bowl lift used for sale

Loading unit: LMZ 3050 suitable for: L3030 and L3050 Max. sheet size, load/unload: 3000 x 1500 mm Max. sheet thickness, unload: 20 mm Cycle time: 230 sec

Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station

Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg Basic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking station Basic configuration: ? synchronous loader ? peeling device ? measuring device for thick sheets ? movable unloading rake ? raw material unpacking station ? maximal stack height on loading side is 90 mm ? maximal stack height on unloading side is 250 mm LiftMaster Compact options ? Additional pallet for finished parts ? Separation of thin sheets (s=1-2 mm) ? Scraper for slats (cleaning brush) ? Storage interface

Syspal Multipurpose lifter 2020, Stainless, mobile, max lift 105Kg, lifts up to 1900mm

- Speed of 15 cm/s - 6 seconds from low to high chamber of the oven. - For double wide ovens. - Setter movement up and down: gear drive. - Setter movenment into hearth chamber and vice versa: manual. - Setter belt back and forth: manual.

Lifting capacity: 9 ton

Fahrzeugruppe Fabr. Locksmiths, 16 floors, 320 / 640 mm, double joint, board size 1400 x 950 mm, with turntable and support arm adjustment, Simatic S 7 control, laser path detection. Mast with storage 16 floors 320 / 640 mm double joint board size 1400 x 950 mm Sinking scaffold with accumulator 16 floors 320 / 640 mm double joint board size 1400 x 950 mm The machines and plant components are still in operation and can be inspected in consultation with us.

Trumpf Trumatic L3050 + Liftmaster LMZ3050 CO2 Laser Cutting Machine + Loading & Unloading System - Trumpf Liftmaster LMZ3050 automatic loading and unloading system - Siemens Sinumerik 840 control system - Trumpf TLF 5000TM Laser - Laser power 5 kW - Table size 3000 x 2000 mm - Interchangeable table - Automatic nozzle cleaning - Year of construction 2004

Key data: 1500 mm

Trumpf TruLaser 5030 + Liftmaster LMZ3050 - CO2 Laser Cutting Machine + Loading & Unloading System Laser power:6000 W Working area:3000 x 1500 mm - Trumpf Liftmaster LMZ3050 automatic loading and unloading system - Siemens Sinumerik 840 control system - Trumpf TruFlow 6000 laser source - Laser power 6 kW - Table size 3000 x 1500 mm - Interchangeable table - Hinge belt conveyor - Operating hours beam: approx. 31000 h - Laser operating hours: approx. 57000 h - Year of construction 2013

Polar LL 600-K-3 - lift year 1997 max. size: 905 x 1,110 mm max. lifted weight: 600 kg good condition

Round and long weavers, Fabr. Kemper, Type RULAX with Liftomat

General SKU349U858 LocationBarneveld MakeServolift TypeHF 250 No.10815 Year of construction2003 Main Features MaterialStainless steel/Aluminium Motor1.5 KW Height2950 mm Specified Features - Lifting/tilting machine MaterialStainless steel 1.4301 (304) Lifting machinecheck Lifting + tilting machinecheck Max. weight250 kg Lifting heightmin. 400 mm: max. 2950 mm Tilting heightmax. 2950 mm Hydraulic drivecheck With hydraulic unitcheck (Merk: LOTZ, type: MC4-V1B-PM-MN-T07-F5) Motor1,5 kW, 400 volt, 1400 rpm Suitable for product sizesDia. 570mm Information With switchcheck Weight650 kg CEcheck Floorspace0,65x0,67 m Total height4 mMinerals & inorganicPlastic & rubberAPIPlastic & polymersBiopharmaceuticalDyes & pigmentsBeveragesAgrochemicalsSolid pharmaceuticsConfectioneryLifting/tilting machinesBiotechnologyOther feedRubberAnimal feedDairyLubricants & oleoOther chemi ...

