bottle rinser machine used for sale

current capacity: - kVA throat: - mm contact pressure capacity: - kp Rated power ( 50% ED ) : 50 kVA Continuous power : 35.4 kVA Maximum short circuit power : 163 kVA High welding power : 130 kVA Arm distance min. / max. : 60 / 230 mm Electrode arm Ø : 45 mm Electrode holder Ø : 25 mm Outreach : 610 mm Machine weight: approx. 285 kg Dimensions : 1200 x 700 x 1450 mm incl. foot switch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 34 mm throat: 300 mm bore stroke: 150 mm bore capacity in cast iron (diameter): 40 mm thread capacity: M 27 spindle taper MT: 4 spindle speeds:: Stufenlos 100 - 2000 U/min column diameter: 125 mm automatic feeds: 3 / 0,1 - 0,2 - 1,3 table:: 400 x 420 mm Drive: Keilriemen total power requirement: 3 kW weight of the machine ca.: 360 kg dimensions of the machine ca.: 2,3 x 0,6x 1,1 m - Drilling machine of circular column feed automaticmechanical - Drive by electronic wide V-belt - Spindle taper: CM 4 - Stepless speed adjustment with frequency converter - Potentiometer for speed adjustment - digital speed display - Automatic feed reversal when threading - Scale with adjustable drilling depth - automatic tool ejector - Push button for EMERGENCY STOP switch for right/left rotation - Electronic control integrated in the drill head - integrated coolant system - ...

bore capacity in steel (diameter): 45 mm throat: 350 mm bore stroke: 180 mm : 4 speeds: 30 - 765 U/min table-size: 720 x 560 mm total power requirement: 3,4 kW weight: 950 kg dimensions: 1200 x 800 x 2300 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360°  ...

diameter: -- mm workpiece length: -- mm work piece width: 12 mm range of angles: 30/45/22,5/37,5/50 ° weight of the machine ca.: 30 kg Chamfering system UZ12 ULTRALIGHT - KIT 30° + 45° Maximum bevel width 12 mm with automatic feed The UZ12 ULTRALIGHT is one of the lightest automatic beveling machines advance in the market. Thanks to its compact size and light weight it is not only suitable for workshops, but also for assemblies. The Machine is equipped with the automatic feed and therefore does this Working with the UZ12 ULTRALIGHT very comfortably. For conventional steel (up to 600 MPA/87022 PSI strength), Brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 65 x 60 x 3 mm Application range of sheet thickness 3 - 35 mm Beveling of pipes from an inner diameter of 95 mm Variable setting of the desired bevel using an exchangeable holder kit  ...

x-travel: 4000 mm y-travel: 2000 mm z-travel: mm : 4000 bar total power requirement: 35 kW weight of the machine ca.: t dimensions of the machine ca.: m MicroStep CNC water jet cutting system AquaCut-W 4001.20 with the following features: • BFT high pressure pump ECOTRON ® 40.37 • Desludging system (scraper conveyor) for a length of 4,000 mm • Water softening using water chemistry 1. MicroStep CNC guide machine AquaCut-W 4001.20 (4,000 x 2,000 mm} MicroStep® machine control with MML console and 24 touchscreen Two LCD operating units on the portal Laser pointer with automatic offset transmission iMSNC® module / expert system iMSNC® module / assistant for service and maintenance work iMSNC® module / assistant for loading CNC programs iMSNC ® module / automatic calibration of mechanical scanning iMSNC® module / management of cutting programs (MRP} iMSNC® module / Ecolnfo iMSNC ...

