We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,305 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
used
Producer: Krones construction year: In 1997 type: Linatronic achievement: 36000 b/h Kontrole: -lye - mouth - side wall - ground
used
sell a Strautmann PET BP 900 for PET bottles! Built in 2006, just a few hours of operation!
used
110 Valves, Division of 100 mm, with SV. Bu. 1995
used
Performance: 40 000 b / h -Control of dirt and damage on the side walls and the bottom of the bottles. -Double presence control of liquid (caustic soda) via detection of infrared and high frequency; -Check the status of the head of bottles (damage) -Oryginal technical documentation (Germany language) -additional parts
used
NERI DL400 self-adhesive labeller for bottles etc., with two labelling heads, suitable for bottles from 80 to 180mm diameter/width and from 30 to 120mm high. Output up to 100 containers per minute, all stainless steel construction.
used
Performance: 30 000 b / h
used
Aggregate repairs for any type of KRONES cold glue aggregate. Any spare parts for cold-glue units. Please enquire. We offer complete overhauls in-house at fixed prices within a week.
used
2 pieces of crane bottles
new
230559704/40
used
Motor rating 0,5 (0,7) kW (PS) Connected load 400V 50Hz (3-phase) Electrical protection 16 A Nominal rating max. 400 bottles/h Length 780 mm Width 550 mm Height 1210 mm Weight 80 kg Material 1.4301 / AISI 304 brushes from polyamide Pressure max. 3,5 bar Connection for cleaning AG-1/2\" (Gardena) water temperature max. 30° C Connection for waste water PVC-Schlauch inside Fi45mm, outside Fi50mm ; new machine - top condition
used
Used shrink capsule capper NORTAN, Type: UNICAP 35 Built-In: 2000 Suitable for capping of capsules in tinfoil, aluminium or thermo capsules. - complete equipped - with capsule supply table - feed in screw - format parts for 1 l and 0,75 l bottles available - Capacity : maximum 2.500 bottles/h - controlling for capper and heating shrink bowl installed Condition: very good, ready for operation. An inspection is possible at every time.
used
capacity: approx. 10 tacts / min We don't have any documentation!
used
1 of used level detector for bottles, make Heuft, type Basic HF-LT, new 2005. Over-/under-fill detection via high-frequency, optical closure and excessive closure height detection, "mono" pneumatic rejector, encoder. Rated at 22.000 bph.
used
J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...
used
KHS Seitz Champagne Filler 18 000 b/h Natural cork, 63 fillers
used
GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers
new
New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.
used
capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning
used
NERI SL 200 3T labeler, with 3 labeling heads for front, back and neck labeling with 3 label dispensers. Suitable for containers from 20 to 80mm diameter, label height from 10 to 120mm, label length from 13 to 190mm. Fitted with overhead container support. Output up to 100 containers per minute. Siemens S7-300 PLC controller with Simatic OP7 operator interface. All stainless steel construction.
used
Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!
used
Capacity: 50.000 bt. / h Currently equipped for 0.25l Vichy / 0.25l Gastro / 0.50l GdB / 0.70l GdB / 0.75l GdB / 0.75l Benelux / 0.75l Gastro Bottles. • Inspection of the mouth sealing surface • Inspection of the side wall (both sides) • Inspection of the thread • Detection of conductive residual liquids • Detection of residual liquids by IR • Diversion of faulty bottles • Diversion of bottles exceeding height and/or width as well as lying bottles Incl. module for detection of impact spots Incl. blower for removal of water drops
new
Dr. Junghans Medical hot water bottles 7,300 pieces, each with a volume of 0.6 litres, with or without cover - new in original packaging - are offered as follows: 1) 1,600 hot water bottles 0.6 litres, without cover, REF 10128, LOT 43946 2) 2,900 hot water bottles 0.6 litres, with cover red, REF 12128, LOT 43946 3) 2,800 hot water bottles 0.6 litres, with cover blue, REF 13128, LOT 43946 The hot water bottles come from an overstock at our customer. Single item sales from 1000 pieces would be possible by arrangement. The hot water bottles are still in our customer's factory near Leipzig (Saxony). The sale is carried out ex works EXW (loading possibility available). If the shipping costs are covered, shipping would also be conceivable. We sell the assets on behalf of our customers. The offer prices are to be understood as gross prices in EURO ex works. The offers are s ...