General SKU389S518 LocationBarneveld MakePromitec Rührtechnologie TypePROMI LIFT B 030 RXD No.10007437-1-1 Year of construction2019 Main Features MaterialStainless steel Motor2.2 KW Length750 mm Specified Features - Stirrer StirrerCup mixer PROMI JET - classic cone element Shaft length750 mm Sizes stirring headCup dimension, dia. 85mm dia.55mm, l=90mm (3x) Motor2,2 kW 230/400 Volt (Ex) With variable speed drivecheck Speed mixing shaft0-1400 rpm Mounted on supportcheck Adjustable height1200 mm MaterialStainless steel Information With switchcheck Weight340 Kg CEcheck Floorspace1,3x1,0 M Total height2,3 M ATEX compatiblecheck Extra Specificationswith height-adjustable lid, with clamping device. unused StirrersPromitecMixers > StirrersBrand > Promitec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Read ...

General SKUR0227 LocationBarneveld MakeDalmec TypePartner No.917746 Year of construction1991 Main Features MaterialMild steel Information Total height0,8 M Weight610 Kg Floorspace1,7x1,7 MMiscellaneous transportDalmecConveying systems > Miscellaneous transportBrand > Dalmec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

lifting capacity:10000 kg empty weight:143 kg dimensions:2450 mm height:366 mm width:195 mm length maximal:4250 mm Extendable to ( + 2 x 800 JP):8500 mm Guarantee:12 Monate Shackles:4 + 4 Stück extensions (each 1 Set, 4 pcs):800 JP Webbing sling attachement:800 LKP 4 point lifting bracket :800 LK Lifting bracket, wide:800 NKL Equalizer plates:800 TL Unwinder:800 AR 7 Rack:800 ST 2

lifting capacity:20000 kg empty weight:326 kg dimensions:2450 mm height:455 mm width:240 mm length maximal:4250 mm extendable to ( + 800 JP):6200 mm Extendable to:8500 mm Guarantee:12 Monate Shackles:4 + 4 Stück extensions (each 1 Set, 4 pcs):800 JP Webbing sling attachement:800 LKP 4 point lifting bracket :800 LK Lifting bracket, wide:800 NKL Equalizer plates:800 TL Unwinder:800 AR 7 Rack:800 ST 2

lifting capacity:3000 kg empty weight:83 kg dimensions:2450 mm height:320 mm width:170 mm length maximal:4250 mm Guarantee:12 Monate Shackles:4 + 4 Stück Extendable to:6200 mm max. number of extensions (each 1 Set, 4 pcs):800 JP Webbing sling attachement:800 LKP 4 point lifting bracket :800 LK Lifting bracket, wide:800 NKL Equalizer plates:800 TL Unwinder:800 AR 7 Rack:800 ST 2

lifting capacity:30000 kg empty weight:429 kg dimensions:2450 mm height:535 mm width:265 mm length maximal:4250 mm extendable to ( + 800 JP):6200 mm Extendable to:8500 mm Guarantee:12 Monate Shackles:4 + 4 Stück extensions (each 1 Set, 4 pcs):800 JP Webbing sling attachement:800 LKP 4 point lifting bracket :800 LK Lifting bracket, wide:800 NKL Equalizer plates:800 TL Unwinder:800 AR 7 Rack:800 ST 2

lifting capacity:5000 kg empty weight:264 kg dimensions:4900 mm height:366 mm width:195 mm length maximal:8500 mm Guarantee:12 Monate Shackles:4 + 4 Stück Webbing sling attachement:800 LKP 4 point lifting bracket :800 LK Lifting bracket, wide:800 NKL Equalizer plates:800 TL Unwinder:800 AR 7 Rack:800 ST 2

lifting capacity:50000 kg empty weight:647 kg dimensions:3270 mm height:740 mm width:480 mm length maximal:4470 mm extendable to ( + 4 x 800 JP):12470 mm Guarantee:12 Monate Shackles:4 + 4 Stück extensions (each 1 Set, 4 pcs):800 JP Webbing sling attachement:800 LKP 4 point lifting bracket :800 LK Lifting bracket, wide:800 NKL Equalizer plates:800 TL Unwinder:800 AR 7 Rack:800 ST 2

Model: Liftomat for the transfer of dough divider into a RuLa movable on a frame Output approx.: 900 pcs/hour Connection 400V, 0.5 kW, 16A-CEE plug Used machine overhauled 6 months warranty With us you will find a large selection of bakery equipment!

