bottles line used for sale

Engine defective, no compression, cause unknown Auction-ID: A1-42014-171

Lightly used, fully functional paving stone production equipment Year of manufacture: 2019 Power source: 400 V AC / 50 Hz / 3 PH Main breaker: 400 A Hydraulic pressure: 170 bar / 2465.65 PSI Pneumatic pressure: 6 bar / 87.02 PSI Power: 160 kW Highest manufacturable product height: 250 mm Required installation area (base area): approx. 32 × 18 m Required ceiling height: 8 m Capacity, Production per cycle: approx. 1.2 m² paving stone approx. 2.1 m² rustic stone (semi-finished) Production rate: approx. 1800 cycles per 8-hour shift 5 colors can be dispensed can be viewed under power for disassembly the manufacturer can give a quote For viewing or further questions Contact:  Email: gabor.racz@surplex.com Mobile:+36304509673 Auction-ID: A7-45970-1

8 pieces Dekolight Linear 100 Article 707016 See datasheet 4000K - without rails, without connectors - - Figure shows assembly example - Auction-ID: A1-45889-358

2 SAT antennas 1 x Grundig approx. 1 m diameter 1 x WISI Orbit line 36 in original packaging Auction-ID: A1-45889-2685

X-axis: 2500mm Y-axis: 920mm Z-axis: 820mm Machine is equipped with: - chip conveyor - through spindle coolant 40 bar - coolant filtration system - 30 position ATC Auction-ID: A1-45752-5

10 pieces Dekolight Linear 100 Article 707016 See data 4000K - without rails, without connectors - - Figure shows assembly example - Auction-ID: A1-45889-360

serial number - 213916-1701-0262 connections - 6bar/400V/5-Hz/400VA version - 6.10 Auction-ID: A7-45917-6

CNC VERTICAL MACHINING CENTRE Inv. No. 13.212M1 Make KEARNEY & TRECKER MILWAUKEE Model MODU-LINE Control Siemens 840D Mach. No. 27897 Table size 1.879 x 1.016 mm X-travel (longitudinal) 1.830 mm Y-travel (cross) 762 mm Z-travel (vertical) 762 mm Workpiece weight 6.800 kg R.P.M. 4 – 2.400 HP 25 Volts 400 Cycles 50 Including: Automatic Tool Changer Built in rotary table Ø 813 mm Auction-ID: A1-45737-190

Disposable PET filling line consisting of the following components: - Crate ejector (crate emptier, Gera GmbH, 20 ejectors in a 4x5 arrangement) for 0.5-litre bottles - Crate ejector for 1.0-litre bottles (Gera, 2003) - Case washer with cleaning nozzles - Stretch blow moulding machine (SIG, type Blomax 18, built in 2003, with 18 cavities) - Air conveyor for PET bottles (Convair, 2001) - Suction system (2003) - Air transport (KHS Innoline, 2003) - Premix system (Procomac Starmix CM, built in 2001, 250 hl/h) consisting of water degassing, mixer and carbonation with a total of 4 containers - Velcorindo dosing (dmt, Burdomat II G) - Cap feeding and cap conveyor system (Procomac, 2005) - PET bottle rinser, filler and capper (Procomac, 2001) - Labelling machine (P.E. Futura, 2001) for hot glue labelling of wrap-around labels, in block with laser dating (Videojet, 2017, with suction) and label  ...

CNC HORIZONTAL MACHINING CENTER Inv. No. 12.178MM Make TOYODA Model LINEAM III Control MELDAS M650 Year 2004 TABLE Pallet size 450 x 450 mm Max. load on pallet 400 kg Table indexing increment 0.001 degrees STROKE X-Axis stroke 630 mm Y-Axis stroke 630 mm Z-Axis stroke 700 mm Distance from spindle center to top of pallet 50 – 680 mm Distance spindle nose /center rotary index table 50 – 680 mm FEED RATE Rapid feed rate X,Y 120 m/min Rapid feed rate Z 60 m/min Rapid feed rate B 120 m/min Cutting feed rate X,Y,Z 0,1 – 60 m/min SPINDLE RPM spindle 300 – 20,000 min-1 Spindle taper HSK-A63 Coolant Through spindle ATC Tool holder Special HSK-A63 2 Face contact tool Tool magazine storage 40 pcs Tool change time 2.5 sec. DRIVE MOTOR Spindle drive motor Ac 45/30 kW MACHINE WEIGHT & POWER REQUIREMENTS Machine weight 15.000 kg Power requirement 96 kVA ACCESSORIES: Spindle linear mo ...

