bottle rinser machine used for sale

Key data: 500 mm, 400 mm, 400 mm

Deckel FP 4M Active with 3-axis active digital display, Year of manufacture 1996 Table clamping area 800 x 460 mm Travel X / Y / Z 500 / 400 / 400mm Spindle speed 50 - 2500 rpm Feed rate 8 - 630 mm/min Rapid traverse 1500 mm/min Quill stroke 90 mm Tool holder SK 40 Hydraulic Tool Clamp Very good condition!

Specifications Manufacturer Benhil Model 8311 Junior Condition Used Type of Machine Butter Packaging Machine Capacity ± 600 Kg/h Capacity (Units) up to 40 packages per minute Packaging Weight 250 gram Packaging Size 100 x 75 x 35 mm (German standard) Packaging type Bottom folding Motor power 1,5 kW Weight ± 840 kg Description Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 40 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. The machine is equiped with a later build on photocell on the paper infeed, to control the exact position of the print on the foil. Outfeed conveyor.

Specifications Manufacturer Benhil Model 8312 Junior Year 1977 Condition Used Serial Number 312/57 Type of Machine Butter Packaging Machine Capacity ± 750 Kg/h Capacity (Units) up to 50 packages per minute Packaging Weight 250 gram Packaging Size 100 x 75 x 35 mm (German standard) Packaging type Bottom folding Motor power 2,2 kW Dimensions 300 x 170 x 200 cm Weight ± 1.275 kg Description Foil wrapping machine which can be used for packing products butter, lard, margarine, tvorog or cottage cheese into aluminium foil or parchment paper. This machine is in a reasonable mechanical and electrical condition (renewed by Schuy, auftr. nr: 13632-01). The format on the machine is Standard size: 250 gram, 100 x 75 x 35 mm, bottom folding. Capacity: up to 50 portions per minute. The butter is feed with an aluminium through with aluminium augers. Aluminium dosing station. T ...

A Trumpf CNC CO2 laser cutting system including Loadmaster is available. Laser sources: 2, laser power: 2x3200W, working range X/Y: 7000mm/2500mm, max. sheet thickness mild steel/stainless steel/aluminum: 20mm/15mm/10mm, max. traversing speed: 215m/min. Machine dimensions X/Y/Z: approx. 9000mm/4500mm/2500mm, weight: approx. 11600kg. Documentation available. On-site inspection is possible.

x-travel: 450 mm y-travel: 300 mm z-travel: 350 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m 3-axes digital read out horizontal and vertical milling spindle quill Technische Daten / technical details: Längsweg X / X-travel longitudinal 450 mm Querweg Y / Y-travel cross 300 mm Senkrechtweg Z / Z-travel vertical 350 mm Tischgröße / table size 800x400 mm Spindelaufnahme / spindle taper SK40 Drehzahlbereich / spindle speed 50-2500 UpM /rpm Vorschubbereich / feed range 8-400 mm/min. Antriebsleistung / power capacity 3,2 kW Gewicht der Maschine / weight 1500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

A drum melter SM Klebetechnik for melting and conveying hot melt adhesives from 200 liter drums is available. Power: 20kW, max. operating temperature: 180°C, temperature accuracy: +/-1°C, temperature sensor: PT-100, pump capacity: 320kg/h, drum volume: 200l, filling heads: 2, machine dimensions X/Y/Z: approx. 1900mm/850mm/2800mm, weight: approx. 650kg, control: Siemens Simatic S7-1200, operating hours: 87h, pump hours: 15h. Documentation available. On-site inspection is possible.

