bottle unscrambler used for sale

​Complete aseptic line for the production of pasteurized products (using it for ice tea bottles). The line is installed in 2005, has been operating since 2006 and will run till Q3 of 2026. The line includes processing area (mixer, pasteurizer and sterile buffer tank) APA platform (solution for sterilizing the PET bottles and caps), filler, CIP modules for processing and filler, 4 cameras full bottles inspector (360 degrees), accumulation table, labeling machines (roll on and sleever) packer, palletizer and stretch wrapper., General:, Size of the bottles: 400 ml / 500 ml / 1,5 liter bottle with stopper (cap), Material of the bottle / Compesition: PET, Bottle closed with a snap cap, Capacity of the line: depending on the bottle size: 18.000 l/h and 27.000 l/h, Product: Ice tea (softdrink), Scope of Supply:, 1. Mixing plant, Manufacturer: Tetra Pak, Model/type: Alblend 10 2S FB, Year of m ...

Bottle washer with rinser function with additional cleaning basket and jack and 6 canisters of cleaning agent - Jemi - new generation built in 2022

Overview This returnable glass bottling line consists mainly of equipment from KRONES and selected components from other established European manufacturers such as Hormes, RINK and HEUFT. The line is designed for a nominal output of 33,000 bottles per hour and includes the main process steps from depalletizing to palletizing.  The labeling machine will be completed according to the buyer’s requirements, allowing the line concept to be adapted to the intended bottle and product portfolio. The line is suited for returnable glass beverage applications. Based on the listed machines, the line is structured for crate handling, bottle washing preparation, empty bottle inspection, high-capacity filling/capping and returnable crate repacking. For bottles with screw caps, the RINK machine can be used upstream of the bottle washer; for crown cork bottles, an additional format set is required as  ...

Used, complete aseptic bottling line manufactured by Procomac. New: 2005. A controlled-contamination filling line with microbiological isolation, designed for filling products with a pH lower than 4.5. Suitable for PCO 1881 28mm bottles; sport-cap and flat-cap closures. General description of the system: Bottles delivered to the monoblock are completely sterilised with an oxidising solution, rinsed with sterile water and delivered to the filler. The bottles are filled by electrically controlled fillers and sealed using an aseptic capping machine. The caps are fed to the steriliser via a feeder and a belt conveyor in a positive-pressure environment using sterile air; they are sterilised with an oxidising agent (oxonia), rinsed with sterile water and fed to the monoblock via a positive-pressure feed channel with sterile air. The monoblock is equipped with a microbiological isolator ...

KRONES ROUND GLASS LINE Features: • Year 2003 • 500/600BPM @ 700ml, 750ml, 1 Litre • Wraparound Boxes • 6 & 12 Pack • Cold Glue Front, Back & Tax Strip Labeller Asset List: 1 Waste compactor; 2006; Orwak; 9020; 54414; 415/50 2 De Palletiser; 2003; Krones Kettner; Prress Uni Abscheiber;22/0142/012; 415/50 3 Rinser 72 heads; 2003; Krones; Variojet; K563-291; 415/50 4 Filler 108 heads; 2003; Krones; Isofil; 2880 072-126; 415/50 5 Capper 18 heads; 2003; Krones; Topmatic/ Zalkin; 734-203; 415/50 6 Label check; 2015; Logics & Control; Logilook; 2359; 240/50 7 Case packer; 2003; Krones Kellner; Wrapapac W60; K95-044; 415/50 8 Laner; Krones; Multidivider 9 Robot; 2003; Krones/Kettner; Robogrip Entlander; 22/0795/008; 415/50 10 Spiral Case Elevator; Amberflex; 415/50 11 Bottle coder; 2017; Linx; 7900; AN135;240/50