thread dia.: M6 - M36 mm turning speeds: 156 U/min radius: 1200 mm angle adjustable from - to: 0 - 90 Grad weight of the machine ca.: 0,4 t dimensions of the machine ca.: 1,4 x 0,1 x 0,7 m Electric tapping machine / 4450136SET Fast and precise thread cutting with freely positionable swivel arm - The machine head can be swiveled from 0 to 90 degrees - Quick change chuck with slip clutch for safe thread cutting without Risk of breakage - Right-left rotation can be selected on the machine head - Setting of thread size, speed, pitch and cutting depth via Touchscreen on the swivel arm - Manual mode: the stops after the set cutting depth is reached Spindle automatic, forward and reverse must be activated manually. - Automatic mode: changes after the set cutting depth is reached the machine automatically from the forward to the return - ideal for that Thread cutting of several blind holes Incl. ...

turning diameter: 660 mm turning length: 1500 mm control: FAGOR centre height: 330 mm spindle passage: 82 mm number of spindle speeds: 30-2000 U/min bed width: 390 mm rapid speed: X/Z 4 - 8 m/min tailstock quill diameter: 75 mm Main spindle capacity: 15 kW weight of the machine ca.: 3200 kg dimensions of the machine ca.: 3800 x 1800 x 2150 m First commissioned in 2015, very good condition - FANUC Series 18i TB Control, Manual Guide i Function - Central control panel for machine and CNC control on the pedal arm 45 ° swiveling - 12-fold tool turret - Fanuc drive with 30 kW (50% ED) - Chip conveyor - Bezel - 3 jaw chucks The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 28 t stroke: 180 mm table-size: 300 x 550 mm diameter of piston: 130 mm work speed: min. 2 m/sec work speed: max. 9,8 m/sec return speed: 20 mm/sec Max. pressure: 200 bar weight of the machine ca.: 0,65 t total power requirement: 4 kW dimensions of the machine ca.: 1,15 x 0,75 x 1,1 m • The horizontal bending and straightening press from Profi Press is a universal one Hydraulic press specially designed for performing bending, profiling and Straightening work is designed. The applications of the machine are different and depend on the accessories that are on the work table, the Tool holder and are installed in the holes and pin holes. • The HB-28 model is used for light bending measurements on the work table equipped with an angle scale, and the press can also be equipped with tools are supplied (for example block punching) that are placed on the tool holder Can be assembled ...

tube diameter: 28 mm wall strength: 2 mm bending radius min.: 90 ° Control: 3D TubeSoft Slim total power requirement: 3,5 kW weight of the machine ca.: - kg dimensions of the machine ca.: - mm Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread dia.: bis M 16 mm turning speeds: 0 - 600 U/min thread: M5 - M16 working area: 2050 Rmax. working area: 500 Rmin. table surface area: 900 mm engine output: 3,0 kW weight: ca. 250 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 480/500 mm y-travel: 230/250 mm z-travel: 380/400 mm speeds: 45 - 2240 U/min table surface area: 1000 x 250 mm tool taper: SK 40 control: HEIDENHAIN TNC 124 total power requirement: 3 kW weight of the machine ca.: 1550 kg dimensions of the machine ca.: 2600 x 2200 x 1800 mm - horizontal + vertical milling spindle - Cooling device - swiveling table - Chip tray - Feed X/Y/Z - axis infinitely adjustable 8-1680 mm/min - Rapid traverse X/Y/Z - axis 4000 mm/min - Control HEIDENHAIN TNC 124 - Operating hours: 4764 hours - Machine light - Machine feet - Operation manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mm workpiece length: -- mm work piece width: 0 - 20 mm speeds: 2850 U/min range of angles: 0 - 60 (stufenlos) ° weight of the machine ca.: 19,5 kg Maximum chamfer width 20 mm + face machining Designed for chamfering and deburring straight edges, for the so-called FACING - removing an unwanted layer of material on the Front side of the workpiece, which is created, for example, by flame cutting a sheet metal. Specially developed for the production of visible chamfers and weld preparations. Powerful electric drive for extreme Charges. High performance motor stepless adjustment of the working angle in the range of 0° - 60° FACING - Edge processing at an angle of 0° to remove unwanted ones Layers of material after flame cutting The unique mechanical scale to adjust the bevel width for higher precision A very compact and ergonomic design for high work productivity Circum ...

