive 2.2 kW / 400 volts Horizontal drive 0.29 kW / 400 Volt Colour scheme grey/dark grey, Traeger galvanised Surface cleaned, traces of use possible subject to errors as well as technical changes or detail deviations in photos, pictures of an identical ma ...

Brand: Muyen Type: Vacuum lifter Model: 500 kg, Yellow Power: 0,20 kW Length mm: 800 Width mm: 350 Height mm: 1350 Transport size: L x W x H: 2,5 x 0,35 x 1,35 Condition machine : Working, rejected Electric. Connection: 16A 400V Documentation: No Instructions: No Electric diagram: No

Width 68 cm Year of construction 2006 Lifting Punching Machine Computer control with monitor Touch screen Price on request. We deliver and install worldwide!

Lifting jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, lifting jack thread -Load racks: 6 pieces, 450 mm height -Base plate: 450 x 350 x 20 mm -Shäkel plate: 146 x 146 mm, M42 2 pieces with shäkel -Price: complete -Dimensions: 450/350 / H450 mm -Weight: 60 kg / pc.

Load jack, swivel jack, lifting jack, shackle, load lifter, lashing eye, lashing, anchor point, load jack thread -Load lifter: 4 pieces, holder Ø 80 mm -Shackle: M24 2 pieces per part -Price: complete -Dimensions: 250/155 / H250 mm -Weight: 36 kg / pc.

-2 lifting mixers with extendable stainless steel kettle -2 machines with 4 boilers -Manufacturer: Emil Kemper GmbH Conversion of Meyma -Model: F125ALS -a cauldron for max. 125 kg of flour or for max. 200 kg of dough -with 2 speeds -optionally also with lifting tipper

-mobile Kemper lifting tipper -for boiler spiral mixer Kemper SP 150 A -Height: 200cm -Width: 118cm -Depth: 193cm -overhauled 2016

Installed in roller table ame899 Distance between axles : 1.96 m Number of strands : 4 pieces Drive power : 2.2 kW - Can be integrated into driven roller conveyor - Transport of the cut material by link chain chain and screwed-on drivers - Driven by geared motor - Chain carrier made of profiled steel Year of construction 1979 Revision year 2014

Permanent Overbelt Magnetic Separator TYPE DMPM1400 1.600 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.000x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 7 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Lifting mixer Diosna D240 Plus Lifting kneader Diosna D 240 Plus with fixed kesel - with stainless steel boiler - Kettle for a maximum of 240 kg of dough or for a maximum of 150 kg of flour - 2 speeds slow and fast - with flour dust cover - Mobile on castors - 380 volts - Machine completely repainted

Permanent Overbelt Magnetic Separator TYPE DMPM1200 1.800 x 900 x 220mm = Solid steel construction, welded Welded & painted construction RAL 7016 (anthracite grey) Magnet dimensions: 1.200x500x180mm Drive roller + deflection roller S235 steel welded and machined Ø220x700mm spherical overtightened, shaft fixed with tension bearings. Drive: Slip-on geared motor GEMOTEG 1.1KW, speed 0.4-0.6m/sec Connection 400V, 50Hz IP54 protection Drive ready for connection up to motor terminal box (Commissioning must be carried out by a qualified electrician) PU conveyor belt DM 20/2 0+010 PU black matt 5,4mm thick Conveyor belt width: 700mm 9 pcs. TG-40 cleats high-frequency welded Belt material: 3-ply particularly transversely stable Equipped with stainless alligator connectors RS125 Magnet Features: Built-in magnetic core: Strontium Ferrite Y30 Bonded SfRe strontium hard ferrite  ...

