bourg cp bourg used for sale

PLC control, CPU module, central processing unit -Manufacturer: SIEMENS -Type: Simatic S5 6ES5 942-7UA11 -Number: 1x module available -Dimensions: 45/195/H300 mm -Weight: 1.1kg

PLC control, CPU, main memory, CPU, central unit -Manufacturer: Siemens, central device Central Controller Simatic -Type: Simatic S5 101U 6ES5 101-8UA13 -Dimensions: 260/115/H165 mm -Weight: 2.9 kg

PLC control, central module, main memory, CPU, central device, central processing unit, compact device, compact CPU -Manufacturer: Siemens, compact CPU Simatic S7-300 -Type: 6ES7 313-5BF03-OABO -Number: 1x module available -Price per piece -Dimensions: 120/115/H125 mm -Weight: 0.8 kg/pc.

Central processing unit, control, switchgear, CPU, SPS, SPS control -Manufacturer: Mitsubishi, SPS control from tray sealing machine Inauen VC999/ TS 1200 N -Type: FX2n-48MR-DS -Total dimensions: 295/90/H83 mm -Weight: 1.3 kg

PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit, compact CPU -Manufacturer: Siemens, Central processing unit CPU 315-2 Simatic S7-300 -Type: 6ES7 315-2AF03-0AB0 -Quantity: 1 module available -Dimensions: 120/80/H125 mm -Weight: 0.5 kg

Electronic Module, CPU Module GE FANUC CPU Module 25 MHz ( CPUModule25MHz ) IC693CPU315-GN CPU 351 4200547 New ! Dimensions: 160 x 160 x 80 mm

Clocked power supply, electronic module KNIEL CPM 100/VME ( CPM100/VME ) 330-049-04 input: 110 / 220 V AC 45 - 440 Hz output: 5 V DC 12 A 2 x 12 V DC 2.0 A used, tested ! Dimensions: 190 x 70 x 130 mm

Valve terminal with fieldbus connection FESTO CPV 14-GE-MP4 CPV-14-VI 4 valves HN02 123622 18210 161362 -0.9 - 10 bar Dimensions: 140 x 135 x 105 mm

PLC control, central assembly, RAM, CPU, central device, central processing unit, compact device, compact CPU, central processing unit -Manufacturer: Schleicher, Master CPU Central Processing Unit -Type: UCN 31306786 -Quantity: 1x module available -Dimensions: 150/35/H200 mm -Weight: 0.6 kg

Valve terminal with fieldbus connection FESTO CPV 14-GE-FB-4 CPV-14-VI 2 valves H902 123788 18210 161362 -0.9 - 10 bar Dimensions: 130 x 125 x 95 mm

Valve terminal with fieldbus connection FESTO CPV 10-GE-MP-6 CPV-10-VI2549 5 valves L902 18254 18200 161416 -0.9 - 10 bar Dimensions: 155 x 140 x 80 mm

Valve terminal with fieldbus connection FESTO CPV 14-GE-MP-8 CPV-14-VI 8 valves HN02 123624 18210 161362 -0.9 - 10 bar Dimensions: 185 x 140 x 95 mm

Valve terminal with fieldbus connection FESTO CPV 14-GE-FB-8 CPV-14-VI 7 Valves HN02 123790 18210 161362 -0.9 - 10 bar Dimensions: 185 x 125 x 95 mm

Directional Control Valve, Pneumatic Valve FESTO Type: CPE14-M1BH-5/3GS-QS-8 Series: S402 196906 0.9 - 10 bar 24 V Dimensions: 150 x 100 x 15 mm

Directional Control Valve, Pneumatic Valve FESTO Type: CPE14-M1BH-5/3ES-QS-8 Series: S402 196902 0.9 - 10 bar 24 V Dimensions: 150 x 100 x 15 mm

PLC controller, central assembly, working memory, CPU, central unit, central processing unit, compact unit, compact CPU -Manufacturer: Siemens, Compact device CPU 214 -Type: 6ES7214-1AC01-0XB0 /6ES7 214-1AC01-0XB0 -Quantity: 1 module available -Dimensions: 200/80/H65 mm -Weight: 0.4 kg

Directional Control Valve, Pneumatic Valve FESTO Type: CPE14-M1BH-5/3GS-1/8 Series: U402 196938 0.9 - 10 bar 24 V Dimensions: 150 x 100 x 15 mm

Valve terminal FESTO 3x CPV14-M1H-2X3-GLS-1/8 5x CPV14-RZP 1x CPV14-GE-MP-8 161362 162550 18265 Dimensions: 190 x 150 x 100 mm

Valve terminal FESTO 6x CPV14-M1H-5LS-1/8 2x CPV14-M1H-2X3-GLS-1/8 1x CPV14-GE-MP-8 161360 161362 18265 Dimensions: 190 x 150 x 100 mm

Valve terminal FESTO 7x CPV14-M1H-2X3-GLS-1/8 1x CPV14-M1H-5LS-1/8 1x CPV14-GE-MP-8 161362 161360 18265 used, tested ! Dimensions: 190 x 150 x 100 mm