Copy cutter Helma Type: CF 40 Machine No. 7825 Table dimensions 700 x 1120 mm Diameter of the 2 working spindles 30 mm Working spindle speed 10500 rpm max. milling height 100 mm Vertical adjustment of the cutter heads or milling cutters for profile correction 10 mm max. distance between the spindles from center to center 450 mm Distance between feed shafts from center to center 235 mm Spindle motors 2 x 5.5 kW Feed motor 0.37 kW Feed speeds 1.8 – 10 m/min. infinitely variable Air consumption max. 20 l/min. Net weight of the machine 900 kg

Inv. Num. : 8511 Type: J100ADS-180U 45 Producer: JSW Created: 2023 Parameters: Total number of injections: 6800 Operating hours: 60 h Panel dimensions: 630 x 630 mm Clamping force: 1000 kN Screw diameter: 45 mm Injection capacity: 223 cc Injection mass: 203 g Maximum distance between mounting plates: 910 mm Distance between uprights (horizontal): 460 mm Distance between uprights (vertical): 460 mm Maximum spray pressure: 157 MPa Opening of the mold: 360 mm Max. speed: 400 mm Machine length: 4950 mm Machine width: 1230 mm Machine height: 1670 mm Injection weight: 4600 kg Equipment: Manual Spares 1x SHINI SAL-3U-CE Suction Device 1x SHINI Vacuum Aspirator Molecular Dryer SSD120U-80H SHINI STM-607-W-CE Temperature Controller SHINI SIC-7.5A-R2 Cooling Unit Double dosing of SHINI SCM dye

BERNARDO Variomill FU 2000E Servo universal milling machine was built in 2020 in Austria by PWA Handelsgesellschaft m.b.H. The machine, distinguished by its stable design made of grey cast iron and the use of modern technologies, is the perfect choice for machining heavy, oversized workpieces. All linear axes are driven by high-performance servo motors, which guarantee appropriate accelerations and feed rates in each direction. What’s more, the X axis has been coated with a special Turcite B coating to reduce the effect of slippage. All of this, combined with extensive equipment, maximises the precision and repeatability of the produced parts, even during the most intense challenges. The Variomill FU 2000E Servo vertical milling machine weighs 4500 kg. Technical specifications of the BERNARDO Variomill FU 2000E Servo milling machine - feed in the X/Y/Z axis: 1400/700/500 mm - rapi ...

Inv. Num. : 8515 Type: HS 3001 Producer: MicroStep Created: 2007 Parameters: Software: Asper 5.0 - Basic Switch-on hours: 16300 h Operating hours: 4400 h Work table length: 3000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 25 mm Maximum sheet thickness when cutting (stainless steel): 20 mm Maximum sheet thickness when cutting (aluminium): 20 mm Plasma Source: Hypertherm HPR 130/A Equipment: Technical documentation Filtration Vanterm PL-8000 (7.5 kW) New PC (2022) with Windows 10

Inv. Num. : 8517 Type: DS 6001.20PrkBk AF M Producer: MicroStep Created: 2018 Parameters: Control System: iMSNC Software: AsperWin Basic (2018) Switch-on hours: 12800 h Operating hours: 3400 h Work table length: 6000 mm Work table width: 2000 mm Maximum sheet thickness when cutting: 50 mm Maximum sheet thickness when cutting (stainless steel): 6 mm Maximum sheet thickness when cutting (aluminium): 6 mm Plasma Source: XPR300/A Core Machine height: 2630 mm Machine length: 16735 mm Machine width: 9260 mm Machine weight: 22180 kg Equipment: Technical documentation Drilling unit Wittur DSF 4-19.3-20I. R3-GBL (26 kW) Filtration DFPRO-8 ART501 (11 kW) Automatic loader with suction cups Positioning gripper on the X-side Roller conveyors at the inlet and outlet Conveyor belt at the small parts outlet Automatic calibration of tool geometry for rota ...

