bottle used for sale

Bottle filler, make ICS, type: TPS 24/6K, with 24 filling valves and 6-head crown capper, adjust to 0,5 lt. NRW- and Euro-bottles, built 2002, was in operation until the end of 07/2022

Vacuum Filler, make Vir Mauri, type: PAVON / S.12.DP, with 12 filling valves, in stainless steel, in good condition.

PET-Filler, make: H&K, type: VVF112/14SV, with 112 Filling valves, with 120 mm pitch, with 14-head screw capper make Alcoa für PCO 28 caps, built 1985

Hinged tape chains of different manufacturers, different sizes, new and used on request

Depalletizer is used for unloading new bottles, delivered on pallets. After clamping one whole row from bottles layer by gripping head, the device delivers them to the unloading table, and the bottles are transported to the washing machine or filling machine. The device is designed to work independently in line, for glass and plastic bottles with different capacity. Depalletizer DNB-2022 consists of four components: 1. spring mobile wire rope hoist 2. a gripping head adapted to the type of bottles 3. table - unloading conveyor / adapted to the type of bottles, pallet and the room for the assembly of the depalletizer. 4. a beam made of structural steel attached to the ceiling of the room or mounted on supports. Capacity up to 6 000 bottles / hr. - Operation - 1 person - Dimensions of bottles: - diameter 20 to 120 mm - height from 50 to 350 mm - Lifting height to  ...

Klinger bottle washer, year of construction: 2000, capacity approx. 10,000 bottles / hour, Siemens S7, liter cell, currently on 330 ml + 500 ml + 500 ml swing-top bottle. Bottle diameter: 50 - 90 mm / Bottle height: 110 - 330 mm. Klinger Bottle washer, Year: 2000, Capacity approx. 10,000 bph, Siemens S7, 1.0 liter pocket cell, currently used for 330 ml + 500 ml. Bottle diameter 50 - 90 mm / Bottle hight: 110 - 330 mm.

LINE FOR FILLING EDIBLE OIL IN 1,0 LTR. PET BOTTLES Capacity: 6,000 hph x 1.0 L conisting of: Blower KOSME KSB 3000 – 2001. – 2 pcs x 3,900 fph Box for preforms with transport to the blower Compressor for cooling moulds MTA S.R.L. - 2000 KOSME bottle air conveyor – 1999 AISI 304 stainless steel Electrical control cabinet with PLC Built-in air filters It transports bottles from blower to filler Filler and capper – ICS-Slovenia - 1995 – 6,000 L/h Labeller ICS – 1995 – paper labels, cold glue Conveyor belts ICS – 1995 Packer in transport boxes 3x5 bottles – ICS – 1995 Shrink wrapper SMIPACK-packer in foil 2x5 bottles – 2013 Pallet wrapper ZLATOROG-Slovenia – 1999 KAESER low and high pressure compressors – 2000 Refrigeration dryer There are spare parts worth approx. 30.000.- EUR It has complete technical documentation Required space for eq ...

2 x KRONES SPIRIT / WHISKEY FILLING LINES LINE 6: CAPACITY: 6,600 BPH ON 1.75 LTR BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr, 1.5ltr, 1.75ltr LINE 7: CAPACITY: 12,600 BPH ON 70CL BOTTLES Line Suitable for: 50cl, 70cl, 75cl, 1ltr Location: Glasgow, UK.

MONOBLOC Delta 816S & Minerva 200 WireHooding EXTREMELY LOW MACHINE HOURS

Used bottle washer manufacturer: Klinger / Austria Year of construction: 2000 / General overhaul in 2010 at the Klinger Austria plant Type: Euro Class 24/1/844 Capacity: approx. 10,000 bph Control: Siemens S7 Total operating hours: 17,443 hours Net weight: approx. 18,000 kg Steam heated Can be used for bottles: Volume: 200ml - 1.000ml Bottle diameter: 50 - 90 mm Bottle height: 110 - 330 mm The bottle washer has so far been used for: 330ml Longneck 500ml Longneck 330ml swing top bottle 500ml swing-top bottle

The detection is set up on 0.5l glass bottles in the 20 module box. The inspector is equipped with a multi-camera system. As soon as a foreign bottle is detected in the box, it is then discharged via a pusher. Currently is set to cross travel. The detection is adjusted for 0,5l glass bottles and twenty modul crates. The inspector comes with a multi camera system. If an external bottle is detected, the crate will be pushed out in an other line. Currently the set up is for a long side leeding crate.