Planetary Mixer Bear Varimixer AR 80 VL1S Year of construction: 2017 Digital timer Variable speed control Electric bowl lift Automatic bowl fixation Bowl volume: 80 L Incl. 2x bowls with truck Incl. 1x whip, 1x flat stirrer All tools in stainless steel

roller cutter, overhauled, working width: 110 cm, roller diameter, 100 cm, pneumatic winding shafts 70/76/150 mm, hydraulic lifting/lifting device, side edge control, dancer roller, load control with control brake, surface needle, Siemes S5 Still in operation: Yes Available: immediately

Lifting device standing, pneum. Fabr. Bittler T3 FT, 6 Bar, Y.O.M. 92 to 2002 Stroke 800 mm, lifting force 350 kg, adjustable forks 600 mm, safety shutdown when lowering for lifting trolleys when loading machines by hand, or when re-sorting

MATEC forklift blades are robust and easy to build and can be attached to almost any commercial lyklift. With a fuse bolt, the tilting device can be blocked for special inserts. The front shutter flap can be mounted on any shovel. The interchangeable scraper is suitable for planing work such as removing ice, repelling soil, gravel or feed, etc. - Bucket width 1950 mm - Bucket depth type 1: 1000 mm, shovel depth type 2: 1330 mm - Bucket height without attachment 450 mm - Weight approx. 220 kg - Payload 2000 kg - Steel sheet 4 mm industrial lypainted - Fork shoes axle distance 800 mm - Fork tine width max. 170 mm - Fork thickness max. 60 mm - 4 lifting eyelets for krange slopes - Tilting device for cable pull with lifter and spring reset, securing bolt Options at extra cost: - Type 2 shovel depth 1330 mm Total price € 1590.00 - Front shutter € 590.00 - hydr. Liftin ...

We sell a Czwaluk lift truck here. This lifting tipper was designed and built by us. The frame is made entirely of stainless steel has a maximum load of 600kg, a tipping height of 2800mm with a tilting angle of 45., This lifting tipper can be manufactured for you according to your wishes. Whether tipping height or boiler fork , anything possible.

Hoffmann rail crane, track 1m, telescopic crane extension 16m, lifting load 16t, electric overhead drive, or MAN diesel engine. Weight approx. 45t. For questions 0049 1604444300 net price 12.500,-€

Robust diesel generator with soundproofing on sled. 3-phase generator with harmonized arousal. Technical data: - Rated power 30 KVA - Diesel 495D, 4 cylinder water-cooled, 33.0 kW/45 hp - Consumption average 258 g/kWh - Electric start - Current 43.3 A - Frequency 50 Hz - Voltage 220V/3x400V - Cable outlet 40A with 20 m PUR cable 3PNE, circuit breaker 3phase, Operating hour counter - ATS (Automatic Transfer Switch) with automatic start repetition, Activation of the current cover, automatic shutdown in case of lack of oil pressure, Overheating, excessive speed - slide with 4 lifting eyelets, length approx. 2300mm, width approx. 1300 mm, height approx. 1600 mm, Weight approx. 900 kg Option at extra cost: - Distributor swells with suitable sockets at the end of the cable - Suspension Warranty: 2 years on all non-wear parts or 2000 operating hours, which is m ...

<br>Working width: 1320 mm, outside diameter 1300 mm, inner diameter 70-155 mm, shaftless discharge discharge with lifting platform for nut rollers, upwinding with pneumatic extension shaft and mechanical device for finished rolling, lifting core inner diameter 76 mm, machine in production<br><br><br>br>

Laska cutter 60 liters Completely stainless steel Bowl in stainless steel Knife shaft infinitely variable speed control With digital display With stainless steel control cabinet Machine without ejector With noise protection cover

Cat. No. 11-4105 in very good condition Material: V2A - AISI 304, 1.4301- Surface: inside and outside 2B=IIIC Topsoil: with manhole pressure cap 1.5 bar test pressure DN 400 with 6 star head screws, with handle bracket, Threaded welding nozzle DN 50 Tank body: manhole 430x300 mm Underbody: Konusboden 45 with forward-drawn outlet pipe with disc valve DN 65, with forklift shoes, with stable frame, with pallet lift truck all sides underpassable. Test pressure: 1.5 bar Working pressure: 0.99 bar DxH: 1100 x 2200 mm - Weight: 230 kg Supplements/pieces (on request): Fermentation spandconnection DN 50 Euro Trial tap Blind cap DN 50 Fermented spundar fitting CIP Cleaning The price is for a tank. For inquiries: Tel: 09353 90905-0 or Fax: 09353 90905-22 Mobile: 0171 651 82 48 On request, we will be happy to send you our c ...