Machine in standard version for automatic sharpening of straight knives in the planing head - Planer head diameter min. 85 mm to max. 225 mm - Tool length max. 330 mm (table stroke 440 mm) - Number of cutting edges arbitrary - Free angle infinitely adjustable 15° - 35° - Grinding spindle speed n=4,000 rpm. - Grinding wheel D=125 mm, bore d=20 mm - Grinding motor 1.1 KW, n=2,850 rpm. - Feed motor 0.053 KW, n=1,300 rpm - Grinding speed 650 mm/min. - Partial motor 0.033 KW, n=1,300 rpm. - Freely selectable grinding circuits per tool 1 - 5 - Coolant pump motor 0.065 KW, n=2,900 rpm. - Coolant / tank capacity approx. 115 litres - Mandrel (NEW) D=50 x 330 mm - Machine complete with accessories Machine dimensions: H=1200 mm, W=1,150 mm + D=820 mm / Weight approx. 450 KG Condition: Refurbished by qualified personnel, everything renewed and straightened, function tested, ...

RÖSLER R320 Euro rotary vibrator YOM 2017 Outer diameter max. 1350 mm Width of processing channel 325 mm Overall length of processing channel 3050 mm Machine height - upper edge of processing bowl 1210 mm Work piece discharge heigh 1150 mm Height of media unload plug 615 mm Connected load 3 kW Weight 920 kg

Key data: 4000 mm, 1560 mm, 32

CNC Gear Gringing machine HOFLER H4000 Year 1990 Maximum Workpiece Diameter 4000mm Gear Width 1560mm Module 3-32 Number of Teeth 12-768 Maximum Angle of Teeth 35 R/L Grad Pressure Angle 14-31 Degrees Table Diameter 1900mm Table Bore Diameter 750mm Maximum Workpiece Weight 35000kg Grinding Head Stroke 1600mm Ways hydrostatic Coolant, Filtration System Way Covers: rubber roll-up, metal telescopic and bellows neoprene Power 3 PH / 60 Hz / 230 – 460 V Equipped with: Reutlinger balancer Oil mist extraction system HOFLER TPF-40/1100 measuring machine Year: 1990 Max. Gear Diameter: 4000mm Both machines are in Excellent condition This machine was used to grind the gears for the US nuclear submarine transmissions (gearboxes). The machine was originally purchased new by General Electric for the Lynn Massachusetts Facility. We purchased it from them in excellent c ...

Vertical Flow Wrapper VPX250 + Servo Screw Dosing SDX Rovema VPX 250/400 flow-wrapping machine, overhauled, incl. repainting RAL 9007, Siemens S7 machine control and operation Condition: very good Hours: 150 Availability: immediately Refurbished: 2021 Vertical Flow Wrapper VPX250 Machine equipped with sealing system for heat-sealable packaging materials (e.g. paper/bonding films 60-100μ), with e.g.: - Cross sealing jaws 270 mm - Corrugation cross sealing jaws horizontal 12.0 2.0 mm / to be determined by foil sample - Longitudinal seam sealing jaw 420 mm - Temperature controls via machine operation, incl. monitoring - Sealing temperatures are set via Siemens program and stored per program - New foil cutting blade, pneumatically controlled Capacity: flat tubular bags: up to a maximum of 80/min. Log bottom bags: up to a maximum of 55/min. Depending on bag format ...

Used grinding machine Vollmer CABG 50U – built in 1995 – Very good condition For sale is a fully automatic gang saw sharpening machine from the quality manufacturer Vollmer. The machine is in very good condition, is fully functional and can be used immediately. Ideal for sawmills or woodworking companies with regular sharpening needs. Specifications: Model: Vollmer CABG 50U Year of Make: 1995 Machine Type: Automatic Gang Saw Blade Sharpener Condition: Very good, regularly serviced Saw blade width: Up to approx. 200 mm Saw blade length: Up to approx. 1650 mm Rake angle adjustment: Approx. -10° to +25° Tooth pitch: Adjustable (depending on the type of saw blade) Abrasives: CBN or diamond grinding wheels Grinding cycle: Fully automatic incl. infeed and return Control: Electronic with program selection Cooling: Integrated coolant supply Connected load: 400 V / 50 Hz ...