Machine was serviced annually. Maximum bottle diameter 69mm. Set up for the following formats: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Information without guarantee Yearly maintenance. Bottle diameter 69mm. Prepared for this sizes: Vichy 0,33l Long-neck 0,33l Long-neck 0,5l NRW 0,5l Steini 0,33l Informations without guarantee

2 LITRE PET LINE at 10,500 BPH KRONES BLOC WITH IPANEL (Yr 2010) - 70 FILLING HEADS- 12,500 BPH MAX SPEED SIDEL SBO8 BLOW MOULDING AIRVEYOR COOLING CONVEYOR KRONES AIRCO INFEED CONVEYOR KRONES CARBONATOR (2010) HEUFT INSPECTION (2012) KRONES CONTIROLL LABELLER (2012) SMI DIVIPACK & SMI OVERWRAPPER KHS HANDLE ATTACHMENT LOGOPACK PACK LABELLING ACMI PACK SORTING & ROBOT PALLETISING FANUS PACK HANDLING ROBOT TOSA PALLET WRAPPER LOCATION: UK The line is installed in the factory and inspections are most welcome. The machinery is in good working condition and ready for engineering removal. We can provide the full installation service if required. Please contact Indassol today for a quote!

5 LITRE PET LINE - 2,000 BPH Sidel ‘SB02F’ Rotary Blow Moulder, M08 neck finish, Sidel Preform Hopper and Feeder Elevator with Sidel Preform Unscrambler Air Conveyor System with swan neck elevator and lowerator AVE 15 Valve Filler and 4 Head Capper with cap hopper and elevator (2004) Comag ‘PLH2500’ Neck Handle Applicator (2008) Harlands 155WS RC Inline Labeller (2010) Smipack ‘BP700AR’ Shrink Wrapper (2006) Smipack ‘T650’ Conveyorised Heat Tunnel (2007) Logopack ‘410IIIF’ Pack Labeller (2015) Lita ‘Eco’ Palletising System comprising of infeed metal roller conveyor, Lita pack stacker with carboard tray insertion, pallet infeed and outfeed system TOSA ‘85’ Rotary Pallet Wrapper, Type AV5866 and outfeed station Location: UK This 5 Litre PET line is in good working order, and inspection in the factory is most welcome.  ...

top condition

FOR IMMEDIATE SALE: GLASS BOTTLE FILLING LINE FOR STILL AND CARBONATED DRINKS 330ml & 500ml LOCATION: MANCHESTER CAPACITY 16,000 BOTTLES PER HOUR - 330ML This line is in very good condition and is extremely reliable, maintenance procedures in this facility are excellent. Viewing is encouraged. Please Contact Indassol for videos of the line running 330ml ginger beer product Line 9 - 330ml and 500ml Glass Bottle FEATURED ITEMS: • Makro 6 Station Auto Changeover Self Adhesive Labeller (Year 2018) • Krones Variojet Mecafill Multi Bloc (Rinser, Filler, Crowner and Capper) (Year 2002) • Heuft Low/High Level Rejection System (Year 1997) • VM Systems Laning Device (Year 2005) • OCME Altair Box Packer (Year 2015) • Denwell Carbonation Unit (Year 2020) • Tetra Pak (Tetra Plex) Plate Heat Exchanger For Pasteurisation • Process Tanks Ja ...

Used bottling line by Pack-Trend, new 2020. Machine type: Dispensing, capping, labelling machine Weight: 675kg Type of medium: liquid, gel, cream. Material stainless steel AISI304 Machine capacity: up to 900 cycles/hour Packing portion: 0,1-0,5 L Machine dimensions working: Height H - 1600mm Width B - 1500mm Length L - 3000mm. Electrical supply: 230V/50Hz Pneumatic Supply: 6-8 bar Power consumption: 1500W Accessories: ROTARY RECEIVING TABLE ROTARY INFEED TABLE Certification: CE Technical and Operational Documentation.