Keg cleaning and filling system, comprising a keg conveyor, an external washer and a rotary system for internal cleaning and filling., Additional title: cleaning and filling, Capacity: 60 Keg/h each 50 l, Operation / Control: Siemens S7-300, Features: rotary filler (cleaner and filler), keg transport, 3 CIP containers, control cabinet

Depalletising and palletising system for Euro pallets with PETCYCLE crates. The empties pallets arrive via a lift from above. They first pass through a pallet denester, in which the empties are fixed, the transport securing cord is cut off and vacuumed. The crates are then destacked and transferred to the bottle ejector. The pallets continue to the pallet magazine/loader. After the pallets have been reloaded, they are secured with a cord and transported upwards in the second lift. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletising and palletising, Unloading capacity: 3600 crates/h, Loading capacity: 3600 crates/h, Power: 21 kW, Voltage: 230/400 V, Frequency: 50 Hz, Compressed air: 6 bar, 30 Nm³/h, Formats: Euro pallet, PETCYCLE crates, 20 x 0.5 l (400 x 300 x 256 mm), 9 x 1.0 l, 6 x 1.0 l, 6 x ...

Semi-automatic 5l Party Keg filling line, including 6-headed filler, capper, transport conveyors, washer and turner., Additional title: semi-automatic, Capacity: 240 cph, Power: 0.3 kW, Current: 1,85 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 3.2 cbm/h at 6 bar, Length: 5000 mm, Width: 3000 mm, Height: 2300 mm, Operation / Control: SPS S7-200, Features: Single-point, semi-automatic canner Transport unit washer and turner

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

Returnable glass bottle filling line, Additional title: Years of manufacture: 1991–1995, Capacity: 50000 b/h, Formats: 0,33 l LongNeck-, 0,5 l NRW-bottles, neck-/breast-/body-/back-labels, Euro pallets, Operation / Control: Siemens S5, Features: decrowner, decrater, bottle washing machine, empty bottle inspector, bottle filler and closurer, filled height inspection, labelling machine, dating, label inspection, crown cork inspection, crater, filled crate inspection, bottle and crate conveyors

, from the manufacturer (built in 2002) are available for sale, each with a . , totaling approx. 3,534 hl. The tanks are insulated, clad and have three frame cooling zones and cone cooling for precise temperature control. Each tank is designed for a maximum overpressure of 2 bar and can be used at operating temperatures of -10 to 50 °C. The total cooling area is 13.3 m². With a robust stainless steel construction and upright positioning, the tanks are ideal for breweries or beverage manufacturers that require temperature-controlled fermentation and storage processes. Individual sale possible. Our team at VBW Asset Trade will be happy to answer your questions., Additional title: vertical, coolable stainless steel tanks, Gross volume: 58890 l, Max. overpressure: 2 bar, Operating temperature: -10 to 50 °C, Total cooling area: 13,3 m², Length: 3370 mm, Width: 3370 mm, Height:  ...

Overview This high-performance can filling line was manufactured in 2013 by KHS and is designed for large-scale beverage production, particularly beer in aluminum cans. With a capacity of up to 48,000 cans per hour (500 ml), the line represents a modern, high-speed solution including depalletizing, filling, seaming, pasteurization, inspection, packaging, and palletizing. The core of the line consists of a KHS Innofill DVD 92 volumetric filler combined with a Ferrum F708G high-performance seamer, ensuring precise filling and reliable closing at maximum output rates. The line has been well maintained and remained in production until February 2026, and is available from Q1 2026. The overall installation features a compact, high-density layout with advanced conveyor and process integration, typical for modern KHS canning lines. Technical Data Capacity: 48,000 cans per hour (500 ml) 41,000 ca ...

for water, lemonades and fruit spritzers. : 0.5 L, 1.0 L, 1.5 L : 24,000 bottles/h (with 1.0 L) (currently only max. 18,000 bottles/h at the packer) The full bottles are packed in PETCYCLE crates. The used bottles that come back with the empties are removed from the crates at the ejector and sent for disposal. (Shredder is no longer available.) The new bottles are destacked pallet by pallet at the new bottle depalletiser and transported pneumatically to the rinser. The system consists of - - Manufacturer: Year of construction: 2001 - Manufacturer: Year of construction: 2001 - Manufacturer: & Year of construction: 1978 with downstream Velcorin dosing system - : - /, / Manufacturer: Year of construction: 2001 with chlorine dioxide and sterile water rinsing - -- Manufacturer: Year of manufacture: 2001 with Alcoa screw capper and liquid nitrogen dosing system -  ...

