129,230 used machines on RESALE, but how to find them? Machine Search
Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Frequency converter: dimensions 550/480/H260 mm -Vibrating bottle: length 450 mm -Hose length: 10 m -Weight: 98 kg
Converters for bottle vibrators, vibrating bottles, internal vibrators, concrete vibrators -Manufacturer: Wacker -Handover: as is as seen -Carriage: Impeller damaged, see photo -Motor: 2 kW -Vibrating bottle: length 430 mm -Hose length: 6 m -Dimensions: 1380/580/H600 mm -Weight: 87 kg
Manufacturer: KRONES Type: K405-xxx Model: 960-16-5-5 YOB: 2003 Performance: 16,000 bottles/hour Running direction: RM clockwise feeding: linear - straight Aggregates: Agg 1 PWL460, AGG 2 PWL 300, AGG 3 donation unit Bottle table: servo Guiding: 1 x retaining infeed starwheel, 1 x discharge retaining starwheel Voltage: 230/400 V Electricity: 3PH/PEN Nominal frequency: 50 Hz Control voltage: 24 V Label: Body, back, wrap around Machine dimension: L = 3, 00 m x W = 2, 20 m without partly overlapping of the unit and discharge extension.
Generator, generator, emergency generator -Power: 1.5 kVA 200 Hz -for: vibrating bottle -Sachs two-stroke engine: 4000 rpm 2.57 kW -Dimensions: 570/385/H530 mm -Weight: 51 kg
1 of used level detector for bottles, make Heuft, type Basic HF-LT, new 2005. Over-/under-fill detection via high-frequency, optical closure and excessive closure height detection, "mono" pneumatic rejector, encoder. Rated at 22.000 bph.
J Kugler filling line, that has been dismantled about half a year ago from the production it has been running in. The machine is now dismantled and in our warehouse safely storaged. With this you get a complete filling line with a filling machine, a lid applicator, a capper and a label machine. The filling line has been running at Novartis in their German department, so all the machines are very well kept and serviced. Novartis have been running 1000 ml products with a lid”, a cap on the top and a label on the side. They have been running 20 products per minute = 1.200 products per hour. The filling line is from 1990 and has been running at Novartis from when it was new. The filling line is complete with a rotary infeed table, 1 headed piston filler with lotion lube pump, lid applicator, cap applicator, label machine and an End of Line Production Systech Display Monitor” to co ...
Bottle cleaning machine One end Manufacturer: SEN, KHS Type: Riwella VB 12/11-2, Built: 1987, Power: 5700 Fl/h, Bottle size: 55- 92 mm, length 170- 360 mm. Overhauled, with warranty
Pressure Bottle Filler. 24 fillers. System FALSCH FLASCHEN. Whole machine made in inox. Machine after total renovation in 2019. Warranty: 24 months.
GAI vacuum filler + 1 screwdriver head Capacity: 18,000 b / h - 20 ml, 12 fillers
Pressure filler SEITZ TIRAX SF12 For normal and sterile filling of still and carbonated liquids at a filling pressure of up to 5 bar and for hot filling. Operating pressure: 5 bar 12 digits infinitely adjustable Capacity approx: 300 to max. 800 bottles/h Dimensions and weight: H x W x D: 2400 x 940 x 1120 mm Weight: 615 kg Operating instructions and spare parts list available!
Air bellows, roller bellows, air cushions, spring-loaded brake -Gas bottle holder -for: 33.5/43.5 Lbs -Hole spacing: 115/75 mm -Weight: 3.2 kg
New machine! Max. Speed: 120 (Max. BPM.) Need to match the thickness of the film. Applicable Lable Thickness: 0.05 - 0.07 (m/m) Applicable Lable Lay Flat Width: 40 - 150 (m/m) Applicable Lable Cut Length: 25 - 50 (m/m) Air Pressure: 5.5 (80 psi) Applicable Products Shape: Round, Square, Oval & Others Applicable Material: PVC, PET, OPS, PLA Machine Dimension LхWхH: 1130 x 1000 x 1620 mm Power: 1Ø 220V 50/60HZ - HMI control system help worker operate machine & change size easily. - Single cutting knife cut shrink band without dog ear. - Shrink band apply to cap by sucker; it is good to work with wide cap container. - Single phase power is required, easy & convenient. - Door Interlocks safety feature protecting worker from injury.
Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley: galvanized version -Tires: solid rubber -Number: 1 piece car available -Price: per piece -External dimensions: 730/520/H1325 mm -Own weight: 26 kg
capacity: up to 11,000 bottles/h suitable for 0.2 to 1.0 ltr. bottles year of manufacturing: 1990 partly dismantled for reconditioning
PET Empty Bottle Inspector HEUFT InLine TI 60 BFS2-r Device No. 2SG021663 Built: / year of construction: 2006 Output[B/h]: / performance [cont./h]: 36,000 Flow direction of: / moving direction from: Direction: / rejection direction: Installation location: / installation site: In front of the filler • Basic unit: Empty bottle inspector • Inspection: 1.Soil-IN-r • Inspection: Estuary IN-r • Inspection: 1st sidewall IN-r • Inspection: 2nd sidewall IN-r • Inspection: SW double resolution-r • Inspection: Carrying ring/PET-r • Inspection: RefPet abrasion-r • Inspection: RefPet Ventslot-r • Inspection: Stress crack detection-r • Accessories Transport belt: Height adjustable • Residual fluid detection: IR • Height adjustment: for discharge • Cross-adjustment: for discharge • Discharge ...
1 used Framax Tribloc bottle filler, built in 2012, consisting of Borelli 9-digit rinser and 8-digit low vacuum / gravity filler type CIAO-xp with 1-digit Arol Eagle C 26 mm crown corker. Plant last used for filling beer (bottle fermentation) in 61 mm diameter 330 ml as well as 71 mm diameter 500 ml glass bottles at an output of 1,920 bottles/hour. Filler also suitable for bottling wine.
Gas bottle cart, gas bottle cart, steel bottle cart -Transport trolley -Tires: PU tires puncture-proof 260x85mm -Number: 1 piece car available -Price: per piece -External dimensions: 730/500/H1150 mm -Own weight: 17.5 kg
Crane block, crane hook, load hook pulley, rope pulley, steel rope pulley, rope pulley, crane -Payload: 1000 kg -Dimensions: 450/210/H90 mm -Own weight: 9 kg
Frequency converter, frequency transformer, converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 5 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H740 mm -Weight: 88 kg
1 of used Framax tribloc bottling machine, new 2012, consisting of a Borelli 9-head rinser / 8-head low-vacuum/gravity filler CIAO-xp with single-head Arol Eagle C 26 mm crowner, Last running bottle-conditioned beer at 1.920 bph with handling parts for 61 mm diameter 330 ml and 71 mm diameter 500 ml glass beer bottles. Filler also ideally suitable for bottling wine.
Frequency converters, frequency converters, converters for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Power: 2.8 kW -Output: 42 V -Frequency: 200 Hz -Dimensions: 1160/600/H720 mm -Weight: 74 kg
used
SLEEVE APPLICATOR CLEVER GS 602. performance on PET/Glass bottles: 45000 b/h : 0,4-0,5 L 24000 b/h : 1,5 L 22000 b/h : 2 L
Sidel Flexible SL90 F8564T/Sm with Cold Glue 8/8/130 S3/E3 Equipped with 3 Cold Glue Modules for front and back body and neck labels on round glass bottles. Bottle min/max height: 150 / 350 mm Bottle min/max diameter: 50 / 100mm Label min/max height: 20 / 120 mm Label min/max length: 20 / 130 mm Speed- Machine will run comfortably 36,000 BPH @ 330ml on Cold Glue . (max speed 72,000)
Complete PET Soft Drinks Filling Line for sale by Indassol 1.5 Litre & 2 Litre Concentrated Soft Drinks (non-carbonated) 16,000 - 18,000 bph, Blowing - Filling - Packaging Krones, Krupp, Procomac, Zalkin, Alfa Rollquatro, Hueft, Kisters, Newtec Palletiser (1 Litre Filling Line also available) PLEASE NOTE Both Lines were used by Princes Soft Drinks for the production of Non-carbonated Concentrated Soft Drinks. The Krones Fillers on both Lines are Counter Pressure Fillers and the Lines could be adapted to produce Carbonated Soft Drinks by the addition of a Carbonation Unit to the process plant. ADDITIONAL ITEMS AVAILABLE 2 off Bellis & Morcom High Pressure 40 Bar Compressors. Machines are from 1987 but have been subject to a full Service Agreement with Gardner Denver. Lachenmeier H-Multi Flex Pallet Wrapper/Hooder (shared with Line D6) Serial No. 39031 (2 ...