Blower for water droplet removal in front of inspection machines

Bottle filler, make Holdefleiss, with 16 filling valves.

dmp Sondermaschinenbau type ORL-300 orientator for plastic bottles, bottles where the caps are not in the correct position to the position of the labels are turned by 180° before being delivered to the next machin, capacity 120 bottles per minute, electrics 3+N+PE 400V/50Hz/16A, power consumption approx. 1,1 kVA, compressed air max. 6 bar, machine floor space approx. 1200 x 1050 mm (LxW), machine height approx. 2100 mm, machine net weight approx. 200 kg

Bottle filler, make BKM, type: Varifill 40/10K/10PP-100, for 12.000 bph, with 40 filling valves, with 10-head crown capper and 10-head screw sealer (for MCA 28 caps), with double pre-evac, runs on 0,33 lt Longneck- and 0,5 lt NRW-bottles, direction: left->right, built 1994.

Used KRONES carbonated drink bottling line – capacity: approx. 7,000 bottles/h • Bottle formats: 330, 500, 700, 750, 900, 1000 ml • The line worked with cider, sparkling wine and champagne. • Possibility of pouring beer in a returnable/non-returnable bottle • Possibility to check and run the line before purchase. Available immediately. The line includes: 1. Bottle unloader for returnable bottles Kettner 1989 (Kontipack E) 2. Krones returnable bottle washer from 1988 Type 150/10-110 3. Krones VKV40/SV10/KK filler from 1988 - 40 fillers with ALCOA capping machine 4. Krones capping machine 5. Bottle capping machine ADELSKI PP2010, 2007 (Adelski) 6. Manual cork presser 7. Installation for Velcorin 8. Wire insertion machine (Nortan, Minerva 80-120, 1995) 9. Machine for applying gold (Nortan, Prisma 80:s, 1994) 10. Labeling machine + banderole (Krones Taxomatic, KES -  ...

Beer filler, pressure filler, Vipoll GEA, type: Visipraktik VKR-ES-DN 12-3K, year of manufacture: 2013, capacity max. 3,000 bottles / hour, for 330 ml, double pre-evacuation, less than 1.000 operating hours, bottle diameter 50 - 105 mm, bottle hight 125 - 370 mm, Optional: Bottle transport conveyors Beer Filler, Counterpressure, Vipoll GEA, Type: Visipraktik VKR-ES-DN 12-3K, Year: 2013, capacity max. 3.000 bph, adjusted to 330 ml, double pre-evacuation, low operating hours Optional: Set of bottle conveyors, rotating table

Used monobloc made by Stork Bepak b. v. Bottling & Packaging System: Utrecht Netherlands type VS 60/110/12 LV. New 1992. Specification: - 60 pourers, - 12 closing heads, - Filler and cap inspector, - Capacity 20,000 bottles/hour, - Contents: 250 ml., 500 ml., 700 ml., 750 ml.

Used STORK 0.75 l non-carbonated bottling line – capacity approx. 8,000 bottles / h • Bottle formats: 750 ml • The line poured still/still hot wine. • Possibility to check and run the line before purchase. • Available immediately. The line includes: 1. Bottle unloader for returnable bottles Kettner 1988 (Konti- Auspacker) 2. Label ripper 3. Krones returnable bottle washer (KES 1-3-212, 1992) 4. Soda lye detector (Michael Horst, miho LC2000 5. Stork pouring machine (VD48/8, 1978), 48 pourers 6. AROL – SATURNOR12T600 capping machine, 1991 7. Rolex automatic closing machine (type: SWK-800 from 2001) 8. Plate pasteurizer 9. Manual presser 10. Banding machine (KRONES, Taxomatic, 1995) 11. Bottle loader into crates (Kettner, Konti-Einpacker, 1988) 12. Transporters 13. Control cabinets 14. Documentation

Bottle washer, Fabr. Krones, type: Lavatec KESK-212/22-80, 22 bottles/row, with 80mm Cell division, plastic cells, with attached control cabinet in stainless steel, built in 1999, L: 7,955 mm, W: 4,216 mm, H: 3,270 mm, already dismantled and stored

1 of used glass bottling line for still and carbonated water Used for glass bottles 330 ml (D 61,3 x H 207,9 mm), 750 ml (D 78,0 x H 294,9 mm) and 1.000 ml (D 88,3 x H 318,7 mm) at speeds (limited by filler capacity) between 6.000 (1.000 ml) and 10.000 (330 ml) bph., mostly new 2000, plcs: Modicon, consisting of Ave Alta Meccaniche DBR50 bulk-bottle depalletizer, AVE 5.000 lph carbonator, AVE 24/24/6 rinser/filler/capper (28 mm ROPP), Kosme Unicol 720-9-2 dual-aggregate wet-glue labeler (new 2013!), Domino laser coder, Freemantle tray erector, Ave Alta Meccaniche type Inca 1T pick&place tray loader, (single-head machine, with heads for 12x 1000 ml, 12x 750 ml and 24x 330 ml), Dimac Starfilm LS film-only shrinkwrapper (overwrapping of trays), Ave Alta Meccaniche PABR 50/1 Palletizer. Some interconnecting conveyors.