Lifting mixer Kemper F 200 ASL - with 2 speeds - with 2 automatic timers (New) - with stainless steel lifting arm - max. 200kg flour or 320kg dough per kettle - with flour dust cover - Kettle with handle - All ball bearings renewed - V-belt new - Machine completely repainted

Lifting device for 200-litre containers Manufacturer: Carnitech Type L 125 Dimensions 1300 x 1500 x 4050 mm Power 3 x 400 V, 50 Hz, 0.75 kW With slide for liquid products

Pallet truck, pallet truck, stacker, pedestrian pallet truck, forklift truck -Load capacity: 500 kg -Lifting height: 1490 mm -Dead height: 1920 mm -Width: 630 -Length: 1000 mm -Platform: 600 x 600 mm -with: hand pump -Dimensions: 630/1000/H1920 mm -Weight: 114 kg

Used lifting mixer DIOSNA, type: S 35 -in bakery condition- - for 35 kg of dough - 2 courses - with timer -Dust cover - Machine runs smoothly - Technically tested and cleaned - very nice condition Inspection and test run are of course possible by arrangement.

Lifting strap, lifting strap, crane strap, lifting sling, round sling, lever hoist, chain hoist, crane, assembly hoist, assembly chain hoist -Load capacity: 10,000 kg -Length: 17.3 m -Number: only one piece available -Weight: 72 kg

Translyft Rotary table scissor lift Translyft 3Tonne hydraulic scissor lift with rotary table, table diameter 1300mm, mounted on weigh cells with a scale, 3Ph

Lifting kneader Diosna Kneader extendable Model: D 200 A for max. 200 kg dough depending on the TA Dough machine with flour dust cover 2 tank cars with tilting device 2 gears, with protection circuit Connection 400V, 32A-CEE plug Machine Many more lifting kneaders in stock!

Lifting kneader, Diosna Type S 120 a

Lifting table, lifting platform, lifting platform, car lift -Manufacturer: Nussbaum -Load capacity: approx. 1000 kg -Foot dimensions: 740 x 420 mm -Max. stroke: approx. 1600 mm -with control -Dimensions: 3200/1930/H450 mm -Weight: 494 kg

for sale YALE Mid-Stroke Order Picker Model MO10EAC Gripping height up to 3 meters Load capacity 1000 kg Platform lifting height up to 1.2 m Fork length 1150 mm incl. battery and charger Total weight approx. 1775 kg further models and inquiries to FSA Maschinen AG

It is a used, reconditioned Diosna mixer S 120 Plus (for max. 120kg dough / 75kg flour) for sale. The machine is in very good condition and fully functional. The mixer has a stainless steel bowl, stainless steel kneading arm, a flour dust cover, two speeds and is mobile. The machine has a new control system with two timers. A video can be sent on request. Price on request.

Lifting kneader Diosna Kneader extendable Model: D 200 A for max. 200 kg dough/TA 160 (rye mixed bread dough) Stainless steel boiler 300 liters Dough machine with flour dust hood according to HACCP 2 tank cars with tilting device Stainless steel kneading arm with turning mechanism 2 gears, with protection circuit with timer DGUV V3 tested Connection 400V, 32A-CEE plug Used machine overhauled with 6 months warranty Option: Ground fastening Delivery Maintenance contract E-Box Service Package Many more lifting kneaders in stock!

- old German quality, virtually indestructible. - Aluminum boiler - With steel lifting arm - without lid / protective grille - with age-related signs of wear and tear and Wear and tear see photos - Shell diameter 76 cm (inside) - Shell height: 44cm (inside) - Height: 114 cm (lowest position) - Width / Length: 99cm x 83cm - 380 volts

Lifting pulley, pulley, rope pulley, steel rope pulley, rope pulley, rope pulley block, hydraulic lifting pulley -Mower lift: Lifting roller with hydraulic cylinder -Hydraulic cylinder: Bosch stroke 190 mm -Number: 2x mower lifts available -Price: per piece -Transport dimensions: 480/130/H67 mm -Total weight: 6.1 kg/piece

Lifting strut, lifting gear, lifting drive, lifting linkage -Lifting strut: hydraulic lifting rod -Type: unfortunately no type designation -Part No.: 831/65 U10-2.8 -Dimensions: see photos -Dimensions: 1070/210/H130 mm -Weight: 12.7 kg

Used Lifting Kneader KEMPER, Type: F 75 -Refurbished- - for 75 kg flour or 120kg dough - Incl. dust cover - Condition: Very good, ready to use - 6 months warranty Visits and test runs are possible by arrangement.

Spiral mixer, Fabr. Kemper,Type SPL 125