sheet width: 1015 mm plate length: 1015 mm plate thickness: 6,0 mm Punching capacity: 25 t punch diameter: 88,9 mm total power requirement: 16 kW weight of the machine ca.: 12000 kg dimensions of the machine ca.: 4000 x 2320 x 2300 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 6 mm pressure: 12 t cutting range: Breite x Länge 200 mm no. of strokes: 15 Hub/min cutting angle: 30 - 140 ° total power requirement: 4 kW weight of the machine ca.: 1,02 t dimensions of the machine ca.: 1065 x 900 x 1210 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table length: 4000 mm table width: 2000 mm burner heads: 1 Control: CNC workpiece weight: 2510 kg traversing speed: 200 m/min dimensions of the machine ca.: 11599 x 3380 x 2718 mm CUTTING CAPACITY: STRUCTURAL STEEL 25 mm STAINLESS STEEL 15 mm ALUMINUM 12mm BRASS 8mm COPPER 8mm MACHINE AXES: 4 axes [X, Y, Z, U ] CUTTING HEAD: Precitec ProCutter CAD/CAM SOFTWARE: LANTEK EXPERT CUT 4 servo motors for all axial movements CNC CONTROL PANEL 15 5” touch screen IPG laser sources and coolers integrated Precitec Procutter cutting head system AIR FILTER (compressed air filter) CONVEYOR BELT under cutting area Closed housing and specially coated filter protection windows LOADING / DISCHARGING SYSTEM PROPORTIONAL GAS AND PIPE SYSTEM The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

table width: 3000 mm table length: 1500 mm burner heads: 1 Plasma cutting system HEZINGER PlasmaLine EPJ / ECKERT with extraction system PFC-4 Plus 4kW F3800 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

I - beam section - flat steel: 140 x 140 x 13 mm I-beam section - upend: 120 x 120 x 13 mm L-beam: 130 x 130 x 12 mm round bar steel: 85 mm bending capacity - flat iron: 125 25 mm flat steel: 65 x 65 mm including various rollers: Pipe Ø: 219 mm (tool/roller Ø 535 mm) 140 mm (tool/roller Ø 420 mm) 273 mm (tool/roller Ø 520 mm) 203mm 168.3 mm (tool/roller Ø 500 mm) 75 mm (tool/roller Ø 400 mm) 49 mm (tool/roller Ø 420 mm) 48.3 mm (tool/roller Ø 420 mm) 22.5 mm (tool/roller Ø 420 mm) 32/32.5 mm (tool/roller Ø 420 mm) 60 mm (tool/roller Ø 420 mm) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

diameter: -- mm workpiece length: -- mm work piece width: 0 - 3 mm speeds: 3600 U/min range of angles: 30 - 60 (stufenlos) ° weight of the machine ca.: 31 kg dimensions of the machine ca.: 530 x 420 x 410 mm Maximum bevel width of 3 mm - Mechanically adjustable bevel angle Designed for deburring and chamfering steel parts and workpieces. Processing of different materials. Solid and stable machine construction. Scale for setting the processing depth Security cover Adjustable processing angle For steel, stainless steel, aluminum and other materials Precise, massive and overlong mechanical guide - Number of indexable inserts: 5 pieces (four-sided) - Feed: manual The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 1050 mm : 5,5 mm : 5,0 mm roll diameter: 130 / 195 mm : 2,2 kW : 1050 kg : 2150 x 900 x 1200 mm - 2 central rollers driven by an electric motor - Swing-out upper beam - Conical bending device - separate control panel - self-braking main motor - CE mark/Declaration of Conformity Special equipment included in the price: - hardened rollers - Motorized rear roller adjustment The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

plate thickness: 1,2 mm roll diameter: 62 mm throat: 100 mm weight of the machine ca.: 50 kg dimensions of the machine ca.: 560 x 220 x 500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 254 mm bore stroke: 120 mm : 4 Motor output: 9 speeds: 120 - 1810 U/min column diameter: 92 mm table surface area: 475 x 425 mm total power requirement: 1,1 kW dimensions: 915 x 450 x 1705 mm weight: ca. 135 kg Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can ...