BOGENSORTIERANLAGE Manufacturer Gremser Type: S102-A2 Manr.: 410663 Built: 1999 Maximum size width: 102 cm Length: 142 cm Minimum size width: 40 cm Length: 50 cm Material grades 60 g / m2 to 120 g/m2, securities Arc Alignment +-0.1 mm Processing Minimum: 30 m / min Maximum: 140 m / min Maximum power 140 cycles / min Maximum stack height feeder: 1550 cm Good sheet display: 1600 cm Poor bow delivery: 1100 cm Maximum lifting weight 1000 kg Supply voltage 500 V AC Machine weight 2000 kg Dimensions: Width: 190 cm Length: 1220 cm Height: 270 cm Inlet height: 1750 mm Note: Sorts sheets of paper with quality defects (holes, stains, scratches and other irregularities, damage ? Total fault diagnosis was renewed in September 2005 Investment costs: 156,000.00 € Mistakes reserved!

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 20ft (6m) office container - 20ft (6m) sanitary container Special versions such as Double Door, Flat or Open Top are always available at short notice. Sightseeing is possible at any time and at short notice, for this we ask for a short telephone arrangement. Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 28mm waterproof hardwood floor. 20 feet (6m) of sea containers have two forklift pockets incorporated into the floor scaffolding and can theref ...

Lifting device standing, pneum. Fabr. Bittler T3 FT, 6 Bar, Y.O.M. 92 to 2002 Stroke 800 mm, lifting force 350 kg, adjustable forks 600 mm, safety shutdown when lowering for lifting trolleys or containers when loading machines by hand, or when re-sorting

21-32-131 Electric - hydraulic U-lifting table NH HTF-U New equipment, made in Denmark. Lifting time: 18 secs. Loading and unloading by means of pallet truck. Items are lifted to an ergonomically correct working height. Remote controlled lifting/lowering with emergency stop. Consumption 0,75 kW. Capacity: 1000 kg. Voltage: 3 x 400 V. Minimal lifting height: 80 mm. Maximal lifting height: 780 mm. External dimensions: 1420 x 1140 mm. Internal free space: 585 mm. Lifting / lowing speed: 42 / 48 mm/s. Weight: 235 kg. Price: 1860 EUR Buy three or more – PRICE: 1695 EUR (EXW Jonava, Lithuania) Dear Customers, We invite you to visit our store Jonava. Currently used to present the largest exhibition of woodworking tools in the Baltic countries - your store have more than 300 installations. Our team is always ready to help you find the right equipment. JSC Medienos ...

Lifting device control MRC 2 220 - 240 VAC 50 Hz 3000 VA Lifting device control comes from operating resolution . Spare parts, filters, powder guns, wear parts in stock. Tel. 05242 / 43186 email info@pradler.com Filter cell Gema ITW 592 x 592 x 292 mm from operating resolution in stock Filter cartridge D = 327 x 605 mm for Wagner etc. in stock TS Residual filter D = 115 mm x 605 mm please enquiries / many pos. at the camp Mfg. Pradler Machine Service Tel. 05242 / 43186

Cheap used and new seeCONTAINER for sale in different versions! From current stock we can offer used and new sea containers for sale / leasing / rental: - 20ft (6m) Standard Box Container - 40ft (12m) Standard Box Container - 40ft (12m) High Cube Container - 45ft (13.7m) High Cube - 20ft (6m) office container - 20ft (6m) sanitary container Special Special versions such as Double Door, Flat or Open Top are always available at short notice. VISIT US Sightseeing is possible at any time and at short notice at our depot in DE-83395 Freilassing. For this we ask for a short telephone arrangement. KNOWLEDGE ABOUT SEECONTAINER Sea containers are extremely stable and are made of 2mm-sifted rust-coated Corten steel, which is also coated with saltwater-resistant ship paint. They have a reinforced forklift-passable floor, which is covered with 20mm waterproof plywood panels made  ...