STORK MINIATURE LINE Features: • 50ml Glass & PET • 200 BPM • Flask Oval Round • Self Adhesive Front & Back Labeller • CAP Size 18 X 12, 20 X 12 ROPP Asset List: 1 Manual bottle infeed 2 Bottle conveyors 3 Header tank stainless steel 4 Rinser filler capper; 1996; Stork; Block 36 head rinser, filler, 9 head capper. New PLC HMI fitted 2021; 415/50 5 Level control / case reject; 2017; Logics and control; Logilevel HF1400; 2723; 240/50 6 3 station labeller; 1996 ; Krones; Autocol; 747-264; 415/50 7 Checkweigher; 2022; Garvens; Safeline; 333968; 240/50 8 Scale check; 2017; Logics and control; Logiweight LS; 2721; 240/50 9 &10 Case packer; Ganz brothers; CB90; DS22392; 415/50 11 Case sealer; 1995; 3M; 800AF-E; 2247; 240/50 12 Case coder and reject; 2019; Linx; IJ375; JB590; 240/50 13 Case erector; Kettner 14 Carton spiral elevator; 201 ...

BERTOLASO LINE Features: • Flask & Round • Glass & PET • 200BPM • 100ml, 200ml, 300ml, 375ml, 500ml • Wet Glue Front & Back Labeller Asset List: 1 Case erector and spiral elevator; 2013; Bortolinkemo; 415/50 2 DEPAL; 2000; OSMEKA; VAE; 521-0742; 415/50 3 Bottle conveyors 4 Rinser, filler, capper; 2013; Bertolaso; Epica 32/32/8; PMDM010128; 415/50 5 Packing table; 2006; Hutton; Gravity roller; 240/50 6 Labeller; 1994; Cavagnino & Gatti; C4810; 415/50 7 Case packer; 2005; Aries; 602; 152; 415/50 8 Case sealer; 1995; 3M; 800 AF; 224; 415/50 9 Case coder; 2019; Linx; IJ375; JB494; 240/50 10 Level check; 2017; Logics and control / Bertolaso; Logilevel plus; 240/50 11 Case spiral elevator end of line; 2022; Ambaflex; Spiralveyor SV; 51947-02; 415/50

STORK GLASS LINE Features: • Round, Shaped, Tapered • 350ml, 700ml, 750ml, 1.14 Litre • 200BPM • Wet Glue Front, Back, Neck Labeller Asset List: 1 DEPAL; 1996; Osmeka VAE; 521-0136; 415/50 2 Carton erector with Nordson hot glue applicator; 2013; Bortolinkemo; 415/50 3 Rinser filler capper; 1996; Stork; RVR30/146-36-9 LW; 021.141.10; 415/50 4 Labeller; 1996; Cavagnino & Gatti; CG84CL3/18; B4900; 415/50 5 Laner; 1996; Stork; SIE1500PB3; 031.169.00; 415/50 6 Case packer; 1996; Stork; 415/50 7 Case sealer; 1998; 3M; 800Afe; 3158; 415/50 8 Scale check weigher; 2016; Logics & Control; Logiweight LS; 2513; 240/50 9 Spiral carton elevator; 2022; Ambaflex; Spiralveyor SV; 51947-01; 415/50 10 Spiral carton elevator; 2013; Ambaflex; Spiralveyor SV; 15432-02; 415/50

Glass Bottle Filling and Capping Monoblock KHS Innofill 32000 bph The KHS Innofill ER-ZMS is a 80 filling valve, fully automatic rotary glass bottle filling and capping monoblock designed for the bottling of beer, carbonated soft drinks and other beverages in glass bottles. The filler was manufactured in 1997 and refurbished in 2023 with new Simens Simatic S7 series control system. The filler is a counter-pressure filler and it has two capping units integrated in one monoblock triblock. Both cappers has 15 capping heads, crown capper for glass bottles and screw capper for PET bottles, providing flexibility on production using the same production line. The KHS Innofill DRS-ZMS is a fully automatic electronic pressure filling system designed for hygienic filling of carbonated beverages. Product, gas and CIP media are supplied through hygienic, deposit-free sealing systems to ensur ...