Auction-ID: A1-43429-206

-No documents -Side shift -New Auction-ID: A3-43525-30076

Auction-ID: A1-46529-2504

Valve terminal FESTO 2x CPV14-M1H-2X3-GLS-1/8 1x CPV14-M1H-5LS-1/8 1x CPV14-RZP 1xCPV14-GE-MP-4 161362 161360 162550 18210 New !' Dimensions: 100 x 125 x 100 mm

Centrifugal pump with coupling, water pump KSB CPK-Gm32-160 Q = 166 l/s H = 38.5 m n = 2900 rpm shaft Ø 24 mm Dimensions: 480 x 300 x 290 mm

Concrete scarifier EDCO CPL8-1.75 220v motor Works perfectly Auction-ID: A1-45887-206

Auction-ID: A1-46694-1701

With documents and compliance Auction-ID: A1-46614-112

Used master can filling machine 23000 CPHTechnical Specifications & Performance DataThis rotary can filling machine is engineered for carbonated soft drink applications and high-speed beverage production. With a robust rotary carousel and precise isobaric filling technology, it supports multiple aluminum can formats while maintaining excellent product integrity and carbonation retention. Manufactured by Tecno-Food Group, the Master Can configuration delivers reliable output for second hand and used bottling line projects in industrial packaging.Filling technology: Isobaric for carbonated beveragesNo. of valves: 50Series: 50Carousel pitch: 113 mmCarousel diameter: 1800 mmRotation: CounterclockwiseBase format speed: 23,000 can/h (0.5L)Maximum speed: 28,000 can/h (0.33L)Compatible formats: 0.33L, 0.5L cansFilling temperature: 18 °CCO2 content specification: 8Installed power: 20 kWMain po ...

JWell cast film line 160cm widht CPE CPP microembossed cast film line 15-100 gram m2 CPP, CPE embossed film line

Used Operator Panel OP 15-A1 6AV3515-1EB30-1AA0 Tested

Can filling line CFT capacity: 12.000 cph year of manufacturing: 2017 can size: 150 ml Slim line / 200 ml Slim line / 330 ml Standard lid size: 200 and 202 filling products: carbonated water and drinks consisting of: 1. Can depalletizer CFT type 101 2. Can filler type: Master-Can Tronic RS24/4 with 24 filling valves 3. Can seamer CFT 3000/4 with 4 seaming heads 4. Wrap around can packer SMI to pack 2x2 and 2x3 cans 5. Can tray shrink packer SMI to pack 4x3 cans 6. Stretch wrapper (semi automatic)

PLC control, central module, RAM, CPU, central device, central unit, compact device, compact CPU -Manufacturer: Siemens, compact device CPU 224 Simatic S7-200 / digital I/O EM 223 -Type: 6ES7214-1BD23-0XB0 / 6ES7 223-1BF22-0XA0 -Individual components: see photos -Number: 4x module available -Price: per piece -Dimensions: 170/90/H60 mm -Weight: 0.5 kg/piece

Small compactor / crimping device CPD 1.1, Limbacher Maschinenbau GmbH, nameplate not found, (predecessor of container packer CP 1.100)

Mention : PLEASE NOTE ! Unchecked products .Unknown operation ! All itmes are sold as is . No complaints or claims will be accepted after purchase. The buyer is invited to view the lots before auction day ! Auction-ID: A7-46458-1038

Screw compressor CPA 10/10 DX 270, 1000 l/min, 10 bar Year of manufacture 2021 little run Features: Low-noise, complete & compact Designed for high performance, efficiency and reliability, this system is ideal for any workshop The extremely low noise level allows installation even without a separate compressor room The integrated dryer enables problem-free painting and sandblasting work. But even the usual air tools thank water-poor air with a considerably longer shelf life. The system is extremely easy to operate and maintain. Technical data: Type: CPA 10 DX Motor power: 7.5 kW/400 V Delivery rate: 1000 l/min Operating pressure: 10 bar Boiler volume: 270 l Refrigeration dryer: integrated Noise level: 66 db(A) Integrated star-delta switch Weight: 341 kg Length: 1200 mm (to the right there is space for the intake) Depth: 670 mm (space must be provided for suction at the rear) Height: 18 ...