Overview This complete filling line for beverage cans was manufactured 2017 by the german manufacturer KHS.  The line is designed for beverage production, handling up to 40,000 b/h and is in a good condition.    Technical Data Capacity: 40,000 bph  Filling product: carbonated soft drinks and beer Bottle Formats: 500ml 211/202 Cap Formats: 211/202 Packaging formats: tray with foil Application: CSD + beer condition: good technical condition, dismantled   Scope of Delivery Bulk can depalletizer | LINKER | DPG-500 | 2012 Can inspection | TransTech | Hysek CanCheck | 2012 Can conveyor | LINKER / KHS | Conveyor RC | 2012 Rinser | LINKER / KHS | Triplex Rinser TR | 2012 Flash pasteurizer | KHS | Innopro 140/14/85 | 2012 Filler | KHS | Innofill Can DVD | 2017 Seamer | Ferrum | F08 | 2012 Lid feeder | NSM | Lidserver A30 | 2017 Conveyor | KHS | Innoline BTR | 2012 Filling height control | KH ...

Input line L 6200mmxW385mmxH920mm; Output line L12200mmxB1280mmxH950mm; push-off unit L1450mmxB1800mmxH650mm Auction-ID: A1-43429-28

4 overview photos to determine the size of the machine - afterwards photos per floor what happens to the carpet. Starting with the entrance with the pallet truck - here there is a lift in the ground that raises the pallet, a machine operator only has to fold the carpet onto the belt to send to the roll-up machine. Then it is rolled up and pushed to the middle part via hydraulic sliding arm in roll. Once in the middle, you can choose to place the carpet in a plastic packaging with/or without. After packing the roll, we see the end result in the photo (carpets in the end photo purely for illustration purposes and therefore not included, as well as the label printers that are in front of the machine are not included) Machine consists of 2x roll-up line and 1x packaging line. So the first photos are in mirror image the same for roll-up line 2. Auction-ID: A3-43519-16520

Equipped with: (1x) Makor TEP 2500 (350 kg) feed belt, (1x) Makor TEP 2000 (320 kg) feed belt, (1x) Ricambi RO135035 belt sander (2022), (1x) Tecnolegno N200/P belt sander and (1x) Tecnolegno N90/S belt sander, (1x) Makor double-sided polisher, (2x) control box (1200x600x1900 mm). With flexible extraction pipes Auction-ID: A1-43429-6

Input length 150-1000 mm; wood width 40-150 mm; wood thickness 15-100 mm; Press length 3300-6500 mm. compartment entry type BF 4-600/1500; input station ESTA-600/1000; Milling station CP-205/00/1000; Graco adhesive application system; gears and three-phase motor UKS 240/600/1000; infeed chain transport EKK 240/600/1000; VE 205 feed-through system; press Conti A-20/6500; chain transport; with milling tools; Test equipment and accessories Auction-ID: A1-43429-81

Auction-ID: A7-46302-1

Insertion of carpets with max width 3000mm - line around the bundling of several rolls of carpet - afterwards plastic is detached from the mobile knife and the ends are melted together via welding bar. Pak rolls further on the machine and goes towards ultrasonic sealer (generator is missing that generates energy - so it was no longer used but can therefore be put back into operation if generator ultrasonic is installed). Suit continues towards clipper machine (in 2 pieces - see photo). Auction-ID: A3-43519-16521

Wood length 600 cm including chain transport; tilter; chain transport with sorting key; stacker with elevator; stacking slats warehouse; Total set-up Dimensions approx. 22 x 10 meters; Roller conveyor length 13 mtr Auction-ID: A1-43429-87

