130,656 used machines on RESALE, but how to find them? Machine Search
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmGeneral2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmMain drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axes universal turning center with driven tools, C-axis and Y-axis; Control: CELOS with Siemens 840D sl Operate Main drive 1Type of main driveAC Drive power (100% DC)12,6 kWDrive power (40% DC)14 kWSpeed range-5500 rpmTorque (100% DC)171 NmMax. torque (40% DC)192 NmC-Axis Speed100 rpmTorque of C-Axis (holding torque)168 NmWorking areaSwing diameter over bed650 mmSwing diameter over X linear guideways370 mmMax machining diameter320 mmClamping chuck Ø250 mmX travel250 mmY travel+/-50 mmZ travel550 mmDistance between spindle noses800 mmWork spindleSpindle noseA2-6 Spindle diametre on front bearing120 mmSpindle bore73 mmBar diameter max.65 mmTool holder 1Number of tool stations12 Number of driven tools12 Speed max.6000 rpmPower max. (40% DC)4,6 kWDMG MORI IoTconnectorIoTconnector connects DMG MORI machines as well as third-party machines with CELOS. Standardized interfaces enable d ...
General2-axis universal turning machine with - partiall hollow clamping device (hydr.) inner draw tube Ø 52 mm - C-axis and spindle brake (hydr.) - 12 stations circle revolver Sauter reception acc. VDI 30, DIN 69880-30 with tool drive Connection/drive acc. DIN 5480 Direct measuring system, glas scale in X-axis - tailstock; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways500 mmTransverse stroke210 mmLongitudinal stroke525 mmClamping chuck diameter max.210 mmMain drive 1Drive power (100% DC)13 kWSpeed range20 - 6000 rpmTorque (100% DC)171 NmC-Axis Speed-300 rpmTorque of C-Axis (holding torque)192 NmWork spindle (left)Spindle noseFlat flange Diametre of spindle nose140h5 mmSpindle bore73 mmSpindle diametre on front bearing100 mmTool holder 1Number of tool stations12 Shank diametre according to DIN 6988030 mmNumber of driven tools12 Speed max.-500 ...
General2 spindles automatic lathe - 2 cross slides - Main and counter spindle - Y axis on slide 1 - Y axis on slide 2 - C axis on main spindle - C axis on counter spindle - Chip tank with coolant system and coolant pump - Part unloading chute; Control: Numeric control Fanuc 32i Working areaBar diameter max.20 mmCounter spindle collet cleaningCounter spindle collet cleaning with coolantChanging kit from steady to sliding headstockChanging kit from steady to sliding headstock including application bush type Dunner B260 and bush-spindle syncronismAdditional charge for belt type chip conveyorAdditional charge for belt type chip conveyor, compatible with shaft-unloading-device Specific chip removol systems (for example: scraping blades chip conveyors, with additional filtering systems) are recommended in case of short chip material machininOil mist filter for emulsion or oilOil mist filter fo ...
Number of boring spindles: 4 St. Working width: 220 mm Working height: 120 mm Length of the planing table: 2.000 mm Feed motor: 1,5 kW Feed speed: 4,5 - 27 m/min. total power requirement: 15,5 kw Dimensions (L/W/H): 3.700 x 1.500 x 1.300 mm weight of the machine ca.: 1.600 kg turning speeds: 6.000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Working width: 1.100 mm Number of sanding units: 2 st. Workpiece thickness max.: 150 mm sanding belt measurements: 1.110 x 1.900 mm Motor roller: 15 kW Motor pad: 11 kW Feed motor: 1,5 kW Feed speed: 3 - 15 m/min. Overall size: 1.750 x 2.210 x 2.280 mm Weight: ca. 3.300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Baguette - Long Roller Sinmag Model: SM2-380 S Capacity: min. 50 - max.1200 g depending on TA with felt ribbons for soft doughs 3 feed rollers for more dough tension Rolling width: up to max. 750 mm Outlet plate extendable Stainless steel DGUV V3 tested Connection: 400V, 370 Watt, 16A-CEE plug Dimensions: 990 x 690 x 1580/1730 mm (with frame), WxDxH Throw-in height approx. 1500 mm Weight 258 kg NEW Machine 24 Months Warranty + Spare Parts Service Option: Leasing & Rental Service Maintenance contract E-Box Service Package Adjustable and mobile base Guided tour for loaf of bread Delivery Instruction & Commissioning We have many more bakery machines in stock for you!