Module formwork system EBAWE / Eilenburg we offer a used module formwork system (year 1996) The plants come from the assets of an insolvent paver of different concrete elements (ceiling, walls, garages and modules). Plant for the production of space modules in the basic sizes 6000 x 2400 mm, the height can be varied from 2,850 3.100 mm. Thus, the maximum floor height is 3,250 mm. Technical description: Taktfertigung manufactured space cells made of reinforced concrete with at least one open long side without soil in different sizes. Window and door openings, as well as large-scale breakthroughs can be provided. The system consists of the following components: 1.1 Module formwork for the production of space modules) -is the form of Chamber for the production of concrete item (space cell) -The two sides are at the stationary side walls arranged swivel -Vibrators are attached to all w ...

Manufacturer PWH Flow capacity 400 m3 hour of bulk material Grit 0 to 30 mm Bulk weight 0.84 to 0.90 to / m3 Water content 18% Heap height 12 meters Operating voltage 380 V Control voltage 220 V Bucket capacity: 100 litres • Number of shovels: 8 pieces • Bulk per minute: 60 • Theoretical power: 360 m3/h • Effective power: 280 m3/h • Bucket wheel diameter: 3.45 m • Circumferential force (wheel): 15,000 N • Cutting speed on the knife: 1.35 m/sec • Removal height (heap height): 12 m • Discharge of the lowered wheel: 11 m • Lifting height on the paddle wheel: 6 m • Lifting speed on the paddle wheel: approx. 3 m/min • Senovice speed on the paddle wheel: approx. 3m/min • Swivel speed: approx. 12 m/min • Angle of rotation of the trolley (suspension): 360 • Angle of rotation of the trolley

Control station Gema / ITW until the relocation of the plant 2009 the plant was maintained by ITW Gema, all units in the top state. 6 times unit static pistols 100 KV 2 times unit lifting device control for up to 4 pistols. Steering position and images to be followed by lifting devices as well as automatic pistols. If you have any questions, please, to the technology. In operation, handling .etc. of course I like to advise . Please send a short info to my AB with tel. I will contact you immediately . Mfg. Pradler Machine Service 05242 / 43186 Mobile 0171 / 4513691 email: info@pradler.com

Therapy bathtub, with hydromassage unit/device, stainless steel tub with various water jets, pump, with cold and hot water connection, patient lift, external size 1860x2500x960mm, inner dimension 1800x2340x570mm. New condition.

Cat-Nr. 09-2090 new cubic Standard Features: • Outer Dimensions: 1050 x 1050 mm • Height Body Tank: approx. 1550 mm • Height Tank incl. Feet: 2000 mm • Material AISI 304 – Material Thickness: Tank 1,5 mm / Feet 2,5 mm / Hooks for Transport 2,5 mm • Weight: 154 kg • Volume: 1500 Liter • Manhole on the Top 400 mm - Lid with 4 Screws and Clamps with Bunging NW 50 (as per Photo below) • Bottom in Symmetrical Shape • Outlet Discharge DN 65 • Reinforcement 150 mm in each Corner of the Tank • Surface: outside marbled – inside IIID • stackable – 3 in empty, 2 in full • transport possible with Hand-Lift or Fork-Lift Surcharges / unit (upon request): Butterfly Valve DN 65 Butterfly Valve DN 50 Closing Cap for Outlet Reducing Unit NW 65/40 or 65/50 For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-909052 ...

Cat.-Nr. 09-1025 new Standard Features: • Strong Frame Construction • Possible to use as Basis and Intermediate Storage • Movable with Low Lifting Elevating Truck Measurements and Weight: Total Height: 390 mm Width: 760 mm Length: 1250 mm Weight: 27 kg The price is for one barrel. For more Information please contact us under: Phone +49(0)9353-909050 Fax: 09353-9090522, Mobile: 0171-6518248 Subject to prior sale. All prices are valid Ex-Works, excl.VAT. Freight Charges: depending on dimensions and destination.