GeneralUniversal Milling Centre - Direct Measuring System X, Y, Z inclusive air purge for measuring system - Coolant Air-Blast Changeover external switchable via M-Function - DMG MORI NETservice - RMS device (Relocation Machine Security); Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with60 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.12000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 80 bar with chip conveyorProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed and ATC ar ...

GeneralVertical Machining Centre - Direct Measuring System X, Y, Z - Coolant air-blast changeover external switchable via M-Function; - Thermal compensation - DMG MORI NETservice; Control: DMG MORI ERGOline X Multi-Touch control Siemens CharacteristicsMovement X / Y / Z800/600/510 mmType of magazineChain Tool Magazine with30 PositionsClamping SystemDIN 69872 Spindle taperSK 40 DIN 69871 Drive power (40% DC)20 kWDrive power (100% DC)14,5 kWSpeed max.15000 rpmRapid feed X / Y / Z42/42/42 m/minTable surfaceØ 800 x 620 mmMovement C-Axis360 degreeMovement B-Axis(-15/+110) degreeType of gripperDouble gripper Production Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar; - Chip conveyor (scraper type) with tank capacity: 205 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electr ...

Shaft grinding, polishing, milling machine Specifications: - Speeds 850 to 12000 rpm - Flexible shaft approx. 2 m - Mobile undercarriage - Suitable for grinding and polishing tools - Drive 380 V / 1.0 hp - Space requirement approx. W 500 x H 1000 x D 500 mm - Weight approx. 45 kg - Mobile undercarriage

Vacuum injector micro blasting machine Specifications: -Applications: - Demoulding beams, electrode production, primer preparation - Structuring rapid – tooling technology, cleaning blasting (soft blasting) - Vacuum cab with viewing window with motorized tilting hood - Tilting hood tilts motorically up to 90 ° - Blasting chamber accessible by hand, with two work gloves - Strahlpistollen - Steel turntable manually rotatable 1000 mm - Blast room interior height 500 / 840 mm - Internal blasting room width + internal blasting room depth 1100 mm - Abrasive drying system can be infinitely adjusted electronically - Microfilter dedusting system – IMF type unit - 2 - Compressed air connection up to 10 bar - Drive 400 V / 2.9 kW - Space requirement approx. W 1400 x H 2300 x D 3100 mm - Weight approx. 900 kg - Separate work platform with st ...

3M-Matic 800a-E Type 29600 (5799) Carton sealing machine for lid and bottom closure with adhesive tape, side belt belt drive system, carton format range in mm length 150 - ~, width 115 – 550, height 120 – 625, manual carton size adjustment, maximum carton weight approx. 38 kg, roll discharge with a length of approx. 1200 mm, drive laterally, electrical connection 380V/50Hz/3PH/1.4A, 260W, machine in mobile version on rollers, output up to 40 cartons per minute

Inv. Num. : 8519 Type: MicroCut 3001.15P Producer: MicroStep Created: 2007, GO 2017 Parameters: Software: AsperWin Basic (2007) Work table length: 3000 mm Work table width: 1500 mm Maximum sheet thickness when cutting: 40 mm Maximum sheet thickness when cutting (stainless steel): 40 mm Maximum sheet thickness (brass): 12 mm Maximum sheet thickness (copper): 12 mm Plasma Source: Formica ForCut 163W Burner: MT120

Inv. Num. : 8520 Type: MicroMill 2501.15F Producer: MicroStep Created: 2012 Parameters: Control System: iMSNC Software: Asper 3.5 – Basic Operating hours: 15000 h Work table length: 2500 mm Work table width: 1500 mm Source: MicroMill 2501.15F Equipment: Vacuum Suction Cups WITTE 84413 Filtration Nedermann E-PAK 500 3 mechanical grippers with manual pneumatic control on one side Static magazine for 8 tools at the end of the table

