We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,376 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
This lot has been tested for function.
used
used
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095
used
- Flat steel shear cuts flat up to 100 x 18 mm - Knife length approx. 250 mm - Profile steel scissors cut angles 90° to 100 x 10 mm 45° to 70 x 8 mm - Bar steel shear cuts round steel 90° to 36 mm Square steel 90° to 30 mm - Notching device sheets up to 8 mm - Hole punch - Pressure capacity approx. 50 t - Projection 350 mm - punched in steel up to 20 mm Ø in 15 mm - Drive 400 V / 3 kW - Space requirement approx. W 1100 x H 1700 x D 2300 mm - Weight approx. 1900 kg
used
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095
used
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095
used
Rated power: 5.5 kVA; Rated current: 25 A; No load voltage: 243 V; Output current: 20-40 A; Rated output voltage: 96 V; Cyclic duration factor: 40%; Efficiency: 70%; Insulation grade: F; Protection grade: IP21; Arc-start: Contact; 6095
used
Capacity: Pipe Ø 160mm; width: 0-15mm; depth: 0-20mm; angle adjustment 30° - 60°;
used
Gasoline engine powered; Includes 3 grinding wheels
used
workpiece diameter: 110 mm grinding length: 410 mm clamping length: 20 mm total power requirement: 0,25 kW weight of the machine ca.: 500 kg dimensions of the machine ca.: m Profile Tool Grinder for Chamfer Angles, accessories The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Diameter: 0 mm Width: 0 mm Bore: mm Tangential head for gear hobber RS 2 - also available: Tangential head for gear hobber RS 00 ! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
equipped with Mettler Toledo scale, stainless steel housing
used
used
Max film width: ± 23 cm.
used
Equipped with digital reading
used
used
- technically efficient, ready to work – after full service - 6 spindles - automatic - variable angle lower spindles - spindle top 90 degrees
new
cutting range for steel to: 20,0 Trennschnitt mm cutting range for steel to: 15,0 Qualitätsschnitt mm capacity at 100%: 60 A cutting medium: Druckluft Air consumption: 160 lt/min. bei 5 bar l/min. range L-W-H: 480 x 540 x 920 mm weight: 75 kg Description: - Plasma gas: compressed air - Plasma torch with single connection - high frequency ignition - thermal overload protection - very robust and reliable design - The plasma cutting device JÄCKLE Plasma 60 shines with a very good Price-performance ratio. - This plasma cutter is the ideal system for craft, agriculture, Automotive industry etc ., Furnishing: - with burner model P 70/6 mtr. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
cutting range for steel to: 76 mm capacity at 100%: 51 mm cutting medium: 400 Amp regulated drive: 50-150 und 100 - 400 AmpSteuerSteuer control voltage: 24 Volt weight of the machine ca.: 750 kg dimensions of the machine ca.: 82 x 122 x 930 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max. cable/ tubing diameter: 76.2/ 9,5mm, diameter: 23,200/h.
used
An Eicon roll cutter, used in profile production, is available.
used
Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.
used
Connected load: 1.5kW, including documentation.
used
Diameter: 360 mm Width: 120 mm Bore: nicht schwenkbar mm milling head: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max. piece dimensions: 250x240mm, connected load: 5.8kW, length: 1925mm, width: 950mm, height: 1420mm, weight: 450kg, including documentation, display is defective.
used
Max. working width: 2000mm, min. cutting width: 10mm, core diameter: 76/ 152mm, circular knife diameter: 100mm, max. wall thickness: 10mm, with documentation, the machine was hardly used.
used
Format: 320-640x320-860mm, weight: 7t.
used
Sheet format: 2000x1200mm, suitable for solid board, corrugated board and other materials.
used
Sheet format: 890x1180mm, inner frame width: 820x1120mm, pressing force: 300t, motor power: 4kW, length: 1800mm, width: 2100mm, weight: 4.3t.
used
Working area: 1980x3200x65mm, outfeed belt width: 3000mm, vacuum pump power: 18kW, operating system: Windows 10, software: Cuttec GNE with import and export of DXF files, optionally available is a Link Conveyor CTGF, dimensions: 6000x2000mm, controllable from the cutter and foot switch, including film unwinder with sensor control, multi layer plates, vacuum pump with integrated filter and two integrated hollow drilling devices.
used
Max. punching force: 400t, output: 6000 sheets/h, format: 600x520-1600x1100mm, including Feeder Easyloader, Panel Seperator Pallmac and documentation, without spare parts, the machine can only used outside the EU.
used
Cutting force: 200kN, working width: 2500mm, cylinder width: 2600mm, cylinder diameter: 400mm, opening between the cylinders: 25-100mm, conveying speed: 11-44m/min, connected load: 7.5kW, weight: 3t, with documentation.
used
Max. working width: 1200mm, clear span: 70-150mm, table dimensions: 1700x1400mm, working height: 850mm, roll diameter: 250mm, connected load: 2.2kW, weight: 800kg.
used
min./max. format: 700mm x 500mm/1420mm x 1020mm, throughput: 4500 sheets/h, max. punching force: 600t. Working materials: paper from 90 g/m2, cardboard up to 1.5mm thick, corrugated cardboard up to 4 mm thick. Dimensions X/Y/: 9900mm/2350mm, weight: 25500kg. Documentation available. On-site inspection is possible.