x-travel: 2000 mm y-travel: 920 mm z-travel: 900 mm table surface area: 2200 x 750 mm table load: 3 t number of T-slots: 6 T - slots - width: 18 mm T - slots distance: 120 mm spindle taper: ISO 50 DIN 69871-B spindle speed max.: 3000 U/min transmission ratio: 1 speeds infinitely variable range 1: 60 - 3000 U/min weight of the machine ca.: 21,6 t feeds longditudinal/cross/vertical: 0 - 5000 mm/min rapid traverse: 15000 mm/min total power requirement: 38 kw weight of the machine ca.: 11 t Pull studs DIN69872-B | IKZ Hours: Control on: 43036 h Machine on: 41311 h Program run 13894 h The machine is already dismantled The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 30 mm throat: 270 mm bore stroke: 125 mm : 4 Motor output: 9 speeds: 70 - 2800 U/min Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360° Drilling depth stop LED machine light integrated in the drill head V-belt cover with s ...

diameter: -- mm workpiece length: -- mm work piece width: 18 mm range of angles: 15° - 50° ° weight of the machine ca.: 110 kg Chamfering system UZ18 HARDWORKER Maximum bevel width 18 mm with automatic feed The UZ18 Hardworker machine is one of the most powerful automatic feed beveling machines on the market. It is not only suitable for workshops, but also for on- site assembly. The machine has a stepless working angle adjustment system. Thanks to the special design of the drive system, the UZ18 Hardworker is also suitable for harder materials. The machine is equipped with the automatic feed. Working with UZ18 Hardworker is therefore very convenient. For conventional steel (up to 600 MPA/87022 PSI strength), brass, copper and aluminum materials For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm Application range of sheet thickness 6 - 40 mm The bevel angle can ...

angular steel - leg outwards: -- mm double T-iron on the x-axis: -- mm U-iron on the x-axis: -- mm : 50 mm : 150 mm throat: 120 mm total power requirement: 1,5 kW weight of the machine ca.: 0,36 t dimensions of the machine ca.: 1,1 x 0,8 x 1,4 m Exhibition machine NEW, year of construction: 2021 The PB 50-3 is a profile bending machine with manual adjustment of thetoprollervia a handwheel. The profile bending machine can be used in vertical and horizontal working position and are equipped with three driven rollers. The change between two or three driven rollers is done simply by the side handle of the machine. - Manual adjustment of the top roller with a handwheel - Vertical and horizontal work possibility - 3 driven rollers - Supplied with a standard roller set - Foot pedal The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 150 mm band length: 2280 mm band speed: 22 m/sec table-size: 700 x 350 mm roll diameter: 140 / 80 mm motor speeds:: 2880 1/min range L-W-H: 1300 x 800 x 1500 mm total power requirement: 3,0 kW weight of the machine ca.: 250 kg Horizontal belt grinder - Small, flexible all-rounder - Solid gray cast iron unit - long-lasting, good grinding results - Motorized tape oscillation approx. 10mm - Pneumatic belt tension - Small table on the pulley for grinding radii and shapes - The entire sanding belt can be used thanks to the height-adjustable work table - Including angle and miter fence Special equipment: - swiveling grinding unit 90 - 135 degrees - Support table on the pulley The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 40 mm throat: 300 mm bore stroke: 170 mm : 4 speeds: 70 - 1400 U/min table-size: 600 x 450 mm total power requirement: 3,0 kW weight: 350 kg dimensions: 1200 x 800 x 2150 mm Column drilling machine OPTIdrill DP 33V promotion set / 3020680SET With an electronically controllable drive in a modern design Industrial engine Quiet running spindle thanks to new spindle design Machine operation with safety electronics in 24 V direct current Guaranteed concentricity = 0.02 mm in the measured drilling spindle Clockwise/counterclockwise rotation Precision spindle bore Control panel with user-friendly, dirt and water resistant Membrane keyboard RPM display Separate emergency stop button Tapping function Precisely crafted, stable drill table with diagonal T-slots with all-round cooling water channel, can be tilted sideways by ±45° and rotated by 360°  ...