Clamping force 1800 kN. Extruder S 120/28D. Accuhead 25 ltr with 100-point programming. Die dia min/max 150/450 mm

Vemag vacuum filler -Type: DP10E -Power: 12 kW -Filling speed: 6000 kg/h -Portion size: 5-60 000 g -Hopper capacity: 250 L -External dimensions: 2200 x 1500 x 1950 mm -Power supply: 400V 50Hz -Year of production: 2014 -Weight: 1300 kg -Condition: Used in very good condition, ready to work

Manufacturer: LOESER Model : RPS374/8 Year of Manufacture: 2007 (The system went into operation in 2008) Voltage: 400 V Frequency: 50 Hz Current: 200 A Overall dimensions are around 8 m × 2.2 m Cylindrical grinding machine with 1–10 stations for processing cylindrical materials made of steel and other metallic or non-metallic materials. Technical Data: - Diameter Range: 3 – 150 mm - Contact Wheels: Dimensions 400 x 150 mm - Part Feed Rate: approx. 0 – 30 m/min (depending on the workpiece transport system) - Feed Wheels: - Manually adjustable based on the workpiece diameter - Pneumatic pressure application Abrasive Belts: - Dimensions: - Standard: 2500 x 150 mm - Optional: 3500 x 150 mm - Belt Tension: Pneumatic - Belt Drive Power: - 5.5 kW (optional: 7.5 kW or 11 kW) The machine is prepared for wet grinding Find more here - / Contact us at -

Travel X/Y/Z: 3000mm/1500mm/115mm, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, axis speed: 140m/min, laser type: TruFlow 5000, laser power: 5000W (5kW), machine dimensions X/Y/Z: approx. 9300mm/4600mm/2200mm, weight: approx. 12000kg, operating hours (as of February): approx. 75000h, laser hours (as of February): approx. 42000h. Documentation available. On-site inspection is possible.

Vaporetta VDG 1404 delaminator for separating 3 films connected to each other (carrier film, useful film and protective film). Material width max. 400 mm The still connected foils are passed from a roller through 2 sheets, at the rear edge of which they are separated from each other. The separation is achieved by pulling the foils in different directions. The protective film and the carrier film are rolled up on spindles via slip clutches and disposed of later. The usable film runs through a silicone-coated pair of printing rollers and then into the cutter via various deflections and a dancer that coordinates the laminator with the cutter. The machine can also be used as a sheeter for roll stock to produce sheets from roll stock. With documentation.

SUB: FOR SALE... CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY HAVE A GDY SIR WE VE 1 PC USED CHRIS MARINE VALF SPINDLE GRINDING MACHINE AT TURKEY TYPE BSP-2 NO. 463/204 DATA 3X 440V 60HZ IT WAS USED VERY LESS HOURS IF YOU HAVE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US. Capt. Ayhan Ugurlubay Regards; Aliaga marine services E-mail: infoaliagamarine.com PHN/fax: + 90 232 618 03 88 Mobile: + 905556084850 ABC.aliagamarine.com TURKEY

SPECIFICATIONS: Table: 1000 x 1000 mm Flywheels: Ø 900 mm Saw blade length: 5985 mm Saw blade width: 108 mm Electronically adjustable saw blade guide Manual saw blade adjustment Installed power: 15 kW EQUIPMENT: 1 Resawing Saw (SAM meccanica SR/026) SPECIFICATIONS: Installed power: 0.37 kW Operating pressure: 5÷7 bar Roller: Ø 200 mm Roller height: 400 mm Max. opening angle - saw blade: 200 mm Max. opening roller - saw blade: 400 mm

GeneralVertical Machining centre; Control: DMG MORI ERGOline IV Multi-Touch CharacteristicsTable surface900 x 600 mmTool Magazine with30 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemTouch Probe Heidenhain TS 460Touch Probe HEIDENHAIN for workpiece measuring Option includes: - TS 460 Touch probe with optical signal transmission - measuring cycles - calibration ring - case for equipmentTouch probe Heidenhain TT160Touch Probe HEIDENHAIN for tool length and diameter measurement Option includes: - TT160 probe for tool measurement - measuring cycles with tool breakage monitoring - calibration tool Note: Additionally to ...

