bottom used for sale

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 95 mm -Dimensions: see photo technical drawing -Dimensions: 109/57/H157 mm -Weight: 1.2 kg

SOS Block bottom bag machine 2 plies photo cell for preprinted paper 4 colour tail end printer bottom patch and 1 colour tail end printer for bottom patch Bag width: 16-32 cm Tube length: 24-90 cm Bottom width: 7-18 cm

SOS block bottom bag machine 2 plies 4 colour tail end printer photo cell for preprinted paper Bag width: 12-26 cm Tube length: 25-47 cm Bottom width: 4-12 cm

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 179 mm -Dimensions: see photo technical drawing -Number: 3x clamps available -Price: per piece -Dimensions: 205/80/H155 mm -Weight: 5.0 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 166/57/H115 mm -Weight: 1.7 kg/pc.

P119 - used approx. 28.8 m³ / 28,800 litres GF-UP tank / plastic tank, double-walled, flat bottom tank, in good condition. technical details: capacity: approx. 28.8 m³ / 28,800 litres material: double-walled GF-UP tank manufacturer: Formoplast dimensions: Ø approx. 3.0 m x total height approx. 4.5 m certification mark: PA-VI 312.002 (DIBT examination report not available) specific weight: 1.4 kg / L Used storage tank in good condition. The hull will be newly painted in dark green. Double-walled flat bottom tank, aboveground storage tank with various connections such as ventilation, feed, etc., lid on the roof. According to the age, traces of use are present. For media with a specific weight of up to 1.4 kg/L, the tank formerly contained iron(II) chloride. This container can be used as a storage tank for liquid feed, water, whey and many different media. Pric ...

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 167 mm -Dimensions: see photo technical drawing -Dimensions: 190/60/H135 mm -Weight: 3.4 kg

2 plies, 4 colours Bag width: 5-12 cm Tube length: 12-34 cm Bottom width: 3-7,5 cm

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 142 mm -Dimensions: see photo technical drawing -Dimensions: 165/70/H125 mm -Weight: 2.5 kg

- Atmospheric pressure - Tanks for the fermentation and storage of wine or beer - Dome 400 mm stainless steel AISI 304 - Nitrogen connection with stainless steel ball valve 3/8" - Cleaning pipe with DIN 32 connection - Cleaning ball Ø 65 mm AISI 316 stainless steel - Level indicator with return flow into the tank - Taster - Bottom conical 30° - Residual drain butterfly valve DIN 25 - Clear drain butterfly valve DIN 25 - Bimetal thermometer in stainless steel -20 °C/+80 °C with 200 mm long shaft - 3 adjustable stainless steel feet - Dimensions: Ø 800 x 1950 mm (h) - Mirror polished inside, marbled outside

Valve sack bottomer, type Progress 525, Gartemann & Hollmann, with rotary feeder, valve station, bottom patch station with 1 colour printers each side, Tube width 32-60 cm, Tube length 68-134 cm, Bottom width 7-15,5 cm, machine mounted

SOS Block bottom bag machine TRIUMPH I, 1 ply, 4 colours, photo cell, Tube width 3-7,5 cm, Tube length 12-34 cm, Bottom width 5-12 cm, machine ready for test production

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 148 mm -Dimensions: see photo technical drawing -Dimensions: 190/67/H45 mm -Weight: 2.0 kg

lunette, steady rest, lynette -Clamping tool: clamping bracket -Clamping width: 143 mm -Dimensions: see photo technical drawing -Number: 2x clamps available -Price: per piece -Dimensions: 170/60/H140 mm -Weight: 2.0 kg/piece

Marel concept 500 labelling machine, - top and bottom labelling machine

Rotary feeder, 1 valve station, bottom patch with 2 color tail end printers, pressing and packeting station