From insolvency: Converter Wacker FU 1.6 380 volts 2x cylinder connection 3-pin untested, because there is no suitable vibrating bottle available

From insolvency: Converter with vibrating bottle Rilco 380 volts 58mm Bottle Function tested

From insolvency: Vibrating Bottle Rilco 56mm unchecked

Bottle washing machine GERA type: Arcade year of manufacturing: 2010 working hours: 32767 capacity: approx. 33.000 bph by 1,0 ltr. bottles control range: 13.200 - 36.300 bph cell pitch: 110 mm bottle cells per row: 30 bottle cells complete: 7.860 with pre-soaking The machine is still in production in Germany and will be available in February 2025

We sell our bottle washer the hourly output was at 4500fl/h YOC 1988 13 cells Length = approx. 7m Width = approx. 2.2m

Krones Filler Beer Glass Bottles counter pressure counterpressure isobaric, 24 valves, 6 head capper crown corker, Year: 1990, with Siemens S7, Pre-evacuation, Vacuum Pump, for 33cl Logneck, 33cl Steini, 75cl, 250 ml + 330 ml + 750 ml Krones Filler Beer Bottle Filler Glass bottles, 24 valves, 6 heads Capper crown corker, built in 1990, with Siemens S 7, pre-evacuation, for 33cl Logneck, 33cl Steini, 75cl, 250 ml + 330 ml + 750 ml

KHS/ALFILL ULTRACLEAN RINSER-FILLER-CAPPER Model: linefill CP48-16-8, Year of make: 2003 Capacity: 6000 bottles per hour Bottle volumes: 1000 ml, 750 ml, 500 ml, 330 ml, 250 ml, 200 ml Format change time: 15 minute USED SLEEVER CLEVER USED SHRINK TUNNEL USED ACCUMULATION CONNECTION AND EXIT CONVEYOR SYSTEM

Bottle filler, make MAG, type: RPe 12/3, for 2.000 bph, short pipe filler pre-evac, runs on 0,5 lt. EURO-bottles, l ->r, built 1994.

Empty bottle inspector, make Heuft, type: Spectrum TX (HBBIRTI24), built 2006

Labeling system for round bottles. System incl. code reader LAETUS, hot stamp system ALLEN, rejection of faulty products, 3-roll system, PLC SIEMENS Simatic S7-300, label dispenser. Max. label height: 90 mm. Max. passage width: 100 mm.

An inspection system for bottle label inspection is offered, Throughput capacity 15,000 bph With 3 cameras and control

Bottling line for breweries – capacity: 15,000 bottles per hour This bottling line was installed in 2015 by the German manufacturer Hormes as part of a complete brewery. The entire bottling line has been dismantled and is available. The production capacity is 15,000 bottles per hour, ideal for 0.33-liter non-returnable glass bottles. Components of the filling line: New glass lifters | Hormes • Pallet size: Suitable for new glass pallets measuring 1000 mm x 1200 mm • Drive: Electrically operated chain hoist for efficient lifting operations • Truss length: approx. 4,500 mm Fully Automatic Rinser | Hormes • Capacity: Up to 15,000 bottles per hour • Nozzles: At least 36 spray nozzles, matched to a specific bottle size • Cleaning: Cleaning the inside of the bottles with fresh water, spraying time approx. 1.5 sec., draining time approx. 5 sec. Automatic Bottle Fi ...

Pressure filler Krones / Germany Type Mecafill VK2V 24/6KK/6SV Filler 24 filling stations + crown corker KK6 + capper SV6 Short tube Max. approx. 8,000 containers / h Container 0.33 + 0.50 liter glass bottle Year of construction 1995 - PROJECT: FILM AVAILABLE - PLEASE REQUEST Further documents and price on request

• Fully automatic machine for cleaning (blowing out) bottles using compressed air • Running direction from left to right • Connection pressure 6-9 bar, working pressure 0.5-3.0 bar • Output max. 12,000 bottles/h • Bottles are rotated 180° so that the openings point downwards. Blow-out needles plunge into the interior of the bottles • Pressure sensor for checking the correct blow-out pressure • Extraction of blow-out air and residues below the bottles • HMI Siemens Simatic Touch Panel • PLC Siemens S7-300 • With format set for 10 ml vials (diam. 25.3 x 46.2 and diam. 24.0 x 45.0, other format sets on request) • Connection 230/400V/50Hz • Has worked together with bottle unscrambler 02-0746 (see pdf)

Mobile high-performance all-round bottle labeling machine incl. label dispenser PAGO 6/2 6 R7/510, rejection of faulty products, 50 ml format set for diameter 46 x 68 mm height, hot air system ALLEN type NX2i, PLC SIEMENS type Simatic S7-300, etc.