Total force (nominal):800 to Clamping surface (left-right):x mm Clamping surface (front-back):x mm table surface area:3200 X 2200 mm Total force (nominal):2-3-4-5- Presse - 600 to. to table surface area:2-3-4-5- Presse 3100 X1900 mm Last overhaul 2010/2020, consisting of: Circuit board washing system, manufacturer Neuhäuser, with 6 cleaning rollers, system no. 0905200, control unit by Siemens Blank automation, manufacturer Neuhäuser, type 19711594-00-0, year 2002, SN 369507/002, system no. FK42282, consisting of: destacking device, oiler, pallet changer, empty pallet discharge Gripper automation, manufacturer Olofström, type Doppin Loader 2000, SN 37719974886, system no. 0602300 Double-column press, manufacturer Weingarten, type ZS 1200.34 Year 1972, order no. 113 021, pressing force approx. 800 t, double action, stroke 850 mm, stroke adjustment 350 mm, height between table surface an ...

material width:400 mm coil weight:3,0 t material thickness:0,5 - 4,0 mm coil internal diameter:460 - 530 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:50 mm no. of lower support rolls:12 no. of upper support rolls:10 diameter of support rolls:90 mm material cross-cut:1600 mm² speed of coil line:0 - 20 m/min power requirement:35,0 kW weight:10,5 t dimensions (WxDxH):10,0 x 2,5 x 2,9 m straightening machine:KRE 50.400/9 adjustment of straightening rolls :motoric insertion wedge:hydraulic adjustable decoiler:3000.1 snubber roll:hydraulic expansion:hydraulic sideway adjustment:motoric pivoting:manual roll feed:Servo; WVE 160/400 intermittant lifting:hydraulic

material width:300 mm coil weight:2 x 1,25 t material thickness:0,4 - 1,2 mm coil internal diameter:320 - 420 mm coil external diameter:1300 mm no. of straightening rolls:9 straightening roll diameter:30 mm number of draw-in rolls:2 roll diameter:30 mm speed:3 - 30 m/min feed length:0 - 9999,9 mm power requirement:3,0 + 2,5 kW weight of decoiler:0,7 t dimensions decoiler (WxDxH):2,1 x 1,4 x 1,5 mm weight of straightening machine:0,45 t dimensions straightener (WxDxH):1,5 x 0,8 x 1,1 mm weight of the feeder:0,4 t dimensions feeder (WxDxH):1,2 x 0,8 x 1,1 mm universal straightening machine:SC 12-FQ double decoiler:2352 B-FPS expansion:hydraulic lag brake:pneumatic electronic roll feed:WAV-RDS-2Z, Modell 1082 B intermittant lifting:pneumatic control:Siemens S 5

material width:600 mm coil weight:5,0 t material thickness: - 5,0 mm coil internal diameter:360 - 660 mm coil external diameter:1500 mm no. of straightening rolls:9 straightening roll diameter:80 mm number of draw-in rolls:2 material cross-cut:1600 mm² weight of feeeder-straightener:2,5 t weight of decoiler:1,5 t dimensions feeder-straightener (WxDxH):1,7 x 1,7 x 2,6 mm dimensions decoiler (WxDxH):1,8 x 2,0 x 2,3 mm feeder-straightener:VCRL 650, Bj. 1994, GR 2001 height adjustment:motorisch alligator opening:hydraulisch decoiler:SHR 5000, Bj. 2000 expansion:hydraulisch

material width coil line:600 mm coil weight:2 x 3,5 t coil internal diameter:460 - 530 mm coil external diameter:1500 mm material thickness coil line:0,5 - 3,0 mm no. of straightening rolls:7 no. of rolls at in- and outlet:4 roll diameter:80 mm feed length:0 - 500 mm power requirement:10,0 kW weight:10,0 t dimensions of the coil line:8,8 x 4,0 x 2,55 m straightening machine:Dimeco, 1676 EV double decoiler:2382 FFPS lag brake:pneumatic electronic roll feed:Microfeed

material width:500 mm coil weight:3,0 t material thickness:0,2 - 2,5 mm coil internal diameter:470 - 530 mm coil external diameter:1400 mm no. of straightening rolls:9 straightening roll diameter:40 mm number of inlet and outlet rolls:4 material cross-cut:1200 mm² speed:1,5 - 30 m/min dimensions decoiler (WxDxH):1,9 x 0,6 x 1,7 m weight decoiler:1,1 t dimensions straightener (WxDxH):3,3 x 1,3 x 2,7 m weight straightener:3,0 t straightening machine:RYD 40 x 500 decoiler:DY 500 x 3000 coil lifting device:hydraulic rool feed:elektronic; AESL 500-2,8 threading device:hydraulic expansion:hydraulic