Welding Width: 900 mm // Bag Length (Max): 10000 mm

Completely closed PP-Tank

Top and bottom wide belt sander SAC mod. 4R 300 - CE rules - Working width mm. 300 - Max. working height mm. 150 - Min. height mm. 5 - Min. piece lenght mm. 240 mm. - N. 2 top rollers -. diam. 254 mm. - N. 1 top brush - N. 2 bottom rollers - diam. 254 mm. - N. 1 bottom brush - Feeding speed 4-16 m/min. - N. 4 motors kw 4 each - Volt 400/50 - S/N AA0985 - Year 2001

Material Name: Oven Bottom Center Cover Material Brand: Generic Model: NIL Material Type: 2997mm Material Specification: 2997mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

Material Name: Oven Bottom Panel 2000mm x 1130mm Material Brand: Generic Model: NIL Material Type: 2000mm x 1130mm Material Specification: 2000mm x 1130mm PLEASE CONTACT AARON : +6017-369 8203 LOCATION: F42

machine overhauled, rotary feeder, one valve station, bottom capping strip with 2 color tail end printers, packeting station, Tube width: 30-70 cm, Tube length 48-140 cm, bottom width 7-16 cm

Equipment: Agitator,Manufacturer: Behälter KG,Condition: used,Volume: 5,000,Bottom floor: Flat bottom,Design: standing,Stand shape: Frame,Diameter inside: 1,440,Cylindrical height: 3,000,Total height: 3,500,Manhole / dome: in cylinder,Type plate: Yes,Outlet : 80,Note: slight adhesions,Remarks: Frame made of V2A (at the moment 4 wooden blocks are screwed underneath see photos) Manhole approx. 345 x 440 mm,Material in contact with the product: V2A 1.4301 (AISI304), Agitator: Agitator Flange,Bottom Bearing: No,Current Interferer: Yes,Agitator Arrangement: Center in Topsoil,Bottom Bearing: No,Current Interferer: No

Manufacturer: Schwarz Apparate- und Behälterbau,Condition: used,Volume: 4,000,Lower bottom: flat bottom,Top bottom: screwed lid with hinged segment,Design: upright,Diameter inside: 1,590,Cylindrical height: 2,000,Total height: 2,200,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 1.5,Type plate: Yes,Outlet: available,Outlet : 48,Note: slight adhesions,Remarks: Tanks slightly out of round Spout is deeper than tank bottom (note when setting up) Sheet metal cut-outs in the lid Type plate only available for 2 tanks 1 tank with ball valve (see

200 hL – Selip – Fiberglass tank with curved bottom on legs SELIP brand fiberglass storage tank, capacity 200 hl, closed cylindrical type. Designed for storage in the wine and agri-food environment, it combines a large capacity, easy access (chimney + oval door) and stainless steel pumping/emptying devices for simple and efficient operation in the cellar. Technical characteristics Closed cylindrical tank Brand: SELIP Total capacity: 20,000 litres Material: fibreglass Roof 1 offset front din DN inside 390 mm and DN outside 580 mm Ferrule 1 stainless steel taster tap 1 full level 1 oval door 460 X 340 mm 1 partial drain valve, reed, DN 70, stainless steel on square flange 100 X 100 mm Domed bottom 1 total drain valve, with flap, DN 70, stainless steel on square flange 100 X 100 mm 4 feet of 500 mm Dimensions Diameter: 2200 mm Height of the ferrule: 5800 mm Total height: 68 ...

Condition: factory new,Volume: 105,000,Specific gravity of the medium: 1,250,Lower bottom: flat bottom,Top bottom: conical bottom,Design: upright,Diameter outside: 3,342,Cylindrical height: 12,000,Total height: 12,500,Wall thickness underbody: 3,Wall thickness cylinder: 3,Wall thickness upper floor: 2,Technical documents: Drawing,Manhole / dome: in cylinder,Type plate: Yes,Equipment: Ventilation/vent, disc valve,Outlet: DN80 DIN 11851 ,Remarks: Pictures shown are of an identical tank with slightly smaller volume,material in contact with the product: V4A 1.4401/04 (AISI316),material feet:

120 hL – Ruralinox – 304 stainless steel tank conical bottom on legs This RURALINOX stainless steel storage tank with a capacity of 120 hL is designed for the storage of liquids in the wine and agri-food environment. Its configuration, combined with a conical bottom on legs, a closed conical roof and simple racking and control equipment, makes it a robust second-hand solution that can be used immediately to complete a winery or increase an existing storage capacity. Technical characteristics Vertical cylindrical tank closed on legs Brand: RURALINOX Capacity: 12.000 litres Material: stainless steel Roof Conical roof 1 chimney chimney DN 500 mm with stainless steel hatch and 1 chimney tap Lifting rings Ferrule 1 door bar 1 rectangular door 530 x 420 mm external opening1 tap and level strip 1 taster tap 1 stainless steel partial drain valve on square flange with DN 40 Mâcon va ...

For sale is a used stainless steel tank from the German manufacturer Möschle Apparate- & Behälterbau with a useful volume of 22,000 liters., The tank was in the year 2012 manufactured and made of stainless steel 1.4301 / 1.4307Due to its hygienic design, it is suitable for numerous applications in the food, beverage, as well as pharmaceutical and chemical industries., The container has a conical base for the thorough residual draining as well as about a floor mixer of the manufacturer Stelzer. Installed is a Stelzer Hermet 2060 with a motor power of 5,5 kW and a speed of 915 min⁻¹Thereby the tank is suitable not only as a storage container but also as a process and buffer tank for liquid to moderately viscous products., The equipment also includes an oval manhole, a fixed spray ball for CIP cleaning, and a continuous railing., The tank is out of service, already separated from the e ...

CIP tank. Volume 2x 5.000 liter (1x compartment of 10.000 liter dividend in 2x compartments). Pressure in the tank: ATM. Aearator on top of the tank. Manholes on the side (oval 450 x 300 mm) and on the top (400 mm diameter) of the tank (1x for each compartment). CIP bowls for cleaning inside the tank. 3 Stainless steel legs. Outlet in the bottom, 110 mm height. Cylindrical height: 3.000 mm. Total dimensions: Ø 2.300 x 4.100 mm. The tank has a lot of lime on the inside., Additional features:, Tank already dismantled out of the factory and located in an outside warehouse in France., Has been a set of 3x tanks, stocknumber: #911 / #912 / #913., Type of Machine: CIP Tank, Volume: 2x 5.000 liter, Double jacketed: No, Insulation: No, Material: SS 304, Type of agitator: No agitator, CIP Spray bowls: Yes, Manhole: Yes 2x pieces, one in each compartment, Number of feet: 3, Internal height: 3.000 ...

vertical stainless steel tanks with insulation and cladding, most recently used as storage tanks for degassed water, Additional title: vertical, insulated stainless steel tanks, Gross volume each: 14340 l, Material: stainless steel, Position: each standing on 3 feet, Base construction: cylindrical frames, Features: outlet pipe with manual valve; overflow pipe ladder bracket; manhole

250 hL – Chalvignac – 304 stainless steel tank with flat bottom with 3% slopeThis CHALVIGNAC stainless steel tank with a capacity of 250 hL is designed for the storage of liquids. Its configuration, combined with a vertical cylindrical tank with a sloping flat bottom, a vertical rectangular door with external opening and a complete racking and control equipment, makes it a robust and immediately usable second-hand solution to supplement an existing storage capacity. Technical data Brand: CHALVIGNAC Total capacity: 25,000 litres Roof 1 chimney centred with lever hatch DN 500 mm anti-retention with 4 studs 1 neutral GAS tap with 33 x 42 nozzle and plug 2 lifting rings Folded U-shaped gangway support 80 x 40 x 2.5 Ferrrule 1 ladder support bar1 rectangular door 410 x 530 with external opening with closing fin and mud flap 1 tap and SIM level strip without return with graduation ...