used
HEIDELBERG Nela plate punch Suitable for HD SM 52 / 74 /102 and XL machines Hole spacing: 425 mm and 780 mm Various year of manufacture models available
used
SPECIFICATIONS: Single chain Vertical machining Table enviable Equipped for the processing of doors.
used
Guillotine Ideal Model 4810A Year 1989 Cutting length 475 mm Details Manual adjustable clamp Electric cutting Manual backgauge adjustment Ruler read/out 2 new knives, 1 used single phase, 240 volts
used
Type: W/ARW 2200/12 Flying Splice Comm. 2011-001.1 Working width: 2200 mm Finished roll weight max. 2000 kg Finished roll diameter max. 2x 1200 mm Finished roll width min. 800 mm; max. 2200 mm Material Paper/ Foils 75 μm – 1000 μm Machine speed max. 1500 m/min Depending on the type of material and material thickness achievable Web tension: max. 1000 N Finished roll sleeves: inside 152.4 mm outside 162.4 mm - Type of cardboard sleeve, plastic - Sleeve tolerance according to DIN 6748 or 55470 Unwinding: Type ARW 2200/12 Unwinding: axisless 2 x 1200 mm; sleeve holder 6" L.W. (other dimensions with additional accessories possible) Sleeve holder: 6" L.W. (other dimensions with additional accessories possible) Pulleys: DM approx. 150 mm Brake: Generator brake with energy recirculation, control via ultrasonic sensor Path control: Edge control E&L with ultrasonic sens ...
used
Microcut/ continuous cutter, colloid mill. High-performance machine for use in continuously operating process lines. Product - Mounting funnel: capacity 30 liters completely in V2A Nirosta stainless steel, 3 different perforated discs - inserts and 5 sets - knife blades
new
for frozen meat blocks
used
Very high quality cone cutter from Makita 55013 Ready to use Beam height up to 400 mm Range up to 240 mm Cone racks 0 to 130 mm Cone length maximum 340 mm Motor power 2.2 Kw lateral adjustment range 45/20 mm Dimensions 100cm x 64cm 110 (length-width-height) Weight approx.120 Kg For head houses the workpiece is clamped schraeg
used
REF-1681 SACCARDO ARTURO CHOP CUTTER Completely made of stainless steel. Manufacturer: SACCARDO ARTURO Model: TITANIO 2. Max. cutting length: 1.070mm. Max. cutting section: 210x240mm. Cuts per minute: 90-180 Cutting thickness: 5-60mm Weight: 330 kg. Year: 2008 3kW Dimensions of the machine: 2,367mm x 832mm; h: 1,496mm
used
Ruck Zuck Dough Cutter Cake Cutter/14 wheels/smooth/wavy? Product? New, unused? Brand: Schneider? Material: stainless steel? Version: 14 wheels: 7 wheels smooth and 7 wheels serrated The cutting width is flexibly adjustable and can be fixed so that you always achieve the same cutting width. Wheel diameter: 5.5 cm? Cutting width: 1 - 12.5 cm See pictures for details
used
Business card modul Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Machine checked and cleaned
new
– Capacity 50 tons – Hydraulic – 4 stations – Foot control – Electric backgauge - Emergency stop Ebhzaoz – With 10 stamps (8, 10, 12, 14, 16, 18, 20, 22, 24, 26 mm) – Peddinghaus punching recording – Documentation – 400 V
used
Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Business card 55 mm module
used
Vibrator PROFILINE RLA-H.7S, max. format 1220 x 1640 mm with spread roller and pneumatic push-out to the rear, Auto. Rear table assembly with plier transport system AM 1220x1640 mm High-speed cutter SCHNEIDER SENATOR 185 SC-Video Cutting width max. 1850 mm Stacker ABS 145-7B , max. format: 1220 x 1640, max. stack height 1450 mm Footprint approx. 8 x 8 m
used
Paper size : 210 x 210 mm – 370 x 650 mm Paper weight : 110-350 gms Speed : 1560 sheets/hour Power supply : 230V – 50/60Hz Business card 55 mm module Machine checked and cleaned in working conditions.
used
Chain milling machine VEB Type KFM Motor power 2.2 kW Table tiltable 30° -0°- 30°, height adjustable, adjustable to left-right Pressure from the front Sword 50 x 150 for chain 12 – 17 mm Dimensions 1100 mm x 1000 mm x H 1620 mm Weight with pallet 511 kg
new
CNC milling machine ZX7124F table 900x230mm new/unused Description Was intended for project, but was never used. Private sale without warranty. Pick-up only: Mobile phone 015121271265 Table size 900 mm×230 mm T slot number spacing 3×14 mm The biggest hole diameter Ф20 mm End mill diameter Ф20 mm Spindle allowed maximum 150N.m Spindle speed 20~6000rpm The spindle taper BT30 The spindle end face to the 80~480 mm Spindle center distance to 300 mm The motor power 2.2KW Moving range (X, Y, Z) 500×280×400(mm) 12 Fast moving speed (X, Y, Z) 6000×6000×6000(m/min) Repeat positioning accuracy ±0.02 mm The feed motor power (X, Y, 4×4×7(N.m) Cooling pump motor power 0.09KW The power supply voltage 380V、50HZ The weight of the 1400 kg The environmental 0°C ~45°C