Automatic foil wrapping machine which can be used for packing products like margarine or butter into aluminium foil. The machine is in a good as condition with main control panel with Siemens S7-200 PLC and frequency converter and operation panel with Siemens TD200 Operator Interface. Previously used in a margarine factory. The machine is equiped with a rotating forming drum with 4x rectangular molding chambers. The format on the machine is 250 gram, 98 x 65 x ± 41 mm. SIG folding principle (folding flap on the side, for less foil usage). The margarine is feed with a direct connection with compensator and return line. The machine is equiped with a photocell on the paper infeed, to control the exact position of the print on the foil. The speed can be adjusted by a frequency converter between 30 - 120 packages per minute (depending on product, packaging material and surrounding conditions ...

APV pilot UHT plant equipped with an indirect heating module using a plate heat exchanger and an aseptic homogeniser. The unit was previously used for R&D purposes in a dairy plant in Belgium. Capacity up to 400 litres per hour. Temperature profile: approx. 4 – 145 – 20 °C., The skid-mounted unit consists of a plate heat exchanger (APV T4) with 5 sections and a total of 127 plates (9-15-23-55-25), two regeneration sections, heating and cooling sections, hot water/steam section and indirect steam heating. The system is further equipped with three connectable holding tubes, balance tank (Ø 38 cm, height 75 cm, volume approx. 80 litres) with agitator for ingredient mixing, water circulation pump, centrifugal product pump feeding the balance tank and a high-pressure plunger pump (Cat) with variable speed control via frequency inverter. The installation includes all required valves and  ...

IMA P10K Automatic Butter Roll – Round – Log – portion wrapping machine in aluminium foil / parchment paper., The machine is included with the following pack format sets:, - Logs (or) Rolls (or) Round (or) Cylinder – ± 43 mm x 110 mm = 125 gram (complete), - Logs (or) Rolls (or) Round (or) Cylinder – ± 48 mm x 160 mm = 250 gram (complete including extra mouldset of ± 45 mm to reach ± 230 gram)., - Rectangular Blocks (or) Portions – 100 mm x 75 mm x 35 mm = 250 gram (filling nozzle and 1x guide for the bricks when they are upside down are missing)., - Rectangular Blocks (or) Portions – 160 mm x 105 mm x 65 mm = 1.000 gram (Guiding plate upside down, side guides and support level missing)., Product is fed through the hopper which includes a butter screw feeder., Maximum Speed: up to 60 packs per minute (Varies depending on the portion size), Products that can be packed: B ...

Overview This packaging line for repacking glass bottles into carriers, trays, cartons and dollies was produced between 2002 and 2016 by several European manufacturers such as Yaskawa, Profipack, DokuConsult KG and Krones. The line is currently still in operation until June 2025 and was specially designed for repacking 0.33L and 0.5L glass bottles into 6-bottle carriers (open baskets), returnable trays and various pallet types (Euro dolly, Euro pallet). It enables both the unloading and loading of full and empty containers into new packaging units. The system will be available from June 2025, as soon as it is decommissioned. Technical details  Output: up to 9,000 bottles per hour Formats processed: 0.5L NRW returnable bottles (brown) 0.33L non-returnable bottles (green and brown) 6 open basket carriers (2x3) for 0.5L and 0.33L Euro dolly: 400 x 600 x 1,600 mm Euro pallet: 1,200 x 800 x  ...