Vibrating bottle 48 mm, w/converter, residual container

Vibrating bottle 48 mm with converter LÖTZKE Rabbit, S/N 101829, 230 V, IP 21

Double bottle trolley steel, solid rubber tires

Overview This PET bottling line consists mainly of equipment from GEA Procomac, complemented by machines from Arol, VBC, SMI, TwinPak, Robopac, SIPA, Logopak, Domino, Ventilo and PE Labellers. The line was mainly manufactured in 2009, with several later additions and upgrades between 2013 and 2022, including the pallet wrapper, labelling machine, Domino laser coding system and extraction unit. The line is suitable for beverage production in PET bottles and includes the key process steps from air conveying, rinsing, filling and closing to nitrogen dosing, tray-shrink packing, handle application, palletizing, pallet wrapping, pallet labelling, sleeve labelling, coding and extraction. Technical Data Line type: PET bottling line Capacity: 12.400 bottles/h Application: beverage filling in PET bottles Main manufacturer: GEA Procomac Main year of manufacture: 2009 Later upgrades / additions: 20 ...

Manufacturer: RINK Machine type: Capsule Roller Year of manufacture: 09/2022 Electrical Specifications - Rated voltage: 230/400 V - Network type: TNS - Mains frequency: 50 Hz - Full load current: 4.5 A - Short circuit resistance: 10 kA - Isolating device: 10 kA - Pre-fuse: 3x6 A Protection - Enclosure protection rating: IP 55 Find more here - / Contact us at -

A combined rotary bottle filling and capping machine MAG Schymanski (filling monoblock) with capping heads renewed in 2023 is available. Capper manufacturer: Arol, capper type: Euro VA, filling system: rotary filler, filling valves: 28, capping heads: 4, filling capacity range: 3500bottles/h-6000bottles/h. Documentation available. An on-site inspection is possible.

Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l 

Overview This empty bottle inspector (EBI) was manufactured in 2014 by the German manufacturer Krones. The machine is designed for the inspection of empty glass bottles prior to filling in beverage production lines. It is still in production and will be professionally dismantled in early 2027 as the complete filling line will be replaced. Technical data Capacity: currently running at 18,500 bph, but can also work at significantly higher speeds. Formats: 0.75l bottle 0,5l bottle Application: Inspection of empty bottles prior to filling Configuration: Multiple inspection modules including base inspection, sealing surface inspection, thread inspection, mouth/finish inspection, sidewall inspection, residual liquid detection, foreign container detection, bottle height control (±2.5 mm tolerance) Inspection systems:Base inspection (camera) Sealing surface inspection Thread inspection (conical ...

Overview This Krones Linatronic M empty bottle inspector, manufactured in 2015, is designed for the reliable inspection of returnable glass bottles in beverage production lines. The system combines multiple inspection technologies including camera-based vision systems, infrared sensors, and high-frequency detection, ensuring the identification of contamination, residual liquids, closure issues, and bottle defects. With a capacity of up to 15,000 bottles and more per hour, the machine is well suited for medium-capacity bottling lines. The unit is equipped with a 3-fold Ecopush rejection system and supports a wide range of bottle types and glass colors, making it a flexible solution for breweries and beverage producers. Technical data Manufacturer: Krones Model: Linatronic M Machine type: Empty bottle inspector Year of manufacture: 2015 Capacity: up to approx. 15,000 bottles per hour and  ...