This Filling machine has been running supporting a large supermarket Chain for the Greek Yoghurt Type cups from 500 gr to 1000 gr yoghurt. The machine has been maintained very well and will be available for dismantling October 2025 . It can be seen running in production. This consists of cup de nester, cup peroxide, filling, UV on film, Film sealing on roll off , Over lid Cap applicator ., Capacity: 2000 cps/hr , Filling Type: Piston Filler , Filling Volumes : 500-1000 gr , Controls: Siemens HMI , Cup disinfection: Peroxide , Film Disinfection: UV , Cup Diameter: 120 mm, Film application: Heat sealing and cutting off roll , Over cap: Plastic lid after sealing

CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z42/42/42 m/minGeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 Spindle speed range 20 to 12.000 rpmSpindle speed range 20 to 12.000 rpm AC main drive:13/9 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 80 barProduction Package 80 bar Option includes: - Internal coolant supply 80 bar - Tank capacity: 600l with papertype filter - Chip conveyor (scraper type) with tank capacity: 200 l (left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - EActive cooling systemActive cooling system for selected mechanical components in order to increase machine thermal stabilityAir coola ...

Sealing frame X/Y: 520mm/380mm, max. product dimensions X/Y/Z: 500mm/380mm/250mm, max. packaging capacity: 300 pieces/h, table height: 925mm, machine dimensions X/Y/Z: approx. 1300mm/850mm/1350mm, weight: approx. 150kg. On-site inspection is possible.

Measuring range X/Y/Z: 700mm/700mm/500mm, probe ball diameter: 7.9942mm, control: Zeiss C90, touch probe: PH6/TP6, max. measuring deviation: 3.6+L/250µm, max. angle error: 0.22°, weight: approx. 1500kg. Documentation available. On-site inspection is possible.

max. workpiece diameter: . mm min. workpiece diameter: . mm workpiece length: . mm clamping diameter max.: 550 mm Vertikal stroke: 800 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CNC CO2 Laser Cutting Machine Bystronic Bystar 3015 Laser source: ByLaser 4400, Laser power: 4400W (4.4kW), Working area X/Y/Z: 3000mm/1500mm/170mm, Max. workpiece weight: 890kg, Positioning accuracy: +/-1mm, Repeatability: +/-0.05mm, Rapid traverse: 50m/min, max. material thickness mild steel/stainless steel/aluminum: 25mm/20mm/12mm, Max. sheet weight: 160kg/m². Control: ByVision CNC, Video on request

Capacity 22 kg Fuel Natural gas With WEISHAUPT AFTERBURNER adn Stone sorter

Perfect binding line - Back Gluing Machine for Hard Cover Fully rebuilt in 2011 Equipped with : 1 x Wohlenberg Master 7000 – 19 clamps binder Cover feeder Gauzing station Cold glue & PUR gluing unit 2 x Nipping stations Conveyor system 1 x Wohlenberg Sprinter 7010 - 20 stations gatherer Criss/Cross delivery Optigraf sheet control system 1 x Wohlenberg Trim-tec 60i trimmer (2006) 1 x Stacker