Key data: 2500 mm, 2 mm
with foot switch, with simple control up to 6 bending angles, potentiometer preset, manual bending beam lowering, Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 2500 mm Sheet thickness steel: 2.5 mm without backgauge Colour: green Total power requirement: 16 A Space requirement: approx. 3400 x 1000 x 1600 mm Machine weight: 2000 kg without roller scissors Bending angle: 145 degrees Machine Number: 50/3
Key data: 3020 mm, 2 mm
with motor backgauge, numerical NC control, manual bending beam lowering, foot switch Machine is repaired, checked, cleaned by a professional and is then fully functional. Test run is carried out. Sheet width: 3020 mm Sheet thickness steel: 2.0 mm Sheet thickness aluminium: 3.0 mm Sheet thickness front: 1.5 mm Back gauge: 1000 mm Colour: green Total power requirement: 400 V Dimensions: 3800 x 1000 mm Machine weight: 4500 kg Upper beam stroke: 200 mm without roller scissors/ Opening width: 200 mm
Parallel Lathe CAZENEUVE type HB 575 Between points: 2000 mm Maxi Ø on bench: 575 mm Maxi Ø over saddle: 300 mm Spindle diameter: Ø 51 mm Rotation: from 20 to 1600 RPM Turret TRIPAN 411 3-jaws chuck Ø 200 mm Spindle motor: 15 CV ThreadingsMetric + Whitworth TailstockCM5 Lubricant tank Lubricant pump Supplied with 3 TRIPAN tool holders Voltage: 380 V Length: 3500 mm Width with tank: 1500 mm Total height: 1400 mm Weight: approx 3 T
max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Max diameter of workpiece 1200 mm Max workpiece height 1600 mm Max workpiece weight 1200 kg Number of wheelsxpower 2x 7.5 kw
max. format 78 x 115 cm Year of construction 2002 MC Control Counting device MCC 3 Round stack feeder Dual feed 6 fold pockets in the parallel fold section Downstream knife shaft Window rebate bag Vertical stack delivery Delivery date: immediately Price on request. We supply and install worldwide.
used
Entrance width 2000 mm Lenght 12.000 mm Number of turbines 6 Turbine output 7.5 kw
Manufacturer: MINIPAN Model: CMBY 0400X000.06 GIROPN Year of Manufacture: 2011 Type of Machine: Soft dough biscuit forming machine • Power supply: 400V • Power consumption: 3.2 kW • Backlit LCD display with touchscreen • Rollers for soft dough • Fixed molds with wire cutter • Rotating molds: "guillotine" that opens when the dough is placed and then closes for precise dosing without dripping • Sheet size: width 400 mm, Length: min. 600 mm, max. 800 mm • Sheet types: 2 internally inclined edges, magazine for up to 20 sheets • Dimensions: Length = 2600 mm Width = 990 mm Height = 1400 mm Weight = 530 kg • Sugar dispenser at the machine outlet • DÜBOR TSA 800/10 plate lubricator (, 2012) with 5 spray nozzles Find more here - / Contact us at -
Key data: 500 mm, 230 mm, 5 kW
SPECIFICATIONS: Working width: 500 mm Working height: 230 mm Electric height adjustment 2-speed drive Roller with 3 knives Installed power: 5.5 kW Voltage: 380 V EQUIPMENT: 4 spare blades Knife Adjuster
Doubleside glass grinding machine Min glass dimention 160x160mm Glass thickness 3-30 mm
Year of construction 2000 Mobile stacking delivery for marking-free laying Banding display with max. 3 panels Computer control with digital display Bundling with paper or plastic tape Mobile substructure Delivery date: immediately Price on request. We supply and install worldwide.