Overview  This complete bottling line was last used for bottling spirits and includes a vacuum filler with screw capper, a conveyor belt, a labeler and a printing and inkjet system. The line achieves a maximum output of 1,500 bottles per hour and processes 700 ml and 1,000 ml bottles. Technical details  Output: 1,500 bottles/hour Formats included: 700 ml, 1,000 ml Last used for: Spirits Scope of delivery Feeding table Vacuum filler & screw capper | Toscana Enologica | Monomatic TS | 2008 Conveyor belt (single-track) | Krones Labeler | Enos | T3 | 2017 Inkjet printer | Makroprint | X1 Jet | - Inkjet system | Linx | 5900 | -

Overview This complete filling line for returnable glass bottles was manufactured between 1993 and 2004 by several well-known European producers, mainly Klann, Klinger, Krones, Nate, and Datz. The line is designed for high-capacity beverage production, handling up to 20,000 bottles per hour in different formats.  It includes all components from decrater to crater. The line is for it´s age in a good condition. The labelling machine was maintained in 2023 completely. It remains installed and connected and can be inspected upon request. Technical Data Capacity: up to 20,000 bph Bottle Formats: 0.25 L Vichy, 0.5 L Set 1–3, 0.7 L GDB, 0.75 L GDB Application: Water, CSD, or other beverages in returnable glass bottles Condition: Line in good condition Availability: Immediate Status: Still installed and connected   Scope of Delivery Decrater | Otto Fleischer | 1993 Crate washer | Klann | 2, ...

Overview The Heuft InLine IR – high speed empty bottle inspector is characterized by its compact installation dimensions. High-speed inspection of empty bottles is easily possible (up to 50,000 bottles/h). It can perform all standard inspections (sidewall inspection, infeed inspection, neck finish inspection, base inspection, discharge inspection, HF caustic and IR residual liquid detection). In addition, it has a separate module for foreign bottle detection (height, contour, color). In 2016 it was overhauled and modified installed including conveyor control. Tech Specs: Capacity: 5,000 – 50,000 bottles / h Compact installation dimensions 2016 overhauled and modified Features: Processes all standard inspections: sidewall, infeed, neck finish, bottom, discharge, HF caustic and IR residual liquid detection Separate module for foreign bottle detection (height, contour, color)

Dry spices BBD 2022 3 bottles Bullin LP liquid each 1.5 kg, approx. 8x 1 kg div. spices, BBD 2025

Overview This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data Manufacturer: Klinger Type: BC 16/1 Year of manufacture: 1993 Application: Returnable glass bottles Material: Full stainless-steel construction capacity: 20.000 bottles/h Features Complete stainless-steel construction Steam extraction system Finger infeed and finger discharge Chemical dosing system Rotating spray pipe system Lauer control panel Conductivity measurement Stainless-steel filter inserts Plate heat exchanger Compatible with ...

Bottle shakers without designation, total quantity approx. 4 pcs., details n. can be viewed

Filling line for 0.33 L disposable Euro bottles The bottles are placed by hand on a bottle loading table. From there they run on a conveyor belt to the labeling machine, where an all-round adhesive label is applied. Then they go to the combined rinser/filler/sealer, and downstream bottle collection table, from which the bottles are manually packed into crates or other containers., Additional title: Glass bottle filling, Nominal capacity approx.: 3750 bottles/h, Formats: 0.33 L disposable Euro- and Vichy-bottles, Running direction: left -> right, Operation / Control: Filler: Siemens ET 200 SP, Touch Panel, Position: free standing, Features: Bottle loading table, labeling machine from Intrex (model: Intrex Set with all-round adhesive labeling), bottle rinser/filler from Leibinger GmbH (rinser model: 12 BG, filler model: Multima L (= long-tube filler) control: Siemens S7, built in 2019), Bo ...