Overview This KEG bottling unit Micromat 2/2-b was built by M+F KEG Technik in 2009. It is composed of a KEG washer and KEG filler. Until dismantling it was used in a brewery in Belgium. Technical details  Capacity: 20- 35 keg/h KEG type: 20l/30l DIN and EURO Fitting type: Typ S Station 1: Interior cleaning Station 2: Rinsing, sterilization and filling Semi automatic system with intergrated CIP, CIP tank at the back of the installation Dimensions  Length: 1,100 mm Width: 1,300 mm  Height: 2,200 mm +/- 50 mm  Electrical connection Voltage: 230/ 400 V, 50 Hz, 3 phases Connected load: 0,5 kW (without tank pumps) 

Overview This Paxona line distributor for trays was manufactured in 2011 and is designed to divide a single infeed lane into two parallel lanes. The system is typically used in packaging or conveying lines to distribute trays efficiently to downstream machines such as packers, fillers, or palletizing systems. With less than 5,000 operating hours, the unit has seen comparatively low usage and represents a well-preserved solution for line balancing and product distribution. Paxona equipment is known for robust construction and reliable integration into automated production and packaging environments. The distributor is suitable for tray handling applications where a stable and controlled product flow from a single lane to two parallel lanes is required. Technical Data  Manufacturer: Paxona Machine type: Tray line distributor / lane divider Function: Distribution from 1 lane to 2 lanes Yea ...

Weinig Hydromat 2000 planing line with in and outfeed system, Manufacture year 2008, Consisting of:, - Weinig automatic infeed system High Mech E1, - Weinig moulder Hydromat 2000, - 6 spindles: B-R-L-T-T-B, - feed speed max. 60 m/min, - straight and profile jointers, - Weinig automatic outfeed system High Mech A1

Decoiler Coil weight: 2 x 2 ton Material width: 380 - 500 mm Coil exterior diameter: 1.300 - 1.400 mm Expansion range: 445 -530 mm Leveller / Straightener Material width : 40 - 500 mm Number of levelling rolls: 7 pcs. Diameter of the levelling rolls: 60 mm Number of pinch rolls: 2 pcs. Diameter of the drawing rolls: 60 mm Number of pull out rolls: 2 pcs. Diameter of the pull out rolls: 60 mm Material thickness: 0,4 - 1,6 mm Cross section: 800 sq mm Feeding speed: 0 - 30 m / min Required power: 3 kW

Handtmann mobile linking and hanging line, type linking machine: 217-21, number: 547, year of construction: 2018, 400 V, 3 Ph, 50 Hz, 6 A, 3.5 kW, weight: 290 kg, dimensions: 1300 mm x 700 mm x 1200 mm, type hanging line: 242-16, number: 10903516, year of construction: 2018, weight: 210 kg, dimensions: 2550 mm x 720 mm x 1400 mm. Including extra parts.

Marel Smartline weighing and sorting line consting of: - Marel grader, model: GR8330, type: 2034-10, serial number: 10482612, year of construction: 2021, 230/400 V, 3 Ph, 50/60 Hz, 2.7/1.5 A, belt width: 250 mm, total dimensions: 1400 mm x 750 mm x 1300 mm. - Marel weighing belt, model: GR8220, type: 7684852, year of construction: 2022, plastic mesh belt, belt width: 250 mm, total dimensions: 1500 mm x 800 mm x 1250 mm, - Marel infeed belt, model: GR8001, type: 7621272, serial number: 10482510, year of construction: 2021, plastic belt, belt width: 260 mm, total dimensions: 900 mm x 500 mm x 1350 mm, - Marel outfeed belt, model: 2.1.43 LAMELLENBAND, type: HM0101, serial number: LF858411, year of construction: 2021, plastic belt, belt width: 300 mm, total dimensions: 1400 mm x 500 mm x 1800 mm.

A complete industrial sawmill production line( Year of Manufacture : 2000) is available for sale , it includes the following elements: 1 - Log Yard Manufacturer: Hobest AG / EWD / Microtec / Herzog Forsttechnik Includes: • 3x Feed conveyor type NQF Hobest • 3x Step conveyor type HSF Hobest • 2x Block conveyor type BZ 500 Hobest • Chain swing saw with log holder type DSH/EWD-Stihl • Block conveyor with rotating device type BZ 500/S Hobest • Metal detector with conveyor type MSG/120 EWD • Tapered roller track type RGK Hobest • Root end reducer type Hobest Primus • Debarker type ER 90 EWD • Tipping trough type RKW/500 Hobest • Cross conveyor type NQF Hobest • Block conveyor type BZ 500-1E Hobest • Log measurement system type Kemes Keba • Sorting block train type BE 500/SA Hobest • Central hydraulic unit Hobest • Electrical control system  ...