Oil Heat Exchanger Refrigerant: R407C Cooling Capacity: 3.141W incl. connection cable 16A and hoses Transport dimensions: 800 x 600 x 1,200 mm, approx. 100 kg Auction-ID: A7-46660-124

Voltage 220V; max current 4 A; Vibration: 6000/min; Adjustment by potentiometer Serial: CM010585 Estimated weight: 50 kg Approximate dimensions: 500x500x1450 mm Auction-ID: A7-46655-45

Revised in 2018 With piece counting table, up to 3 kg capacity. With floor platform, up to 1500 kg capacity, with digital display Weighing ground plane dimensions approx.: 1125 × 1500 mm useful Counting table dimensions: 270 × 290 mm Article available from July/September. Auction-ID: A7-46538-36

Oil Heat Exchanger Refrigerant: R407C Cooling Capacity: 3.141W incl. connection cable 16A and hoses Transport dimensions: 800 x 600 x 1,200 mm, approx. 100 kg Auction-ID: A7-46660-125

Unaudited Good condition Auction-ID: A7-46327-148

60V,300a battery pack. With 230v charger. White belts non marking Auction-ID: A1-42017-130

Cummins diesel engine Auction-ID: A1-40252-10

Equipped with: Miedema CP42 3P 75H, year of construction: 2014, 4x 75cm, powder + granulate, ridging hoods, running wheels, yellow leg cups, fixed bunker, LED lamps, hydraulic tipping bunker (capacity approx. 1850-2050 kg) please note! Main beam is torn! Auction-ID: A1-40138-30

60V,300a battery pack. With 230v charger. White belts non marking Auction-ID: A1-42017-129

Technical Specifications & Performance Data This Divider Inserter by OMA is engineered for reliable insertion of cardboard partitions into cases at high efficiency. Built in 2010, it offers robust performance for industrial packaging and beverage production, making it a strong addition to any used bottling line or second hand packaging setup seeking improved product protection during transport. Manufacturer: OMA Model: INS ALV Year: 2010 Production speed: approximately 1200 cases/hour Case formats: 6-bottle and 12-bottle cases Head configuration: single-head Included equipment: vibratory belt/conveyor for partition handling Electrical supply: 230 V, 50 Hz Installed power: 1 kW Weight: 1000 kg Marking: CE Advanced Automation & Control Systems The machine is equipped with a dual-sided control interface, featuring a redundant keypad on both sides of the frame to improve operability and acce ...

Used KHS Innofill can line 16000 CPH - year 2018Technical Specifications & Performance DataThis complete used bottling line is a second hand beverage canning system engineered around a KHS can filler block, integrated with high-quality upstream and downstream packaging machinery. Designed for industrial packaging and beverage production, it delivers reliable performance for aluminum cans.Production speed: up to 16000 cph (cans per hour)Primary filler: KHS Innofill Can C (2018)Can seamer: Ferrum FC03 (2018)Depalletizer: SKA Fabricating Can-I-BusInspector: Heuft fill level detectorRinser: AV-C500 can air rinserDryer: Air Control Industries can dryerLabeller: Pack Leader (Advanced Dynamics system)Case packer: Atlanta Rafaello 726Case coding: SATO S86-EX printerConveyors: KHS and AE Conveyors, plus KBR outfeed belt conveyor with PCUtilities/auxiliaries: Conveyor lubricator (Loewados)Containe ...

Used filling line CFT for cans up to 10800 cph The used CFT filling line for cans up to 10,800 cph represents indeed a reliable and efficient solution for industrial bottling operations. Equipped with specialized and high-quality equipment, this line is meticulously designed to maximize productivity and ensure in fact optimal results. CFT Empty Can Twist Rinser- Water Rinse of the CFT Canning Line The CFT empty can twist rinser with water rinse provides thorough cleaning of empty cans. Moreover, with its dual can rinser system and spare parts sets for 0.35L and 0.47L aluminum cans, it ensures flexible operation tailored to specific production needs. Additionally, the rinse process guarantees pristine can surfaces, vital for maintaining product integrity. CFT 20 Valve Can Filler – Seamer of the Used filling line CFT for cans up to 10800 cph The 2013 model RS20 CFT 20-valve can fille ...

New Can Sealer 60 heads 30.000 cph Available with : 70 HEADS Production per hour: 45.000 90 HEADS Production per hour cans: 60.000 1 – ADVANTAGE OF THE SYSTEM Guarantees the hygiene of the can both in upper and lateral part. Applied ‘dry’ without the use of glue or heat. Allows to the final user to drink directly from the can. Improves the qualitative image of the product. Permits the usual stacking of the cans. Guarantees watertightness for immersion. Suitable also for warm distributors (60°C). Compatible with the traditional Multipack systems Decoration and customization is possible for marketing and promotional purposes. Adds a possible advertising space on the product 2 – MACHINE DESCRIPTION Automatic machine for the application of a polyethylene stretch film on the cans The machine inferior structure and external walls of the machines base are constructed co ...

Used KHS Beer can line - 48.000 CPHTechnical Specifications & Performance DataThis KHS complete beer can bottling line is engineered for high-speed beverage production and industrial packaging performance. It is a second hand, used bottling line configured for aluminum cans with robust components across depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The line delivers consistent throughput and quality suitable for large-scale beverage production.Production speed: up to 48,000 cans per hour at 0.5L; 41,000 cans per hour at 0.568LContainer types: Aluminum cansFormats: Compatible with 0.5L, 0.568L can formatsCan dimensions: Diameter 66.30 mm; Height 168 mmLid specifications: Aluminum; Diameter 59.44 mm; Height 2.07 mmFilling technology: Volumetric pressure filling with MID (magnetic inductive flow meters)Seaming technology: High-speed multi-head can  ...