Single-end machine for cleaning glass bottles., Additional title: Bottle washing machine, Capacity: 3000 bottles/h, Length: 4,43 m, Width: 2,60 m, Height: 2,52 m, Base construction: Single-end machine, Features: Feed table; bottle feed; pressure filter; side window; heat exchanger; overflow pump; lye pump; water pumps; temperature gauges; control cabinet with control panel

Glass bottle filling system for hot filling smoothies. Consisting of the following components: - Unpacking table - bottle rinser - Vacuum filler (with 24 filling valves, Nagema, 1984, type ‘VW 24/1’) - Flash pasteuriser (KZE) - Pressure tank - Capper (Marchesini, type ML667) - Lid sorter - Tunnel cooler - Blower - Lid inspection (BBull CIS) - Labeller (Anker, 1999, type ‘Roland 10/4’) - Packing table - Conveyors - Control panel - Cooling tower - Steam boiler - Water softening (Lohbeck GmbH, Softtrol CD double system), Additional title: hot filling, with pasteurisation, Capacity: 5000 bo/h, Formats: 0.25 liter bottles, twist off caps, Features: Unpacking table, rinser, vacuum filler, flash pasteuriser, pressure tank, capper, lid sorter, tunnel cooler, lid blow-off, lid inspection, labeller, packing table, conveyors, control panel, cooling tower, steam boiler

Bottling line with a capacity of 30,000 bottles per hour. It uses 0.33 litre Vichy, 0.33 litre Euro, 0.35 litre lemonade and 0.5 litre NRW non-returnable and returnable bottles. It is also possible to pack 6-carton bottle carriers for 0.5 litre bottles in bottle crates. The removal of old cartons and the insertion of new cartons from/into the quill boxes is done by hand. The bottles are inserted by the packer. The system consists of the following machines / components: - Depalletising and palletising system Manufacturer: Radenska & Steinle - Foreign crate detection and sorting system Manufacturer: Syscona - Unpacker Manufacturer: SZA Federspiel - New glass lifter Manufacturer: Steinle Fördertechnik - Uncapper Manufacturer: Rink - Bottle washing machine Manufacturer: Krones - Crate washer - Bottle inspector Manufacturer: Krones - Beer preheater Manufacturer: Fischer - Bottle filler Manuf ...

Bottle level control, Current: up to 1,5 kW/power supply, Voltage: 220/110 V, Frequency: 50/60 Hz, Length: 420 mm, Width: 350 mm, Height: 720 mm

Carousel for sealing swing-top bottles., Capacity: 18000 bottles/h, Features: Height adjustment, control device for closing pressure, mechanical / pneumatic testing of shackle tension, high-pressure injection device, rinsing and swelling device

New bottle depalletiser on two levels. This new bottle skimming machine is a depalletiser with lifting frame in single-mast design. The mast is fitted with guide rails to support the vertically moving, roller-guided frame. The transfer device is attached to the lifting frame. The bottles are discharged in the upper area. The infeed and outfeed of the pallet transport is located under the transfer device. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: Depalletiser with lifting frame, Capacity: 140 layer/h, Power: 8,75 kW, Voltage: 230/400 Volt, Frequency: 50 Hz, Compressed air: 5,0 bar; 8,0 Nm³/h, Length: 4020 mm, Width: 3400 mm, Height: 5425 mm, Weight: 3800 kg, Formats: europalett (1200 x 800 x 140 mm), Operation / Control: control box / Siemens S7, Material: Painted mild steel, Position: free standing ...

Additional title: crate packer, Capacity for plastic crates: 500 cycles/h , Power: 11 kW active power/ 15 kVA apparent power, Voltage: 230/400 V ± 5 %, Frequency: 50 Hz ± 2 %, Length: 4170 mm, Width: 2550 mm, Height: 2650 mm, Weight: 4300 kg, Formats: Max. height: product: 360 mmm, plastic crate: 380 mm, cardbord box: 500 mm, Features: 2 heads à 20/24 bottles, construction with T-flange table quick hitch, only work with glas bottles, incl. filled crate inspector, Krones Checkmat

Inspection system for detecting damaged and soiled bottles., Additional title: Residual liquid, bottom, mouth, sidewall control, Capacity: 32000 bottles/h, Power: 3,6 kW, Voltage: 400 V, Frequency: 50/60 Hz, Compressed air: min. 6 - max. 10 bar, Length: 2,5 m, Width: 1 m, Height: 2,5 m, Weight: 1700 kg, Formats: Longneck-, Steini-, Vichy- 0,33 l bottles / 0,5 Longneck-, NRW- 0,5 l bottles, Running direction: right-left, Operation / Control: Heuft, Features: residual liquid, bottom, body, mouth, side wall