Crane block, deflection pulley, cable pulley, steel cable pulley, cable deflection pulley, crane, block and tackle -Crane block: with guide rails -Rollers: Ø 350 mm / 4 grooves -Number: 8x pulley available -Price/delivery: per piece -Transport dimensions: 650/330/H350 mm -Weight: 50 kg/pc.
Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 4500 kg -Dimensions: 760/550/255 mm -Own weight: 71 kg
Crane block, crane hook, load hook, single hook, lower block -Manufacturer: Verlinde, Crane hook: Crane hook type FEM 3 m -Load capacity: 3.2 t -Dimensions: 600/280/135 mm -Weight: 30 kg
This pharmaceutical grade bottle washing machine has been designed to meet the needs of the most demanding customers and to comply with international standards in order to provide high level performance along with easy access to components, all in a small footprint. This rotary washing system was developed and designed keeping in mind the high level of cleanliness required in the pharmaceutical industry. High washing and rinsing performance. Small footprint, size and utility consumption. The washing chamber is made entirely of stainless steel and is surrounded by a Plexiglass cover. Presence of an electrical panel for easy control management.
Used filling line for glass bottles, capacity 0.33 - 1 l. Line description: - 4XP25 packing machine with the following parameters: - stepless adjustment range - 3500- 8200 b / h, and 5300-12300 b / h - maximum capacity for sparkling water with 6g / l CO2 and temperature 235oK / 11500 g / h for bottles. 0.33l; 5000 g / h for the cylinder 1.0l / - installed power - 2.2 kW 380 V - CO2 consumption - 40 kg / h - pressure of CO2 or sterile air in the tank higher than the fluid pressure by 0.150 MPa - air consumption - approx. 13 m2 / h - air pressure - 0.5 MPa - number of nozzles - 36 pcs. - number of closing heads - 8 pcs. - noize - 90 dB / A - overall dimensions: width - 2895 mm; length - 2125 mm; max height - 2530 mm; curb weight - 5100 kg - service - 1 person
with 12 bottles/row cell pitch: 110 mm capacity: approx. 2,000 - 2,500 fl./h Oil-direct heated including oil burner
Filler block, Fabr. Nagema, Type: Varifill 40/10K/10PP Capacity: 12,000 Fl/h, run on 0.33 lt longneck and 0.5 lt NRW bottles 40 filling valves 10-digit crown cork 10-digit screw capper (for MCA 28 closures), double pre-evacuation, Running direction: left -> right YOC 1994 L: 4,000 mm, W: 2,700 mm, H: 2,800 mm Price on request
Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 2 t -Rope groove: Ø 10 to 14 mm -Dimensions: 450/180/90 mm -Own weight: 8.5 kg
1 of used bottling line for beer, consisting of loading table, Harlands Proteus single-station wrap-around pressure-sensitive labeller, Moravek BF15 sterile filter, Moravek BC15 carbonator, Moravek 12/12/1 rinser / filler / crowner, Linx CJ-400 ink-jet coder, Cheops tray/pad loader with shrink-wrapper, interconnecting conveyors. Used for 330 ml (D 60.7 x H 227 mm), speed 2.500 - 3.000 bph, and 500 ml (D 69 x H 245 mm) speed 2.200 - 2.500 bph, packed as either 4x2=8 or 6x4=24 bottles per tray or pad. Equipment new 2015.