used
Turning diameter 350 mm Turning lenght 550 mm Spindle speed 5000 rpm Bar work diameter 65 mm Controller MAZATROL smart
GeneralVertical Machining centre; Control: DMG MORI ERGOline IV HEIDENHAIN TNC 7 CharacteristicsTable surface900 x 600 mmTool Magazine with60 PositionsMovement X / Y / Z600/600/510 mmRapid feed X / Y / Z30/30/30 m/minAC main driveSpindle speed range 20 to 15.000 rpm AC main drive:20/14,5 kW (40/100% DC) Tool taper SK40 DIN 69871 Tool clamping according to DIN69872Direct measuring system X,Y,ZDirect Measuring System X, Y, Z inclusive Air Purge for Measuring SystemProduction Package 20 bar with chip conveyorProduction Package 20 bar with chip conveyor Option includes: - Internal coolant supply 20 bar - Chip conveyor (scraper type) with tank capacity: 200 l(left) - Bed flushing via M-Function - Coolant spray gun for swarf removal - External electronic handwheAir coolant internal (through spindle centre)Air Coolant Internal (through spindle centre) switchable via M-Function maintained air wi ...
Cylindrincal grinding machine, KNUTH RSM 750, interna/external, DRO, This machine can be inspected under power in our warehouse., Mimu Machine Tools, Gussago BS Italy
Bar diameters 8-10-12 mm Maximum Bending Angle: 180° Maximum Pulling Speed 144m/min Bending lenght : 1650 mm
completely rebuilt Fidia Combi Unica Machine suitable for the production of folders, sleeves, envelopes, etc. Maler hot glue system, 2 glue heads. optional 3-point gluing for boxes possible. price quoted is for standard machine with 2 glue heads
Consisting of: Finger jointing shaper ProfiJoint, manual transfer station and one-channel press Infeed lenght 150-700 mm Timber width 40-150 mm timber thickness 20-50 mm
Specifications: - Cutting length up to 200 mm - Cutting thickness - steel up to 6 mm - Stainless steel up to 4 mm - Stepless cutting angle adjustment 30 - 135 ° - Stroke rate 60 1/min - Table support surface with T-slots 800 x 1000 mm - Depth stops with scale and angle adjustment - Table height 860 mm - Drive 400 V / 2.2 kW - E. - Footswitch - Space requirement approx. W 1000 x H 1650 x D 1700 mm - Weight approx. 1100 kg
Lg.Nr. 25072 Specifications: - Drilling capacity in steel ST 60 40 mm - Drilling spindle holder MK 4 - Drilling spindle stroke 150 mm - Drilling spindle speeds infinitely variable rpm - Projection 350 mm - Max. distance from drilling spindle to table 580 mm - Table with 2 T-slots 600 x 450 mm - Height adjustable via rack with hand crank - Table left + right tiltable - Drive 400 V / 3 kW - Space requirement approx. W 700 x H 1950 x D 950 mm - Weight approx. 650 kg -with: - Machine vise - Keyless chuck 1-13 mm -Lighting
Key data: 5000 kN, 80 mm
KM 500/2700C2 Specifications Closing page: Clamping force: 5000 kN Wooden dimension h x v: 900 x 800 mm Min. installation height: 480 mm Plate spacing max.: 1650 mm Centering: 200 mm Tool weight: 7900 kg Splash Side: Screw diameter: 80 mm Capacity: 1433 cc Spray pressure: 1829 bar Equipment: MC 4 Control Core moves: 2+2
max rod Ø: 20 mm Turning length: 350 mm Turning diameter over bed: 240 mm Speed: 23-4400 1/min 6-station turret 2 longitudinal slides 2 cross slides IEMCA Bar Feeder BOSS 432/32 max. bar length 3,200 mm
Key data: 700 mm, 450 mm, 450 mm
Universal Milling Machine MAHO MH 800 Travel X: 700 mm Travel Y: 450 mm Travel Z: 450 mm Spindle SA 40 Spindle exit : 125 mm Spindle speed: from 32 to 1600 RPM Table size: Length 1050 mm x Width 620 mm Manual table travel: 225 mm Table rotation at 360° Swivel table at +/- 30° Scale 3 axes ACU-RITE Sensory drilling Feeds spindle not working Clutch speed used Lubricant pump Voltage: 380 V Width: 2000 mm Depth: 2100 mm Height: 2500 mm Weight: 3 T