Single-end bottle washer. Factory overhauled in 2005., Additional title: one end machine, Nominal capacity: 6700 bo/h, Control range: 7370 bo/h, Number of bottle cells: 1620 pcs., Number of bottle cells per row: 10 pcs., Length: 7790 mm, Width: 3450 mm, Height: 2950 mm, Weight: 20000 kg, Machine partitioning: Chain division 150 mm, cell division 110 mm, Operation / Control: Siemens S 5, Material: Stainless steel, Position: Free-standing on spherical feet, Base construction: Housing in one-piece block design, Features: Bottle insertion and removal finger system, chemical dosing stations with dosing pumps, format parts for inlet and outlet

Bottle washing machine Nagema GM Arcade Year of construction 1993 Output 23,000 bph, Additional title: Single-ended machine, Capacity: 21000 bo/h, Bottles each row: 16 bo/row, Length: 8,64 m, Width: 4,47 m, Height: 1,92 m, Weight: 17900 kg, Formats: 0,5 l NRW-Bottle, Features: Heated by steam; smoke suction; insertion sieves; caustic settling tank , Periphery: S5 controll (HMI Lauer)

Inspection machine for checking empty glass bottles prior to filling. The base, sides and neck of the bottle are inspected. Bottles containing residual detergent from the cleaning process are also detected. An additional inspection unit is positioned upstream of the main inspector, which screens out foreign and defective bottles in advance. The inspection criteria are recorded using cameras as well as RF and IR technology., Additional title: Empty bottle control, Capacity filline line: 12000 bo/h, Current: 6 A, Voltage: 400 / 230 V, Frequency: 50 Hz, Running direction: left -> right, Operation / Control: Simatic S7, Position: in a footed housing, Base construction: straight-running, Features: Control and display panel, housing with safety doors, bottle discharge

Full crate inspection system for PETCYCLE crates, with 20x0.5 l, 9x1.0 l, 6x1,0 l and 6x1.5 l bottles., Additional title: Full crate inspection system, Capacity: 4000 crates/h, Formats: 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l and 6 x 1,5 l-PET-bottles, Material: Stainless steel housing, Position: free standing, Base construction: Box on tubular feet, Features: Conveyor belt, 1 housing with measuring electronics, 1 housing with electronics/operator touch

Bottle washing machine (with chemical dosing) Manufacturer: Krones Model: Lavatec Kes Year of manufacture: 2000 Performance: 39,000 bottles/h, Additional title: Bottle washing machine, Capacity: 39000 Bottles/h, Length: 12700 mm, Width: 4700 mm, Height: 3500 mm, Formats: 0,33 l Vichy, 0,33 l Euro, 0,35 l Lemonade, and 0,5 l NRW, Operation / Control: Simatic S7-300, Position: free standing, Base construction: Single-end machine, self-supporting housing on dome feet, Features: H2 extraction, label press, bottle tables, ladders, walk-on platforms, various spare parts, another 400 baskets of 22 bottles each Concentrate dosing station, Layer patterns: 22 bottles per basket row

Combined rinser and filler for 0.5 litre, 1.0 litre and 1.5 litre PET bottles. Output: 24,000 bottles/h A chlorine dioxide dosing unit and a sterile water supply are connected to the rinser. The filler is equipped with a screw capper. The filling quantity is controlled via flow measurement. Liquid nitrogen dosing is possible via a mobile system., Additional title: PET bottle sanitising and filling system, Capacity: 24000 b/h , Formats: 0,5 l, 1,0 l und 1,5 l PET-bottles, Running direction: left -> right, Operation / Control: Touch-Panel / Simatic S 7, Material: mainly stainless steel, Position: free standing, Features: Stainless steel enclosure, plexiglass protective screen opening upwards; 70 rinsing valves on the rinser; 80 filling valves; filling quantity recording via IDM; Alcoa capper 28 mm Bericap; Prominent chlorine dioxide dosing; filtration system for sterile water, mobile liqui ...