Steel bottle cart PAGUS for 10 - 40 liter bottles bottles Ø max 240 mm Dimensions: 750 x 770 x 1340 mm

Fully Equipped Bottling System A complete bottling system, ideal for beverage production! Perfect for both small and large-scale operations. System Components: Heated water tanks: 6 units of approximately 3000 liters each 1 unit of 6000 liters 1 unit of 10,000 liters Production lines: 2 complete bottling production lines Small bottling systems: 4-5 units for smaller productions Vacuum machines: Various machines for efficient packaging Blue Water system: Large system with separate oil burner Additional equipment: Approximately 70 components, including machines, spare parts, and accessories Advantages: Ideal for starting or expanding your beverage production Complete system, ready for use High production potential Has been active until 2023

Bottle washer, manufacturer: Krones, type Lavatec KES, built in 1997, 110 mm bottle cell, Siemens S7 with touch screen Glass Bottle washer, Made: Krones, Type Lavatec KES, Year: 1997, 110 mm bottle cell basket, Siemens S7 Touch Screen

Empty bottle inspector dismantled and stored now Manufacturer: Krones Type: Linatronic 735 M2 Year of construction: 2007 Output: 39.600 bottles per hour Additional info: Glideliner, accutable and partly conveyor belts are also The Krones Linatronic 735 M2 is a high-speed label inspection machine designed for use in the food and beverage industry. It was released in 2007 and is capable of inspecting up to 72,000 containers per hour. Here are the specifications for the machine: - Dimensions: 4.4 meters long, 1.7 meters wide, and 2.7 meters high - Weight: approximately 4,500 kg - Power supply: 400V AC, 50/60 Hz, 16A - Maximum container diameter: 120 mm - Label height range: 10-200 mm - Label length range: 15-300 mm - Inspection accuracy: up to 99.9% - Maximum speed: 72,000 containers per hour - Operating temperature range: 5-45°C - Air pressure: 6 bar The Linatronic 735  ...

For sale is a functional, well-preserved Krones Linatronic empty bottle inspector. Specifications: Manufacturer: Krones Model: Linatronic Year of Make: 1997 Quantity: 1 pc. Capacity:- Voltage: 230/400 V Frequency: 50 Hz Length: 250cm scaffolding + 70cm overhang towards filler Width: 110cm Height: 280cm Equipment: Formats see pictures

For sale is a well-preserved bottle washing machine of the MAG brand. The machine was in use until about 4 months ago and is available now. Specifications: - Capacity: 9,000 - 18,500 bottles/hour - Year: ca. 1985 - Bottle cells for 0.5 litres, NRW, Vichy - Water baths/headboard made of stainless steel - Dimensions (LxWxH): 8,800x2,900x3,1600mm

SARCMI BLUESTAR 2000 Complete PET filling line: Blow Molding Machine - SBO-14 ROUE - 18.200 bph Air Compressor - CE68BSG40 - 38,9 m3/m Air Conveyor Monoblock Filler BLUESTAR 2000 - 1R 54 72/9H - 0,5 l. -20000 bph, 1,5 l. -15000 bph Cap Elevator Labeling Machine ROLLQUATRO F30 - 24000 labels/hour Fill Level Control Device - STRATEC Shrink Wrapping Machine - АРЕТ 143/DF - 20000 labels/hour Bottle and Packaging Conveyor Pallet Stacker - PALKOMBI Series IBP429 - 30 pallets/hour Pallet Wrapper - ROTOPLAT 2000 - 30 pallets/hour All machinery in good condition, complete working line.

Used Depalletizer New Glass New Glass Depalletizer with Bottle Transport, Discharge Conveyor, Intermediate Layer Collector Used new glass depalletiser depalletizer, buffer glass bottle table conveyor, automatic layer depalletiser, inflatable tubes