Crane block, crane hook, load hook, single hook, bottom block -Crane hook: Crane hook load capacity 5 t -Rope groove: Ø up to 22 mm / see photos -Dimensions: 630/297/130 mm -Own weight: 32.6 kg
Bottle washing machine, Fabr. Krones, type: Lavatec KESK 245/17-120, control range 4,000 - 11,000 fl/h, for bottles with max Ø 105mm, built in 2002, Eind machine, with 180 rows of 17 bottles/row each, with pre-soft water and lye, main liquor with immersion switch and after-liquor spraying, 3 water sprays hot, cold and fresh water in stock from May!
Bottle washer PAC / Switzerland Type CB 12 Eind 8,000 fl./h 0.25 to 0.50 L glass bottle Year of construction 1997 FILM AVAILABLE - PLEASE REQUEST Further information and price on request
Bottling line KP 2010 Automatic bottling line for bottles. Filling up to 2 liters 6-head filling Speed + 3000 bottles / hour depending on bottle size and product Material stainless steel Lightweight construction, wheels underneath, easy to move Conveyor slatband type, length 4 meters Gutter under the conveyor Electricity 380 v. Compressed air: 6 bar
Crane block, crane hook, load hook, single hook, bottom block -Crane block: Crane hook load capacity t -Rope groove: see photos -Dimensions: 420/170/90 mm -Own weight: 6.3 kg
Crane block, crane hook, load hook, single hook, bottom block -Cover: Lid for crane bottle 2 pieces / = 1 set -Type: unfortunately without type designation -Bore: Ø 50 mm -Quantity: 2 sets available -Price: per set -Transport dimensions: Ø 278 x 60 mm -Weight: 2.8 kg
- Converter for bottle vibrators, vibrating bottles, internal vibrators -Frequency converter -Vibrating bottles: 2 -Cable length: 6m each -Weight: 100 kg
- Converter for bottle vibrators, vibrating bottles, internal vibrators -Engine: Hatz diesel -Frequency converter: -Vibration bottles: 2 pieces 1x vibrating bottle Ø 60 x 450 mm 1x vibrating bottle Ø 50 x 450 mm -Cable length: 6 m each -Dimensions: 1550/800/H1150 mm -Weight: 220 kg
-Manufacturer: TESSA -Capacity: 1500 Btls/h -Filling Machines - Two Pcs -Labeling device ( Self- adhesive labels) -Shrink tunnel -Set of conveyers -PET Bottles blowing machine -Mold for blowing PET bottles 1 l -Mold for blowing PET bottles 0.5 l
Bottle washer, make Krones, type: Lavatec KES 245-26-080, for 39.000 bph, control range 15.000-46.000 bph, 26 bottles/row, with 80mm cell pitch, 110mm chain pitch, with SPS Siemens S7 control, width: 4.745 mm, length: 11.283 mm.
Bottle washer, make Krones / Zierk, type: KES-2-2-245/22-95, for 24.000 bph, with 22 bottle row, with "Schleicher"-control, built 1992, 10500mm x 3750mm x 3100mm, Weight: 42 to.
Bottle washer, MAG, 10 bottles / row, with 80 mm plastic cells, built in 1991
Bottle washer, make O+H, type: Contitact, for 12,300 fl/h, with 80 mm bottle cells, built 1987
Bottle washer, make Klinger, type: Superserpende 16/0,5 Liter, for 10.400 bph nominal capacity, 16 bottles/row, with 85 mm bottle cells, runs on 0,5 lt and 0,33 lt bottles, with Siemens S5 control, can still be seen in operation.
maximum number of results exceeded
please refine your search
10 € 