Heuft empty bottle inspector with: - Infeed inspection with belt stop - Bottom inspection - Mouth inspection - IR residual liquid detection - HF residual liquid detection - Simple lateral migration detection in the outlet - Single-segment rejection with rejection control, Additional title: Bottle inspection machine, Capacity: 8000 bottles/h, Voltage: 400 Volt, Frequency: 50/60 Hertz, Compressed air: min. 5 bar, Length: 2030 cm, Width: 950 cm, Height: 1830+conveyor height cm, Weight: 1600 kg, Running direction: from right to left, Operation / Control: Heuft Spectrum reflexx, Heuft speedy environment control for controlling the motors, Position: free standing, Periphery: Synchronised container transport segments after the inspector

miho fill level detector for detecting underfilled or overfilled bottles, as well as for cap detection. The device works with a high-frequency alternating voltage., Additional title: Fill level inspection system, Capacity: 24000 b/h, Operation / Control: at control box, Material: Painted steel / stainless steel, Position: free-standing / mounted on bottle transport, Base construction: Housing with evaluation electronics with tubular frame on spherical feet, Features: Measuring device, control electronics, bottle ejector

Glass bottle filling line for beer and non-alcoholic beverages for filling 9000 bph. Includes: - De-capper: JOHA type Smaragt, built in 1990, with one unscrewing head - Bottle unpacker: JOHA type E100, built in 1978, with one packing head - Crate washer: JOHA type KA2N, built in 1983 - Bottle washer Pirzer, built in 1983, with 19 bottle racks per row - Empty bottle inspector: Inex type Optiscan 4s - Bottle filler and capper: Krones type 28/7, built in 1975, with 28 filling valves and 7 capping stations - Capper: Adelski, with 4 capping stations - Labelling machine: Pirzer, built in 1979, for belly and neck labels, with 8 labelling stations - Bottle packer: JOHA type A400 Q, built in 1977, with one packing head, Additional title: Years of manufacture: 1975 - 1990, Capacity: 9000 bottles/h, Formats: 0,5 l Euro bottle; crown cap; screw cap; 20x0,5 l beverage crate, Features: De-capper; de-c ...

Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement), Crushing capacity: 6000 b/h, Current: 6,5 A, Voltage: 380 V, Frequency: 50 Hz, Length: 15220 mm, Width: 1300 mm, Height: 22600 mm, Weight: 700 kg, Base construction: on dome feet, Features: Fragment tub, noise protection box, slot for manual disposal of single bottles

Krones Prontomatic labelling machine, type 12-6/6-4, For labelling crown-capped bottles in 0.5-litre and 0.33-litre sizes, as well as swing-top bottles in 0.5-litre and 0.58-litre sizes. Disposable crown-capped bottles in 0.33-litre sizes can also be labelled., Capacity: 13500 bph Swing-top label, Voltage: 400 V, Frequency: 50 Hz, Length: 2450 mm, Width: 2000 mm, Height: 2500 mm, Formats: Crown cap returnables: 0,33l, 0,5l NRW; crown cap one-way: 0,33l; swing-top: 0,5l, 0,58l, Machine partitioning: 180mm, Running direction: Right - left, Operation / Control: Simatic S7-300

The VP 800 bottle packer and depacker is designed for automatic operation within the beverage industry., Additional title: Linear set packer, Capacity: 600 crates/h 10 strokes/min., Power: 5,5 kW, Current: 10 A, Voltage: 400 V, Frequency: 50 Hz, Length: 3000 mm, Width: 1540 mm, Height: 2600 mm, Weight: 1100 kg, Formats: 24 x 0,33 L Vichy, Running direction: Right-left, Operation / Control: Simatic S7-99, Base construction: Frame, height-adjustable, Features: approx. 3 m bottle outlet; approx. 5,5 m crate inlet; approx. 4,5 m crate outlet