diameter: -- mm workpiece length: -- mm work piece width: 15 mm range of angles: 15-50 ° plate thickness: 6-40 mm total power requirement: 1,5 kW Feed speed: 3,5 m/min. dimensions: 530 x 395 x 860 mm weight of the machine ca.: 94 kg The UZ15 RAPID machine is one of the fastest beveling machines with automatic feed on the market. It is not only suitable for workshops, but also for assembly work. It has a stepless Bevel angle adjustment system. Also, the machine with an automatic feed equipped. Working with the UZ15 Rapid is therefore very convenient. - For conventional steel (up to a strength of 600 MPA/ 87022PSI), brass, copper and aluminum materials - For chamfering workpieces with the minimum dimensions of 70 x 150 x 6 mm - Application range of sheet thickness 6 - 40 mm - The bevel angle can be easily adjusted from 15° to 50° continuously without that a part needs to be replaced - D ...

tube diameter: 60 mm wall strength: 3 mm bending radius min.: 2 x Rohr-Ø ÷ R200 mm bending angle: 0 - 180 ° gas tube pipelines: 2 (60.,3mm) mm speed: stufenlos 0,5 - 2,0 total power requirement: 1,5 kW weight of the machine ca.: 0,7 t - Powerful mandrel bending machine up to 2 gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

width of the strips: 75 mm band length: 2000 mm band speed: 30 m/s total power requirement: 3,0 kW weight of the machine ca.: 70 kg dimensions of the machine ca.: 610 x 944 x 1419 mm Mobile belt sander PASOVEC 75 RUNNER Pasovec 75 RUNNER - the special belt grinder developed for Surface grinding applications, especially for grinding weld seams in the material surface. Pasovec 75 Runner removes unwanted layers that occur when Sheet metal rolling or after sheet metal cutting with plasma or oxygen arise. Innovative, multifunctional machine Stepless adjustment of the grinding depth Equipped with a dead mans switch Station for flat grinding small workpieces Low running costs The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working width: 950 mm workpiece width - max.: 1,0 - 50 mm sandingbelt width: 970 mm sandingbelt length: 1900 mm weight of the machine ca.: 1,8 t The SMD 123 RE is a universal entry-level machine for all-round deburring Uniform edge rounding and surface grinding of sheet metal dry process. Suitable for processing steel, stainless steel and aluminium. The non-slip conveyor belt enables safe transport and the Machining even of small workpieces. The two rotor heads ensure an all-round uniform Edge rounding and a directionless finish. The intuitive operation via touch panel allows every employee get to grips with the machine quickly. The SMD 1 models are installed and ready for operation in a short time. The compact design saves valuable production space. Low acquisition and operating costs lead to short amortization periods and guarantee economical processing of your workpieces. consi ...

x-travel: 580 mm y-travel: 200 mm z-travel: 340 mm speeds: 115 - 1750 U/min table surface area: 1000 x 240 mm tool taper: ISO 40 total power requirement: 4,5 kW weight of the machine ca.: 820 kg dimensions of the machine ca.: 1290 x 1090 x 2170 mm Universal precision drilling and milling machine for horizontal and vertical milling work with digital 3-axis position display DPA 31 Plus Description: - Heavy, solid design made of high-quality, vibration-absorbing gray cast iron - Oil bath gear with ground, hardened gear wheels - Coolant system - Halogen machine lamp with bundled beam - Solid and large cross table, precisely surface-machined with T-slots and adjustable wedge strips - Milling head can be tilted ± 45° - Right/left rotation - X-axis moves either with the handwheel or via the table feed device - Automatic limit switch on the X-axis - Height-adjustable protective screen with mic ...