SLEEVE APPLICATOR CLEVER GS 602. performance on PET/Glass bottles: 45000 b/h : 0,4-0,5 L 24000 b/h : 1,5 L 22000 b/h : 2 L
used
Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane -Payload: 1000 kg -Dimensions: 4650/210/H90 mm -Own weight: 9 kg
used
Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...
used
Manufacturer: Procomac Model:Rinser Gripstar Speed:3500 bottles/h Equipment in Working Conditions Safety Sytems: Yes Technical Documentation: Available
used
Industrial inkjet printer VideoJet Excel 170i For printing labels, bottles, packaging, etc.: prints only in black colour, incl. mobile frame, light scanner and rotary pulse encoder for optimal speed adjustment
used
Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person
used
with 12 bottles/row cell pitch: 110 mm capacity: approx. 2,000 - 2,500 fl./h Oil-direct heated including oil burner
used
1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.
used
For different sizes,
used
Filler block, Fabr. Nagema, Type: Varifill 40/10K/10PP Capacity: 12,000 Fl/h, run on 0.33 lt longneck and 0.5 lt NRW bottles 40 filling valves 10-digit crown cork 10-digit screw capper (for MCA 28 closures), double pre-evacuation, Running direction: left -> right YOC 1994 L: 4,000 mm, W: 2,700 mm, H: 2,800 mm Price on request
used
Capacity: 9,000 bottles/h Product: Oil in 1,0l PET
used
Flaschenhalsgefrierer für 60 Flaschen Komplett aus Edelstahl Leistung 450 Flachen/Std Maße 100x 100x 90cm More then 300 machines new and second hand on our seema .de
used
Output: 39,600/h, additional accessories are available.
used
With inlet control, base inspection, mouth surface inspection, 270° side wall and residual liquid inspection, for glass and PET bottles, machine needs overhauling.
used
Formats: 0.25/ 0.35/ 1l, conneced load: 2.5kW.
used
Max. output: 30,000 bottles/h, format: 0.33/ 0.5l.
used
Output: 24,000/h, band speed: 0.5m/s, format: 0.25l GASTRO/ 0.5l GASTRO/ 0.7l GBD/ 0.75l GBD, GASTRO, with Sorting System HEUFT SPECTRUM SX TI 36, machines were overhauled in October 2021.
used
Output: 8000 bottles/h, machine is fully functional.
used
With inlet control, base inspection, mouth surface inspection, 270° side wall and residual liquid inspection.
used
Compressed air supply: 6-10bar, connected load: 7400VA, inspector is designed for 33cl and 50cl longneck bottles.
used
With documentation and pusher, has been regularly serviced, operating hours: 23,476h, the machine has already been dismantled.
used
Inspector, Fabr. Nail, Type: NAG, Type: Full inspection 5/8, up to 5,000 fl/h, furnished on 0.33 lt BV-Maurer + 1.0 lt bracket, KK 0.33 lt Gourmet, KK 0.5 lt NRW + EURO, running direction re->li for floor, muzzle, sidewall and lye control with new card for side control serviced annually
used
Filling Machine previously used for Milk Filler has 6 head filling and 2 head capping Cap Size : 38mm Labeler Conveyors Induction Sealing
used
-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l
used
Labeling machine with spare parts. The machines and parts are in very good condition. It consists of 4 labeling stations. 1 Station is used for cold glue labels 2 Stations are used for sticker labels 1 Station is used for tax label/banderole The labeling speed is 20,000 bottles/hour. Manufacturer: Krones Model: Solomatic Year of construction: 2006 Labelling machine with spare parts. The machinery and the parts are in very good condition. It consists of 4 labelling stations. 1 Station is used for cold glue labels 2 Stations are used for sticker labels 1 Station is used for tax label/Banderrolle The labelling speed is 20,000 bph. Manufacturer: Krones Model: Solomatic Manufactured in: 2006
used
Height: 3700 mm Length: 2650 mm Width: 930 mm Distance between the conveyor: adjustable
used
Vacuum filler, make SEN, with 28 filling valves, with 5-head screw capper for MCA 28 caps.
used
Vacuum Filler, make Vir Mauri, type: PAVON / S.12.DP, with 12 filling valves, in stainless steel, in good condition.