This bottle crusher from HEIN Lärmschutztechnik GmbH efficiently crushes bottles by pressing and offers high crushing performance and significant volume reduction. Its compact and robust design ensures low wear, quiet operation (85/87 dB(Ai)), and splinter protection, making it ideal for busy production environments. The system has a manual capacity of 2,400 bottles per hour and operates at 380 V / 50 Hz, 6.5 A. It stands on ball feet and has a fragment container and a noise protection box, while its compact dimensions (1.45 m × 1.20 m × 1.85 m) mean it requires little space. The machine weighs 900 kg and offers stability and durability in daily operation. At a glance: Crushes bottles by pressing them. - high crushing capacity - high volume reduction - accident-proof (splinter-proof) - low noise [85/87 dB(Ai)] - low wear rate - compact design (minimum space requirement) Our team at VB ...

Bottle ejector for removing empty PET bottles from PETCYCLE crates, with attached upward turner., Additional title: PET bottle ejection system, Capacity: 4000 crates/h, Power: 2,8 kW, Current: 8 A, Voltage: 400 V, Frequency: 50 Hz, Compressed air: 6 bar, 1 m³/h, Length: 3000 mm, Width: 1910 mm, Height: 3830 mm, Weight: 2500 kg, Formats: PETCYCLE 20 x 0,5 l, 9 x 1,0 l, 6 x 1,0 l, 6 x 1,5 l, Operation / Control: Simatic S7-300, Material: stainless steel, Position: free standing, Base construction: Stainless steel square tube construction on spherical feet, Features: Infeed or upward turner with protective grid, crate transport, crate guide, bottle ejector, switch cabinet, protective housing with plexiglass panes, staircase and operating platform with railing

PET bottle air conveyor over 2 floors, used for 0.5 l, 1.0 l and 1.5 l bottles. Length approx. 50 m. Our team at VBW Asset Trade will be happy to answer your questions. Send us an inquiry or simply give us a call!, Additional title: PET bottle conveyor system, Capacity: 24000 b/h, Formats: 0,5, 1,0 l und 1,5 l PET-bottles, Material: mainly stainless steel, Position: free-standing on the floor / suspended from the ceiling, Features: Bottle transport channel with bottle guides, with 2 x 360° and additional curves, with a 15° incline and horizontal run, 5 frequency-controlled blower motors

Conveyor belts for PET bottles, with 1-lane hinged belt chain and 6 lanes. Capacity: 24,000 bottles/hour, Additional title: Free bottle conveyors, Capacity: 24000 b/h, Free bottle transport approx.: 30 m, 90° bottle transport curves: 1 piece 1-chain conveyor, 180° bottle transport curve: 1 piece 6-chain conveyor, Formats: PET-bottles in 0,5 l, 1,0 l, 1,5 l, Operation / Control: controlbox / Siemens S7-300, Material: mainly stainless steel, Position: free-standing, Features: Conveyor frames, deflection stations, drives, frequency controls, electrical switchgear, automatic belt lubrication

Overview  The empty bottle inspector was built in 2004 by the German manufacturer Krones. It is installed in a mineral water company in Germany. On the line, where it is installed, the owner also does contract bottling. Therefore it has many detections and formats available. Technical details  Output: up tp 50,000 bph Last used for:  0,25 l Vichy bottle 0,5l Set 1 0,5l Set 2 0,5l Set 3 0,7l GDB 0,75l GDB Inspection modules Bottom inspection camera Sealing surface inspection camera Thread inspection camera with cone optics Side wall inspection camera Contour detection and color detection with camera Accessories/scope of delivery    Ejector some spare parts available some conveyors