Chiller - Euro Cold 09-CF-02960 / New, unused Year of Make: 2014 Location: Lodz, Poland Description: Cooling capacity approx. 45 kW Refrigerant R407C The device has: - 1 compressor - Separate container for medium - Barrel pump -Radiator - Fan x 2 The device has an additional heating function and can be used to control the temperature of tools The device after maintenance, fully functional 3-month operating warranties in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Cooling unit (chiller) - Euroklimat RKO. E-B/ST/AS 201S / Perfect technical condition Year of Make: 2019 Location: Lodz, Poland Description: Cooling capacity approx. 60 kW Refrigerant R290 The device has: -Compressor - Separate container for medium, approx. 200l -Circulating pump -Heat exchanger -Radiator - Fan x 2 Depending on the load, the fans can work at different speeds The device is suitable for outdoor work The unit can work as a heat pump and has heating and cooling functions The device after maintenance, fully functional 3-month operation warranty in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Chiller - Hyfra Chilly 35 Year of Make: 2007 Location: Lodz, Poland Description: Cooling capacity approx. 6 kW The device has: -Compressor - Liquid containers - Circular pump -Heat exchanger -Fan Refrigerant 407C The device after maintenance, fully functional 3-month operating warranties in Poland All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

H&M chamfering milling machine for pallet boards

turning diameter: 140 mm turning length: 615 mm control: C200-4D spindle passage: 65 mm Main spindle: turning speeds: 5.000 U/min max. torque at 40% / 100% load: 145 / 105 kW turret-slide: 1,2 und 3 x-travel: 110 mm z-travel: 360 mm y-travel: 70 mm rapid traverse X/Y/Z: 25/12/45 m/min Opposed spindle: slide travel X-axis: 150 mm Z- Travel: 600 mm turning speeds: 5.000 U/min B - axis: B-Korrekturachse +/- 1 ° tool turret - number of stations: 3 x 12 tool taper DIN 69880: VDI 25 x 48 C-axis: 0,001 ° total power requirement: 61 kW weight of the machine ca.: 6,5 t dimensions of the machine ca.: 9,75 x 3,10 x 2,85 m Loading: Breuning Profimat 65.8x270/8 multi-channel loading magazine, built in 2005 for bars with lengths of 500–3,000 mm, 8 guide channels with spindle insert tubes (Ø 16, 25, 30, 40, 45, 55, 60, 65 mm) Unloading: BREUNING ILS-REX-7208 automatic workpiece unloader, built i ...

Weight: 3 to x-travel: 750 mm milling-head swivable +/-: ja : ja The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Mobile concrete batching plant SUMAB 500: - The basic module is equipped with 2-4 hoppers. - Completely pre-assembled at the factory, which reduces assembly time. - Does not require a special foundation for installing the main unit of the installation (only a solid concrete slab). - Equipped with a sealed cabinet located on the structure and a computer control system. - Includes high-end installation features in a compact size. - The entire assembly (except silos) is transported in one 40-foot container. Basic indicators: - Dosing cycles 0.5 m3. - Turbo concrete mixer FTR 750/500. Equipped with a weighing system for aggregate and concrete. - Equipped with 1-2 units of 2 bunkers with a capacity of 7 m3 each. - Aggregates are dosed using B400 extraction conveyors. - Water dosing device with counter. - Water installation equipped with a 1.1 kW feed pum ...

Key data: 3200 kN, 359 g/PS, 50 mm

1.0 St. gebr. Two-component injection molding machine Manufacturer: ARBURG Type: 720A3200-800/70 Year of Make: 2017 Clamping force: 320 tons Spar spacing 720 x 720 mm Installation height min./max.: 300 - 800 mm Opening travel: 600 mm Screws DN 1: 50 mm Max. displacement: 392 cm³ Moulded part weight in hp: 359 g Screw DN 2: 22 mm Max. displacement: 34 cm³ Moulded part weight in hp: 31 g Control: Selogica Request technical equipment.

Chromed Air Table, Programs, Air Side Tables, Light Bariers, Standard Accessories

Orgapack Cordless strapping tool, type OR-T 260, incl. quick:charger and battery.

Packaging machine Paal / Bosch ELE 2ALS 1995 (Retrofit 2015) Retrofit (modernization): 2015 Availability: from August 2025 Condition: fully functional Connected loads: 400 V, 3 Ph, 50 Hz