Drilling / Jig Boring Machine CONSTANT SUPEMEC type P65 Travel X: 500 mm Travel Y: 300 mm Travel Z: 550 mm Cone: SA40 Spindle speed: from 77 to 1520 RPM Table size: Length 1200 mm x Width 420 mm Maxi distance spindle nose/table: 670 mm Mini distance spindle nose/table: 120 mm Throat depth: 300 mm Variable speed drive for X - Y Voltage: 380 V Width: 1600 mm Depth: 1800 mm Height: 2400 mm Total width with control panel: 2700 mm Weight: 3 T
CNC lathe Okuma Genos L200E-M with gantry Control: OSP-200LA-R Year of manufacture: 10/2012 max. turning length 380 mm Turning diameter 200 mm Turning diameter over bed 450 mm Spindle speed: 107 - 4,500 rpm Spindle passage: 66 mm Turret: M-V12 (VDI) Speed tools: 50 - 6,000 rpm Rapid traverse m/min: X: 20 / Z: 25 Accessories/Equipment - Gantry loader type ATPGR-03 workpiece dimensions Ø 20 - 150 mm, workpiece weight max. 2 x 3 kg (Double Gripper) for OKUMA Genos L200E-M -Conveyor - Touchsetter - Hydraulic tailstock -Coolant pump - Tool package
Key data: 65 mm
CNC Turning and Milling Center CNC lathe used CNC universal lathe Manufacturer: Traub Type: TNA 300 Year of Make: 1996 Spindle ø 65mm Tailstock Powered tools Conveyor Control TX8H FlexIPS Collet chuck with collets from 5mm to 65mm Three-jaw chuck Various tool holders fixed, rotating and angle-rotating Etc... incl. bar loading magazine Traub DNH 61 3000, year of construction 1996 incl. many accessories! Location of the machine: Nahe 93047 Regensburg The machine can be viewed on site. It is still energized and works perfectly. We would love to hear from you.
Baguette - Long Roller Sinmag Model: SM2-380 Baguetto Capacity: min. 50 - max.1200 g depending on TA with felt ribbons for soft doughs Rolling width: up to max. 750 mm Outlet plate extendable DGUV V3 tested Connection: 400V, 550 Watt, 16A-CEE plug Dimensions: 995 x 690 x 1595/1650 mm, WxDxH Insertion height 1480 mm Weight 258 kg NEW Machine 24 Months Warranty + Spare Parts Service Option: Leasing & Rental Service Maintenance contract E-Box Service Package Mobile undercarriage Guided tour for loaf of bread Delivery Instruction & Commissioning More TOP machines in stock for you!
for all light/dark leftover breads etc. "the universal shredder" Model: RBZ 4 Stainless steel Capacity hrs./ 600 kg dry Strainer 5 mm ( included) Connection 400V, 4 kW, 16A-CEE plug Dimensions: 630 x 730 x 1455 mm, WxDxH Ejection height 455 Weight 70 kg New device 12 Months Warranty + Spare Parts Service Option: Leasing & Rental Service Other sieves Service Package Maintenance contract Instruction & Commissioning Visit our large bakery equipment exhibition!
used
Twin Turret Twin spindle type CNC Lathe Control Unit: Siemens 840 D Turning diameter: 140 mm Turning length: 480 mm Distance main-spindle - subspindle: 720 mm Main spindle hole diameter 42 mm Turret type: 12 station with VDI25 tool holder
used
Max. workpiece diameter 400 mm Max. workpiece length 800 mm Max. bar capacity diameter 80 mm Max. X-axis stroke276 mm Max. Z-axis stroke 755 mm Controller Siemens Spindle speed 4000 rpm With C axis
used
With C and Y axis Max. workpiece diameter 366 mm Max. workpiece length 708 mm Max. bar capacity diameter 105 mm Max. X-axis stroke 260 mm Max. Y-axis stroke 120 mm Max. Z-axis stroke 795 mm Controller Siemens
Key data: 520 mm, 1750 mm, 4 St.