Tank- & Environmental Protection Wozniack Specialist company according to Section 19 water budget law Ladies and gentlemen, we offer a 5,000 litre double-walled storage tank for the storage of diesel, with a new diesel pump incl data acquisition. Rated capacity 5 cbm Piece 1 used but overhauled, i.e. the container is cleaned, reworked, primed and painted Colour equipment lacquer RAL ; However, you can also use your own colour wishes. Material steel in steel, material S235JRG2 Documents Manufacturer's/Test Certificate in accordance with DIN 6616 D/2 and Nameplate Piece 1 bearing rod Piece 1 Vent nozzle Piece 1 filling nozzle Piece 1 new limit sensor Piece 1 new leak detector with refilled leaking liquid Piece 1 ladder Piece 1 suction line Form of cylindrical storage container wi ...

Cauldron standing on 4 wheels Manufacturer: Appointed Serial No.: -. Year of construction: 1971 Volume: 150 LTR. Material: 1.4541 In the pressroom: Operating pressure: 5 bar Capacity: 20 LTR. Operating temperature: 158 ° C In the loading space: Content: 150 LTR. Operating temperature: 100 ° C Dimensions: Bowl ø: approx. 540 mm Interior height front: approx. 640 mm Interior height rear: 580 mm L x W x H: 700 x 700 x 1,100 mm (with wheels) Containers with heating jacket with sloping to the spout, tank outer shape rectangular, marbled at top: 1 hinged lid approx. 600 mm diameter with hinge and handle on the front: 1 temperature display 1 valve 1 " 1 spout DN 32 with shut-off valve at the back: Heating valve

- Hand & foot operation - integrated anvils - massive substructure - Hammer weight: 25 kg - Stroke: 250 rpm - Lifting height: 250 mm - Extension: 200 mm - Cylinder: 125 mm - Work shoehe: 765 mm - Engine power: 3 kW - Voltage: 400 V - Ground WxHxD: 460 x 1520 x 970 mm - Weight: approx. 670 kg

Diesel tank gas station tank plant. 30,000 litres capacity according to DIN 6616/D, above ground, double-walled including an officially recognised test certificate. Tank Environmental Protection Wozniack . Specialist establishment according to Section 19 of the Water Budget Act (WHG) offers as follows . Storage tank 30,000 liters double-walled used . The container is used, cleaned, overhauled and is equipped with the following fittings: 1 optical leak detector with type approval and leakage liquid (new) 1 filling pipe with TW closure (filling cap) and immerse tube, 1 bearing tube with bearing rod and bearing rod closure, 1 vent pipe with vent hood, 1 brand new limit sensor with type approval (AIII) (new) 1 ladder HDMeco 80 Diesel pump with tank data acquisition for 100 users Flow capacity max. 77 l/min PC software Windows, also Windows 7, USB interface incl ...

TOTAL LENGTH: 53798 MM, WIDTH: 10500 MM, HEIGHT: 10830 MM; CASSETTE INNER DIM.: 7500x1000x265 MM - L x W x H MAX. PROFILE LENGTH: 7500 MM, NO. OF CASSETTE PLACES: 294, DRVING SPEED: 100 M/MIN. LIFTING SPEED: 60 M/MIN.,

1 x Repiquet 2550mm wide x 820mm dia 4 roll inverted L Calender, Machine type: CALANDRE 4 CYL DE 820 x 2550, Machine no. 70-C9-87 Motorised nip adjustment, Peripherally drilled rolls, High pressure hot water hearing Bush bearings with flood lubrication, Hydraulic pre-loading to all rolls, Roll bending and unbending on roll 4, Cross axis on roll 3 and 1. Automatic bank sensors/control + camera system Traversing unit for roll buffing or sand blasting. 'Citroen' unidrive gearbox, type: SPECIAL, order no. 50491, Power 140/240 C.V. Speed 1500/2250, Output 46/59 with individual motor to each roll- Roll 1 and 4 - 130HP, Roll 2 and 3 - 240HP, Max calender speed 120m/min. Dual embossing station with approx 25 x embossing rolls (+ 5 x rubber pressure rollers) In very good condition.

Description Digital display (3 axis) Technical data: 1100 X 300 mm clamping surface Longitudinal stroke 700 mm Transverse stroke 250 mm Vertical lift 470 mm Spindle speeds 45-2000 RPM. Recording ISO 40 12 Milling feed longitudinal and transverse 18 800 mm / min. vertical 7.2 320 mm / min. The milling spindle 7 HP drive motor Drive motor of 1.5 HP table Machine weight 2050 kg