x-travel: 520 mm y-travel: X mm z-travel: X mm weight of the machine ca.: 0.2 t Dividing head with collets www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 175 mm centre distance: 1000 mm grinding wheel dia. x width: 400 x 50 / 225 x 20 mm grinding wheel hole diameter: 127 / 76.2 mm grinding wheel turining speeds: 1500-2200 U/min cross slide - travel: 245 mm workpiece spindle head:: turning speed range - stepless: 6-600 U/min spindle cone MT: 5 tailstock quill taper MT: 3 max. angular position of the table: +/- 8 ° weight of the machine ca.: 3.1 t dimensions of the machine ca.: 2.85 x 1.75 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): 25 mm throat: 245 mm bore stroke: 120 mm weight of the machine ca.: 1.35 t dimensions of the machine ca.: 1.6 x 1.5 x 2.4 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 650 mm grinding width: 450 mm workpiece height: 325 mm table-size: 600x350 mm grinding wheel diameter: 350 mm weight of the machine ca.: 2.7 t Magnetic table 600x400mm Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 600 mm grinding height: 500 mm weight of the machine ca.: 4.9 t dimensions of the machine ca.: 3.20 x 2.90 x 2.55 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

bore capacity in steel (diameter): x mm bore capacity in steel (diameter): x mm throat: x mm throat: x mm bore stroke: x mm bore stroke: x mm POLYHEDRAL DRILLING MACHINE Drilling range: -Square: Spanner opening 3-27mm -Hexagon: Spanner opening 3-32mm Drilling depth: -Square -14mm -Hexagon-13mm Throath150mm Misc accessories More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 370 mm plate thickness: 0-2 mm work piece width: x mm weight of the machine ca.: 0.2 t dimensions of the machine ca.: 0.6x0.4x1.1 m Dressing device Exhausting device www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 200 mm centre height: 100 mm centre distance: 525 mm weight of the machine ca.: 700 kg dimensions of the machine ca.: 120x100x150 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

grinding length: 800 mm grinding width: 500 mm workpiece height: 480 mm table-size: 800x400 mm weight of the machine ca.: 3.4 t Magnetic plate 800x400mm www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

max. grinding diameter: 200 mm grinding length: 525 mm centre height: 102 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

x-travel: 850 mm y-travel: 500 mm z-travel: 450 mm table-size: 1250x500 mm spindle taper ISO: 50 spindle turning speed range: 35,5-1800 U/min weight of the machine ca.: 5.2 t HEIDENHAIN TNC-355 Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

number of spindles: 2 bore capacity in steel (diameter): 10 mm bore stroke: 100 mm weight of the machine ca.: 0.3 t dimensions of the machine ca.: 0.67 x 0.62 x 1.7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

temperature: 80/130 °C 0: 100 kg filling capacity: 750 l basket dimensions: 670x480 mm number: 25 total power requirement: 43 kW weight of the machine ca.: 890 kg dimensions of the machine ca.: 185x190x150 cm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Diameter: 230 mm table diameter: 500 mm workpiece height: 150 mm weight of the machine ca.: 2 t dimensions of the machine ca.: 2 x 1.2 x 2.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

drill diameter: 2-40 mm drilling length: x mm lip angle: 40-180 ° weight of the machine ca.: 0.4 t Dressing device Point thinning attachment More details on www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

centre height: 140 mm max. grinding diameter: 279 mm centre distance: 750 mm weight of the machine ca.: 1000 kg dimensions of the machine ca.: 1.5 x 1.25 x 1.5 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

core drilling diameter max.: 16 mm bore depth: 485 mm swing diameter: x mm table-size: 590x350 mm spindle turning speed range: 230-2300 U/min weight of the machine ca.: 0.4 t Table with digital read out Misc accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

thread capacity: -M 3,5 thread pitch: x mm throat: 100 mm table-size: 180x180 mm weight of the machine ca.: 0.140 t www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.