Surface planing machine 520mm Planing width, support table 1750mm, removal table 1150mm. - Aigner strip planer stop - Angle stop 90° -45°
Spline shaft Grinding machine STANKO 3M451B/1500 with accessories.
Horizontal chipper Horacle / machine no.: H2156/62HO - Feed width: 620mm - Max. feed height: 140mm - Vibrating trough length: 5m - Power: 28 kW - Rated voltage: 400V - Rated current: 55A - Control voltage: 230V - Fuse : 63A - Frequency: 50Hz
Max. cone distance: 230 mm Number of teeth: 5-150 Diameter of taper hole at large end: 100 mm Taper: 1:19,7 Depth of taper: 150 mm Diameter of hole through spindle: 78 mm Diameter of spindle nose: 140 mm Max. offset above center: 114 mm Max. offset below center: 114 mm Max. distance from machine center to nose of spindle: 343 mm Min. distance from machine center to nose of spindle: 63 mm Cutter speeds: 17-115 rpm Feed (sec/tooth): 9-80 sec Floor space: 1900x2900 mm Net weight: 10750 kg
Weinig Profimat 23E four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 5.5kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 7.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pulling roller clamps Electric pressure beam adjustment Tabletop lubrication system Year of production 1998
FORMIT COMBI-1000 INDUSTRIAL POTATO PEELER Manufacturer: FORMIT Model: COMBI-1000 Voltage: 400 V / 3-phase Total power: 6.25 kW Industrial peeling machine for potatoes and other round or oval vegetables (for example carrots, parsnips, beetroots, turnips, sweet potatoes, etc.). Double peeling system through an abrasive peeling element and a knife peeling element: the peeling rollers are in part abrasive, in part fitted with knives. The product must be cleaned beforehand (washed or brushed). No water is required during the peeling process. Water is only needed for cleaning the machine. Made of AISI 316 stainless steel. Overall dimensions: 2,990 x 1,100 x 2,206 mm (L x W x H) Frame length: 2,280 mm Infeed hopper width: 500 mm Infeed/Outfeed height: 1,642 mm / 1,254 mm Overall weight: 1,250 kg Max. product length: 200 mm approx. 9 peeling rollers Roller len ...
REF-2391-B COMAS DRV 400 DOSING-DEPOSITING MACHINE WITH 5 NOZZLES Manufacturer: COMAS Model: DRV Type: 400 Serial no.: 3793 Year of manufacture: 2005 Dosing machine/depositor for the production of pastries Fitted with 5 standard conical nozzles (12 mm diameter) Voltage: 380V / 3-phase Working width: 400 mm Overall belt dimensions (mm): 2,200 x 530 (LxW) Overall machine dimensions (mm): 2,250 x 1,400 x 1,750 (LxWxH)
REF-2605 URSCHEL G DICING MACHINE Machine designed to cut vegetables and mushrooms into dice/cubes Manufacturer: URSCHEL Model: G Serial no.: 2450 Power: 2 HP Current cut size: 25x25x25 mm dice Overall dimensions: 1,500 x 1,200 x 1,150 mm (L x W x H)
7 axes Max. spindle passage: Ø 16 mm Max. headstock stroke: 205 mm MAIN SPINDLE Spindle speed: 10000 1/min Spindle drive power: 3.7 kW Minimum C-axis resolution : 0.001 [degrees] SUB-SPINDLE - Max. rod end Ø: 16 mm - Spindle speed : 9000 1/min - Minimum resolution C-axis : 0.001 [degrees] TOOLS 5x Turning tool holder on linear slide 4x drilling unit incl. drilling holders (front/rear) 3x driven tools for transverse machining on linear slides 4x tools incl. drill holders for reverse side machining Driven Tools Speed : 7500 1/min Conveyor Bar Feeder FMB minimag 18/3200
maximum number of results exceeded
please refine your search
